Database Info

[Q] rooting questions, device drivers etc..

so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...

bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot

do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium

what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM

thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium

and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge

thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge

one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.

bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge

sweet thanks
Sent from my SCH-I510 using xda premium

last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium

bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge

New ROM

Whenever i try to flash a new ROM it doesn't want to load. I've tried the CM7 nightlies and the pheonix ROM. This is what I do.
I root my phone via one click root.
Install clockwork recovery via app.
wipe
install ROM via recovery (install zip)
start up
Locks at LG screen. Ugh!
Any advice?

Turague said:
Whenever i try to flash a new ROM it doesn't want to load. I've tried the CM7 nightlies and the pheonix ROM. This is what I do.
I root my phone via one click root.
Install clockwork recovery via app.
wipe
install ROM via recovery (install zip)
start up
Locks at LG screen. Ugh!
Any advice?
Click to expand...
Click to collapse
What OS are you coming from?

Wipe cache
Wipe dalvik cache
Wipe data
Wipe system
Flash.
NVIDIA NEVER AGAIN!

Turague said:
Install clockwork recovery via app.
Click to expand...
Click to collapse
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
Why? What happens if you did from the ROM Manager? Sorry im a noob to this device
Sent from my LG-P999 using XDA App

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
This is a must for the g2x. If you use from manager it only fake flashes clockwork mod recovery and makes you unable to flash roms.
Typical way to achieve root on the g2x is to.
1. Nvflash cwm
2. Create a nandroid backup.
3. Flash a rom that has root.
Don't bother with rom manager or super one click.
Sent from my Galaxy Nexus using xda premium

Just as a quick question. Does wiping the system, wipe ANY of my data? Like does it only wipe the existing ROM? Ive been confused of it since the first time i flashed a ROM
Sent from my G2X

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
Thanks, I'll give it a shot and get back to you. I don't think it had to do with the wipe as I always ran a wipe script before installing. I thought it had to do with the kernel.... (don't have a clue though)
I'll flash the clockwork via nvflash, and get back to you, thanks.
EDIT:
IT WORKS. NVFlash the recovery, make sure to change the command if you have a different version you plan to flash/

I used rom manager and all, my roms have worked fine... :S
Sent from my LG-P999 using XDA App

theNOOBuser said:
I used rom manager and all, my roms have worked fine... :S
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
You sir are a very lucky man.

Lol. I'm guessing it was a noob-move getting clockwork through ROM Manager. Ill probably use nvflash when I get home just to be safe hahaha
Sent from my LG-P999 using XDA App

theNOOBuser said:
Lol. I'm guessing it was a noob-move getting clockwork through ROM Manager. Ill probably use nvflash when I get home just to be safe hahaha
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
you definitely want to do that. do you have a nandoid backup of your original system? if your phone breaks, that is the only way to revert it back to original for an exchange (unless ofcourse you take a hammer to it).

Yeah. I have a Stock froyo backup.
Sent from my LG-P999 using XDA App

jblah said:
you definitely want to do that. do you have a nandoid backup of your original system? if your phone breaks, that is the only way to revert it back to original for an exchange (unless ofcourse you take a hammer to it).
Click to expand...
Click to collapse
i first flased cwm using nvflas... but then i updated it thru rom manager ... is it ok?

rohitmohanihm said:
i first flased cwm using nvflas... but then i updated it thru rom manager ... is it ok?
Click to expand...
Click to collapse
I think so. Catch is that I don't know if doing that will actually update anything, the whole problem is that ROM manager doesn't flash it properly/to the right place. The only thing to do is make a nandroid and try it out and if ti doesn't work, then reflash with NV flash and you're good.

Волк said:
I think so. Catch is that I don't know if doing that will actually update anything, the whole problem is that ROM manager doesn't flash it properly/to the right place. The only thing to do is make a nandroid and try it out and if ti doesn't work, then reflash with NV flash and you're good.
Click to expand...
Click to collapse
I flashed a few other ROMs after i updated CWM thru ROM manager.. and all of them flashed with out any problems.. the only Issue i had was when i tried flashing Morfic's Trinity kernal .. my phone would get stuck at the boot animation.. i wiped every thing and reflashed CyanogenMod and my phone is working agin [I wiped cache and Dalviks before i flashed the kernal.. i guess my phone cant handle it] http://media.xda-developers.com/images/smilies/mad.gif .. Thanks Bro

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Soft-Bricking Phone Each Time I Flash

AT&T replaced my Infuse (which I was running JB and before that ICS), so I have a brand new phone.
Came stock with G 2.3.6.
I was able to flash jscott30 2.3.6 Gingerbread with root and CWM recovery option - link below. I chose option C. Phone is running great.
http://forum.xda-developers.com/showthread.php?t=1613523
However, when I try to upgrade to a custom ICS or JB rom (doesn't matter which one) from CWM, the phone soft-bricks - meaning when it resets it's either stuck in Samsung boot loop or that crashed recovery loop.
I have to reflash in download mode to the link above, which thankfully works!
Bottom line - I can't flash any ICS or JB and can't figure out what the deal is. I had no problems flashing before with my old Infuse.
I'm clearly doing something wrong - any ideas? I know I'm not providing a lot of info, but I'm following each flash instruction to the letter (in each OP).
Thanks for any insight!
I don't want to wait for Samsung to upgrade to ICS - if they ever do.

I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R

jester12345 said:
I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yeah, I do pull battery.
Where can I find the entropy cm9? Thanks!

Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R

jester12345 said:
Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yes, I've tried many different ROMs. Each fails. So weird.

Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium

psal217050 said:
Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Red 2.5.1.3
Should I flash the blue? Thanks.

delfinparis said:
Red 2.5.1.3
Should I flash the blue? Thanks.
Click to expand...
Click to collapse
Yes.

psal217050 said:
Yes.
Click to expand...
Click to collapse
There shouldn't be any need to manually install CWM, as the ROM zips have the udated CWM built into them. Since you're coming from GB, the first reboot after installing ICS or JB, should boot you into the new BLUE CWM, after which you may need to format System, and flash again. Also, have you removed your External SD card before flashing? That's caused problems for some people.

My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium

Yep - did the Heimdall and it pushed me to blue CWM. I'm good now!
Just flashed ParanoidAndroid ICS and it's working.
thanks!

psal217050 said:
My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Odd. Never ran into that issue yet, and, as such, didn't notice that there was a Heimdall ICS one-click kernel floating about. Great advice.

[Q] after cm7 installation g2x

hey i rooted my lg g2x and installed cm7 after some error
while i was turning it on first time after install it bricked and i had to use nvflash to fix it
after that it looked like my phone updated to cm7(not sure) and it says 2.3.3 in phone software
i want to update to the jellybean cm 10 but it says my phone isnt rooted anymore, happened after i nvflashed it
want to know if this is normal and if not how do i reroot it

The nvflash put you back to stock download the rom you want boot into recovery wipe cache data flash rom flash gapps .should be good you might need to reflash cwm recovery if you pushed the wrong button in nvflash.
Sent from my SGH-T999 using xda premium

monte666 said:
The nvflash put you back to stock download the rom you want boot into recovery wipe cache data flash rom flash gapps .should be good you might need to reflash cwm recovery if you pushed the wrong button in nvflash.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
i cant, it says error while attempting to run privileged commands in when i try to go into recovery from rom manager

cybertecnus said:
i cant, it says error while attempting to run privileged commands in when i try to go into recovery from rom manager
Click to expand...
Click to collapse
nvm, i fixed it by using nv flash, and going into cwm recovery, then installing cm10, but still thanks for your help

cybertecnus said:
nvm, i fixed it by using nv flash, and going into cwm recovery, then installing cm10, but still thanks for your help
Click to expand...
Click to collapse
Rom manager doesn't work on this phone since you nvflash back to stock it cant gain root access hence your error.
Sent from my SGH-T999 using xda premium