so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge
sweet thanks
Sent from my SCH-I510 using xda premium
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge
Related
Ok so im new and I flashed my SGS4G using these directions to a T!
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/show....php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/show....php?t=1123039) (http://forum.xda-developers.com/show....php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/show....php?t=1127069)
init.d (http://forum.xda-developers.com/show...ghlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/show....php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
But after all this I get stuck at the galaxy S screen for more than 5minutes although it will let me back into recovery mode. Its called the "CwM voodoo lagfix recovery v3.0.2.8x" and then gives me a list of options. WHAT SHOULD I DO???
I would ODIN back to KD1 and redo it, but really make sure you have the mounts correct (I know you checked this already, but check it again.) If it still does not work, then I would still go back to KD1 and then try it again by re-downloading all the zip files again. That's what I had to do.
Those were my directions! Was my fault. Ext4 needs a supported kernel. You have one now. Go back into cwm and retry everything starting from wiping the cache and system. sorry about that.
Check your mounts after the ext4 converter just to be safe.
Sent from my SGH-T959V using XDA Premium App
Also, don't worry, we've all soft bricked at one point.
Sent from my SGH-T959V using XDA Premium App
ok i restored my phone back to factory settings last night.. So what do i need to download that i didnt last night so this darn thing works???
Yeah haha well im just gld i was able to fix it without odin. thats sounds like a pain... Any Jager555 i noticed youre running Bali 3.1 UV voodoo I downloaded the bail v3.1 voodoo is that why it didnt work?
jager555 said:
Also, don't worry, we've all soft bricked at one point.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
No, it didn't work cause you were coming off of stock. The ext4 converter needs a compatible kernel...which you didn't have. Now that you have that red cwm, you are running a compatible kernel. So everything should work now. Reflash everything like I started before after you wipe everything. It should work ok. Like I said it was my fault for not mentioning that, not something you did.
Sent from my SGH-T959V using XDA Premium App
If you are no longer on the bali kernel, flash bionix, so you have bali 2.1, and then flash everything according to my directions. Ext4 will only work if you have the compatible kernel.
Sent from my SGH-T959V using XDA Premium App
Ok so I went into recovery mode and it brought me to the red voodoo screen now should i go into mounts and storage and change that stuff again or what should i do first???
jager555 said:
If you are no longer on the bali kernel, flash bionix, so you have bali 2.1, and then flash everything according to my directions. Ext4 will only work if you have the compatible kernel.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
wipe the data and cache. check mounts. flash ext4. check mounts. flash bionix. flash 3.1. go back. reboot system from cwm. wait. let me know how it goes. i'll be online.
Ok i just followed your directions again. But should i flash Bali 3.1 again if i removed it?
archerpro12 said:
Ok so I went into recovery mode and it brought me to the red voodoo screen now should i go into mounts and storage and change that stuff again or what should i do first???
Click to expand...
Click to collapse
once you flash bionx, it replaces the kernel with 2.1, so yes. reflash 3.1
crossing my fingers...hoping it works...
any updates??
my phone is now flashed with bionix frost! thanks a million jager555 team whiskey drhonk and anyone else involved!
jager555 said:
once you flash bionx, it replaces the kernel with 2.1, so yes. reflash 3.1
crossing my fingers...hoping it works...
Click to expand...
Click to collapse
remember to leave it for about 10 minutes (i know its hard to do that)
check out my first post and look into the fugu and init.d tweaks.
glad to help. this community is awesome.
My son bricked his phone last night! I'm not familiar with samsung and odin at all. I have an evo and I'm always installing roms on my phone, so I'm aware of the process. Can someone please explain to me how to fix his device using odin. I have already installed the proper drivers and odin software. I'm not sure of what rom or where to get a stock rom from. I also dont know the process or steps to begin usin odin.
Thanks
http://forum.xda-developers.com/showthread.php?t=1117554
That link will provide you with the answers you need.
Sent from my SGH-T959V using xda premium
from that link, go to the op, find the noobs guide to Odin and follow that. if you want, you can Odin to a different ROM. But I would suggest sticking with a froyo one until you know what you are doing
Sent from my SGH-T959V using xda premium
+1 on froyo...
Sent from my SGH-T959V using XDA App
One you Odin a ROM, Odin Bali 3.3, run ext4 converter and flash bionix frost or icbinb froyo. Or black ice.
Sent from my SGH-T959V using xda premium
I ran odin and used many types of rom and I keep getting a cache fail at the very end.
The repartition checked in Odin?
And kc1?
Sent from my SGH-T959V using XDA App
Use heimdall and don't flash the cache
Sent from my SGH-T959V using XDA App
gears1979 said:
I ran odin and used many types of rom and I keep getting a cache fail at the very end.
Click to expand...
Click to collapse
take out your battery and sim card. then flash KB5 in Odin. make sure your battery is over 15% as well. let me know how it goes. we'll figure it out
Ok odin worked. But now its stuck on the boot image. I can boot into recovery but when I restart my sons phone, it gets stuck at the boot image. Im not sure what I'm doing wrong.
Sent from my PC36100 using XDA App
If your bootlooped Odin didn't work. Download this
http://forum.xda-developers.com/showthread.php?t=1193751
and this
http://forum.xda-developers.com/showthread.php?t=1195878
odin it the first one
you'll boot to cwm
go to voodoo
disable lagfix and system.
factory reset clear cache
reboot.
put the second one on the root of your sd card
reboot recovery
flash audiophile(if your son like music he'll dig it).
Hope that works for you.
EDited to give audiophile some love
jager555 said:
One you Odin a ROM, Odin Bali 3.3, run ext4 converter and flash bionix frost or icbinb froyo. Or black ice.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
or u can flash audiophile roms
or u can flash audiophile roms
Click to expand...
Click to collapse
people still use those. SO last week. He says running audio ftw.
Just trying to point the guy in the get my phone fixed direction. I'll edit the post and make sure he boots to audio!
when they are talking about mounting, what does that mean. I see it in recocery, but when i select it, nothing happens.
Ok, I flashed the rom in recovery and it just sits on the splash screen. It's not boot looping, just sitting on the splash screen.
look up the noobs guide to odin in the bible and follow that. you should be up and running after that.
so i have just about all the files i need 1. ep1w stock debloated.tar.md5 i have this i assume i flash this via pda but i was told i need to flash a kernal with this??? is this true... cause i just want to flash gummycharged 2.0 2. i have a file called recovery_charge.odin.md5.tar is this the correct cwm i have been hearing people having issues with the newest version whitch i had previously and could not fix don't want it to happen again. 3.can i just flash my rom of choce via odin like gummycharged odin version or humble 5.0 ?? plus the most recent cwm won't let me download anyway...
Yea I'd d/l the imeyosen 4 kernel.it is very fast and stable. Also has smartass and interactive x governors, which u have to enable in terminal emulator tho
i am not currently rooted but what do i do?? i flash the stock rom reboot and then flash a kernal via odin?? what about cwm?
ok looks like i already have this on my desktop but there is no way to flash this i do not have cwm yet that is my biggest hurdle i just want gummy charged... and people were having issues with the lastest cmw..
Well I can tell ya what I used when i got my charge. The thread in development I think is called root,kernel, cwm. That got me rooted with voodoo.then I just worked my way up from there. Upgraded my radio to ep3 made a huge difference for signal strength.then to ep4. Then I odin'd humble 4 which came with cwm. I then flashed emoysen 4 in cwm. Then flashed humble 5. I haven't had any problems with the cwm version he included.
But all that jumping around aside. I think you can Odin the radio straight to ep4 and Odin to humble 4 and after that do whatever you want in cwm.
so technically i can just flash the humble 5.0 odin file without being rooted and it will give me root and cwm haven't rooted yet or any rom for that matter i was just wanting to flash one rom and i am good to go such as gummy charge 2.0 odin or humble i don't plan on flashing a whole lot..
Well I can't remember if humble 5 has a kernel. I know it didn't when i d/l it. Unless the post has been updated. That's why i said go humble 4 first .it includes imoysen 3 .1 kernel I believe
And I'll say in my personal experience humble 5 is the most stable with best battery I've ran yet. And I've flashed every single rom there is for the charge. But it varies from phone to phone
so with no root i can just flash humble 4.0 and i am rooted with kernal and i am done??
bfitzpatrickd2d said:
so with no root i can just flash humble 4.0 and i am rooted with kernal and i am done??
Click to expand...
Click to collapse
I may need someone else to chime in cuz i didn't do it this way. But i think Odin with a rooted rom and kernel does it. I'm about 90 percent sure of that . Somebody? Anybody?
Also its worth it to upgrade ur radio to at ep4.
Just remember use the PDA button only in Odin
would like some assurance of a better possibility i guess technically i flash the stock ep1w debloated rom boot up, power off back to odin flash that cwm version you mentioned earlier in the thread do a backup in cwm and then flash via cwm.... correct.. don't mean to make things complicated..
bfitzpatrickd2d said:
would like some assurance of a better possibility i guess technically i flash the stock ep1w debloated rom boot up, power off back to odin flash that cwm version you mentioned earlier in the thread do a backup in cwm and then flash via cwm.... correct.. don't mean to make things complicated..
Click to expand...
Click to collapse
That's it exactly. Also I'd recommend reading the how to at the top of development section called how to fix your phone. And download those files just in case you ever get stuck. It saved me once.
Edit ...actually you could Odin straight to humble 4
---------- Post added at 11:03 AM ---------- Previous post was at 10:52 AM ----------
Just for the read, figured I'd show you how i rooted mine. Read the OP ... http://forum.xda-developers.com/showthread.php?t=1092114
ok i flashed the stock edw1 i think its called super user installed now i want to install gummy but don't have cwm how do i go about flashing gummy 2.0
Should be able to Odin one of these. latest is 8/17 .make sure u Odin a gb radio too. They have better reception and less data drops. http://forum.xda-developers.com/showthread.php?t=1112804
I'd recommend humble. Its been alot more stable than gummy was for me. Tho gummy has a few more settings u can tweak thru tsm parts. Sometimes the juice isn't worth the squeeze
---------- Post added at 11:46 AM ---------- Previous post was at 11:38 AM ----------
I suggest go ahead and flash this radio. Don't touch it while its flashing and put battery back in after its in download mode before you hit start on Odin as extra precaution. Hiccups during radio flashes are bout the only way to actually brick a phone ....or so I've read. http://forum.xda-developers.com/showthread.php?t=1339214
Thanks guys flashed humble 4.0 working so much better than stock... Can't flash 5.0 requires a kernal rather not install cwm for previous precautions just wish I could find the newest gummy charged Odin for 2.0 or 2.1
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
Thanks guys flashed humble 4.0 working so much better than stock... Can't flash 5.0 requires a kernal rather not install cwm for previous precautions just wish I could find the newest gummy charged Odin for 2.0 or 2.1
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Humble came with cwm on it didn't it. D/l quickboot. It a free app, make it easy to boot into recovery. Just wipe cache and dalvic and flash imoseyon 4 then put humble 5 on it. Better to do it now before you get everything see up the way u want it
I don't think gummy 2 comes in Odin format
Don't just say thanks, hit thanks. Its appreciated
I keep forgetting the app has a thanks button now
Sent from my SCH-I510 using xda premium
Love that quickboot app and its on my home page.
How can you tell if cwm is installed other than attempting to boot into recovery
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
How can you tell if cwm is installed other than attempting to boot into recovery
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
I guess installing rom manager free would do it. Open it up, grant su
Then on top line it tells latest cwm version available and current installed version
blueis300 said:
Love that quickboot app and its on my home page.
Click to expand...
Click to collapse
I use quickboot plus. It includes a Hotboot option
Ok just got this phone and have decided to go with Phoenix Blood rom, but how do i start? I have to be on froyo to root? Im coming from samsung epic on sprint that i flashed so im not completely retarded. Thanks for any help
Use superoneclick to root on froyo.
If your on 2.3.3 gb there's a flashable. Zip in development section to root.
Also you will want to use tgagunnmans nvflash method to install clockworkmod recovery in dev section.
Phoenix blood is a great choice btw, enjoy!
Sent from my LG-P999 using xda premium
You're still on Froyo? To my understanding it's a good idea to flash the OTA GB first so that you'll get the up to date baseband. Once that's done just go ahead and flash PB.
no im on gb jsut thought i had to go back to froyo to root, so i just flash clockwork mod then pb and thats it?
reeshmd23 said:
no im on gb jsut thought i had to go back to froyo to root, so i just flash clockwork mod then pb and thats it?
Click to expand...
Click to collapse
Yes, but make sure you're using NVFlash to get CWM. Don't use Rom Manager.
Easiest way is using the tool unlockroot. It supports gb on the G2X. Or you can use nvflash, whichever you prefer.
Sent from my LG-P999 using XDA App
redmonke255 said:
Easiest way is using the tool unlockroot. It supports gb on the G2X. Or you can use nvflash, whichever you prefer.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
If he wants to change Roms he will still need Nvflash regardless how he gets it rooted.
GTWalling said:
If he wants to change Roms he will still need Nvflash regardless how he gets it rooted.
Click to expand...
Click to collapse
Agree. Nvflash=bullet proof.
what is nvflash?
reeshmd23 said:
what is nvflash?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1056847
From that thread:
Flashing the custom recovery using NvFlash is the only way to ensure that in the case your phone will not boot up, you will be able to get into recovery to fix the issue / flash a ROM / restore from nandroid backup. That is what this app will do for you.
If you flashed the ClockworkMod recovery from ROM Manager it does not flash the recovery to your phone, it fake flashed it. The only way you can gain access to ClockworkMod recovery is through ROM Manager at that point. Using this method is the only way to flash recovery so it is persistent and accessible booting to recovery.
If you have already flashed through ROM Manager you can still proceed with this method. Flash Away!
(You can use both ROM Manager CWM and have the nvflashed version working together. You just access either or one at a time, having the nvflashed one means you can boot to CWM. Welcome to Tegra2)
Click to expand...
Click to collapse
Follow the link. This is a must for tegra 2 based phones. It is always better to be safe than sorry and it also allows you to do a ton of other things, such as making backups and flashing roms. Let us know if you need help. The phone is pretty much unbrickable after you do this. It gives you the ability to recover from any major mistake.
Its in the dev thread, it low level flashes clockworkmod recovery to our phones internal memory partition. You need to install apx drivers first in order for the g2x to be nvflashed.
Sent from my LG-P999 using xda premium
thanks for the help guys got it all set up
Just to add in, nvflash allows u to boot into cwm recovery whenever u want and u don't need to be next to a computer. I think that is how it worked for Samsung phones and Odin, where u needed a computer, but haven't used a Samsung phone so I could be wrong. Remember always make a back up of everything and play around with the different roms, not every rom works for everyone
Sent from my LG-P999 using xda premium
Actually Odin is just like nvflash. It is used to put cwm on you phone and to put the stock recovery back on.
Once you have cwm you can flash what ever rom or kernel without the need for root. Just back up your stock unrooted stock rom before flashing anything else.
If you do that you will have your own stock backup with no need of finding it in the forums if you need to go back to stock.
Sent from my LG-P999 using xda premium
I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?
frogcity said:
I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?
Click to expand...
Click to collapse
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium
daothanhduy1996 said:
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I was on ICS (Cyanogenmod9) when I tried to flash it.
frogcity said:
I was on ICS (Cyanogenmod9) when I tried to flash it.
Click to expand...
Click to collapse
Oh so sr, my mistake (inform more info next time bro ^^) so, just try to redownload or recopy and reflash cause I flashed it normally from CM9
Sent from my SGH-T959V using xda premium
sounds like he lost root. You will probably need to use heimdall one click to get back to kj6. Use the one I packaged that can be found here.
http://forum.xda-developers.com/showthread.php?t=1822626
Then flash to ICS and then to the rom you want.
I had this happen to me when I tried to flash CNA b4. No matter what I did I could not get out of recovery when trying to flash. I thought for sure I would have to go back to stock but I just fully wiped and reinstalled AOKP with no problems. It may have been a bad download or something but I had that issue as well.