Database Info

[Q] How to get Red CWM

I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks

joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
When in cwm, choose to install zip from SD card and go all the way to bottom and select "update.zip" and if it doesn't reboot, select reboot now and it should boot into Red CWM. That might do it i think
Froggys go ribbet

joho5 said:
I was running Infused 2.2.3 for the longest time and when I always went into recovery it was red.
Well, I was switching roms and got a hiccup in the install and had to revert back to stock using odin and gtg unbrick.
Once I was back to stock froyo, I rooted, replaced the recovery.bin file with the no sig file and then went into rom manager and got cwm, rebooted, reinstalled packages, etc...
Well I have cwm, but when I get into it, its green lettering...not red.
Only reason I ask is because just about everywhere I see, they say get into red.
Any ideas on how I can get red installed?
thanks
Click to expand...
Click to collapse
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium

Kevinr678 said:
Flash Entropy's daily driver kernel. You'll get red CWM and voodoo lagfix. Great kernel by the way.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.

joho5 said:
thanks, I will prob have a rom with a stock kernel...if thats the case, can I flash entropys kernel (which is my choice one on custom roms) through odin in the pda slot?
thanks for the help.
I will only want to flash a custom kernel to get root, then back to stock because the rom I will be running is based on one of the newer leaks, and I want video.
Click to expand...
Click to collapse
Well you need to have a kernel with voodoo enabled like Entropy's or you can't get red cwm. The stock leaks HAVE to have a stock kernel for video to work however. Oh, and yes you can. You can do that or through SGS Kernel Flasher on the market. What do you need red for anyway?
Don't forget, if I helped you, hit thanks please
Sent from my SAMSUNG-SGH-I997 using xda premium

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Am I right ?

Ok ,my girlfriend bought a new infuse and now she wants a custom ROM preferably ics on it ! It's on 2.2.1 ATM so I read around n as far as I could find out here is what I need to do :
1. Use Odin stock GB package to flash stock GB, I found a thread but it says it had no bootloaders. This is the confusing part shouldn't the Odin have GB bootloaders ?
2. Once I m on GB bootloaders if I don't have root n cwm I flash a kernel to get those
3.then I flash a ROM as per instructions in OP
Am I right ? O am I missing something? Also would be a great help if someone would tell me which is the safest method to get GB bootloaders on infuse ? Thanks a lot in advance
Sent from my SGH-I897 aka Captivate running on ICS using the awesome XDA app !

No, not really any of that is necessary. Root the phone on 2.2.1, install CWM via ROM manager (found in Google play), download and install Cyanogenmod 7 (found at cyanogenmod.com) on her phone (no matter what version, just v7), then flash an ICS ROM the same way as the Cyanogenmod 7 ROM, no other stuff.
ROM install instructions:
Wipe data/factory reset
Wipe cache
Wipe dalvik cache
Install (Gapps if required)
Reboot
Sent from my GT-I9000 using xda app-developers app

Dint know that CM7 supported infuse, as their site didn't list infuse in devices supported!! Well I will take your word for it and go about doing that method u described ! Thanks
Sent from my SGH-I897 using XDA

adicool said:
Dint know that CM7 supported infuse, as their site didn't list infuse in devices supported!! Well I will take your word for it and go about doing that method u described ! Thanks
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Don't take his word for it, as I don't think he even has an Infuse. Cyanogen doesn't officially support the Infuse at the moment, so you won't find a CM7 rom there for the Infuse. Since you are still on 2.2 and have root, you can use Rom Manager from the Play Store to install recovery. You'll note that there isn't a choice for the Infuse in the device list. Choose Galaxy S i9000, and that recovery will work for the Infuse (Don't try to use i9000 roms on the Infuse, though, because they won't work without being properly ported.). Once you get CWM recovery, choose your rom from the Infuse development section here, and follow the instructions there for installation. We also don't advise using Rom Manager for much else, as some have had issues on the Infuse. It's best to do nandroid backups, rom flashes, etc. directly in CWM recovery on this device.
By the way, the previous poster has a Galaxy S i9000, and his instructions for flashing an ICS rom aren't correct for our device either. Be sure to follow the instructions found in any of the rom threads here once you get CWM recovery.
All that said, since you mentioned Odin, you could also just flash Option C with Odin from HERE, and you'll have AT&T Gingerbread with root, CWM recovery, and a bunch of other goodies. This is a good base from which to flash any other rom you'll find in the dev section.
You also asked about bootloaders for Gingerbread. If you take issue with seeing rainbow artifacts in recovery and in the boot animation (the only issue that you will have without them), then you will need to flash them separately. We don't include them in Odin packages, because a failed bootloader install is really just about the only way you can hard brick an Infuse. If you can sucessfully flash other items in Odin, and are on Gingerbread or ICS, download and extract THIS package, and flash the tar.md5 in Odin. In seconds, you'll have the bootloaders, and will never need to flash them again.

jscott30 said:
Don't take his word for it, as I don't think he even has an Infuse. Cyanogen doesn't officially support the Infuse at the moment, so you won't find a CM7 rom there for the Infuse. Since you are still on 2.2 and have root, you can use Rom Manager from the Play Store to install recovery. You'll note that there isn't a choice for the Infuse in the device list. Choose Galaxy S i9000, and that recovery will work for the Infuse (Don't try to use i9000 roms on the Infuse, though, because they won't work without being properly ported.). Once you get CWM recovery, choose your rom from the Infuse development section here, and follow the instructions there for installation. We also don't advice using Rom Manager for much else, as some have had issues on the Infuse. It's best to do nandroid backups, rom flashes, etc. directly in CWM recovery on this device.
By the way, the previous poster has a Galaxy S i9000, and his instructions for flashing an ICS rom aren't correct for our device either. Be sure to follow the instructions found in any of the rom threads here once you get CWM recovery.
All that said, since you mentioned Odin, you could also just flash Option C with Odin from HERE, and you'll have AT&T Gingerbread with root, CWM recovery, and a bunch of other goodies. This is a good base from which to flash any other rom you'll find in the dev section.
You also asked about bootloaders for Gingerbread. If you take issue with seeing rainbow artifacts in recovery and in the boot animation (the only issue that you will have without them), then you will need to flash them separately. We don't include them in Odin packages, because a failed bootloader install is really just about the only way you can hard brick an Infuse. If you can sucessfully flash other items in Odin, and are on Gingerbread or ICS, download and extract THIS package, and flash the tar.md5 in Odin. In seconds, you'll have the bootloaders, and will never need to flash them again.
Click to expand...
Click to collapse
Exactly what he said
:thumbup:
Sent from my thumb rubbing machine

Girl friends they always want something...I tried to explain this to my wife but noooooo....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

bigjoe2675 said:
Girl friends they always want something...I tried to explain this to my wife but noooooo....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
What is the rating on this thread?

qkster said:
What is the rating on this thread?
Click to expand...
Click to collapse

A few threads today are getting pretty entertaining, fellas. If I wasn't messing with Jelly Bean and had a network connection, I'd go to Tapatalk to slap some thanks. I'm all out for the day on the PC.

jscott30 said:
Don't take his word for it, as I don't think he even has an Infuse. Cyanogen doesn't officially support the Infuse at the moment, so you won't find a CM7 rom there for the Infuse. Since you are still on 2.2 and have root, you can use Rom Manager from the Play Store to install recovery. You'll note that there isn't a choice for the Infuse in the device list. Choose Galaxy S i9000, and that recovery will work for the Infuse (Don't try to use i9000 roms on the Infuse, though, because they won't work without being properly ported.). Once you get CWM recovery, choose your rom from the Infuse development section here, and follow the instructions there for installation. We also don't advise using Rom Manager for much else, as some have had issues on the Infuse. It's best to do nandroid backups, rom flashes, etc. directly in CWM recovery on this device.
By the way, the previous poster has a Galaxy S i9000, and his instructions for flashing an ICS rom aren't correct for our device either. Be sure to follow the instructions found in any of the rom threads here once you get CWM recovery.
All that said, since you mentioned Odin, you could also just flash Option C with Odin from HERE, and you'll have AT&T Gingerbread with root, CWM recovery, and a bunch of other goodies. This is a good base from which to flash any other rom you'll find in the dev section.
You also asked about bootloaders for Gingerbread. If you take issue with seeing rainbow artifacts in recovery and in the boot animation (the only issue that you will have without them), then you will need to flash them separately. We don't include them in Odin packages, because a failed bootloader install is really just about the only way you can hard brick an Infuse. If you can sucessfully flash other items in Odin, and are on Gingerbread or ICS, download and extract THIS package, and flash the tar.md5 in Odin. In seconds, you'll have the bootloaders, and will never need to flash them again.
Click to expand...
Click to collapse
Thanks a ton for the elaborate detail I.would try the Odin method as I an very comfortable with it but I've last question since u said that those packages don't have bootloaders , when I flash those Odin packages I will have GB on the phone but no GB bootloaders ? U mean I will run a GB ROM on froyo bootloaders? It's that even possible? I ask this because on captivate when I moved from froyo to GB we flashed Odin along with bootloaders so I had a GB ROM with GB bootloaders in fact other we were asked to first flash GB bootloaders n then flash a ROM ! And if that it's possible then all I have to do is just Odin that GB package without the bootloaders and then flash the bootloaders once and for all, right? Sorry for being a noob in this section but it's better being a noob rather than hard bricking a infuse lol
Sent from my SGH-I897 using XDA

adicool said:
Thanks a ton for the elaborate detail I.would try the Odin method as I an very comfortable with it but I've last question since u said that those packages don't have bootloaders , when I flash those Odin packages I will have GB on the phone but no GB bootloaders ? U mean I will run a GB ROM on froyo bootloaders? It's that even possible? I ask this because on captivate when I moved from froyo to GB we flashed Odin along with bootloaders so I had a GB ROM with GB bootloaders in fact other we were asked to first flash GB bootloaders n then flash a ROM ! And if that it's possible then all I have to do is just Odin that GB package without the bootloaders and then flash the bootloaders once and for all, right? Sorry for being a noob in this section but it's better being a noob rather than hard bricking a infuse lol
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Yes, you can have and run Gingerbread on the phone without GB bootloaders. The only side effect will be that you will see rainbow distortion in recovery and during the boot animation. Other than that, on the Infuse, Gingerbread runs fine on Froyo bootloaders. So, you are right. Odin the GB package without the bootloaders, and when that's done flash the bootloaders. You won't have to flash the bootloaders again as they can't be downgraded. Froyo runs fine on the upgraded bootloaders, too, by the way.

Oh sweet ! Thanks a ton will flash it now , she has been eating my head to get rid of the at n t bloatware finally I will get her phone on ics thanks a ton for pointing me in the right direction and bearing with my noobish questions ! Thanks to everyone
Sent from my SGH-I897 using XDA

Hi is there any way to know what bootloader i'm on? Right now running Aeon 1.4 with red recovey without any glitches. No rainbow or other problem.
Sent from my SAMSUNG-SGH-I997 using xda premium

rainbow99984 said:
Hi is there any to know what bootloader i'm on? Right now running Aeon 1.4 with red recovey without any glitches. No rainbow or other problem.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
If you have no rainbows or glitches, then the bootloaders that are on the phone are fine. If you are using Aeon 1.4, and don't have any glitches in recovery, then it is safe to assume that you most likely have the GB bootloaders. Some kernels have workarounds for the rainbow artifacts, so if you flash something later and find that you have rainbow distortion, you can always flash bootloaders at that time. For now, if all is good, then there is no need to worry about bootloaders. To answer your question, though, the best way to know is to check recovery and boot animation. If there is no distortion, and everything boots properly, then you have the proper bootloaders for your setup.

Thank you for the fast reply. Yes i dont have any problem there. Reason i wish to make sure is- my phone no longer recognised in pc hemidall or odin, tried all but failed. It charge with usb but no luck in download mode. Willing to try ics so anxious.
Sent from my SAMSUNG-SGH-I997 using xda premium

rainbow99984 said:
Thank you for the fast reply. Yes i dont have any problem there. Reason i wish to make sure is- my phone no longer recognised in pc hemidall or odin, tried all but failed. It charge with usb but no luck in download mode. Willing to try ics so anxious.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Yeah, those issues aren't related to your bootloaders. You'll want to try different USB ports, another cable, uninstall and reinstall your Samsung USB drivers (and your Heimdall libusb driver for one specific USB port), etc. But, the bootloaders aren't to blame for your issues there.

Ye i tried. I'm on ubuntu so heimdall is my choice. Usb could be board problem. So willing to play safe so that i wont got in situation where i need heimdall i know my chance is slim for ics considering the issue that may occur.
Sent from my SAMSUNG-SGH-I997 using xda premium

If you are that anxious to flash ICS, you can do it without the bootloaders.. you will just have the rainbows with which you can live for a while.
Then later when you get a chance of using Windows, use Odin to flash them.
Sent from my sweet and buttery Infuse

Codename Android 2.0 stuck in win recovery

I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?

frogcity said:
I used the CWM to install CNA b4.zip, the Codename Android package.
Now all my phone does is boot into a menu that says:
install wipe
backup restore
mount settings
advanced reboot
How do I get into ICS?
Click to expand...
Click to collapse
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium

daothanhduy1996 said:
I think u didnt follow what I wrore in instruction: YOU MUST BE ON ICS TO FLASH THIS ROM...anw, just heimdall back to stock, then flash CM9 and then any ICS rom else u like...remember to stick to instructions next time man...there must be a reason that we (OPs) put it there but not for fun lmao...
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I was on ICS (Cyanogenmod9) when I tried to flash it.

frogcity said:
I was on ICS (Cyanogenmod9) when I tried to flash it.
Click to expand...
Click to collapse
Oh so sr, my mistake (inform more info next time bro ^^) so, just try to redownload or recopy and reflash cause I flashed it normally from CM9
Sent from my SGH-T959V using xda premium

sounds like he lost root. You will probably need to use heimdall one click to get back to kj6. Use the one I packaged that can be found here.
http://forum.xda-developers.com/showthread.php?t=1822626
Then flash to ICS and then to the rom you want.

I had this happen to me when I tried to flash CNA b4. No matter what I did I could not get out of recovery when trying to flash. I thought for sure I would have to go back to stock but I just fully wiped and reinstalled AOKP with no problems. It may have been a bad download or something but I had that issue as well.

CMW??

Hey guys i just got my old old s 4G back and i want to get 4.3 or 4.4 on it and i just rooted it with kingo and it worked but i need to install a recovery, so how can i get cwm 5 on this I've looked just to much info scattered thanks!

[Heimdall][One-Click] The T959V Heimdall One-Click Collection is probably a good place for an experienced user to start.

On top of the fact that you need cwmr 6.0.4.x to flash 4.4... Which I don't think is available on SGS4G right now anyways.
Sent from my Nexus 5 using Tapatalk

jeffsf said:
[Heimdall][One-Click] The T959V Heimdall One-Click Collection is probably a good place for an experienced user to start.
Click to expand...
Click to collapse
After that flash cm9 and then you can flash any JB/KK ROM that u want
sent from me

bhundven said:
On top of the fact that you need cwmr 6.0.4.x to flash 4.4... Which I don't think is available on SGS4G right now anyways.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
But you wrote all the updater scripts that allow our phone to flash the MTD kernel first then reboot into that kernel and flash the ROM tho . #youdaman #bryan
@OP: So after a one click back to BML (which has CWM 5.x) and JB/KK is on ur way to flash
Sent from my GT-N7000 using Tapatalk

daothanhduy1996 said:
But you wrote all the updater scripts that allow our phone to flash the MTD kernel first then reboot into that kernel and flash the ROM tho . #youdaman #bryan
Click to expand...
Click to collapse
That's correct! Nothing will stop you from oneclick back to stock and flash JB/KK.
On reboot, the cwm updater will (should) do the right thing.
Although, I did not write the scripts for JB/KK. So, don't blame me for those that don't work (yet)