Related
I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
So I have a friend whose phone I rooted a while back. He's still on the stock ROM and has no plans to change. What do I have to do to get him the 4.3 upgrade when (or if lol) it comes out without locking his phone up? I'm assuming I'll have to remove root. Anyway to do that without using ODIN?
Thanks!
Evil Genius Jr. said:
So I have a friend whose phone I rooted a while back. He's still on the stock ROM and has no plans to change. What do I have to do to get him the 4.3 upgrade when (or if lol) it comes out without locking his phone up? I'm assuming I'll have to remove root. Anyway to do that without using ODIN?
Thanks!
Click to expand...
Click to collapse
If he's still on the stock rom, he'll receive an OTA notification on his phone. So long as he hasn't removed any system apps or installed any systemUI mods then it will update just fine even with a custom recovery installed.
He removed a couple of system apps but is on the stock ROM with no UI changes.
he has time to worry about it later. nothing is going to happen on friday.
does he have a nand of the stock system? if so tell him to restore it before updating to be safe
Yeah that's what I thought but better safe than sorry. No NAND of stock as far as I know.
OK there is thread out there just has rooted stock ROMs you can flash in recovery without a data wipe. I can't seem to find the thread for some reason but I have the file. If you wait till tomorrow I can upload it and share it. Or maybe u can find the thread. Or if all he removed was Verizon apps he could try a flashable zip to restore VZW apps.
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
OK there is thread out there just has rooted stock ROMs you can flash in recovery without a data wipe. I can't seem to find the thread for some reason but I have the file. If you wait till tomorrow I can upload it and share it. Or maybe u can find the thread. Or if all he removed was Verizon apps he could try a flashable zip to restore VZW apps.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
You mean this? This no data wipe one is for Odin.
SlimSnoopOS said:
You mean this? This no data wipe one is for Odin.
Click to expand...
Click to collapse
That's the one! Thanks SlimSnoop. Forgot they were Odin flashables but his friend could use mobile Odin as long as he has an unlocked bootloader. If not just use EZunlock 1.2. Its a one click app.
Sent from my SCH-I535 using Tapatalk
Okay thanks! I do have the zip somewhere, I'll have to look. Bootloader is unlocked with custom recovery. So If I just Odin or flash the zip the custom recovery or bootloader won't cause any problems?
Evil Genius Jr. said:
Okay thanks! I do have the zip somewhere, I'll have to look. Bootloader is unlocked with custom recovery. So If I just Odin or flash the zip the custom recovery or bootloader won't cause any problems?
Click to expand...
Click to collapse
No bootloader is fine but that file needs to flashed in Odin. If you want use mobile Odin. Its what use and it's easier IMO. just make sure which ever version of Odin you use that you have plenty if charge ( over 70%)
Sent from my SCH-I535 using Tapatalk
okay thanks!
And by flashing the zip I meant the flash able zip file, not the Odin file...
Evil Genius Jr. said:
okay thanks!
And by flashing the zip I meant the flash able zip file, not the Odin file...
Click to expand...
Click to collapse
OK. Because you do NOT want to get that term mixed up and you do not want to flash a flushable zip using odim. Very bad idea. Odin uses tar files which sometimes comes zipped up (not flashable via recovery)
Sent from My Nexus 7 running KitKat
Hello my apologies if this has been asked,
I have an AT&T Samsung Galaxy S4 4.4.4 with NJ4 firmware.
To root I flashed the I337_NC1_Stock_Kernel using Odin's PDA slot, rooted using Towelroot, then flashed back to I337_NJ4_Stock_Kernel using Odin's PDA slot.
I downloaded Graviton rom, GalaxyS4/SGH-i337/roms/Graviton/Graviton_S4_v3.0_20140502_SafeStrap.zip
I used Safestrap to boot into recovery mode and made a back up of the stock rom on my ext_sd.
I did a wipe and then flashed Graviton and now when I boot up it appears that rom loads but I get this message stuck on the screen:
"Unfortunately, com.sec.android.sviewcover has stopped."
I tried rewiping and reloading the rom and still get the same problem. I tried restoring using my backup however, when I go to restore I can't see my back up on my sd. However, I checked with my computer and it is there.
What is my best course of action?
Try wiping the data and cache of the mentioned process in the settings. If this doesn't solve then it could be a rom bug
eb6 said:
Try wiping the data and cache of the mentioned process in the settings. If this doesn't solve then it could be a rom bug
Click to expand...
Click to collapse
thanks, it still did not work . I will assume it is a rom bug. I did manage to get my restore to work.
I noticed that my stock was 4.4.4 and graviton is based on 4.4.2. Does this matter?
Just to update. My apologies I don't know how I missed this but I needed to install the nj4 module as well as supersu.zip from safestrap right after installing the rom.
To any other newbies having same problem read this entire thread carefully.
http://forum.xda-developers.com/showthread.php?t=2616221
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Sprint Galaxy S5 OTA update OD3 with "Factory Reset Protection" locks bootloader?
Sprint is pushing out an OTA update with build G900PVPU2BOD3 to the Galaxy S5 and the update changelog reads "Factory Reset Protection", does it locks bootloader?
via: http://www.theandroidsoul.com/sprin...y-reset-protection-build-g900pvpu2bod3-77666/
itskapil said:
Sprint is pushing out an OTA update with build G900PVPU2BOD3 to the Galaxy S5 and the update changelog reads "Factory Reset Protection", does it locks bootloader?
via: http://www.theandroidsoul.com/sprin...y-reset-protection-build-g900pvpu2bod3-77666/
Click to expand...
Click to collapse
The reports of the locked bootloader on T-Mo S6 Edge were mistaken and premature. So the answer is no.
New update has locked me out of root access
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
rivera686 said:
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
Click to expand...
Click to collapse
Odin back to OA6
Sent from my SM-G900P using Tapatalk
Glad I decided not to take the OTA update, even though I'm sure there will be a fix for the loss of root.
A colleague of mine who updated her GS5 yesterday said her caller ID only shows the phone number and no longer shows the contact's name. Also, I can confirm this isn't the 5.1 update . . .
rivera686 said:
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
Click to expand...
Click to collapse
I was able to root OD3 using the most recent CF autoroot for the S5. It will flash OA6 recovery though. Hopefully it will be updated to include the OD3 recovery, or I'll just wait until the OD3 tar is up on sammobile.com to grab the OD3 recovery from there.
elwood said:
Odin back to OA6
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I've accepted the update and have tried to Odin back to OA6. Odin fails. I'm guessing we can't go back.
nyfl2004 said:
I've accepted the update and have tried to Odin back to OA6. Odin fails. I'm guessing we can't go back.
Click to expand...
Click to collapse
I did the same thing. Apparently there's no going back from OD3. If you're worried about root, just use the latest CF Auto Root for this phone. It works on OD3. Then just wait for the full ROM to be posted on Sammobile if you want to do flash that later. I'm rooted on OD3 and haven't had any issues at all.
Cooljb said:
I did the same thing. Apparently there's no going back from OD3. If you're worried about root, just use the latest CF Auto Root for this phone. It works on OD3. Then just wait for the full ROM to be posted on Sammobile if you want to do flash that later. I'm rooted on OD3 and haven't had any issues at all.
Click to expand...
Click to collapse
Yeah, it's really no problem. There's no going back, but I just re-rooted with CF Auto Root and restored an OA6 backup and all is well.
Oa6
Cooljb said:
I was able to root OD3 using the most recent CF autoroot for the S5. It will flash OA6 recovery though. Hopefully it will be updated to include the OD3 recovery, or I'll just wait until the OD3 tar is up on sammobile.com to grab the OD3 recovery from there.
Click to expand...
Click to collapse
So if the recovery is OA6, what happens if you then use that recovery? are you back in OA6 and still rooted? I guess it would be best to wait for the OD3 recovery to show up. In the mean time, still no issues?
Does anyone know how i can delete the update notification its very annoying I'm on stock rooted OA6
Sent from my SM-G900P using XDA Free mobile app
sander999 said:
Does anyone know how i can delete the update notification its very annoying I'm on stock rooted OA6
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
When the notification is on your status bar just long press and open App Info and untick the Show Notifications. No more annoying popup saying to update
April was Autism Awareness Month Sent from my SM-G900P using Tapatalk
elwood said:
When the notification is on your status bar just long press and open App Info and untick the Show Notifications. No more annoying popup saying to update
April was Autism Awareness Month Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Already tried that but wont allow me to uncheck so i just flash Moar and all good
Sent from my SM-G900P using XDA Free mobile app
sander999 said:
Already tried that but wont allow me to uncheck so i just flash Moar and all good
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
That's weird I've never been able to untick a notification. Glad you came abroad to MOAR. Please though we ask you to post your questions in the MOAR Q&A FAQ thread and not the development thread. We as a community are trying to keep the clutter in that thread to a minimal. Heck we even have an Off Topic thread for anything, just so we don't clutter the development thread.
May is Mental Health Awareness Month Sent from my SM-G900P using Tapatalk
I tried that now i cannot flash OA6 thru odin and i just keep getting fail message. I AM STUCK I HATE THIS UPDATE.
Sent from my SM-G900P using XDA Free mobile app
od3 fail
Well i was gonna ask if the od3 build update was the reason i can not flash in odin everything fails when i try to flash twrp or flash 0a6 firware or anything for that matter witch puts me into screen" firware encountered an issue" only way i get out of that is flash the cf auto root .tar or the oa6 modem witch then resets device and loads back into phone and atleast lets me use phone hopefullly thers a fix for this soon really need my custom roms back and my hotspot for work. :crying:
Teroy804 said:
Well i was gonna ask if the od3 build update was the reason i can not flash in odin everything fails when i try to flash twrp or flash 0a6 firware or anything for that matter witch puts me into screen" firware encountered an issue" only way i get out of that is flash the cf auto root .tar or the oa6 modem witch then resets device and loads back into phone and atleast lets me use phone hopefullly thers a fix for this soon really need my custom roms back and my hotspot for work. :crying:
Click to expand...
Click to collapse
I was able to flash the stock OA6 Kernel then Philz recovery through odin, and install rom from there. MOAR works without any issues. CM12.1 runs as good as it ever will, also.
morenoa48 said:
I was able to flash the stock OA6 Kernel then Philz recovery through odin, and install rom from there. MOAR works without any issues. CM12.1 runs as good as it ever will, also.
Click to expand...
Click to collapse
i can install custom roms OA6 with OD3 bootloader ?? or i need stock rom OD3
ENSENADAS said:
i can install custom roms OA6 with OD3 bootloader ?? or i need stock rom OD3
Click to expand...
Click to collapse
I'm on OD3 bootloader and I'm able to run MOAR, and my OA6 back ups.
The update also adds Lollipop's Screen pinning feature.
Every couple of hours i get this message and then i have to reboot. Does anyone know about this, if so how do i fix this? Thanks ahead.
It lools like a malware. Try factory reset.
Sent from my GT-I9500 using Tapatalk
Reboot
Are you rooted or stock. If stock it may have something to do with the latest OTA OJ6. If rooted, I think what the 2nd post could be right, reset is you best option. Just make sure u backup your data on the internal memory. As it be erased with a hard reset.
timberwolf671 said:
Are you rooted or stock. If stock it may have something to do with the latest OTA OJ6. If rooted, I think what the 2nd post could be right, reset is you best option. Just make sure u backup your data on the internal memory. As it be erased with a hard reset.
Click to expand...
Click to collapse
I am rooted. Using stock rom with beadt mode kerenl. Odex rom, I'm using xposed and GT tools. So could it be the xposed I'm using?