first working solution for huawei y520-u22 100000%
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter .
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in sdcard .
reboot in recovery philztouch and install zip from sdcard.
update superSu from playstore.
install busybox from playstore.
open mtkdroid
click root
click imei/nvram and enter your both imei than replace imei.
reboot your phone and all done 1000000%
enjoy making money
Regards,
Kerkeni Team.
thanks to Djanis + Hat07
( you will find link of all tools on description )
hat07 said:
first working solution for huawei y520-u22 100000%
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter .
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in sdcard .
reboot in recovery philztouch and install zip from sdcard.
update superSu from playstore.
install busybox from playstore.
open mtkdroid
click root
click imei/nvram and enter your both imei than replace imei.
reboot your phone and all done 1000000%
enjoy making money
Regards,
Kerkeni Team.
thanks to Djanis + Hat07
( you will find link of all tools on description )
Click to expand...
Click to collapse
after rooting imei/nvrm still nonfunctional i cannot fix my imei on my huawei y520-u22
daimen.king said:
after rooting imei/nvrm still nonfunctional i cannot fix my imei on my huawei y520-u22
Click to expand...
Click to collapse
Explain more, have repaired the phone , reboot it than imei still null or u r not able to repair it after rooting it!
Envoyé de mon iPhone en utilisant Tapatalk
good
Good
y520-u22
hamza.7 said:
Explain more, have repaired the phone , reboot it than imei still null or u r not able to repair it after rooting it!
Envoyé de mon iPhone en utilisant Tapatalk
Click to expand...
Click to collapse
Sir,
I followed all the instruction, but when i press the button "replace imei" in MTK Droid Tool, it shows an error i.e
--->>> Connect to device <<<---
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
--- ERROR ttycmd1 device NOT found!
As I have flashed new ROM "Y520-U22V100R001C328B111". I cannot find baseband in settings>about phone
Radio is OFF (check through mobileuncletool, phone information). Phone never shows signals.
Kindly guide, how could I fix these problems (invalid imei, radio off). I have no backups
Regards
desertrose4aj said:
Sir,
I followed all the instruction, but when i press the button "replace imei" in MTK Droid Tool, it shows an error i.e
--->>> Connect to device <<<---
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
--- ERROR ttycmd1 device NOT found!
As I have flashed new ROM "Y520-U22V100R001C328B111". I cannot find baseband in settings>about phone
Radio is OFF (check through mobileuncletool, phone information). Phone never shows signals.
Kindly guide, how could I fix these problems (invalid imei, radio off). I have no backups
Regards
Click to expand...
Click to collapse
You need to fix baseband first then write imei, use any mt6572 nvram
Envoyé de mon GT-I9505 en utilisant Tapatalk
y520-u22
NVRAM restore didn't work for me, in my case.
I have to turn on the RADIO signals first. My phone shows Radio-Off in mobile uncle tools MTK Android menu. It never turns on, when i press that button. MTK Droid tool & SN Write Tool are failed to solve my problem, Unless
I got the SOLUTION ?
SOLUTION is;
I have Complete Format Flash the phone (y520-u22) in SP Flash Tool, Reinstalled the firmware from scatter file, then Flashed CWM Recovery using scatter file, then Wiped All phone for Fresh Rom Install in CWM Recovery, and finally Installed the ROM (update.zip downloaded from official website *************111 version) from external sdcard using CWM Recovery. (Phewwwww) ?
New Rom also had the NVRAM and IMEI problems, but i noticed that Phone RADIO-ON. ???
Result: The solution to problem with my phone was to Turn on the Radio Signals.
After doing this, your method to fix IMEI just worked like a charm ??
Regards
download link pls ?????
Related
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Root and CWM for Karbonn Smart A26
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Thank you so much!
Cant find the drivers.... pls help
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
mtorero4 said:
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
Click to expand...
Click to collapse
Mediatek VCOM Drivers Check out here : http://forum.xda-developers.com/showthread.php?t=2206421
Important Note: Your phone should be OFF before connecting it to the computer, after pressing Download button in SP Flashtool. OFF means pull out battery and put it in again. This ensures the phone is OFF. If switched OFF phone is connected for charging/usb the phone turns ON; phone is not fully OFF even if nothing is shown on screen. So pull out battery. ONLY If you connect the OFF phone to computer you will be able to detect the device and install Mediatek Vcom drivers as well as use flashtool.
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
team.radiant said:
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
Click to expand...
Click to collapse
Follow step 7 of the thread I posted before: http://forum.xda-developers.com/showpost.php?p=38337401
In brief :
Generate ROM_ with SP FlashTool
Prepare ROM_ in MTK Droid Root & Tools
Build CWM
USB Drivers
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Can U Please Attach the USB Drivers For Karbon A26
mukesh kitty said:
Can U Please Attach the USB Drivers For Karbon A26
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
help
I flashed cwm but it doesn't reboot to recovery plz help,!!!!!
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro
can u pls anyone share me the original "void.fstab" file of karbonn smart A26 mobile which willl be in system/etc folder...
As i tried swapping for low storage problem,from then it was corupted and now i want to replace it with original file as i havnt backuped it.
---------- Post added at 05:24 PM ---------- Previous post was at 04:39 PM ----------
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro,can u pls give me karbonn a26 vold.fstab orginal file
Custom Recoveries are Here!
Gello! Karbonn A26 Users Here are the Custom Recoveries For Karbonn A26 Ported Be Me...
Includes:-
★Philz
★TWRP
★CWM
★Carliv
★Cannibal
etc...
Please Press Thanks If this Post Helped!
Here is the Download Link To The Thread :- :good:
★http://forum.xda-developers.com/android/development/karbonn-a26-custom-recoveries-t2828608★
Try VROOT
VROOT works with this device...
VROOT is very good software !!!!
download from my signature
:good::good::good::good::good::good:
How to install recovery.img ?
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Hello Friend, can you tel me how to install recovery image that you have generated?
How to increase incoming call volume in custom rom lollipop in karbonn a26
Dear All,
I have installed custom ROM lollipop in my karbonn A26.
but incoming ring volume is very low so please help me how to increase volume with Es file explorer or terminal command.
hi fnds i had a bricked mmx a110 phone. for that [email protected] has given a wonderful idea that is
1.First of all download and extract the following file to any specified folder........
A.STOCK JELLYBEAN.RAR
B.SP FLASH TOOLS
*************THE PASSWORD OF SP FLASH TOOLS IS "[email protected]" (without quotation marks)****************
2.now remove ur fone's battery and keep it aside.
3.go to the folder where u have extracted sp flash tools. Run it as administration.
4.click on scatter loading option and browse for the folder where u have extracted jb(or ics rom).
5.now click on firmware upgrade option if flashing jb or if flashing ics click download option.
6.connect ur fone to pc.
Let the process complete. After it completes reinsert the battery and switch on ur fone.
And wid this u should have successfully unbricked ur fone..
Note:U will observe dat ur fone is unrooted again and cwm or twrp recovery has been replaced by stock recovery.
Click to expand...
Click to collapse
i've followed it exactly & i got my phone back with stock rom.
now the only problem is even though i've checked usb debugging mode on in my phone & connecting it to pc to root my phone by using ""one click method/ root with bin4ry/ unroot pro"" it is showing pls connect ur device with usb debugging on even though i have put it in on mode.
but i'm getting like s9081 autoplay window when i connect my phone to pc.
so pls help me
all the thing i want is only root. of there is any way of rooting my phone with out pc it will be very good,
otherwise pls help me to solve above problem.
thank u a lot in advance
Hello, I have a problem with my Lenovo A369i. I rooted my device and tried to install ChainFire and plugged the battery out and inserted in. It had stuck on bootloop so then I tried to flash stock rom to it via SP Flashtool but the "Download" button didn't work and said "Error 4032:Enable DRAM failed........." so I clicked on "Firmware Upgrade" button and phone worked (Build number ROW_S111_140522) but it doesn't detect SIM card (IMEI codes are invalid and I could't fix it from engineering mode "AT Command Send" didn't work) and camera doesn't work also (not so important for me though) how can I fix it guys ? When I try that thread "http://forum.xda-developers.com/showthread.php?t=2560607" SP Flash tool says "pmt changed for the rom it must be downloaded". Please help me I have no important data in my phone I wiped the data and cache partition also but nothing worked :crying:
(Baseband version : A369i.V2,2013/08/14 14:37)
(Android version : 4.2.2)
(IMEI codes both invalid, no system upgrade required it says also)
Help me asap please...
Grains said:
Hello, I have a problem with my Lenovo A369i. I rooted my device and tried to install ChainFire and plugged the battery out and inserted in. It had stuck on bootloop so then I tried to flash stock rom to it via SP Flashtool but the "Download" button didn't work and said "Error 4032:Enable DRAM failed........." so I clicked on "Firmware Upgrade" button and phone worked (Build number ROW_S111_140522) but it doesn't detect SIM card (IMEI codes are invalid and I could't fix it from engineering mode "AT Command Send" didn't work) and camera doesn't work also (not so important for me though) how can I fix it guys ? When I try that thread "http://forum.xda-developers.com/showthread.php?t=2560607" SP Flash tool says "pmt changed for the rom it must be downloaded". Please help me I have no important data in my phone I wiped the data and cache partition also but nothing worked :crying:
(Baseband version : A369i.V2,2013/08/14 14:37)
(Android version : 4.2.2)
(IMEI codes both invalid, no system upgrade required it says also)
Help me asap please...
Click to expand...
Click to collapse
Hello,
You may try flashing stock firmware for your device here
-Vatsal
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
Here are few names which have same cpu as LYF F1 i.e. Qualcomm Snapdragon 617 Processor:
Alcatel Idol 4,Sharp Aquos 507SH,Kyocera DuraForce Pro,Huawei G9 Lite,ZTE ZMax Pro,BlackBerry DTEK50,ZTE Axon Max,HTC One A9,ZTE Axon 7 Mini,Nubia Z11 Mini,Coolpad Max,Samsung Galaxy C5,Moto G4 Plus,Moto G4.
I have found the stock rom at the link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0".
Can anyone help please?
Good news for all the users of LYF F1 who wants to have twrp and root access.
I found the stock rom at link "http://www.smartfirmwares.com/forum1/index.php?topic=189.0"
I extracted the stock rom and got the stock recovery,then I got the twrp recovery of ZTE Axon 7 Mini.
I ported the twrp by replacing only the zImage from the stock to the twrp,and kept the ramdisk the same in twrp.
It booted up well but I got a error that twrp could not mount any partition except the recovery.
I then got the twrp of Moto G4 Plus,but the twrp did not have the ramdisk,it only contains zImage,so I could not port it.
I then got the twrp of Samsung Galaxy C5 and ported it in the same way,but it put the phone into recovery bootloop,phone was booting into twrp,then switching off,then again booting to twrp,at one moment when phone was switched off for one second,I flashed again the previous working recovery.
I then ported the twrp recovery of ZTE Axon Max but it gave the same error that it could not mount any partition except the recovery.
Then I ported the twrp recovery of ZTE Nubia Z11 Mini and this one was successfull without any error,but the recovery was in chinese.I can not remember the whole thing but the first window appeared in front,I touched the lower right conrer and changed the language to english,since then everything is in english.The link of that recovery is "https://drive.google.com/open?id=0B2iZIwRNj3bpaEl3dWR1eXRsalk" and password is "Created-by-Tarasantan"
Now How did I flashed the twrp,I downloaded and extracted the stock rom,then I found a "_qcMUP.zip" within the zip "LYF F1 LS-5505 TOOL & DRIVERS.zip",then extracted the zip _qcMUP.zip,there in the support folder I found some windows softwares,I ran all of them to install the drivers and neccessary files.
Then in the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder I replaced the stock "recovery.img" with the twrp "recovery.img".And then I ran the "qcMUP.exe" in the _qcMUP folder which I previously extracted.
Now I clicked the do button in the upper right corner of "qcMUP.exe",then clicked upgrade,then I selected the "LYF F1 LS-5505 PC SW VER 01_06 By Gsm_F!rmwares_Tm" folder.
Now I switched off the phone,then I pressed and hold volume up and down at the same time,and pluged the phone into the computer and the flashing started on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing was going on.
This will clear all the apps and data you previously have had in your internal memory.So you can back up all the installed app with es filexplorer,or super backup,and all the contacts and smses with super backup,then you must move all the backed up things and other neccessary things to the sd card.At the end put the latest supersu.zip in your sd card.
The next part is very important,when flashing is passed,you will unplug the phone from the computer,then press and hold the power and the volume up at the same time.You will be booted up into twrp then somehow change the language to english from chinese,then flash the supersu.zip from your sd card,if you do not boot into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that it does not replace the twrp recovery with the stock.
Alternatively
you can use the following method.I have not tested this method,but this should work.In this method you just need to download this file "TWRP For LYF F1.7z",from https://drive.google.com/open?id=0B2iZIwRNj3bpanRsaUM0OEdYV3c ,password is Created-By-Tarasantan .This recovery is made for exactly LS-5505,that means ro.product.device is LS-5505 ,ro.product.locale is en-IN and other properties are also changed for LS-5505.
Download and Extract the "TWRP For LYF F1.7z" file,then install the given drivers,then run the "qcMUP.exe".
Now Click the do button in the upper right corner of "qcMUP.exe" window,then click upgrade,then select the "LYF F1 LS-5505 TWRP 3.0.2" folder.
Now switch off the phone,then press and hold volume up and down at the same time,and plug the phone into the computer and the flashing should start on qcMUP.exe window with a light blue bar filling up with a deep blue colour as the flashing is going on.
This will not clear any apps and data that you previously have had in your internal memory.So you do not need to back up anything.But you need to put a supersu.zip in your sd card.
The next part is very important,when flashing is passed,unplug the phone from the computer,then press and hold the power and the volume up at the same time.Your phone should be booted up into twrp,then flash the supersu.zip from your sd card,if you do not boot your phone into twrp and flash the supersu.zip then whenever you will boot into the system,the twrp recovery will be replaced with the stock recovery,when you flash the supersu.zip,it patches the boot.img so that the boot.img does not replace the twrp recovery with the stock one.
Link of a image of the window which will come when you first time boot into twrp
https://drive.google.com/open?id=0B2iZIwRNj3bpbTgySjdfRFZKUzg
Hey i am also have lyf f1 5505 ia want to root plz give me all the recommended links and processs
Plz help the lyf user
hi bro need help
twrp is password protected plz provide password
---------- Post added at 05:28 AM ---------- Previous post was at 05:05 AM ----------
thankyou ls5505 root done .............................................................................
Plz give me password.
plz sir give me password
AyanRangrez said:
plz sir give me password
Click to expand...
Click to collapse
Please Read the full post, password is Created-By-Tarasantan
Sir please give me Lyf f1 twrp password please in am very tensed
Vishul saxena said:
Sir please give me Lyf f1 twrp password please in am very tensed
Click to expand...
Click to collapse
R u being serious read the first post well dear! Or have a glass of water before that then re-read it again! I have mentioned so many times go through the pages! We are here to help you people not serve you! Read the whole topic.
Hii.. I need some help.
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Hello sir thank for the that wonderful information but i want help, i root my phone with help of your process full flash phone with twrp file but now my volte features is gone after flashing i try and remove recovery and flash with original stock rom then reboot normally but still my volte feature not enable i try with *#*#4636#*#* and check setting but there nothing happen i download universel volte patch file download from xda forum patch 1 and patch 2 and install through recovery after reinstall recovery but problem still same before install twrp my airtel sim was work on volte calling+4g but now lte only work no calling i was hide every thing with magiks manager but nothing was solve can u pls help me what should do thanks
Needsupport said:
I need some help regarding the flashing method....what i mean is ... that is it possible to unlock its bootloader by those fastboot , etc. commands and then flashing twrp recovery ???
Click to expand...
Click to collapse
Yes u can but why u want to unlock when u install twrp recovery everything is in ur control after install magiks manger so many root app will solve many problem
Guys, kindly provide me a latest firmware for ls5505.