Thanks to spjetrovic we have the update.zip for the GB update for your use now
http://www.multiupload.com/HAG3RFTBY6
1. Follow imnuts instructions for preparing for OTA found here http://rootzwiki.com/topic/10202-how-to-prepare-for-the-gb-ota/
2. place file on root of SD card and rename to update.zip
3. boot to stock recovery and select apply update.zip from sd card
It takes a while to complete, so be patient. Make sure you have plenty of battery.
ps. No one is responsible for what you do to your phone except you. This has been tested by at least a dozen people in IRC and works flawlessly when you follow the directions.
pss. this build is 4 days newer than "EP4P" regardless of what the numbering scheme may be.
This belongs in the dev section, also what is included? ROM, KERNEL, RADIO?
Sent from my SCH-I510 using XDA App
Very cool! Downloading
edit: guessing the keyword here is "STOCK RECOVERY"
Almost 4got, thanks!
Sent from my SCH-I510 using XDA App
GOS,
It is the OTA update that will roll out later next week. It contains all the changes from EE4 to EP4 rom/kernel/recovery/ect.. It is just changes, by no way a stand-alone flash.
And I didn't post in Development, because I didn't develop it. It can be moved if the mods think it belongs there.
Did any of you successfully rooted this?
Just in case no one completely reads the post by Imnuts because I know most people don't.....
You HAVE to flash imoseyon's kernel or you recovery will NOT stick!
fortesquieu said:
Did any of you successfully rooted this?
Click to expand...
Click to collapse
Sure, just flash CWM then Imoseyon's kernel and you are rooted
spc_hicks09 said:
Just in case no one completely reads the post by Imnuts because I know most people don't.....
You HAVE to flash imoseyon's kernel or you recovery will NOT stick!
Click to expand...
Click to collapse
How do you flash Imo's kernel if my recovery doesn't stick, and can't get into recovery?
fortesquieu said:
How do you flash Imo's kernel if my recovery doesn't stick, and can't get into recovery?
Click to expand...
Click to collapse
you can't let the phone boot after you flash CWM. unselect auto-reboot and then boot straight to recovery after flash
Here are my instructions for getting all this to work:
BEFORE YOU ODIN BACK TO EE4, MAKE SURE YOU HAVE THE SU FLASHABLE ZIP, THE OTA UPDATE AND IMOSEYON'S KERNEL ON YOUR SDCARD!
Make sure the update file is renamed to "update" and that it's on the root of your sdcard. (not in any folders or anything)
Odin back to EE4. Reboot normally.
Turn the phone off, then reboot into Stock Recovery and run the update.
Once the update finishes and the phone boots regularly. Reboot into Download Mode and plug the phone into the computer.
Start Odin, Uncheck "Auto Reboot", select PDA, NOT PHONE!
Click on the PDA tab and find your recovery file then click "start."
Once it is done and you see the word "PASS" on Odin, unplug the usb cable and press down all three buttons to boot into recovery (volume up, home, power)
Once in recovery, wipe cache, wipe dalvik, mount /system and flash the SU flashable zip.
Go back and wipe cache and dalvik again, mount /system again and flash the kernel.
After that, your recovery will stick and you're good to go. You are now rooted and running on EP4D.
Sorry for the dumb question but after searching, I can't find the answer; how do I access the stock recovery?
billygoat555 said:
Sorry for the dumb question but after searching, I can't find the answer; how do I access the stock recovery?
Click to expand...
Click to collapse
Vol.up+ home+ power
release power when you see the samsung logo. release the other two a few seconds after
Nevermind lol
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
WildH said:
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Yes sir. ... ...
WildH said:
If I flashed the unrooted, ep4p leak from last month, will I have to flash back to ee4 to install or recieve the official new update?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
You will only get this OTA or be able to use this update if you are on stock, unrooted EE4. You can't get there from any other point.
You can also wait a bit (probably less than a week) and someone will publish full Odins of EP4D. I'm personally not leaving EP4P until we have a deodexed version of EP4D and some themes.
Ah hell..that is a pain in the ass. I'll wait to see if they fixed the crackling on incoming calls before I go through the hassel.
Sent from my SCH-I510 using XDA App
I love how fast we hop on these leaks and officials lol
Where do you get the proper "SU flashable zip"?
Sent from my SCH-I510 using xda premium
Related
Initially, I was going to just have a post for stock ED2, but I got a request for an ED1 update.zip as well, so this will be for CWM package for Stock ROMs, and I'll try to keep it up-to-date. These packages are fully stock, bloated, and Odexed.
Currently, we only have two system releases available (officially) and both are available here. As more updates come out, I'll update this post as I have time to create the package for said updates. If someone else can create it before I do, then I'll just edit the post and link to the download, giving the creator proper credit.
NOTE: The ED2 was packaged with the kernel from ED1, so flashing this may not necessarily restore OTA update functionality. Also, flashing any of these packages does not guarantee OTA functionality. The ED2 package should now have the ED2 stock kernel in with it
WARNING: If you are currently on a Voodoo Lagfix kernel and are running with the lagfix enabled, you will need to disable the lagfix fully before flashing any stock ROM package. Failure to do so will result in a non-booting phone and could also potentially lead to data corruption.
Installation
1. Download the zip file and place it on your SDCard.
2. Boot into CWM Recovery
3. Install ZIP that you downloaded.
4. Reboot and enjoy your bloated goodness.
Download - ED1
Download - ED2
Download - EE4
has anyone tried to get root shell with recovery on a stock unrooted device?
Thanks imnuts, I appreciate the work. One question, about OTA, if for some reason it doesn't restore OTA abilities, can we manually request an OTA or would it be gone completely.
For me stock is something I will do between ROM's or for repair purposes. Once the custom ROMS get a bit further along I will be on several. I need to collect all of my notes on what to do when and how so I don't mess up my phone, again.
Good to know that CWM will now allow us to disable Voodoo and restore FTW.
RaptorMD said:
Thanks imnuts, I appreciate the work. One question, about OTA, if for some reason it doesn't restore OTA abilities, can we manually request an OTA or would it be gone completely.
Click to expand...
Click to collapse
If needed, we can probably hack together a zip file that can be flashed in CWM to do incremental updates to various system files to return full OTA update-ability. If we ever get a full Odin image, that would also work.
Also, updated the title and OP. I'll just use this to post stock ROM zip files meant for flashing in CWM. Currently have ED1 and ED2 in the first post, will add more as we get updates.
This is great, now we can reboot into recovery, disable voodoo, use one of the two update.zip files and then use Odin to reflash the root/kernel/cwm package. Great work.
Will this effect clockwork
Sent from my SCH-I510 using XDA Premium App
papi92 said:
Will this effect clockwork
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Yes. No more CWM after flashing these. You will be back on stock kernel/recovery.
Hopefully no one tried to flash either of these. There was an error in the updater-script that I just fixed, so if you downloaded the files "just in case" before this post, delete and redownload.
Ed2 worked for me lol
Sent from my SCH-I510 using XDA Premium App
I flashed ed2 yesterday at 12am et and have had no problems
Sent from my SCH-I510 using XDA Premium App
papi92 said:
I flashed ed2 yesterday at 12am et and have had no problems
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Odd. I would still re-download just to be safe though.
Will do
Sent from my SCH-I510 using XDA Premium App
Thanks imnuts, I will redownload when I get to the office on Monday (faster connection).
Can I rename this to update.zip if I can't get past the stock recovery screen and do an update zip command line from stock recovery?
brabe1979 said:
Can I rename this to update.zip if I can't get past the stock recovery screen and do an update zip command line from stock recovery?
Click to expand...
Click to collapse
No, these packages have no signature, so stock recovery will not flash them.
Imnuts, are these rooted? or will you lose root by flashing?
Can some one help me how do i root my charge i see the one click but thats 4 ed1my phone say ed2
Sent from my SCH-I510 using XDA App
hoppermi said:
Imnuts, are these rooted? or will you lose root by flashing?
Click to expand...
Click to collapse
I believe that they are still rooted as I don't think I removed su/Superuser.apk/busybox from them before zipping them up.
If I want to go back to ED1 with the abillity to do OTA ED2, will flashing this ED1 package do it? (I am on pbj time and ED2 rooted/cwm).
I have disabled voodoo, so basically I'm asking if I should use the ED1 ODIN downgrade or this?
Ultimately I want to be completely stock, on ED1, stock kernel, stock recovery, with the ability to update to ED2.
Phone is currently: PBJ time Kernel (no lagfix), ED2/rooted/cwm
Got my answer in IRC. ODIN works for this problem
Ok, since EE4 came out, I needed to use these last night. Found that ED2 update package needs fixed, but I got the file I needed to fix it (stock ED2 kernel) and I'll do that as soon as I get a chance. ED2 is also rooted, but ED1 is completely stock, and there is now a stock EE4 package. Look for deodexed versions coming soon as well.
Ok so im new and I flashed my SGS4G using these directions to a T!
i would start with krylon final cwm. his directions are pretty straightforward. i used root explorer to move the file where it needed to be.
http://forum.xda-developers.com/show....php?t=1099374
i am assuming you downloaded the rom already from the CWM rom section in the bible. its up to you. im biased towards bionix frost, but black ice is just as amazing.
i would also dl the ext converter and bali 3.1 kernel as well. (http://forum.xda-developers.com/show....php?t=1123039) (http://forum.xda-developers.com/show....php?t=1080871). place all of the zip files you download into the root of your sd card....which means that if you connect your phone to the computer and open it using windows explorer, it is that first window, which lists all of the folders. dont put these files in folders or anything.
once that is done, i restarted my phone in recovery shutting down fully and pressing the power+volume up+volume down. once there, i went to reinstall packages to get into cwm.
then when this loads, i wiped the system/factory reset and wiped the cache. then i went to mounts and storage and mounted my system. (the final mounting output should be: unmount, mount, mount, unmount). i then scrolled to "go back"
i choose install zip file from sd card. choose zip file, which should be the second option if my memory serves me right. scroll of ext converter and install that one. then when that is done, go back to install file from sd card, choose black ice or frost (i LOVE frost) and install that one. then when that is done, i flash my bali 3.1 uv kernel. when that is flashed, i click go back and choose reboot system. once that is done, you will see the galaxy s screen for like 5 min or so followed by the team whiskey logo. once you see this, it will take another minute or so to load up. once you see that the rom loads up...LET THE PHONE SIT FOR 10 minutes. i know it seems long, but just let it sit.
after 10 min or so, i would go into your about phone options and check and see that you have bali3.1 and that the rom is correct.
do these tweaks as well
fugu (http://forum.xda-developers.com/show....php?t=1127069)
init.d (http://forum.xda-developers.com/show...ghlight=init.d)
you can flash a modem too (http://forum.xda-developers.com/show....php?t=1117331) using the same process as flashing any other zip file.
remember, the first option in choosing a zip file is update.zip from krylons final cwm. do not flash this after the rom/ext/whatever. im not sure if this has been addressed (im still a noob), but everytime i did that, i bricked my phone. lol. so just to answer your question before you wonder...cause i always wondered whether i should flash that or not. lol.
But after all this I get stuck at the galaxy S screen for more than 5minutes although it will let me back into recovery mode. Its called the "CwM voodoo lagfix recovery v3.0.2.8x" and then gives me a list of options. WHAT SHOULD I DO???
I would ODIN back to KD1 and redo it, but really make sure you have the mounts correct (I know you checked this already, but check it again.) If it still does not work, then I would still go back to KD1 and then try it again by re-downloading all the zip files again. That's what I had to do.
Those were my directions! Was my fault. Ext4 needs a supported kernel. You have one now. Go back into cwm and retry everything starting from wiping the cache and system. sorry about that.
Check your mounts after the ext4 converter just to be safe.
Sent from my SGH-T959V using XDA Premium App
Also, don't worry, we've all soft bricked at one point.
Sent from my SGH-T959V using XDA Premium App
ok i restored my phone back to factory settings last night.. So what do i need to download that i didnt last night so this darn thing works???
Yeah haha well im just gld i was able to fix it without odin. thats sounds like a pain... Any Jager555 i noticed youre running Bali 3.1 UV voodoo I downloaded the bail v3.1 voodoo is that why it didnt work?
jager555 said:
Also, don't worry, we've all soft bricked at one point.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
No, it didn't work cause you were coming off of stock. The ext4 converter needs a compatible kernel...which you didn't have. Now that you have that red cwm, you are running a compatible kernel. So everything should work now. Reflash everything like I started before after you wipe everything. It should work ok. Like I said it was my fault for not mentioning that, not something you did.
Sent from my SGH-T959V using XDA Premium App
If you are no longer on the bali kernel, flash bionix, so you have bali 2.1, and then flash everything according to my directions. Ext4 will only work if you have the compatible kernel.
Sent from my SGH-T959V using XDA Premium App
Ok so I went into recovery mode and it brought me to the red voodoo screen now should i go into mounts and storage and change that stuff again or what should i do first???
jager555 said:
If you are no longer on the bali kernel, flash bionix, so you have bali 2.1, and then flash everything according to my directions. Ext4 will only work if you have the compatible kernel.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
wipe the data and cache. check mounts. flash ext4. check mounts. flash bionix. flash 3.1. go back. reboot system from cwm. wait. let me know how it goes. i'll be online.
Ok i just followed your directions again. But should i flash Bali 3.1 again if i removed it?
archerpro12 said:
Ok so I went into recovery mode and it brought me to the red voodoo screen now should i go into mounts and storage and change that stuff again or what should i do first???
Click to expand...
Click to collapse
once you flash bionx, it replaces the kernel with 2.1, so yes. reflash 3.1
crossing my fingers...hoping it works...
any updates??
my phone is now flashed with bionix frost! thanks a million jager555 team whiskey drhonk and anyone else involved!
jager555 said:
once you flash bionx, it replaces the kernel with 2.1, so yes. reflash 3.1
crossing my fingers...hoping it works...
Click to expand...
Click to collapse
remember to leave it for about 10 minutes (i know its hard to do that)
check out my first post and look into the fugu and init.d tweaks.
glad to help. this community is awesome.
Well, I attempted to use SGS kernel flasher to install the infuseGB kernel. Now I'm stuck with a bootloop and I need help fixing it.
Anyways, Odin confuses the crap out of me. I put my phone in download mode but all odin does is light up a box with com3 in it. I've reinstalled drivers but I'm not sure what to do next.
All help is appreciated.
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
prairied0gg said:
I had a similar issue after flashing a kernel that way.
What ended up fixing the boot loop was using Odin to flash the stock Rogers kernel.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Click to expand...
Click to collapse
I'll try that if I can:
A: figure out how to use odin properly
B: find the stock AT&T kernel
This has turned into one big mess.
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
skatin707 said:
Well, I figured that out.
Now what is the proper way to flash a kernel from bone stock?
I'm rooted.
I'm installing 3e recovery.
Click to expand...
Click to collapse
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
bignate78 said:
There's three ways...
1. SGS flasher (obviously not working for you)
2. Flash from recovery if kernel is in a zip file
3. Flash through Odin or Heimdall
Remember to flash a GB kernel you must first be on a GB rom!
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
skatin707 said:
Ok, I think this is my problem. I'm not on a GB ROM I don't think.
I've got the kernel in zip format. Should I install, say for example, the doctorz ROM and them flash the kernel?
My cwm recovery is dark green,will I still be ok?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
download the attatched kernel zip
Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
Download chosen rom zip and place it on your internal SD card.
Power off your phone.
With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
Select "install zip from sdcard" and select chosen rom zip.
Once that finishes, select "wipe data/factory reset".
Select "reboot system now".
once rebooted sgs flash the any GB kernel you want, remember to read and make sure which ever kernel your choosing is GB or Froyo
I flashed it, and thankfully it didn't bootloop. However, my cwm is still green.
Scratch that, we are in the red now! You are a king among men.
Sent from my EPAD using xda premium
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
wizardofkoz said:
Don't know if this helps but my infuse was stuck in a boot loop after adjusting the default launcher. Going into CWM and reflashing the su fix got my phone to boot properly.
Click to expand...
Click to collapse
Mine was kernel issues.
Sent from my SGH-I997 using xda premium
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge
sweet thanks
Sent from my SCH-I510 using xda premium
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge
I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2