Hi,
It's been years that I've been living with the XT925 on CM11 JBBL and as I've been following latest developments on CM 12.1 and want to give it a try.
I've been searching for the past week on how to safely perform the bootloader upgrade so I can flash CM12.1. As it turns out there is a lot of disperse information on how to do it, followed by scary cases of soft bricked devices.
Current device status:
- Bootloader Unlocked
- Rooted
- CM11 M12 JBBL
- Everything works fine
What I already know:
- I have to Unroot my device
- Need to flash stock 4.1.2
- Must check if everything works once in stock
What I need help:
- Should I download OTA via the stock firmware?
- Should I flash stock recovery?
- Should I perform the update from the device or should I extract the OTA and change something and then flash it manualy?
- Is there any tutorial that I should've found on my searches?
On a sidenote: is there any chance of my bootloader to be relocked and/or loose any chance of future root access due to the OTA?
I believe that as people realise that CM12.1 is stable some noob friendly thread to the ancient JBBL's out there would be much apreciated.
Thanks in advance!
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
RikRong said:
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
Click to expand...
Click to collapse
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Can you find the firmware on MotoFirmware.com, when it's actually up?
Try this: http://motofirmware.center/files/
dirceucorsetti said:
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Click to expand...
Click to collapse
The only one firmware for xt925 available is from Canda Retail, here is the link
Related
I need to flash the stock recovery for my Maxx, but I'm not sure where I can get it. Any ideas?
why do you need it (if you are in custom recovery and hence rooted)? Are you getting ready for the OTA? I hope you have unlocked your bootloader...
Then its better to return to stock as a whole and the details are here... Yes, the recovery will be stock one and you can receive OTA without any issue. BootLoader will still remain unlocked. Re-rooting is also as simple (even after ota MOSTLY) as flashing TWRP recovery..
here it is, grab it.
its 4.4 droid maxx stock recovery.
You can find all stock firmwares here:
http://sbf.droid-developers.org/phone.php?device=4
Download the 4.4 file and pull the recovery.img file out and flash it with fastboot
So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
skyguy126 said:
So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
Click to expand...
Click to collapse
XdroidBD said:
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
Click to expand...
Click to collapse
Yes what this guy says will work
Almost hard bricked my phone
Tomsgt said:
Yes what this guy says will work
Click to expand...
Click to collapse
during flash gpt.bin it said preflash valadition failed and on the bootloader screen it said partition table downgraded. Used CWM backup to restore and my phone is functioning again but I am still not stock. Please tell me what I am doing wrong? I have attached a screenshot of the command prompt screen.
Q30: i encounter '(bootloader) Preflash validation failed' error message when flashing Firmware Image
You may have updated to Android 4.4.4 via firmware image or OTA update. In this case you now also have the latest version of the Bootloader. That is why you get the above output when attempting to flash a 4.4.2 firmware image. ==> simply flash 4.4.4 images instead.
If the error still occurs, even with a 4.4.4 firmware image, then unlocking bootloader will be necessary.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2537119
There is no 4.4.4 Retail US yet. You can flash 4.4.4 Retail EU just fine. Recovery flashable zip here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
I have the retail us version though. She. Will the retail us 4.4.4 be available? And one important question when I do go back to stock 4.4.4 with the link you gave me via recovery, will my custom recovery get overwritten with the stock one?
XT1032 is a Global GSM model. you can flash an XT1032 ROM from anywhere in the world and it will work.
It's currently unknown when 4.4.4 US Retail will be available, but I do not think it will take too much longer.
Those zip files only include ROM and Kernel. Recovery will not be changed.
I'll be trying that tomorrow and I'll let you know if it works or not asap. But for now thanks!
You might also need to flash the 4.4.4 EU Retail radio zip available here:
http://forum.xda-developers.com/showthread.php?t=2649763
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
skyguy126 said:
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
Click to expand...
Click to collapse
Please help my phone is stuck in CWM recovery during the flash and I think the recovery is frozen. Can I hard reboot back to recovery or is my phone totaled? :crying:
This worked for me - http://forum.xda-developers.com/mot...-gpe-4-4-4-t2824377/post55768571#post55768571. Once back to 'base' you can update to 4.4.4 OTA or flash another ROM. And if you get stuck again, re-run this process. Three downloads, a few scripts to run; double-click easy.
Good luck.
Back at stock, just had to give CWM 10mins! Thanks everyone!
Thank you guys in advance for your help but I just had a few questions. I am running 4.4.2 currently with the stock rom rooted and unlocked bootloader. I have however issued a few Mods such as extreme power saving and built in tether. Can I just load the 4.4.4 firmware and radios, switch back to stock recovery and take the OTA to 4.4.4 without having to wipe anything or since I have used some mods do I now have to wipe my device and put everything back after getting the 4.4.4 update. The reason I ask is I like having the stock features while just using google now launcher on top of sense. Also would any of you have a recommendation on a ROM to achieve this same thing so I dont have to go through this everytime I want to take the newest OTA if it is not possible to take without wiping.
jpgetter said:
Thank you guys in advance for your help but I just had a few questions. I am running 4.4.2 currently with the stock rom rooted and unlocked bootloader. I have however issued a few Mods such as extreme power saving and built in tether. Can I just load the 4.4.4 firmware and radios, switch back to stock recovery and take the OTA to 4.4.4 without having to wipe anything or since I have used some mods do I now have to wipe my device and put everything back after getting the 4.4.4 update. The reason I ask is I like having the stock features while just using google now launcher on top of sense. Also would any of you have a recommendation on a ROM to achieve this same thing so I dont have to go through this everytime I want to take the newest OTA if it is not possible to take without wiping.
Click to expand...
Click to collapse
Flash the ruu here. That will get you to 4.4.3 the easy way and make you 100% stock so you can take the ruu. Then flash twrp and flash su or the rooted Rom of your choosing.
The RUU is one way to go, although I would never update via OTA...
Another would be to flash the firmware and radios from here:
http://forum.xda-developers.com/showthread.php?t=2723159
And then Scott's rooted stock rom from here:
http://forum.xda-developers.com/showthread.php?t=2914922
He usually has them up a few hours after a new OTA has been released. Even better - try his stock, debloated CleanROM once it's out.
This way you can keep your recovery. You can even try to just flash the 4.4.4 firmware and radios and see if it runs your current 4.2 ROM ok. But I would not update the rom from version to version without a wipe.
The setup is the price to pay for getting a new and hopefully better Android version.
Hi, I'm actually on CM11 using the moto_msm8960_jbbl, because I haven't update my bootloader since I don't really understand how to do that. So I'm root, have an unlocked bootloader (with the bootloader unlocked warning when I power on my phone). I use a XT925 (RAZR HD from France)
I find threads like this (because I try to search a bit before asking ):
http://forum.xda-developers.com/droid-razr-hd/help/cm11-jbl-vs-kkbl-t2923070
http://forum.xda-developers.com/showthread.php?t=2760840
http://forum.xda-developers.com/droid-razr-hd/help/xt925-updating-to-kk-fail-bootloader-t2929997
http://forum.xda-developers.com/showthread.php?t=2783912
But I don't know what must I do to install rom based on the kkbl, like moto_msm9660 CM11 or Dirty Unicorn, which needs an updated bootloader.
Can you please enlighten me, or explain me ?
Thanks, and sorry for my bad english :angel:
UP
you need to bring your device to KK stock first. There are many ways like in the second thread you posted. Or even easier here:
http://forum.xda-developers.com/dro...tutorial-make-motorola-razr-hd-xt925-t2916465
Once you upgrade to KK then you can flash any custom kk rom you wish cause you will have kk bootloader.
Have fun mon ami
OK thanks
It will directly download the Stock version of Kitkat? Will I lost recovery and root access, or will I just be able to flash another rom like actually?
Wait a minute Champ there is no kk stock.
first you need to get back to 4.1.2 stock, rtfr
So I download the file from here: http://forum.xda-developers.com/showthread.php?t=2032284
Code:
Branding: Vodafone France
Version: 9.8.2Q-8-XT925_VQU-27 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
So I use this to flash the thing from the previous link, then I use your link. And after it, I'm able to install KKBL-based roms, like Dirty Unicorns?
follow instructions here:
http://forum.xda-developers.com/dro...tutorial-make-motorola-razr-hd-xt925-t2916465
and yes you will be able to get Unicorn and even some pop corn later
Hello again. I can't find a way to get root or install another recovery again.
I've try with this: http://forum.xda-developers.com/showthread.php?t=2154995
It seems to doesn't work, now I can't boot in recovery, even on the ugly Motorola's recovery. What I've done wrong? How can I regain root access and flash ROMs? I've also try the Safestrap installer (apk) but it forceclose when I try to open the app.
stay away from those tools man, you dont need them. Just find twrp 7.1.0 and fllash it with fastboot or follow this:
http://forum.xda-developers.com/dro...orial-how-to-root-motorola-xt925-4-4-t2935574
My "problem" is solved, thanks a lot ! :good:
Hello,
I have a rooted Verizon HTC One M8 running on Android 4.4.2. I do not have the stock recovery and for some reason I am unable to flash CWM, so I am stuck with TWRP. I keep receiving notifications that Lollipop is available to install, but it fails each time I try to install it because I am rooted. How can I unroot and get back to my stock ROM so that I can install the update?
No need to update via OTA. Just follow the instructions here and you'll be on rooted 5.0.1 stock
http://forum.xda-developers.com/ver...u-m8vzw-5-0-1-s-off-onlynewest-t3047103/page3
Questions
Thank you for the reply. Are you 100% sure this is compatible/will work with my phone? If I flash the ROM and it doesn't work, can I simply flash a backup image I made to recover? And when I flash the ROM, will I lose all the data on my phone? Also, where may I download my stock recovery? I searched all over the internet and couldn't find one for the Verizon version of the HTC One M8.
Thank you
That RUU is a complete stock firmware package, including the recovery. Read the OP.
But if you're just looking for the stock recovery you can find it here: http://forum.xda-developers.com/showthread.php?p=52017763
That alone won't let you take the OTA though. If you modified your stock rom the OTA will fail.
You can find a complete stock rom elsewhere here on XDA, but why the trouble if you have it all in one neat package with the RUU?
Thank you very much for the help and useful information.
Sorry to bother you with all the questions but I have one more. How do I make a backup of my stock recovery? Say I went out and bought a new phone, how would I backup that stock recovery?
Image Update Error
Error fixed now