Hi, I recently flashed CM11 on my A3000H and everything was great. Thanks to Olivier. But then, I erased my IMEI number in that process. I have the number and I want to write it to my tablet, but I am not able to access the engineering mode; MobileUncle Tools just goes back to the previous screen, and the MTK Engineering mode app gives me a "Cannot find Engineering Mode app" message. I am not even able to add a google account on my tablet. Please help me as soon as possible. Thanks in advance.
Related
HI devs,
I have Micromax Android One(sprout) with 5.1.x. After flashing STOCK KITKAT by SP flash tool. i lost my IMEI(shows INVALID:crying.
So i searched a lot for restoring IMEI on MTK devices.(NONE OF THEM WORKED). Listed below tried methods:
> IMEI MAKER (IMEI REPAIRER, IMEI Flashable)
Manually replaced MP0B_001 to NVRAM/X/X/X blah blah
> MKT Droid Tool
followed all steps, inserted my IMEI, still not worked.
> Reflashed KITKAT ROM, CM 12. (Still no progress)
Methods remaining to try is
ENGINEERING MODE
but then i realized my ENGINEERING MODE is not working.
> i tried to open with *#*#3646633#*#*. (nothing happens. dialer clears all numbers)
> Used ROM Toolbox Lite and Mobile Uncle
it shows to options ANDROID and MTK setting
when i click MTK setting it not opens enginnering mode.
So at last conclusion.. my issue is ENGINEERING MODE is not working.
any one have solution for this. . Thanks in advance..:good:
HI XDA,
i got my lenovo a5000 its good but ihave problem now. i updated my phone then it turns out in "no command" on the screen with android lying their with tranngle and exlamation i have presed mutiple button but all in vain.
second i am not able to flash any cutom recovery,there is not a single solution regarding this phone that how to root as all rooting softwares i.e kingoroot,onclick.iroot,farmroot,not a singe one is helpfull for this phone i have bricked this phone numbers of times but all in vain .XDA Please look into it is this phone has an insecure kernal???I also have tried to mtk driod tools for rooting but nothing,readback operation also helpless as revocery not copied when i process it in mtk driod tool.
i really really need your guidance or help.plz keep sharing you guys are doing a great work.
jawadahmad27 said:
i got my lenovo a5000 its good but ihave problem now. i updated my phone then it turns out in "no command" on the screen with android lying their with tranngle and exlamation i have presed mutiple button but all in vain.
second i am not able to flash any cutom recovery,there is not a single solution regarding this phone that how to root as all rooting softwares i.e kingoroot,onclick.iroot,farmroot,not a singe one is helpfull for this phone i have bricked this phone numbers of times but all in vain .XDA Please look into it is this phone has an insecure kernal???I also have tried to mtk driod tools for rooting but nothing,readback operation also helpless as revocery not copied when i process it in mtk driod tool.
Click to expand...
Click to collapse
If your device is bricked, check this article: http://firmwares2you.blogspot.in/2015/07/lenovo-a5000-firmwarestock-rom-to.html
As far as custom recovery, you can create CWM easily on your own for MTK device if proper drivers are installed in computer..
Check this out: http://www.theandroidhow.com/2014/05/how-to-make-flash-cwm-recovery-without.html
Dear GokulNC,
i have done this according to your suggestion but no positive thing happen
i am getting this error when i select stock boot.img it ask create cwm i select yes after that i got this msg on rigt pane in mtk driod tools.
--->>> Connect to device <<<---
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
--- ERROR :No find KernelGZ
--- ERROR :No Split Boot Image
--- task is complete ---
hi pleaseeeeee helpppp!!!!!!!!!!!!!!!!!!
I bought a new Lenovo A806 (original version android 4.4.2 - build VIBEUI_1432_ST_A806).
There were lots of Chinese writings imbedded in the rom and apps so I rooted the phone and tried to disable some apps and stupidly removed the stock phone dialer and contacts. Then whatever replacement app I tried from the Google play store did not work.
The replacement dialer gives me the message:- “You have removed/disabled Stock phone application, its required to properly functionality.” (pardon the Chinese English)
The phone cannot read the sim card and the IMEI number has disappeared. Following forum advice, I installed “mobileuncle” but cannot insert the IMEI number manually. When I go to Engineer mode, CDS information and try to go into Radio information, I get the message - “Unfortunately, Common Data Service has stopped.” So I cannot even go into Radio information.
I researched on the internet and tried to change the Rom. I installed the required version of TWRP recovery and after trying a few Roms, I managed to get Version VIBEUI_V2.0_1508_7.85.1_ST_A806 installed.
This version behaves better but still no IMEI number. Instead I get a different message – IMEI invalid.
When I try to call, I get this message: - “To place a call, first turn off Airplane mode”
But Airplane mode is off. But at least the dialer seems to be working and I am able to add contacts.
And I can get to radio information from mobileuncle with this version but when I type the IMEI number after the ST.., I get the message: “This command is not allowed in userbuild”
Even with a space between the ST and +, it still does not work and I get a different message, “at command is failed to send” I even rebooted after inserting the IMEI number and still no joy.
However, the wifi seems to be working on both above version and this.
I have a backup of the original corrupted rom so if anyone has a solution for either one, please help.
I installed the rom’s through TWRP recovery which is on my phone. I press volume and on/off buttons to enter into this.
I tried to install a flash tool and all the required drivers on my computer, I am using windows 10. I cannot seem to get the flash working.
Nitai1008 said:
I bought a new Lenovo A806 (original version android 4.4.2 - build VIBEUI_1432_ST_A806).
There were lots of Chinese writings imbedded in the rom and apps so I rooted the phone and tried to disable some apps and stupidly removed the stock phone dialer and contacts. Then whatever replacement app I tried from the Google play store did not work.
The replacement dialer gives me the message:- “You have removed/disabled Stock phone application, its required to properly functionality.” (pardon the Chinese English)
The phone cannot read the sim card and the IMEI number has disappeared. Following forum advice, I installed “mobileuncle” but cannot insert the IMEI number manually. When I go to Engineer mode, CDS information and try to go into Radio information, I get the message - “Unfortunately, Common Data Service has stopped.” So I cannot even go into Radio information.
I researched on the internet and tried to change the Rom. I installed the required version of TWRP recovery and after trying a few Roms, I managed to get Version VIBEUI_V2.0_1508_7.85.1_ST_A806 installed.
This version behaves better but still no IMEI number. Instead I get a different message – IMEI invalid.
When I try to call, I get this message: - “To place a call, first turn off Airplane mode”
But Airplane mode is off. But at least the dialer seems to be working and I am able to add contacts.
And I can get to radio information from mobileuncle with this version but when I type the IMEI number after the ST.., I get the message: “This command is not allowed in userbuild”
Even with a space between the ST and +, it still does not work and I get a different message, “at command is failed to send” I even rebooted after inserting the IMEI number and still no joy.
However, the wifi seems to be working on both above version and this.
I have a backup of the original corrupted rom so if anyone has a solution for either one, please help.
I installed the rom’s through TWRP recovery which is on my phone. I press volume and on/off buttons to enter into this.
I tried to install a flash tool and all the required drivers on my computer, I am using windows 10. I cannot seem to get the flash working.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. For the best results, I ask that you repost your question here:
Android Q&A, Help & Troubleshooting
You'll receive expert advice there. Good luck!
My Holly T00 imei goes blank and i have tried many method of recovering, this all to end up to nothing, i noticed this when i flash recovery to my phone with rashr and i think i think maybe the recovery is wrong or its not compatible with phone, The phone is booting fine but the imei is null and cant read the simcard, It shows "insert sim card" whenever i boot the phone, ave flashed different recovery so as to solve the prob, i tried to rewrite the imei with "Mobile uncle tools" "chamelephon" it those apps could not change the imei., i even have my imei backup.., i load the imei backup with "Mobile Uncle Tools" it installed successful but when i reboot the phone,, it is still null, :crying:
The worst part is that i could not find the phone stock rom online, i have searched tired, The only rom i see is for Hol-U19 and my mobile phone is Hol-T00,
.
Please help Me out!
Youngstallion said:
My Holly T00 imei goes blank and i have tried many method of recovering, this all to end up to nothing, i noticed this when i flash recovery to my phone with rashr and i think i think maybe the recovery is wrong or its not compatible with phone, The phone is booting fine but the imei is null and cant read the simcard, It shows "insert sim card" whenever i boot the phone, ave flashed different recovery so as to solve the prob, i tried to rewrite the imei with "Mobile uncle tools" "chamelephon" it those apps could not change the imei., i even have my imei backup.., i load the imei backup with "Mobile Uncle Tools" it installed successful but when i reboot the phone,, it is still null, :crying:
The worst part is that i could not find the phone stock rom online, i have searched tired, The only rom i see is for Hol-U19 and my mobile phone is Hol-T00,
.
Please help Me out!
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately I can not find any firmware for your device on xda, I'm pretty sure flashing the wrong recovery has affected your partition table. If you try asking here
https://forum.xda-developers.com/android/help
hopefully someone will upload the firmware for you
Good Luck
Sawdoctor
Hello, I want a solution for recovering my Alcatel One Touch Pop Icon Model: 7040T. The problem is, I cannot enter into the recovery mode. While entering the recovery mode, my phone freezes in the logo screen. But,when I power on my phone normally, It shows a message that "Security Error: This phone has been flashed with authorized software and is locked. Call your mobile operator for addition support. Please note that repair/return for this issue may have additional cost. ". I want to flash the Stock Rom. I want to use this phone.Can anyone please give me the step-by-step instructions for this solution? Thanks in Advance.
me too
same here, although mine is stuck on main logo, not going to recovery, niether detecting in Pc