Related
Hi guys,
I have decided to make this thread to help the people who are not sure how to fix their brick. We get a lot of threads with people panicking because their phone is bricked. I wanted to avoid this, by making this general guide to get rid of that awful brick. I know that there is already a thread like this available, but it faded away and I wanted to be more clear. It can be found here: http://forum.xda-developers.com/showthread.php?t=1849170. I find it a bit messy... If I'm offending someone, please say so! I'm not trying to bash Toledo_JAB!
Ok, now that has been made clear we can start
First of all, I want to give you a few tips to avoid a brick and how to prepare for it.
1. Make sure to have your phone’s battery charged 100%. Just to be sure.
2. Always make a back-up of your data. Just root your phone, download Titanium Backup and back up those precious apps! When rooting is too much for you, use Helium(formerly Carbon) or Mobile GO. Both work fine. If you have a custom recovery installed, make a Nandroid. This is a copy of your whole phone in the state before the brick, and recovering this will get your phone back to the land of the living.
3. Just avoid the ‘’vold.fstab trick’’. It is dangerous and can cause hard bricks(yes, hard bricks!)
4. Always be prepared that it could happen. When unlocking the bootloader, it can happen. When giving incorrect permissions to a system app, it can happen. BE PREPARED, AND JUST MAKE A FRIGGIN’ BACK-UP!
What is a brick?
A brick(on an Android device) is when there are uncorrectly modified system files that cause your Android device not to boot. Your device will refuse to boot completely, because it can’t simply load some stuff that are vital for the eventual boot-up. Something you don’t want, right?
Before we can begin, you have to know there are two kinds of bricks. Soft bricks and hard bricks. The most important difference between these two is that a soft brick can be fixed, and a hard brick can’t be fixed!
The most common sign of a soft brick will be that when you boot your phone the bootanimation will play, then freeze and then start all over again. This is also known as a ‘’bootloop’’. Sometimes the phone won’t reboot automatically, but just keep booting and booting without loading Android correctly. You can let it boot for a day, but it won’t work and your battery will die. Don't worry, we can fix this!
The most common sign of a hard brick is that your phone won’t do anything. No, really. Nothing. Try not to panick when you see this, but keep calm. If you have your warranty, you can laugh like a maniac because Sony will send you a new one. If not, still try to follow the steps listed below.
Let’s start. There is a difference between people who have a custom recovery, and people who don’t have a custom recovery.
People with a custom recovery can restore their Nandroid(if you have made one, ofcourse…).
People without a custom recovery will have to follow my humble steps.
Method 1: use Androxyde’s mighty Flashtool to flash a stock .ftf.
For extra info, use this extremely detailed guide: http://forum.xda-developers.com/showthread.php?t=2240614 . It says Xperia Z, but it is the same for the E.
1. Download Flashtool from here: http://www.flashtool.net/index.php
2. Install it. Now locate the folder where you installed it(probably C:/Flashtool). Open the drivers folder, and run the file inside it.
3. In the huge list, scroll down to the bottom and tick the ‘’flashmode’’ and ‘’fastboot’’ drivers. A common misunderstood problem is that you need the specific phone drivers, and that the drivers for the Tipo(dual), Miro, J and E(dual) are missing. But this isn’t a problem, I can assure you. Those have been automatically be installled when you plugged your phone in your computer the first time.
4. When installed, make sure to download a stock .ftf firmware for your device. These are the Android images that have been released by Sony, which have been manually pulled of the phones.
For Tipo, see here: http://forum.xda-developers.com/showthread.php?t=2001567
For Miro, see here: http://forum.xda-developers.com/showthread.php?t=1998277
For J, see here: http://forum.xda-developers.com/showthread.php?t=2385526
For E, see here: http://forum.xda-developers.com/showthread.php?t=2553609
Pick one you like . It doesn’ actually matter. Download it, and put it in the C:/Flashtool/firmwares folder.
5. Open Flashtool. If you’re on a 64bit computer, pick the 64bit version.
6. Click the thunder icon in the upper left corner.
7. Tick ‘’flashmode’’.
8. Select your .ftf. You can try to untick ‘’data’’ and ‘’cache’’, and then flash. Perhaps your apps will still be there! If this doesn’t work, you can tick them.
9. Hit ‘’flash’’. Flashtool will prepare the files.
10. A popup window will appear. Now, listen carefully: be sure that your phone is off, and get your micro USB cable. First: put it in the computer. Now, what you have to do is press(and hold) the volume down button and plug the cable in your phone. A green led will apppear.
11. Let Flashtool flash! After it’s finished, boot your phone and see the magic happen .
Note: sometimes you get an error with system.sin. To fix this, pick another firmware or redownload the same and delete the ‘’prepared’’ folder in C:/Flashtool.
This should work! If not, try the methods listed below, and otherwise don’t be shy to ask. If the led turns green you are completely safe. Try another computer and avoid Windows 8.
Method 2: even simpler than method 1, but it should work fine. We will be using Sony Update Service.
1. Download the SUS from here: http://www.sonymobile.com/global-en/tools/update-service/
2. Run, and accept the license agreement.
3. Locate your device, click it and hit ‘’next’’.
4. Now follow the instructions. It’s as simple as that.
5. Your data will definitely be erased, but your phone will be fixed again!
Note: Sony Update Service will refuse to work for devices with an unlocked bootloader. If your bootloader is unlocked you have no other choice than to use the Flashtool method.
This should work fine!
Method 3: my least favorite method. It didn’t work for me, but perhaps it will for you. Just try. We will be using the Sony PC Companion software… If you haven’t already installed it, do it from here: http://www.sonymobile.com/global-en/tools/pc-companion/
Make sure that your phone is powered off!
1. Disregard any instructions to connect the phone until you complete step 9
2. In the welcome screen you will see the different modules available for you including the "support zone" option. Click on "Start" below it.
3. On the next page Click on "Start" under "Phone/Tablet Software update"
At this point if you get an error stating that "unable to install update components" or "server is bussy" Please proceed to step 12. If you not see that error then continue with step 4.
4. The program will show a window saying "Could not find phone/tablet". Click on the option below that reads: "Repair my phone/tablet" the program will issue you a warning on the content that you will lose during the update
5. Choose the option to continue.
6. The program will issue a final message warning you of possible data lost during the update. Click on the checkmark and then on "Next/Continue".
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose the Phone from the list then click on "next" then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then wile pressing and holding the volume down button, connect the cable to the phone and keep holding the volume button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
10. If you failed to follow the steps correctly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar", If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If the phone is connected properly, PC Companion will proceed with the update ( It will tell you to let go of the back key) then wait for the update to finish and follow instructions on screen to disconnect the unit.
This tutorial doesn’t belong to me. It is fully copied from here: http://talk.sonymobile.com/t5/Xperi...ctions-using-Pc-Companion-Windows/td-p/249946
I do not own any rights, I just want to share to make it easier to use. Full credits go to Francis .
These methods should have helped you! If not, don’t hesitate to ask!
Hard bricked users, I can’t help you, sorry . If this doesn’t work, I am sorry.
Allright! That's it!
Just a few requests
1. If you seek help, don't quote the whole original post(OP). Please!
2. Don't make useless posts! If you want to thank me, press that button. If not, that's fine too. I don't mind.
3. Be polite and try to be as clear as possible in english. I know some of you don't speak it very well, but please, try your best!
Have a nice day, and I hope this helps!
hi!
i tried all 3 methods (on win 8)
none work
method 1
says
Code:
05/029/2014 18:29:56 - INFO - <- This level is successfully initialized
05/029/2014 18:29:56 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
05/029/2014 18:29:56 - INFO - You can drag and drop ftf files here to start flashing them
05/030/2014 18:30:04 - INFO - Device disconnected
05/030/2014 18:30:10 - INFO - Selected ST23i_4_0_4_xperia.ftf
05/030/2014 18:30:10 - INFO - Preparing files for flashing
05/030/2014 18:30:42 - INFO - Please connect your device into flashmode.
05/030/2014 18:30:57 - INFO - Device connected in flash mode
05/030/2014 18:30:57 - INFO - Opening device for R/W
05/030/2014 18:30:57 - INFO - Reading device information
05/030/2014 18:30:57 - INFO - Phone ready for flashmode operations.
05/030/2014 18:30:57 - INFO - Current device : ST23i - YT9100P9HP - 1265-6133_R4D - 1261-5091_11.0.A.5.5 - WORLD-i_11.0.A.5.5
05/030/2014 18:30:58 - INFO - Start Flashing
05/030/2014 18:30:58 - INFO - Processing loader
05/030/2014 18:30:58 - INFO - Checking header
05/030/2014 18:30:58 - INFO - Ending flash session
05/030/2014 18:30:58 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
05/030/2014 18:30:58 - ERROR - Error flashing. Aborted
05/030/2014 18:30:58 - INFO - Device connected in flash mode
05/030/2014 18:30:59 - INFO - Device disconnected
05/031/2014 18:31:01 - INFO - Device connected in flash mode
method 2 dont have miro in devices offered
method 3
wont start at all
ok i fixxed it with ST23i_11.0.A.2.10_Generic and help from this post
messmeww said:
you can try push this file >>> http://www.mediafire.com/?j27mk33p62pb60k to your FTF file using 7zip, and flash your ftf file again after do that ^_^
Click to expand...
Click to collapse
if mediafire link don't work try here
Loader.sin
for Androxyde’s mighty Flashtool to flash a stock .ftf. METHOD,
is there risk of bricking your phone????///
mine is currently in bootloop now... its in there since I was trying to unlock bootloader ..cmd says its successfully done but as I plugged it out its not starting since then - only bootloop
Nikhil_android said:
for Androxyde’s mighty Flashtool to flash a stock .ftf. METHOD,
is there risk of bricking your phone????///
mine is currently in bootloop now... its in there since I was trying to unlock bootloader ..cmd says its successfully done but as I plugged it out its not starting since then - only bootloop
Click to expand...
Click to collapse
No. Flashtool will only fix the bootloop, not cause a new one.
Mats
IMP- About drivers automatically getting installed (fastboot & flashmode drivers have to be manually installed)
1)works on Win7, Win8 not on XP
2)you must be connected to the internet for automatic driver install (& also it must be enabled in settings somewhere[if you get "serching for drivers" its enabled])
3)Win8 not reliable as windows 7 so......... 7 recommended
---------- Post added at 11:49 AM ---------- Previous post was at 11:46 AM ----------
Nikhil_android said:
for Androxyde’s mighty Flashtool to flash a stock .ftf. METHOD,
is there risk of bricking your phone????///
mine is currently in bootloop now... its in there since I was trying to unlock bootloader ..cmd says its successfully done but as I plugged it out its not starting since then - only bootloop
Click to expand...
Click to collapse
if you got bootloop you did it correctly .....flash stock ftf after that, you are ready
it worked
I used the first method (as that was the only option available for me) and it indeed solve the problem of bootloop.
here is what happened exactly:
I used Windows 7 32 bit pc as guide asks to avoid w8 -8.1.
followed steps exactly as said in guide but after connecting the phone (xperai E dual c 1605) there was error and flashing process was aborted but meanwhile some driver got installed. Its strange because I remember that I had installed all necessary driver (had connected my phone quite few times on this pc and had connected phone by vol down and connect to pc to get green light way as well ) and had also installed driver through flashtool as said in steps in tutorial..
anyway I rebooted my pc because I thought that would complete driver installation process and tried again but it did not worked and again some driver got installed but then this time instead of rebooting I tried again immediately and it worked this time.
So if u get error and instead some driver get installed just try again and most probably it will work
tip : use right click Run as admin on any exe file
PS : quote: . In the huge list, scroll down to the bottom and tick the ‘’flashmode’’ and ‘’fastboot’’ drivers. in latest flashtool version those options are right at top :silly:
---------- Post added at 10:39 PM ---------- Previous post was at 10:20 PM ----------
if you got bootloop you did it correctly .....flash stock ftf after that, you are ready
Click to expand...
Click to collapse
I have flashed it and everything is fine but now I am not sure whether my bootloader is locked or unlocked .. I searched but there is no definate way to tell .. in xperia Z forum some asked to flash a kernel and if you get error it means its bootloader is locked (though I am not sure if it will harm phone and again cause bootloop or not ( off cou2rse I wont flash xperia Z kernel on xperia E dual ))
Nikhil_android said:
I have flashed it and everything is fine but now I am not sure whether my bootloader is locked or unlocked .. I searched but there is no definate way to tell .. in xperia Z forum some asked to flash a kernel and if you get error it means its bootloader is locked (though I am not sure if it will harm phone and again cause bootloop or not ( off cou2rse I wont flash xperia Z kernel on xperia E dual ))
Click to expand...
Click to collapse
type *#*#7378423#*#* in dialer (only on stock rom/ftf)
go to Service info > Configuration >
If "Bootloader unlock allowed" says "yes" its still locked
or
If Bootloader Unlocked says "yes" SUCCESS!!
or
If "Bootloader Unlock Status" says "yes" SUCCESS!!
xperia
hey my xperia miro flashing is nt starting only please help
awesomesal said:
hey my xperia miro flashing is nt starting only please help
Click to expand...
Click to collapse
This forum exists to help you, but we can't do that with this information!
Please answer this questions:
-Can you get into flashmode? Phone off, USB in computer then hold volume down button while inserting USB in phone. A green LED will show.
-When you start the phone, does it vibrate?
-Is there a red LED blinking when you start the phone?
-What have you done with your phone that it became bricked like this?
That should give us the information we need.'
Mats
xperia
yes i can go in flashmode , it vibrate while on simply and no red led while simply on the phone.
I off ma alarm n wen i tried to open the patren it got stuck n nw stuck at sony logo.
I dint unlock bootloader neither its rooted
Thank u
You forgot Sony's flashtool method and of course for UBLs flashing kernel to get cwm
awesomesal said:
yes i can go in flashmode , it vibrate while on simply and no red led while simply on the phone.
I off ma alarm n wen i tried to open the patren it got stuck n nw stuck at sony logo.
I dint unlock bootloader neither its rooted
Thank u
Click to expand...
Click to collapse
I don't see the problem then. Yes, you are in a boot loop. OK, use flashtool to flash a stock .ftf. Method 1 of the tutorial.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
xperia
whch al driver r needed n how much tym it wl take to flash.
ok.
So I got similiar problem - I bought bricked phone to fix and sell further , I don't know what was happen to it.
1. ...---> When I turn on it vibrate once and blink green led
2. I can get flashmode - I flash soft via flashtool and vias SUS - both with succes - but when I turn on it vibrates ....--> goto1.
Is there any suggestion? Or sell it further as is it is just to retrieve money :laugh:
Miro ST23i
LindaCento said:
ok.
So I got similiar problem - I bought bricked phone to fix and sell further , I don't know what was happen to it.
1. ...---> When I turn on it vibrate once and blink green led
2. I can get flashmode - I flash soft via flashtool and vias SUS - both with succes - but when I turn on it vibrates ....--> goto1.
Is there any suggestion? Or sell it further as is it is just to retrieve money :laugh:
Miro ST23i
Click to expand...
Click to collapse
Try using flashtool. It always works for me.
Q&A for Xperia C bricked while flashing recovery through mobile uncle
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Xperia C bricked while flashing recovery through mobile uncle. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP! Xperia C Stuck on Sony Logo
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Sony Xperia C Unbrick
Hi... I came across this problem recently while installing CWM using MobileUncle Tools without changing the Boot-version. If your Boot-version is not supported, then you need to first convert it to the suitable Boot-version. There is a seperate Xperia C XDA thread on install CWM on both the Boot-versions. Now in your case, you have flashed a wrong recovery which has bricked your device.
Here is a step-by-step guide on how to un-brick your Xperia C. This worked for me. Hope it works for you too...
1. Firstly, remove the back-cover of your Xperia C and remove any sim or memory card, if connected.
2. Now, search for a small hole with "RESET" written below it.
3. Use a pen to press it. Hold it there for a minute. Then leave it and put the back cover back.
4. Charge your device for about 10 minutes.
5. If you do not follow the above steps, you won't be able to repair your device through PC Companion.(The update stops showing "Download error or error 1200). This is because your device still has MobileUncle Tools and unsupported Recovery image installed in it which does not allow the stock Recovery to be installed. When you reset by following the above method, only the stock apps are left in the device, deleting every other app.
6. Now download and install the latest Sony PC Companion from the official site, to your PC.
7. Open the PCC and click start in support zone. Let PCC download and install the required files.
8. In the next menu, select the software update option. Instead of clicking on install, select "Repair" device which is highlighted in blue.
9. Follow the steps until PCC starts to prepare your PC for software update.
10. In the device selection menu, select Sony Xperia C C2305 and click next.
11. When the next menu appears, disconnect any USB or multimedia drives attached to the PC. Now, first connect your original Sony USB cabel to the PC. Then, turn off your device(If the device is not turning off i.e. switching on after connecting the USB cable, read the instructions given at the end). Wait for five second. Press and hold volume down button of your device and connect the USB cable to your device. A green led appears on your device if the device is connected properly.
Note: If a continous red led appears instead of green, do not worry. Keep the device connected to PC intact for about 5 to 10 minutes. It will turn green. This is because, bricked devices take some time to be recognised.
12. Now the update process starts. If all the above steps are performed correctly, then surely the Device Software Update process completes without any errors or stopping in between.
13. Then click finish in the last menu after Device Software Update Completes.
14.Disconnect Xperia C from PC and press the Power button.
15. Xperia C boots up. Do not worry if your screen isn't the way it should be(e.g. whitish at the edges and the Sony Wave logo lagging). As this is the first boot-up after software update it takes sometime to recover to it's earlier charm. After about a minute or two, your device will be perfectly all right.
Note: The first boot-up takes some time(about 5 to 7 minutes).
16. So, this is it. You will have your Sony Xperia C perfectly working if you follow the above steps cautiously.
Hint for step no. 11: Follow this only if your device turns on after connecting the USB cable:
1. First, let the USB cable be connected the PC.
2. Force switch off your device by pressing Power + volume up buttons for about 10 to 15 seconds when it is stuck at Sony logo.
3. When the device turns off, immediately leave the two buttons and press and hold volume down button and connect the USB cable to the device, before the device turns on.
4. Now your device would be properly connected and the green led appears.
Hope this helps you. If you have any other queries regarding the same, please do inform.
my Xperia C is switchoff while flashing recovery from mobile uncle tools
I have downloaded the file 6mb recovery.img file and through mobile uncle tools i was updating... all was going well it ask me r u sure to flash i pressed ok and my phone became dead ...Now it is not starting....!!!!Plzzz Help me ....!!!:crying:
verondelarosa said:
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Click to expand...
Click to collapse
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
relly helped ,me guys thanks buddie
thanks bro, i m happy now my phone is working again
I hope it was useful (if it was so hitthank)
Just I want from you I little thing : give the link that you have download th ftf. from
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
my flashtools shows drivers not found please help.
rkumbhar said:
my flashtools shows drivers not found please help.
Click to expand...
Click to collapse
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
n78 shadow said:
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i installed all the drivers but still sony xperia c not getting detected
rkumbhar said:
i installed all the drivers but still sony xperia c not getting detected
Click to expand...
Click to collapse
It's not detected when Flashtool requests to connect the phone or not at all
If it's not detected when Flashtool requests to connect the phone try to connect it before the flashing proccess.
And don't forget to connect it in flashmode by holding the vol- key and connect it to Pc
Phone still not detected in Fastboot mode
I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.
fixed
OTE=ajithmemana;61619257]I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.[/QUOTE]
Ok don't worry I have the same problem before because I using Mobile uncle without change boot version thast leave the phone in charge sometimes after that connect it in the pc by cable then run PC combain it will guide you to connect the phone when the red light appear and download the original software as you know it will tell you to press the power key with the volume key until the phone connect with the program .
It work with me tell me if not
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
Unable to flash to...through "wmshua"...it gives me an error..."FLASH FAILED" and some times "CONNECTION UNSTABLE"
AND Also tried "Flash Tool" too.....it gives me an error ..........plz help
probably my phone is bricked because i tried using mobile uncle and opened up a recovery image downloaded from this site.. but now my phone is not booting... neither is giving any light while i plug in the USB
HELP ASAP
did not work for me xpria pc companion gives an error when i use software update .... after a big wait ... of initializing ... and the device alwayes gives red light ... for a time then after 10 miniutes it turns off .... i don't know what to do .. !!!
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Can you send me the link please [email protected]
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
I think I was not suppose to do a full factory reset and then flash Cyncyanogen 12.1. Can this phone still be fixed?
I should have realised that I could not flash non stock custom ROMS when my device cannot be unlocked. I should have downloaded Z5 style in Android development.
droyjul said:
I think I was not suppose to do a full factory reset and then flash Cyncyanogen 12.1. Can this phone still be fixed?
Click to expand...
Click to collapse
Dis you try to flash original ftf for your model ?
It is fine now
Gauravs deodexed z2 port works well aswell.
D2303 5.1 deodexed z2 port+z5+X apps+themes, be,xr,sv,ad,XZRt2urecovery,xposed,z5 cam2.0,xLOUD,S-Force,viperaudio+more
I hard bricked my phone for 2 times but I managed to fix it
REQUIREMENTS
Usb debugging should be on
Xperia M2 stock ftf
Pc companion
Flashtool
First install the right usb driver for your phone downloadad install Pc Companion same as Flash tool get a pin and press the OFF butto near sim card slot for 5secs after charge it for 1 hour you should see a red led while charging. And then remove the charger and plug the usb cable I know that it can't be recognize but there's a way. Press the OFF button near sim card slotfor 5secs press the powerbutton and volume down at same time open Pc Companion wait for Pc Companion to recognize and release the 2 button eait for Pc Companion to recognize your phone don't release it yet if Pc Companiom didn't recognize try it again. Then go to flashtool click the lightning logo or button whatsover click flashmode click te 3 dots find where you put the stock ftf flash and wit for fastboot message then press the 2 button again wait for PcCompanion to recognize it and taraaa done.
Xperia m2,deodedexed,xposed,2.0 cam,themes,x reality,xperia 4.6 style,modded buildprop tweaks and more..
Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back
Use sony xperia companion and it will download and flash the proper firmware for your phone.
I had been in similar situation twice.
nri_tech1183 said:
Use sony xperia companion and it will download and flash the proper firmware for your phone.
I had been in similar situation twice.
Click to expand...
Click to collapse
ok let you know if it works
I have A Similar Problem But in my case I have the access to flash and enter in fastboot, but simple, everything that I try don't work, Sony make good phones, but is too complicated in other some parts. I Hope that you can fix your phone, I don't have the same lucky ._.