Hello
I wanted to update my Xperia M2(Kitkat ->Lollipop). Well Something went wrong and i had red light and Image with dead Android.
I was a little scared but i decided to flash new Rom with flashtool. I did it many times on my old Xperia P(Great phone ;p). Well after finished and successful update( No error in Flashtool ) i wanted to turn on my Xperia and ... it's brick, No lights, Reset Button and Power button don't work. I tried PC Companion repair too, can't use flashmode (Volume - doesn't work).
Computer sometimes doesn't recognise my M2.
1. Debbuging USB is off, i suppose
2. Unkown applications off
Flashtool 18.5
PC Companion the newest update
Please Help me , I'm reallly desperate. Phone was new and a bit expensive .
Nazerin said:
Hello
I wanted to update my Xperia M2(Kitkat ->Lollipop). Well Something went wrong and i had red light and Image with dead Android.
I was a little scared but i decided to flash new Rom with flashtool. I did it many times on my old Xperia P(Great phone ;p). Well after finished and successful update( No error in Flashtool ) i wanted to turn on my Xperia and ... it's brick, No lights, Reset Button and Power button don't work. I tried PC Companion repair too, can't use flashmode (Volume - doesn't work).
Computer sometimes doesn't recognise my M2.
1. Debbuging USB is off, i suppose
2. Unkown applications off
Flashtool 18.5
PC Companion the newest update
Please Help me , I'm reallly desperate. Phone was new and a bit expensive .
Click to expand...
Click to collapse
There is a hole near the sim card slot, try to press the button in the hole with something sharp and retry to put your phone in flashmode. I hope this will help you
Sorry, dont work for me . It doesnt't start . Maybe battery is down? When i started flashing , it had only 30%
Should always make sure you have plenty of charge in the battery that's why ota updates don't work with less than 50% battery life. Have you tried leaving it charging overnight without touching it.
D2303 5.1lollipop customised NCB rooted LB t2u nut dual recovery bravia engine+x-reality debloated
I tried Charging without sim and sd, but i tried turn on phone while it was charging
///// EDDITED//////
Wel, i have little news. Baterry is full (3.7V i checked it ) but on Output It's 0. Something Block it in battery.
Can I reset this **** or something?
(Turn on Volume -dont work , OFF- Dont work)
If I recall correctly, Vol- is for Fastboot, Vol+ for Flashmode.
Try to re-flash your correct .ftf (M2 Dual -> D2302, M2 -> D2303, M2 Aqua -> D2304). First, try without wipe Cache/Data (in Flashtool -> Flashmode), but check "Reset customizations" (if it's fail, check "No final verification" too). Recommend fw is 18.3.1.(whatever).1.17 (KitKat 4.4.4), what you can easily root.
EDIT:
Before you connect your M2 to PC, use a sharp pin to turn off your phone (tiny hole next to the SIM card).
Flashmode = volume down (-) green light blink
Fastboot = volume up (+) blue light
Sent from my D2303
Same pro
I flashed new lollipop ftf using FlashTool and forgot to exclude SIMLOCK.ta.
Although I have working android, there is no SIM and also I am not able to flash any new recovery or boot.img .
I ihave downgraded to KK and JB but had the same problem. when I check the unlock status it is:
Rooting Status: Unknown.
also for sim properties I have:
[ ] Network 0
[ ]Network Subset 0
[ ]Service Provider 0
[ ]Corporate 0
[ ]SIM 0
Some one knows the solution?
Well, If I could flash my M2 , It was wonderfull ;p, but my Xperia is dead. I cant use flashmode or fastboot. Secret Reset button doesnt work too ;p . First My Xperia must be alive , soon flash kit kat ;p. But I Dont know how to rescue my dead Xperia. And This 's my Problem.
Without flashmode or fastboot don't think there is much you can do try reading this thread
http://forum.xda-developers.com/showthread.php?p=38567003
D2303 5.1 customised NCB LB t2u nut dual recovery rooted de-bloated bravia engine 2+x-reality
Well, mine Xperia also wonnt read SIM anymore... Was rooted with King root and is on official Lollipop, and when i did reset all from menu- after that-when it booted system- no sim card??? Why? i did repaire with Sony Tolls(ex Companion) and still the same- no SIM on Lollipop? Is there any solution??? Before reset to factory settings SIM worked just fine... Any help? D2303.
Related
I was Upgrading my Xperia miro and something went wrong and it got dead. I go through lot of forms but every form missing some information that's why i decided to create my form to save others trouble.
Hardware NEED
1.Xperia Miro Dead
2.USB cable
3.PC/LAPTOP
SOFTWARE
1. FLASH TOOL
http://www.flashtool.net/download.php
2.Xperia Miro Official Firmware Files
http://www.firedrive.com/file/7834C0B2C9D49265
or
http://www.putlocker.com/file/7834C0B2C9D49265
THAT'S ALL LET"S PERFORM RESURRECTION CEREMONY
STEPS
Steps
Install FLASH
Now Copy Xperia Miro Official Firmware File.tft to FLASH Installed Folder eg:Copy ftf to (C://flashtool/firmwares).
Open Flashtool. (Run Flashtool)
Plug it in USB while holding vol- button (hold vol- until Green LED light blinks).
Click on big lightning button.
.Choose flashmode.
Choose correct ftf (left side), do not touch anything else and click ok.
Wait.
Image will show up on your computer - Turn off your phone.
Wait
Image will show up on your computer - Turn off your phone.
It may take a while to turn on (Don't panic).
Enjoy
And now the taboo has been performed and Your Xperia Miro is Back to life again. Have fun and be careful next time.:victory:
Sony Xperia miro drivers wanting by Flashtool
Hi MR./MASTER./MRS
My phone just stopped after installing 'Jelly Bean Mini Project ROM'. I flashed from ext SD, but ended in bricking it. Now I cant use my phone.
Only Black screen ,vibrate when I press power button AND tuning between Green LED and Blue LED can be done any time
Now when I try to flash the phone with official (ftf) firmware with flashboot, the error says:
" 30/016/2014 19:16:40 - ERROR - Drivers need to be installed for connected device.
30/016/2014 19:16:40 - ERROR - You can find them in the drivers folder of Flashtool."
I'm sure that I hv installed as it says, but still the error shows up.
P.S I have done nothing with Bootloader
Picture of FLASHTOOL error saying and SONY XPERIA MIRO connected is in attachment.
A BIG THANKS FOR HELPERS!!
Hey guys, so I was updating to latest Kitkat firmware OTA and the android guy with the red exclamation point appeared and boot looped.
So, I used Flashtool to correct this and... the phone died.
Can't power on, doesn't vibrate, no SONY logo, no LED blinking, nothing.
Windows installs drivers for QHSUSB_BULK and that's it.
In device manager it appears as SOMC Flash Device anda flashtool detects it but, I can't do anything about it.
15/012/2015 00:12:50 - INFO - Device connected with USB debugging off
15/012/2015 00:12:50 - INFO - For 2011 devices line, be sure you are not in MTP mode
That's what I get.
From searching around I think the boot partition is gone (?)
Does anyone know how to fix this? I'm completly stuck here.
Did you try to turn it off with reset by the sim card? Then hold volume down (- button) connect to usb and flash ftf.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Dzepar said:
Did you try to turn it off with reset by the sim card? Then hold volume down (- button) connect to usb and flash ftf.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Thanks for the quick reply!
Just did now, still the same thing.
PTGageto said:
Thanks for the quick reply!
Just did now, still the same thing.
Click to expand...
Click to collapse
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Miche1asso said:
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Click to expand...
Click to collapse
I've been using that button since forever...
Do you think it's related to the loader partition or something?
Maybe you ran out of battery? Does your phone charger when you plug in? Also try different usb, reboot your pc then try again. I had softbrick my phones few times but always fix it with Flashtool.
Press power off button (small one by the sim) and leave the phone, Open Flashtool, select ftf wait for the popup dialogue, press volume down, connet phone to usb. This is proces i always do.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Dzepar said:
Maybe you ran out of battery? Does your phone charger when you plug in? Also try different usb, reboot your pc then try again. I had softbrick my phones few times but always fix it with Flashtool.
Press power off button (small one by the sim) and leave the phone, Open Flashtool, select ftf wait for the popup dialogue, press volume down, connet phone to usb. This is proces i always do.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Well, I tried everything.
I sent it to SONY now, thanks anyway guys
PTGageto said:
Hey guys, so I was updating to latest Kitkat firmware OTA and the android guy with the red exclamation point appeared and boot looped.
So, I used Flashtool to correct this and... the phone died.
Can't power on, doesn't vibrate, no SONY logo, no LED blinking, nothing.
Windows installs drivers for QHSUSB_BULK and that's it.
In device manager it appears as SOMC Flash Device anda flashtool detects it but, I can't do anything about it.
15/012/2015 00:12:50 - INFO - Device connected with USB debugging off
15/012/2015 00:12:50 - INFO - For 2011 devices line, be sure you are not in MTP mode
That's what I get.
From searching around I think the boot partition is gone (?)
Does anyone know how to fix this? I'm completly stuck here.
Click to expand...
Click to collapse
Hello i know this is diferent phone but maybe this help somehow to repair http://forum.xda-developers.com/showthread.php?t=2476972
http://forum.xda-developers.com/showthread.php?t=2582142
http://forum.xda-developers.com/showthread.php?t=2477595
i repair my phone with same problem QHSUSB_BULK
Miche1asso said:
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Click to expand...
Click to collapse
OMFG I LOVE YOU , YOU HAVE NO F*CKING IDEA HOW MUCH
Thanks again dude .
I got stucked by flashing the bootloader upgrade to root it ( gonna de-bloat it 'cause i need more space for some more 2pac songs ). Gonna retry now !
help
can not send him for assistance because I no longer invoice how do I make my xperia call back
you save my life, thank you
I have the same problem, hard brick
FrWhyMe said:
OMFG I LOVE YOU , YOU HAVE NO F*CKING IDEA HOW MUCH
Thanks again dude .
I got stucked by flashing the bootloader upgrade to root it ( gonna de-bloat it 'cause i need more space for some more 2pac songs ). Gonna retry now !
Click to expand...
Click to collapse
Can you help me? i have a Sony Xperia M2 (D2306) bootloader locked with hardbrick, not enter to flash mode, the pc not detect, and not power on, only when i plug the usb, but only 1 second, in the first sony logo (no bootanimation) and i get bootloop
please help me :C sorry for my bad english
Have a good read through this thread it may be of some help
http://forum.xda-developers.com/showthread.php?p=38567003
D2303 5.1lollipop customised NCB LB rooted Nuts t2u dual recovery bravia engine 2+x-reality debloated viper audio
Boot Loop may be a problem
If your device get disconnected every 5-7 seconds than it is a bootloop which is not showing on screen but you can observe it in device manager
And you have to try different key combination to stop that boot loop while flashing
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
hello there...any new solutions? i think my xperia v getting hard brick...just detect on device manager as qualcom...problem is cant charging....cant turn on...no nothing....please help
Hello
Recently i flashed my m2 with latest lollipop frimware with flashtools, i just excluded "userdata" and "cache" to save my data on the phone BUT after a full flash progress i ended up with a almost dead phone.
no flashmode,fastboot or any indicator led
when i connect the cable flashtool says:
"Device connected with USB debugging off
For 2011 devices line, be sure you are not in MTP mode"
I think whole boot section wiped , Any idea what should i do ?
and by the way any one knows where is the test point on its board ?
Thanks in advance
mory_zh said:
Hello
Recently i flashed my m2 with latest lollipop frimware with flashtools, i just excluded "userdata" and "cache" to save my data on the phone BUT after a full flash progress i ended up with a almost dead phone.
no flashmode,fastboot or any indicator led
when i connect the cable flashtool says:
"Device connected with USB debugging off
For 2011 devices line, be sure you are not in MTP mode"
I think whole boot section wiped , Any idea what should i do ?
and by the way any one knows where is the test point on its board ?
Thanks in advance
Click to expand...
Click to collapse
Try to reboot the phone by holding 10sec vol+ and Power keys when the phone is plugged. Your phone should reboot in fastboot mode and then unplug and it should be powered off.
If you coming from KK to LP do fresh install with wiping everything.
Good Luck.
Sent from my D2303 using Tapatalk
tromine said:
Try to reboot the phone by holding 10sec vol+ and Power keys when the phone is plugged. Your phone should reboot in fastboot mode and then unplug and it should be powered off.
Click to expand...
Click to collapse
Nothing Happens
mory_zh said:
Nothing Happens
Click to expand...
Click to collapse
There's a hole by the sim card, press it with some sharp pin (i use paperclip) then hold volume down connect to usb, you should connect in Flashmode.
Good Luck.
Sent from my D2303 using Tapatalk
Hello.
I have the same problem, any solution?
Try doing a software repair via sonys pcc see if this helps, you should always wipe the phone clean when using flashtool to avoid any problems
D2303 5.1 customised NCB LB rooted Nuts t2u dual recovery bravia engine+x-reality debloated
[email protected] said:
Try doing a software repair via sonys pcc see if this helps, you should always wipe the phone clean when using flashtool to avoid any problems
D2303 5.1 customised NCB LB rooted Nuts t2u dual recovery bravia engine+x-reality debloated
Click to expand...
Click to collapse
pls can u provide flash tool ?
XDADEVX said:
pls can u provide flash tool ?
Click to expand...
Click to collapse
XDA have pretty good search engine, try it.
Sent from my D2303 using Tapatalk
Dzepar said:
XDA have pretty good search engine, try it.
Sent from my D2303 using Tapatalk
Click to expand...
Click to collapse
Revived M2 thnx
mory_zh said:
Hello
Recently i flashed my m2 with latest lollipop frimware with flashtools, i just excluded "userdata" and "cache" to save my data on the phone BUT after a full flash progress i ended up with a almost dead phone.
no flashmode,fastboot or any indicator led
when i connect the cable flashtool says:
"Device connected with USB debugging off
For 2011 devices line, be sure you are not in MTP mode"
I think whole boot section wiped , Any idea what should i do ?
and by the way any one knows where is the test point on its board ?
Thanks in advance
Click to expand...
Click to collapse
Did anyone come up with a solution for this? I have the exact same problem right now. Tried the little button near the SIM card slot, tried charging. Phone won't boot into flashmode, or fastboot. No LED-s flash at all.
Donwlaod flashtool and choose flash mode then press vol down and connect it to computer. Without enabling USB debugging also it will go into flash mode. Then jusy flash kitkat or lolipop and dont forget to wipe data this time
Sudin said:
Donwlaod flashtool and choose flash mode then press vol down and connect it to computer. Without enabling USB debugging also it will go into flash mode. Then jusy flash kitkat or lolipop and dont forget to wipe data this time
Click to expand...
Click to collapse
The phone WILL NOT go into flash mode nor fastboot. No LED-s blink when trying to do so, nothing happens when I connect the charger or press the power button.
Try having a good read through this thread it may be of some help.
http://forum.xda-developers.com/showthread.php?p=38567003
When using flashtool always best to wipe cache and user data to avoid problems especially when going from kk to lollipop and vice versa a clean wipe n install always works wonders also use 9.18.6 or older version of flashtool they work better. Also try leaving it on charge over night
D2303 5.1lollipop customised NCB LB rooted Nuts t2u dual recovery bravia engine 2+x-reality debloated viper audio
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
I think I was not suppose to do a full factory reset and then flash Cyncyanogen 12.1. Can this phone still be fixed?
I should have realised that I could not flash non stock custom ROMS when my device cannot be unlocked. I should have downloaded Z5 style in Android development.
droyjul said:
I think I was not suppose to do a full factory reset and then flash Cyncyanogen 12.1. Can this phone still be fixed?
Click to expand...
Click to collapse
Dis you try to flash original ftf for your model ?
It is fine now
Gauravs deodexed z2 port works well aswell.
D2303 5.1 deodexed z2 port+z5+X apps+themes, be,xr,sv,ad,XZRt2urecovery,xposed,z5 cam2.0,xLOUD,S-Force,viperaudio+more
I hard bricked my phone for 2 times but I managed to fix it
REQUIREMENTS
Usb debugging should be on
Xperia M2 stock ftf
Pc companion
Flashtool
First install the right usb driver for your phone downloadad install Pc Companion same as Flash tool get a pin and press the OFF butto near sim card slot for 5secs after charge it for 1 hour you should see a red led while charging. And then remove the charger and plug the usb cable I know that it can't be recognize but there's a way. Press the OFF button near sim card slotfor 5secs press the powerbutton and volume down at same time open Pc Companion wait for Pc Companion to recognize and release the 2 button eait for Pc Companion to recognize your phone don't release it yet if Pc Companiom didn't recognize try it again. Then go to flashtool click the lightning logo or button whatsover click flashmode click te 3 dots find where you put the stock ftf flash and wit for fastboot message then press the 2 button again wait for PcCompanion to recognize it and taraaa done.
Xperia m2,deodedexed,xposed,2.0 cam,themes,x reality,xperia 4.6 style,modded buildprop tweaks and more..