my s6 g920f was on 5.1.1 it was running fine after I updates to 6.0.1 came up with issue emergency calls only tried all sorts to fix it but with no luck asked some expert he told me that its the modem and flashing would fix it could anyone guide me in the right direction and help me resolve this issue my phone still says emergency call only thank you
huzi7868 said:
my s6 g920f was on 5.1.1 it was running fine after I updates to 6.0.1 came up with issue emergency calls only tried all sorts to fix it but with no luck asked some expert he told me that its the modem and flashing would fix it could anyone guide me in the right direction and help me resolve this issue my phone still says emergency call only thank you
Click to expand...
Click to collapse
You could try flashing stock 6.0.1 firmware doing the following:
1) Find your firmware here ( http://www.sammobile.com/firmwares/database/SM-G920F/) and download the correct one. (Extract to desktop after)
2) Download Odin 3.10.7 ( http://odindownload.com/ ) and open.
3) Click 'AP' and select the firmware you downloaded (May take a few minutes for it to load)
4) Turn phone off, put into download mode (Hold Volume down, Home button and Power button) and continue
5) Connect phone to laptop (while in download mode) and when it says 'Added' in Odin, click start.
Only solution I could think of to fixing your problem, remember to back up all data if you're going to flash.
Also clear cache before flashing firmware. (Phone off, hold volume up and power) and select the option, then go ahead and do your thing
emcardle660 said:
You could try flashing stock 6.0.1 firmware doing the following:
1) Find your firmware here ( http://www.sammobile.com/firmwares/database/SM-G920F/) and download the correct one. (Extract to desktop after)
2) Download Odin 3.10.7 ( http://odindownload.com/ ) and open.
3) Click 'AP' and select the firmware you downloaded (May take a few minutes for it to load)
4) Turn phone off, put into download mode (Hold Volume down, Home button and Power button) and continue
5) Connect phone to laptop (while in download mode) and when it says 'Added' in Odin, click start.
Only solution I could think of to fixing your problem, remember to back up all data if you're going to flash.
Also clear cache before flashing firmware. (Phone off, hold volume up and power) and select the option, then go ahead and do your thing
Click to expand...
Click to collapse
Hi I did what U mentioned I used this version full with pit
http://samfirm.net/threads/android-6-0-1-galaxy-s6-sm-g920f-g920fxxu3dpbg-btu-03-09-2016.62/
huzi7868 said:
Hi I did what U mentioned I used this version full with pit
http://samfirm.net/threads/android-6-0-1-galaxy-s6-sm-g920f-g920fxxu3dpbg-btu-03-09-2016.62/
Click to expand...
Click to collapse
I had to flash 6.0.1 for my UK unlocked phone and all went well, try the same firmware I used: (If your phone is UK and unlocked):
http://www.sammobile.com/firmwares/download/66426/G920FXXU3DPBG_G920FBTU3DPB1_BTU/, BUT without the pit file, when I messed my phone up, I downloaded the firmware only from this link, just one file, and flashed it without pit or anything else (and everything went perfect). Might be able to help you too, if not then I'm not sure what else to do
EDIT: Also, after flashing and everything is done, you MAY have to turn on using safe mode (only on first time), I had to as it wouldn't go past the samsung logo first time after flashing. Phone does NOT actually go into safe mode, but gets it to boot correctly (Not sure why, or how it worked after, but it did)
emcardle660 said:
I had to flash 6.0.1 for my UK unlocked phone and all went well, try the same firmware I used: (If your phone is UK and unlocked):
http://www.sammobile.com/firmwares/download/66426/G920FXXU3DPBG_G920FBTU3DPB1_BTU/, BUT without the pit file, when I messed my phone up, I downloaded the firmware only from this link, just one file, and flashed it without pit or anything else (and everything went perfect). Might be able to help you too, if not then I'm not sure what else to do
EDIT: Also, after flashing and everything is done, you MAY have to turn on using safe mode (only on first time), I had to as it wouldn't go past the samsung logo first time after flashing. Phone does NOT actually go into safe mode, but gets it to boot correctly (Not sure why, or how it worked after, but it did)
Click to expand...
Click to collapse
Thank you for that but now do I turn on safe mode
huzi7868 said:
Thank you for that but now do I turn on safe mode
Click to expand...
Click to collapse
Well if you've flashed and the firmware boots up fine, then just ignore the last part.
If not, and you get the same problem as me:
Make sure phone is off. turn on as normal (but while holding the volume down button until phone fully boots), do NOT hold the power button all the way though, just volume down
emcardle660 said:
Well if you've flashed and the firmware boots up fine, then just ignore the last part.
If not, and you get the same problem as me:
Make sure phone is off. turn on as normal (but while holding the volume down button until phone fully boots), do NOT hold the power button all the way though, just volume down
Click to expand...
Click to collapse
still the same bro not working says emergency calls only
Related
Hi there. I need help for my device. After I rooted my Samsung galaxy core I8262 i'v planned on installing the CWM Recovery. But before that, I tried to back up my device using the TITANIUM Backup. While the backup procedure is on the process my phone shuts down (because the battery is low i guess). After then, when i turned on my phone, the boot process stops only at the SAMSUNG logo. But after a couple of restarts (maybe 10 i guess) my phones passes the boot process of the SAMSUNG logo. Now while i'm using my device I've found out some other malfunctions like:
1) I can't detect and bluetooth devices even other devices tried to detect me but its undescoverable.
2) I can connect to a hotspot device, but i cant access the Internet even if it has a connection.
So far those where the problems that i had encountered yet after the backup problem occurs. What should I do in this kind problem? Should i upgrade my firmware?
Thanks
Flash your rom stock with odin
pepmat said:
Flash your rom stock with odin
Click to expand...
Click to collapse
How will i do that? Thanks?
I already have an Odin v1.85 but I dont really know how to do it?
Im new in this ^_^
Download the stock firmware from the site SamMobile, then turn off your phone and press Power + Volume ↓ + Home and vibrates when the phone leaves the power and press volume ↑. Then connect your phone to the PC, open odin, click pda and select the file . md5 of the stock rom you downloaded and click start.
pepmat said:
Download the stock firmware from the site SamMobile, then turn off your phone and press Power + Volume ↓ + Home and vibrates when the phone leaves the power and press volume ↑. Then connect your phone to the PC, open odin, click pda and select the file . md5 of the stock rom you downloaded and click start.
Click to expand...
Click to collapse
What does the procedure do? What was gonna happen if i do it?
I just wanna have knowledge on how its done ^_^. Before I'll try this one. Thanks man!
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
ansh712 said:
Hey guys,
I accidentally flashed the CF-autoroot for 5.0.2 (I forgot there is no root yet for 5.1.1) right after updating to 5.1.1. Now, I'm stuck on the Downloading screen with no access to recovery. When I tried flashing stock recovery(after converting from img to tar.md5) from the Stock tar.md5 it game a NAND Write Start FAIL. I can't flash the stock firmware (G920FXXU1AOCZ) either it gives me the same NAND error.
I have no idea what to do next. Any help will be appreciated. I'll probably head to a customer care center tomorrow if I can't figure this out by then. Please any and all ideas welcome.
Click to expand...
Click to collapse
Download your stock firmware and flash using Odin.
maxal said:
Download your stock firmware and flash using Odin.
Click to expand...
Click to collapse
Doesn't work. It still gives me the same error. NAND Write FAIL.
ansh712 said:
Doesn't work. It still gives me the same error. NAND Write FAIL.
Click to expand...
Click to collapse
Are you using Odin 3.10.6?
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
mattlou said:
I have this same problem, I can only access download mode I CANNOT get into recovery. May I ask where I can download the 5.1.1 software from? I flashed from smart switch but now I am bricked smart switch does not pick up the device. My S6 is the varient mentioned here. Please, please, please someone help with a link. Thank you.
Click to expand...
Click to collapse
Same here looking for the G920FXXU1AOCZ 5.1.1 firmware. Can't find it anywhere.
roydok said:
Exit from Download mode by pressing and hold both volume up and down button + home button + power button for a few seconds. After this you will exit download mode. Once screen turns off press and hold volume down + home button + power button. This will bring you to menu prior to download mode. Restart odin. Connect your device to your PC. Press volume up. Reflash your 5.1.1. Don't make the same mistake twice.
Click to expand...
Click to collapse
There is no 5.1.1 firmware yet for G920FXXU1AOCZ. If you have a link or can upload one I'd be very grateful. Also I can flash any 5.1.1 G920FXXU1AOCZ firmware right?
From what country do come from or where you bought your S6?
---------- Post added at 08:04 AM ---------- Previous post was at 07:55 AM ----------
Based on the CSC (XME) you mentioned on your title you can try flashing this G920F 5.1.1 Malaysian ROM via Odin:
http://www.sammobile.com/firmwares/download/49468/G920FXXU2BOFO_G920FOLB2BOFF_XME/
I am in the UK and I bought it from O2
Here you go UK O2 5.1.1:
http://www.sammobile.com/firmwares/download/49735/G920FXXU2BOFJ_G920FTEF2BOF1_O2U/
I am in India bought it from Malaysia. My phone is XME-G920F. I was just able to flash another 5.1.1 ROM from another Asian region (XEF). Somehow that worked. Sadly now I have to fix region lock since I didnt make a call before leaving Malaysia.
Reflash using the Malaysian 5.1.1 posted above.
roydok said:
Reflash using the Malaysian 5.1.1 posted above.
Click to expand...
Click to collapse
Will that fix sim lock ?
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Sounds like you have a fake Chinese phone.
maxal said:
Sounds like you have a fake Chinese phone.
Click to expand...
Click to collapse
Yup, I do ha, downloaded phone info and checked.
ansh712 said:
Will that fix sim lock ?
Click to expand...
Click to collapse
One way to find out. Flash the Malaysian ROM.
---------- Post added at 10:28 AM ---------- Previous post was at 10:26 AM ----------
djhixson88 said:
Hi, I just recently got a UK S6. (SM-G920F) I'm not sure where to really begin other than when I go to try to enter download mode it goes to a screen that appears like the stock android recovery only everything is in Chinese I believe. (Yes I'm holding volume down, home button, and power button) But no download screen comes up. And I'm pretty sure its running a custom rom because of the boot animation when it powers up (says datuyo) and there's no option to download an ota update. All I'm trying to do is go back to fully stock (I'm in America on AT&T). Build number is KTU84P.G920FZCU1ANIF if that helps. Also below it it says "Custom build version" which is I9296.MHD.C.B-V3.0_0508. I"m not sure what this means, but that's my situation, ANY help would be appreciated.
Click to expand...
Click to collapse
Yup, might be a not so geniune S6...
roydok said:
One way to find out. Flash the Malaysian ROM.
Click to expand...
Click to collapse
I did flash the malaysian rom. Didn't fix it.
I'm all sorted now thank you. Just getting an annoying security notice every 5 minutes which is annoying.
Sent from my SM-G920F using Tapatalk
Something went wrong with my 930T when I tried to flash the deodexed rom and root. Now the phone is stuck on an all-black screen and is only recognized by my computer as Qualcomm HS-USB QDLoader. Is there a straight-forward (or non-straightforward) way to get the phone into download mode or to manually restore it.
rp3 said:
Something went wrong with my 930T when I tried to flash the deodexed rom and root. Now the phone is stuck on an all-black screen and is only recognized by my computer as Qualcomm HS-USB QDLoader. Is there a straight-forward (or non-straightforward) way to get the phone into download mode or to manually restore it.
Click to expand...
Click to collapse
Did the problem occur after the flash of the rom or after rooting?
And have you tried putting it in recovery mode or download mode already?
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
KillerClaw321 said:
Did the problem occur after the flash of the rom or after rooting?
And have you tried putting it in recovery mode or download mode already?
Click to expand...
Click to collapse
Maybe this will help. Seems like a good direction to start in
http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Possible Fix
rp3 said:
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
Click to expand...
Click to collapse
*Also Before you try this turn it off and let it charge for an hour or so...*
So in that case I'd attempt the same key presses to put it in download mode even if nothing is displayed...
1. Volume Down + Power + Home to put it in download mode
2. Then press Volume Up to continue past the warning screen even if nothing is displayed.
3. Grab The Latest Version of Odin here
4. Then Download The Stock Firmware, in this case you will need whichever version you have (if you do not remember you can just download the latest available firmware) Download Firmware and then extract it. (If you have 5 different files in the zip go to step 8)
5. Then install Samsung device drivers(if not already).
6. Start Odin, Plug in the S7, Load in the tar.md5 in the AP/PDA and uncheck Auto Reboot and Repartition.
7. Let the phone restart... VIOLA!!!
8. Alternatively if the zip has 5 files... They should all start with the corresponding buttons in Odin For Example:
AP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
After they are entered into Odin you hit start and after a few minutes ... It should be fixed....
Let me know if you have any further questions or issues...
---------- Post added at 01:22 AM ---------- Previous post was at 01:18 AM ----------
rp3 said:
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
Click to expand...
Click to collapse
Oh actually this might work: http://www.androidbrick.com/unbrick-all-qualcomm-snapdragons-from-qualcomm-hs-usb-qdloader-9008-if-you-have-the-right-kind-of-rom-qhsusb_dload/
Thanks for the ideas. I tried the reboot to no avail. Luckily, T-mobile customer support is very good and they are sending me a new phone for a Wednesday pickup.
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
mlrinoc said:
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Click to expand...
Click to collapse
Already tried that, like i said.. after downloading firmware it doesn't recognize my phone.
force70 said:
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
i have the SM-G955F
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
This - you probably have the newer AQG5 bootloader, which TWRP doesn't support yet.
So follow the instructions above, flash back to the previous bootloader, the you'll be able to flash TWRP ok.
Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
I had the same issue once before. What the fail device info. I think I fixed it by using the most recent update (I think). And messing around with csc files. All this was done half assed in desperation. Then went back to the unlocked firmware and stopped messing with it. Yes Smart switch didn't do crap. Use updato.com to obtain your firmwares
Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
Just got home and tried this! and OMG dude this actually worked! thanks!!! damn im glad my phone works again! thanks thanks thanks!! cant say it enough!!
My guide to fix the issue
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-flash-fail-fixed-solutions-t3650073
Hi, a friend of me has a Samsumg Galaxy S6 (SM-G920F), which runs continuously in a bootloop while installing a system update. It goes to 29% and then restarts himself to start installing the system update again and returns to exactly 29% again, followowd by a restart again, and again, and again ........ Attempts to start-up in recovery mode (Power, Volume +, Home) or download mode (Power, Volume -, Home) do not work. Also my PC does not recognize the phone. :crying::crying:
Does anyone have got an idea to got my phone working, or any other idea to get my phone in recovery- or download-mode?
Anyone?
The Phone boot ?
zworx said:
The Phone boot ?
Click to expand...
Click to collapse
No, unfortunately not. It keeps restarting when system update is at 29% and after the restart keeps comming back in "installing a system update" ......
Try the Pit files ans flash firware via odin
zworx said:
Try the Pit files ans flash firware via odin
Click to expand...
Click to collapse
For that I have to boot to download-mode, right? Problem is that the phone isn't booting to download-mode, recovery or sytem at all. At least not by the "normal" procedure. It constantly booting to "installing systemupdate" ......:crying:
When you connect To odin. The Phone is recognized?
You are not holding volume down+power+home long enough. Keep holding it until you get to the download mode prompt screen.
zworx said:
When you connect To odin. The Phone is recognized?
Click to expand...
Click to collapse
No, the phone is not recognized by ODIN. Drivers on PC are oke, because my S7 edge and my girlfriends S5 are recognized by ODIN ......
benjamen50 said:
You are not holding volume down+power+home long enough. Keep holding it until you get to the download mode prompt screen.
Click to expand...
Click to collapse
I'm holding these buttons for more then 60 seconds ....... but nothing seems to be working .....
Were the volume down, home and power button functioning fine before hand?
Looks like one of the buttons don't work.
benjamen50 said:
Were the volume down, home and power button functioning fine before hand?
Looks like one of the buttons don't work.
Click to expand...
Click to collapse
As far as I know, buttons worked fine before. I guess phone is brikked and not much I can do about it anymore ....... :crying::crying:
I'm guessing you already tried running it flat? There is still a chance download mode is bootable once you get the phone to go off due to flat battery.
This phone is a pretty bad brick, I've fixed up to DRK corrupted but this one seems unrecoverable.
benjamen50 said:
I'm guessing you already tried running it flat? There is still a chance download mode is bootable once you get the phone to go off due to flat battery.
This phone is a pretty bad brick, I've fixed up to DRK corrupted but this one seems unrecoverable.
Click to expand...
Click to collapse
Yes, I already let the phone running empty battery. But as soon as I plug in the powercord, the same process starts over and over again .......
And with adb ?
same trouble
Hi everybody, i had the same trouble on my G-920F (S6), and the only strange way i've find, is to keep button volume up AND down and power, once it's turn off for rebooting, i've add the home button pressed.
finally by that way it show me the recovery menu. Another time it show me the download menu !!??
Well but now my trouble is that i cannot succeed to flash correctly the last official samsung firmware using Odin .
i've tryed to erase nand (i know i should not), but without succeed.
so i'm looking for pit file, and i will try an older firmware.
so try with the volume up and down and power, in case of it works like for me