I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Related
Well, I attempted to use SGS kernel flasher to install the infuseGB kernel. Now I'm stuck with a bootloop and I need help fixing it.
Anyways, Odin confuses the crap out of me. I put my phone in download mode but all odin does is light up a box with com3 in it. I've reinstalled drivers but I'm not sure what to do next.
All help is appreciated.
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
prairied0gg said:
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Click to expand...
Click to collapse
I'll try that if I can:
A: figure out how to use odin properly
B: find the stock AT&T kernel
This has turned into one big mess.
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
skatin707 said:
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
Click to expand...
Click to collapse
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
bignate78 said:
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
skatin707 said:
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
download the attatched kernel zip
Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
Download chosen rom zip and place it on your internal SD card.
Power off your phone.
With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
Select "install zip from sdcard" and select chosen rom zip.
Once that finishes, select "wipe data/factory reset".
Select "reboot system now".
once rebooted sgs flash the any GB kernel you want, remember to read and make sure which ever kernel your choosing is GB or Froyo
I flashed it, and thankfully it didn't bootloop. However, my cwm is still green.
Scratch that, we are in the red now! You are a king among men.
Sent from my EPAD using xda premium
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
wizardofkoz said:
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
Click to expand...
Click to collapse
Mine was kernel issues.
Sent from my SGH-I997 using xda premium
Thanks to spjetrovic we have the update.zip for the GB update for your use now
http://www.multiupload.com/HAG3RFTBY6
1. Follow imnuts instructions for preparing for OTA found here http://rootzwiki.com/topic/10202-how-to-prepare-for-the-gb-ota/
2. place file on root of SD card and rename to update.zip
3. boot to stock recovery and select apply update.zip from sd card
It takes a while to complete, so be patient. Make sure you have plenty of battery.
ps. No one is responsible for what you do to your phone except you. This has been tested by at least a dozen people in IRC and works flawlessly when you follow the directions.
pss. this build is 4 days newer than "EP4P" regardless of what the numbering scheme may be.
This belongs in the dev section, also what is included? ROM, KERNEL, RADIO?
Sent from my SCH-I510 using XDA App
Very cool! Downloading
edit: guessing the keyword here is "STOCK RECOVERY"
Almost 4got, thanks!
Sent from my SCH-I510 using XDA App
GOS,
It is the OTA update that will roll out later next week. It contains all the changes from EE4 to EP4 rom/kernel/recovery/ect.. It is just changes, by no way a stand-alone flash.
And I didn't post in Development, because I didn't develop it. It can be moved if the mods think it belongs there.
Did any of you successfully rooted this?
Just in case no one completely reads the post by Imnuts because I know most people don't.....
You HAVE to flash imoseyon's kernel or you recovery will NOT stick!
fortesquieu said:
Did any of you successfully rooted this?
Click to expand...
Click to collapse
Sure, just flash CWM then Imoseyon's kernel and you are rooted
spc_hicks09 said:
Just in case no one completely reads the post by Imnuts because I know most people don't.....
You HAVE to flash imoseyon's kernel or you recovery will NOT stick!
Click to expand...
Click to collapse
How do you flash Imo's kernel if my recovery doesn't stick, and can't get into recovery?
fortesquieu said:
How do you flash Imo's kernel if my recovery doesn't stick, and can't get into recovery?
Click to expand...
Click to collapse
you can't let the phone boot after you flash CWM. unselect auto-reboot and then boot straight to recovery after flash
Here are my instructions for getting all this to work:
BEFORE YOU ODIN BACK TO EE4, MAKE SURE YOU HAVE THE SU FLASHABLE ZIP, THE OTA UPDATE AND IMOSEYON'S KERNEL ON YOUR SDCARD!
Make sure the update file is renamed to "update" and that it's on the root of your sdcard. (not in any folders or anything)
Odin back to EE4. Reboot normally.
Turn the phone off, then reboot into Stock Recovery and run the update.
Once the update finishes and the phone boots regularly. Reboot into Download Mode and plug the phone into the computer.
Start Odin, Uncheck "Auto Reboot", select PDA, NOT PHONE!
Click on the PDA tab and find your recovery file then click "start."
Once it is done and you see the word "PASS" on Odin, unplug the usb cable and press down all three buttons to boot into recovery (volume up, home, power)
Once in recovery, wipe cache, wipe dalvik, mount /system and flash the SU flashable zip.
Go back and wipe cache and dalvik again, mount /system again and flash the kernel.
After that, your recovery will stick and you're good to go. You are now rooted and running on EP4D.
Sorry for the dumb question but after searching, I can't find the answer; how do I access the stock recovery?
billygoat555 said:
Sorry for the dumb question but after searching, I can't find the answer; how do I access the stock recovery?
Click to expand...
Click to collapse
Vol.up+ home+ power
release power when you see the samsung logo. release the other two a few seconds after
Nevermind lol
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
WildH said:
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Yes sir. ... ...
WildH said:
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
You will only get this OTA or be able to use this update if you are on stock, unrooted EE4. You can't get there from any other point.
You can also wait a bit (probably less than a week) and someone will publish full Odins of EP4D. I'm personally not leaving EP4P until we have a deodexed version of EP4D and some themes.
Ah hell..that is a pain in the ass. I'll wait to see if they fixed the crackling on incoming calls before I go through the hassel.
Sent from my SCH-I510 using XDA App
I love how fast we hop on these leaks and officials lol
Where do you get the proper "SU flashable zip"?
Sent from my SCH-I510 using xda premium
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Try odin?
I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.
Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5
I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...
I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?
frogcity said:
I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?
Click to expand...
Click to collapse
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium
daothanhduy1996 said:
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I was on ICS (Cyanogenmod9) when I tried to flash it.
frogcity said:
I was on ICS (Cyanogenmod9) when I tried to flash it.
Click to expand...
Click to collapse
Oh so sr, my mistake (inform more info next time bro ^^) so, just try to redownload or recopy and reflash cause I flashed it normally from CM9
Sent from my SGH-T959V using xda premium
sounds like he lost root. You will probably need to use heimdall one click to get back to kj6. Use the one I packaged that can be found here.
http://forum.xda-developers.com/showthread.php?t=1822626
Then flash to ICS and then to the rom you want.
I had this happen to me when I tried to flash CNA b4. No matter what I did I could not get out of recovery when trying to flash. I thought for sure I would have to go back to stock but I just fully wiped and reinstalled AOKP with no problems. It may have been a bad download or something but I had that issue as well.
My phone has been soft bricked after trying to flash the latest dkp kernel. I was using philz touch recovery and I tried to flash dkp kernel 3-20 build, and I got an error during flashing saying that it couldn't decompress the ramdisk. So I tried to flash the older version of dkp that I was using, and it failed to flash! I have never had problems like this before. So now my phone will not boot to system or go back to recovery. I can only access download mode. I was using CM11 with the ML1 modem and dkp kernel before my phone got bricked. It really frustrates me that my phone just randomly decided to freak out and brick itself, because I've been doing the same thing forever and never had any problems flashing a kernel. Please tell me how I can fix my phone. Thank you.
jonny30bass said:
My phone has been soft bricked after trying to flash the latest dkp kernel. I was using philz touch recovery and I tried to flash dkp kernel 3-20 build, and I got an error during flashing saying that it couldn't decompress the ramdisk. So I tried to flash the older version of dkp that I was using, and it failed to flash! I have never had problems like this before. So now my phone will not boot to system or go back to recovery. I can only access download mode. I was using CM11 with the ML1 modem and dkp kernel before my phone got bricked. It really frustrates me that my phone just randomly decided to freak out and brick itself, because I've been doing the same thing forever and never had any problems flashing a kernel. Please tell me how I can fix my phone. Thank you.
Click to expand...
Click to collapse
This how i did back to stock.
http://forum.xda-developers.com/showthread.php?t=1867253
Will help u on soft brick.
Odin enter download mode flash stock image. After that's all done. Dnt let ur fone install the ota. And root using CASUAL root and ur back to business
Sent from my SCH-I535 using Tapatalk
twistedillutions said:
This how i did back to stock.
http://forum.xda-developers.com/showthread.php?t=1867253
Will help u on soft brick.
Odin enter download mode flash stock image. After that's all done. Dnt let ur fone install the ota. And root using CASUAL root and ur back to business
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I did an ODIN back to stock MF1. In ODIN it says "Pass!" above the com port, and it also says <OSM> All threads completed. (succeed 1 / failed 0). However, my phone has been stuck on the 4G LTE screen with the colorful rings for around 15 minutes and it doesn't seem to be doing anything. What should I do?
Pull battery out and reboot.. Thats mentioned on instructions.
Post wat odin tells u
Sent from my SCH-I535 using Tapatalk
twistedillutions said:
Pull battery out and reboot.. Thats mentioned on instructions.
Post wat odin tells u
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Well when I pulled the battery and tried to reboot a samsung logo with an unlocked symbol was underneath it and it still gets stuck on the 4g LTE screen. Also, it won't allow me to enter the recovery.
So I went back to download mode on my screen and i noticed that it still says "System Status: Custom"
jonny30bass said:
Well when I pulled the battery and tried to reboot a samsung logo with an unlocked symbol was underneath it and it still gets stuck on the 4g LTE screen. Also, it won't allow me to enter the recovery.
Click to expand...
Click to collapse
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Like I said, it won't go into recovery mode. It seems like it is going to and then it just has a black screen.
BadUsername said:
Boot into recovery, factory reset, then reboot.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
You have to be able to boot into recovery, make sure you hold the volume up + home for an extended period of time.
If you can't, you need to Odin the stock rom and try again.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
You have to be able to boot into recovery, make sure you hold the volume up + home for an extended period of time.
If you can't, you need to Odin the stock rom and try again.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
The ODIN to stock did not work correctly. Maybe I need a different MF1 tar file. Can someone point me to a link for it? I have searched an can't find a completely stock MF1 file.
jonny30bass said:
The ODIN to stock did not work correctly. Maybe I need a different MF1 tar file. Can someone point me to a link for it? I have searched an can't find a completely stock MF1 file.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23134718111254196
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
http://www.androidfilehost.com/?fid=23134718111254196
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That's the exact one that I just used. It didn't seem to restore to stock with that.
jonny30bass said:
That's the exact one that I just used. It didn't seem to restore to stock with that.
Click to expand...
Click to collapse
Don't know what else to tell you, it's a completely stock file.
Recovery, system, kernel, and bootloader.
If you can't boot into recovery it must've not flashed perfectly or something else is wrong, like your hardware.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Don't know what else to tell you, it's a completely stock file.
Recovery, system, kernel, and bootloader.
If you can't boot into recovery it must've not flashed perfectly or something else is wrong, like your hardware.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I highly doubt that it is a hardware issue. I just tried to ODIN again and I'm in the same situation. One thing that I have noticed is that it tries to reinstall the MTP driver after using ODIN and it fails to install.
EDIT: Nevermind. I was able to enter recovery this time. I just did a factory reset. Hopefully it boots now. I will report back with results.
UPDATE: Ok. Everything seems fine now. Used casual to root and unlock bootloader again. Then installed PhilZ Touch Recovery. Now I am making a backup, and I am going to flash a Kit Kat Rom.