Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
ansh712 said:
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
Click to expand...
Click to collapse
Download your stock firmware and flash using Odin.
maxal said:
Download your stock firmware and flash using Odin.
Click to expand...
Click to collapse
Doesn't work. It still gives me the same error. NAND Write FAIL.
ansh712 said:
Doesn't work. It still gives me the same error. NAND Write FAIL.
Click to expand...
Click to collapse
Are you using Odin 3.10.6?
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
mattlou said:
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
Click to expand...
Click to collapse
Same here looking for the G920FXXU1AOCZ 5.1.1 firmware. Can't find it anywhere.
roydok said:
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
Click to expand...
Click to collapse
There is no 5.1.1 firmware yet for G920FXXU1AOCZ. If you have a link or can upload one I'd be very grateful. Also I can flash any 5.1.1 G920FXXU1AOCZ firmware right?
From what country do come from or where you bought your S6?
---------- Post added at 08:04 AM ---------- Previous post was at 07:55 AM ----------
Based on the CSC (XME) you mentioned on your title you can try flashing this G920F 5.1.1 Malaysian ROM via Odin:
http://www.sammobile.com/firmwares/download/49468/G920FXXU2BOFO_G920FOLB2BOFF_XME/
I am in the UK and I bought it from O2
Here you go UK O2 5.1.1:
http://www.sammobile.com/firmwares/download/49735/G920FXXU2BOFJ_G920FTEF2BOF1_O2U/
I am in India bought it from Malaysia. My phone is XME-G920F. I was just able to flash another 5.1.1 ROM from another Asian region (XEF). Somehow that worked. Sadly now I have to fix region lock since I didnt make a call before leaving Malaysia.
Reflash using the Malaysian 5.1.1 posted above.
roydok said:
Reflash using the Malaysian 5.1.1 posted above.
Click to expand...
Click to collapse
Will that fix sim lock ?
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Sounds like you have a fake Chinese phone.
maxal said:
Sounds like you have a fake Chinese phone.
Click to expand...
Click to collapse
Yup, I do ha, downloaded phone info and checked.
ansh712 said:
Will that fix sim lock ?
Click to expand...
Click to collapse
One way to find out. Flash the Malaysian ROM.
---------- Post added at 10:28 AM ---------- Previous post was at 10:26 AM ----------
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Yup, might be a not so geniune S6...
roydok said:
One way to find out. Flash the Malaysian ROM.
Click to expand...
Click to collapse
I did flash the malaysian rom. Didn't fix it.
I'm all sorted now thank you. Just getting an annoying security notice every 5 minutes which is annoying.
Sent from my SM-G920F using Tapatalk
Related
Hi Friends,
i had my galaxy gt-i9003 upgraded to gingerbread official rom i downloaded from xda, i have a few problems like phone going into sleep and camera not functioning, i wanted to role back to fyro but i cant get into the download mode anymore, it says POWER RESET or UNKNOWN DOWNLOAD MODE.
Please help.
Which Firmware did you flash? And, are you seeing any logo when you go to the download mode or is tit that only the text is appearing?
And DO POST THIS IN THE Q&A SECTION HENCEFORTH!
mdpasha78 said:
Hi Friends,
i had my galaxy gt-i9003 upgraded to gingerbread official rom i downloaded from xda, i have a few problems like phone going into sleep and camera not functioning, i wanted to role back to fyro but i cant get into the download mode anymore, it says POWER RESET or UNKNOWN DOWNLOAD MODE.
Please help.
Click to expand...
Click to collapse
You need to press VOL - first, then press HOME key without letting go of VOL -, then press POWER button. When you feel the unit vibrates you can let go of POWER button until Downloading mode is displayed.
hi,
i do c the android logo on d scree with the text message, odin can see the deivce on com5, but just stays at the line saying connecting to deivce. The phone it self is working, but i am not happy with the upgrade, so wanted to roll back. Please help me solve this problem. The rom i upgraded to was I9003JPKP5.
The mistake i did, i think, wast not to upgrade to kpe first and then come up to kp5, i directly did a kp5, misssed that part.
Please Please help.
mdpasha78 said:
hi,
i do c the android logo on d scree with the text message, odin can see the deivce on com5, but just stays at the line saying connecting to deivce. The phone it self is working, but i am not happy with the upgrade, so wanted to roll back. Please help me solve this problem. The rom i upgraded to was I9003JPKP5.
The mistake i did, i think, wast not to upgrade to kpe first and then come up to kp5, i directly did a kp5, misssed that part.
Please Please help.
Click to expand...
Click to collapse
you need to flahs xxkpe twice to avoid camera problem too.
Weird!!!!!!!!
Tell me the method using which you flashed the firmware. Give me all the steps!
I will tell you where you went wrong!
U need to switch the phone off to get to download mode.
Also XXKPH is a final GB release. Install that by first flashing XXKPE twice, then using the single XXKPH file as the PDA in Odin with nothing else.
Sent from my GT-I9003 using XDA App
hi friends,
thanks for your help. I was able to get to the download menu, i removed the battery and inserted it back and used the assigned keys to get to it, the reflashed the same set of files i had, now i am getting the download menu and the camera is working fine.
Will download KPE and follow the instructions given on XDA step by step for the upgrade.
Thanks a lot for you help. I really appritiate it.
Hi. I tried the method up there to go to download mode but so far I can't get there. It's so weird. I can go to the recovery mode but not the download mode. Are there any more methods to go to download mode? I press all three buttons for roughly 1 min but no vibration at all. after I let go the power button, it go to the startup and stuck there.
Thanks in advance for any opinion.
imaginarygur said:
Hi. I tried the method up there to go to download mode but so far I can't get there. It's so weird. I can go to the recovery mode but not the download mode. Are there any more methods to go to download mode? I press all three buttons for roughly 1 min but no vibration at all. after I let go the power button, it go to the startup and stuck there.
Thanks in advance for any opinion.
Click to expand...
Click to collapse
You must press the volume down+home+power button and let go at the right time
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
my s6 g920f was on 5.1.1 it was running fine after I updates to 6.0.1 came up with issue emergency calls only tried all sorts to fix it but with no luck asked some expert he told me that its the modem and flashing would fix it could anyone guide me in the right direction and help me resolve this issue my phone still says emergency call only thank you
huzi7868 said:
my s6 g920f was on 5.1.1 it was running fine after I updates to 6.0.1 came up with issue emergency calls only tried all sorts to fix it but with no luck asked some expert he told me that its the modem and flashing would fix it could anyone guide me in the right direction and help me resolve this issue my phone still says emergency call only thank you
Click to expand...
Click to collapse
You could try flashing stock 6.0.1 firmware doing the following:
1) Find your firmware here ( http://www.sammobile.com/firmwares/database/SM-G920F/) and download the correct one. (Extract to desktop after)
2) Download Odin 3.10.7 ( http://odindownload.com/ ) and open.
3) Click 'AP' and select the firmware you downloaded (May take a few minutes for it to load)
4) Turn phone off, put into download mode (Hold Volume down, Home button and Power button) and continue
5) Connect phone to laptop (while in download mode) and when it says 'Added' in Odin, click start.
Only solution I could think of to fixing your problem, remember to back up all data if you're going to flash.
Also clear cache before flashing firmware. (Phone off, hold volume up and power) and select the option, then go ahead and do your thing
emcardle660 said:
You could try flashing stock 6.0.1 firmware doing the following:
1) Find your firmware here ( http://www.sammobile.com/firmwares/database/SM-G920F/) and download the correct one. (Extract to desktop after)
2) Download Odin 3.10.7 ( http://odindownload.com/ ) and open.
3) Click 'AP' and select the firmware you downloaded (May take a few minutes for it to load)
4) Turn phone off, put into download mode (Hold Volume down, Home button and Power button) and continue
5) Connect phone to laptop (while in download mode) and when it says 'Added' in Odin, click start.
Only solution I could think of to fixing your problem, remember to back up all data if you're going to flash.
Also clear cache before flashing firmware. (Phone off, hold volume up and power) and select the option, then go ahead and do your thing
Click to expand...
Click to collapse
Hi I did what U mentioned I used this version full with pit
http://samfirm.net/threads/android-6-0-1-galaxy-s6-sm-g920f-g920fxxu3dpbg-btu-03-09-2016.62/
huzi7868 said:
Hi I did what U mentioned I used this version full with pit
http://samfirm.net/threads/android-6-0-1-galaxy-s6-sm-g920f-g920fxxu3dpbg-btu-03-09-2016.62/
Click to expand...
Click to collapse
I had to flash 6.0.1 for my UK unlocked phone and all went well, try the same firmware I used: (If your phone is UK and unlocked):
http://www.sammobile.com/firmwares/download/66426/G920FXXU3DPBG_G920FBTU3DPB1_BTU/, BUT without the pit file, when I messed my phone up, I downloaded the firmware only from this link, just one file, and flashed it without pit or anything else (and everything went perfect). Might be able to help you too, if not then I'm not sure what else to do
EDIT: Also, after flashing and everything is done, you MAY have to turn on using safe mode (only on first time), I had to as it wouldn't go past the samsung logo first time after flashing. Phone does NOT actually go into safe mode, but gets it to boot correctly (Not sure why, or how it worked after, but it did)
emcardle660 said:
I had to flash 6.0.1 for my UK unlocked phone and all went well, try the same firmware I used: (If your phone is UK and unlocked):
http://www.sammobile.com/firmwares/download/66426/G920FXXU3DPBG_G920FBTU3DPB1_BTU/, BUT without the pit file, when I messed my phone up, I downloaded the firmware only from this link, just one file, and flashed it without pit or anything else (and everything went perfect). Might be able to help you too, if not then I'm not sure what else to do
EDIT: Also, after flashing and everything is done, you MAY have to turn on using safe mode (only on first time), I had to as it wouldn't go past the samsung logo first time after flashing. Phone does NOT actually go into safe mode, but gets it to boot correctly (Not sure why, or how it worked after, but it did)
Click to expand...
Click to collapse
Thank you for that but now do I turn on safe mode
huzi7868 said:
Thank you for that but now do I turn on safe mode
Click to expand...
Click to collapse
Well if you've flashed and the firmware boots up fine, then just ignore the last part.
If not, and you get the same problem as me:
Make sure phone is off. turn on as normal (but while holding the volume down button until phone fully boots), do NOT hold the power button all the way though, just volume down
emcardle660 said:
Well if you've flashed and the firmware boots up fine, then just ignore the last part.
If not, and you get the same problem as me:
Make sure phone is off. turn on as normal (but while holding the volume down button until phone fully boots), do NOT hold the power button all the way though, just volume down
Click to expand...
Click to collapse
still the same bro not working says emergency calls only
Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Screen shots this phone was with a bad ESN and is fully working on t-mobile.
kasey348 said:
Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Click to expand...
Click to collapse
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
su660ics said:
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
Click to expand...
Click to collapse
Is the complete tar compressed on the new updates all the file are almost 2 gigs.
Pd2?
Sent from my SM-N920P using XDA-Developers mobile app
Link is broken. :{ Anyone have a mirror?
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
mlrinoc said:
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Click to expand...
Click to collapse
Already tried that, like i said.. after downloading firmware it doesn't recognize my phone.
force70 said:
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
i have the SM-G955F
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
This - you probably have the newer AQG5 bootloader, which TWRP doesn't support yet.
So follow the instructions above, flash back to the previous bootloader, the you'll be able to flash TWRP ok.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
I had the same issue once before. What the fail device info. I think I fixed it by using the most recent update (I think). And messing around with csc files. All this was done half assed in desperation. Then went back to the unlocked firmware and stopped messing with it. Yes Smart switch didn't do crap. Use updato.com to obtain your firmwares
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
Just got home and tried this! and OMG dude this actually worked! thanks!!! damn im glad my phone works again! thanks thanks thanks!! cant say it enough!!
My guide to fix the issue
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-flash-fail-fixed-solutions-t3650073
Hi, I'm new here can anyone help me my phone is stuck on bootloop keeps restarting, I've tried flashing lastest stock rom via odin and it successfully pass, tried factory reset and wipe cache partition on recovery menu but still bootloop. I badly needed help even my local shops here in our town don't know what to do. Lol. Also the recover mode says no command with an exclamation mark and a dead android logo. Any replies will be much appreciated, thank you.
markiest said:
Hi, I'm new here can anyone help me my phone is stuck on bootloop keeps restarting, I've tried flashing lastest stock rom via odin and it successfully pass, tried factory reset still bootloop. I badly needed help even my local shops here in our town don't know what to do. Lol. Also the recover mode says no command with an exclamation mark and a dead android logo. Any replies will be much appreciated, thank you.
Click to expand...
Click to collapse
press and hold your phone’s volume up button for 10-15 seconds.
2. Next, without letting go of the volume up button, press and release the power button once. It will display a menu.
3. Navigate around the menu using the volume button.
4. Select Reboot System Now and your phone should be rebooting
Alternatively, you can do the following:
1. When any of the three appears, press and hold the power button for 2-3 seconds.
2. Then, without letting go of the power button, press and release the volume up button, once. It will display the same menu.
3. Select Reboot System Now and your phone should reboot.
cooltt said:
press and hold your phone’s volume up button for 10-15 seconds.
2. Next, without letting go of the volume up button, press and release the power button once. It will display a menu.
3. Navigate around the menu using the volume button.
4. Select Reboot System Now and your phone should be rebooting
Alternatively, you can do the following:
1. When any of the three appears, press and hold the power button for 2-3 seconds.
2. Then, without letting go of the power button, press and release the volume up button, once. It will display the same menu.
3. Select Reboot System Now and your phone should reboot.
Click to expand...
Click to collapse
That doesn't work, I even tried wipe cache partition and factory reset on recovery menu, no luck at all.
markiest said:
That doesn't work, I even tried wipe cache partition and factory reset on recovery menu, no luck at all.
Click to expand...
Click to collapse
OK lets start from the beginning
Where did you get the phone from?
What firmware was on it?
What cell network are you using?
What country are you in?
Can you still get it into download mode?
Where are you getting firmware from?
What version firmware are you trying to flash?
cooltt said:
OK lets start from the beginning
Where did you get the phone from?
What firmware was on it?
What cell network are you using?
What country are you in?
Can you still get it into download mode?
Where are you getting firmware from?
What version firmware are you trying to flash?
Click to expand...
Click to collapse
1st. Phones not actually mine, it's from my uncle he bought it from US he gave it to me since he tried bringing it to local shops in our town and they can't fix it.
2nd. I don't know actually
3rd. Phone is T Mobile
4th. I'm from Philippines
5th: Yes I can go to download mode and recovery mode.
6th. I get the firmware from sammobile.
7th. I'm flashing this one USA (T-Mobile)
2019-04-01
Version
PDA
8.0.0
G930TUVS9CSC1
CSC
G930TTMB9CSC1
markiest said:
1st. Phones not actually mine, it's from my uncle he bought it from US he gave it to me since he tried bringing it to local shops in our town and they can't fix it.
2nd. I don't know actually
3rd. Phone is T Mobile
4th. I'm from Philippines
5th: Yes I can go to download mode and recovery mode.
6th. I get the firmware from sammobile.
7th. I'm flashing this one USA (T-Mobile)
2019-04-01
Version
PDA
8.0.0
G930TUVS9CSC1
CSC
G930TTMB9CSC1
Click to expand...
Click to collapse
Ok, you can try this one here which is the version of T Mobile USA just before the latest
Or try this USA unbranded version >>>here<<<
cooltt said:
Ok, you can try this one here which is the version of T Mobile USA just before the latest
Or try this USA unbranded version >>>here<<<
Click to expand...
Click to collapse
Tried it now, still the same results. Thanks tho for constantly replying to my thread sir.
up please, still didn't solve my problem.
Check to see if you're running the latest odin. New odin software should be 3.13.1. Make sure to right click and run as administrator when running the application. You could also try using different computers and USB cables. Unlikely but if it works, it works.
Also, try downloading the file from a different website, there's a possibility that the file is corrupted. https://updato.com/firmware-archive-select-model/
MrPeebles_ said:
Check to see if you're running the latest odin. New odin software should be 3.13.1. Make sure to right click and run as administrator when running the application. You could also try using different computers and USB cables. Unlikely but if it works, it works.
Also, try downloading the file from a different website, there's a possibility that the file is corrupted. https://updato.com/firmware-archive-select-model/
Click to expand...
Click to collapse
Already tried that I'm running binary 9 U9, I can't downgrade. It's not corrupt because it pass on odin.
On download mode it says
Produt name: sm-g930t
Current binary: Samsung official
System binary: Official
Frp lock: On
Warranty void: 0x0
Qualcomm secureboot: EnabLE
RP SWREV: B9 (2 ,1, 1, 1, 1,) K9 S9
SECURE DOWNLOAD: ENABLE
And on android recovery at the bottom it says.
#fail to open recover_cause(No such file or directory)#
#Reboot Recovery Cause is (Unknown)#
No support SINGLE-SKU
File-Based OTA
Supported API:3
#Manual Mode v1.0.0#
Successfully verified dmverity hash tree