How to boot Coolpad 8013 in download mode?
Buman said:
How to boot Coolpad 8013 in download mode?
Click to expand...
Click to collapse
try this app
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
or this
https://play.google.com/store/apps/details?id=com.jc.rebootmanager
well am in a brick loop situation the phone i want to flash it like connect to pc while in download mode and flash it .is there any way to enter download mode using hardware buttons?
Buman said:
well am in a brick loop situation the phone i want to flash it like connect to pc while in download mode and flash it .is there any way to enter download mode using hardware buttons?
Click to expand...
Click to collapse
oh, sorry, I dont understood you.
okay how can i get in download mode without an app ?
Buman said:
okay how can i get in download mode without an app ?
Click to expand...
Click to collapse
To boot into download mode on phones with ICS and up:
Turn off the phone, then press and hold the volume down key + the power key at the same time.
This should boot you into download mode.
If it doesn't, you may have to try different button combinations such as volume down + the home key + power key (holding them when the phone is off simultaneously to turn it on).
Also, on some phones you might have to pull out the battery (when connected to a USB) and do the combinations listed above for it to work.
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
ansh712 said:
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
Click to expand...
Click to collapse
Download your stock firmware and flash using Odin.
maxal said:
Download your stock firmware and flash using Odin.
Click to expand...
Click to collapse
Doesn't work. It still gives me the same error. NAND Write FAIL.
ansh712 said:
Doesn't work. It still gives me the same error. NAND Write FAIL.
Click to expand...
Click to collapse
Are you using Odin 3.10.6?
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
mattlou said:
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
Click to expand...
Click to collapse
Same here looking for the G920FXXU1AOCZ 5.1.1 firmware. Can't find it anywhere.
roydok said:
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
Click to expand...
Click to collapse
There is no 5.1.1 firmware yet for G920FXXU1AOCZ. If you have a link or can upload one I'd be very grateful. Also I can flash any 5.1.1 G920FXXU1AOCZ firmware right?
From what country do come from or where you bought your S6?
---------- Post added at 08:04 AM ---------- Previous post was at 07:55 AM ----------
Based on the CSC (XME) you mentioned on your title you can try flashing this G920F 5.1.1 Malaysian ROM via Odin:
http://www.sammobile.com/firmwares/download/49468/G920FXXU2BOFO_G920FOLB2BOFF_XME/
I am in the UK and I bought it from O2
Here you go UK O2 5.1.1:
http://www.sammobile.com/firmwares/download/49735/G920FXXU2BOFJ_G920FTEF2BOF1_O2U/
I am in India bought it from Malaysia. My phone is XME-G920F. I was just able to flash another 5.1.1 ROM from another Asian region (XEF). Somehow that worked. Sadly now I have to fix region lock since I didnt make a call before leaving Malaysia.
Reflash using the Malaysian 5.1.1 posted above.
roydok said:
Reflash using the Malaysian 5.1.1 posted above.
Click to expand...
Click to collapse
Will that fix sim lock ?
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Sounds like you have a fake Chinese phone.
maxal said:
Sounds like you have a fake Chinese phone.
Click to expand...
Click to collapse
Yup, I do ha, downloaded phone info and checked.
ansh712 said:
Will that fix sim lock ?
Click to expand...
Click to collapse
One way to find out. Flash the Malaysian ROM.
---------- Post added at 10:28 AM ---------- Previous post was at 10:26 AM ----------
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Yup, might be a not so geniune S6...
roydok said:
One way to find out. Flash the Malaysian ROM.
Click to expand...
Click to collapse
I did flash the malaysian rom. Didn't fix it.
I'm all sorted now thank you. Just getting an annoying security notice every 5 minutes which is annoying.
Sent from my SM-G920F using Tapatalk
I've got a Chinese not 4 trying to root but when i try to put it into download mode by pressing volume down power etc it comes up with 5 lines of chinese writing which is download mode? Please help someone
When nyou get the 5 chinese lies the connect it to pc and when it is detected then press volume up button and you will enter the download mode
abaziz0786 said:
I've got a Chinese not 4 trying to root but when i try to put it into download mode by pressing volume down power etc it comes up with 5 lines of chinese writing which is download mode? Please help someone
Click to expand...
Click to collapse
You got into recovery mode. Just look up options on Google Images.
Thank you buddy
Hi guys,
I just bought S6 and here are problems that I encountered:
Phone is unbranded, sim-locked, I performed factory reset too (soft).
1. Firmware installed is 5.0.2 and I wanted to update to 5.1.1 but there is no option in About Device -> Software update. This button is simply missing ! First time I see something like this
2. I did soft factory reset again, still missing.
3. I wanted to do hard reset but after holding up volume up+home+power and selecting factory reset option I get "No command" message and phone reboots to normal operation.
4. Smart Switch nor Kies sees my phone. Phone is detected by windows and I can access the storage. (I tried with all of the USB modes)
Has anyone encountered things like that ?
Lukasz
Sounds like a clone
dogan2010 said:
Sounds like a clone
Click to expand...
Click to collapse
Can I check it ? I can connect to galaxy apps though...
Hmmm download antutu ...do a test .post screenshot and we know if its a clone or not
Simple to find the clone or original. . Are you able go to download mode by after power off vol down + home + power key
Sent from my SM-N920C using Tapatalk
sendhiloo7 said:
Simple to find the clone or original. . Are you able go to download mode by after power off vol down + home + power key
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Ive seen clones who enter in download mode that way... the most acurate way is antutu or any benchmark
Take time Phone INFO because you see more.
In a fake as well as other hardware is installed.
Hello All. Trying to root my UNLOCKED 703L on B211 EMUI4.0 on Android 6.0: I want to root but when I try to get to bootloader I get a screen trying to update phone but stops at 5 percent. I got the phone from ebay so I dont know why its doing that. Anyway I want to root vai ADB but cant put phone in boot mode to flash! HELP!!!! Thanks. PS Also where can I get stock firmware for my specific phone? THANKS!
http://forum.xda-developers.com/p8max/general/p8max-rollback-android-6-to-android-5-t3502646
http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213
http://forum.xda-developers.com/p8max/general/p8max-android-6-update-files-t3377145
Hirs_E_Fruit said:
http://forum.xda-developers.com/p8max/general/p8max-rollback-android-6-to-android-5-t3502646
http://forum.xda-developers.com/p8max/general/p8max-root-guide-d-701l-d-703l-t3269213
http://forum.xda-developers.com/p8max/general/p8max-android-6-update-files-t3377145
Click to expand...
Click to collapse
Thanks again but when I go to put phone in bootloader/fastboot mode, I hold power button and vol down button down.. What I get is a screen trying to update something and it says update failed???? How can I put phone in bootloader/fastboot mode so I can use ADB to root? Thanks
http://www.droidviews.com/how-to-bo...astboot-download-bootloader-or-recovery-mode/
Hirs_E_Fruit said:
http://www.droidviews.com/how-to-bo...astboot-download-bootloader-or-recovery-mode/
Click to expand...
Click to collapse
Thanks but I could not figure this out. Flashify needs root and Im not sure why I cant get my phone to bootloader to use ADB... I updated phone per your instructions so Im at B212 but now want to root. Please help me. Thanks!
Power Oloff your smartphone, connect it to a PC via USB.
Hold volume down (Vol -) button and then power on your phone (hold volume down till your phone Shows the fastboot Screen).