I have successfully flashed the flufy_tendo 6pack ROM ( Android 4.4.2 kitkat v1.5.4 AROMA ) on this device and everything is almost ok.
The only problem y have is this one : I can´t connect the mobile with the PC ( Windows 8.1 64 bit ) via USB ( only charge mode is allowed ).
I had a similar problem with a previous ROM (EMUI 2.0 ASAP from flufy_tendo) but connecting the mobile to a PC with windows XP I was able to solve the issue.
Now is impossible to connect via USB, Wifi, PdaNet+ and so on in both operating system.
I´have tried to reinstall drivers in various way without success ( also as suggested here: http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773 ).
Do you have any idea ?
Thanks in advance.
Hello Specialists!!
I have an really big problem with my phone: "SM-J700F"
I am not able to connect via odin or kies to this one.
But in windowes explorer (Win7 64bit) everything is visible.
In MTP Mode, Usb-Storage and PTP mode.
Also I can acess to the phone via the explorer.
But not with odin and/or Kies.
I tried to installit several times (Kies also Kies3)
Then I tried another win7 computer, but with same result.
The reason is, i wont to root the phone, because of low memory, even after reseting to factory.
I hope really a lot that there is an solution!!!!
Many greetings
Robert
Additional information odin
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
hook02 said:
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
Click to expand...
Click to collapse
Hello, Please what I should try?
BR
Robert
Try this maybe this would help yah connecting thru odin... settings > developers option > able OEM unlock
---------- Post added at 07:38 AM ---------- Previous post was at 07:33 AM ----------
Rooting J7, download a compatible twrp n superuser zip file on XDA, and place the superuser in yur device, then flash twrp via Odin( wait 2 to 4 minutes then Pass appears n yur phone reboots) then go to recovery mode then install superuser.zip
I don't know - not working at all
Hello!
Thanks for supoort!
Yes, I tried always: developer options on and OEM unlock. (on 2 Computers with win7)
But there is on both no entity below ID:COM in odin.
So there is no nonnection... (also in windows, when phone is normal connected (not via download mode) there is no connection from ODIN and KIES)
Bute another phone Galaxy S5 Neo is working.
Shi.....
Many thanks for support!!!!!!!!!!
BR
Hook
Can anybody support me
Hello
Is any possibility for helping?
BR
Robert
Some News
Hello!
What I found out:
When I use *#0808#
There is SP selected and RNDIS+ACM+DM+ADB
Bit when I select MTP+ADB the other one is not deselected and I cannot continue?
Means with OK - no function and Reboot - no function (then both are selected....!)
Do you can support me here?
BR
Hook
samsung note 2
- mtp working but can't detect on kies,smart switch,sync driod
- driver installed to pc
- usb debugging mode on/off
- 4 cables changed
done everything still can't connect to those to make an backup :crying:
OK FINALLY SOLVED !!! after reinstall Android ADB Interface Drivers.
Redmi note 5 pro(miui 10 stable) connection to computer is success but show empty folder
Solution -Last night i tried to install new theme editor of miui 10 in Computer allowing usb debugging & than connection made however they install "show app" in mobile automatically ;security center show that this app is viruse, i just ignore warning & allowed install but connection was not succeed after many tried.. I just uninstall everything Later i just connect ph to pc but this problem happend - ph connected but folder show emptyI
tried -
1 install usb adb driver - nothing happened
2 qualcomm driver nothing happend
3 mannuly install drives - nothing happend
Finally?
4 i run miui sequrity app(already installed by miui in every phone) & run full scan (defenation-tencent)They closed devlover & problem solved
Now computer connected working fine..
So guys if u have same issue try that last step only (becuse window pc has already mtp driver this is happening by ph not by pc so don't waste ur time in finding drivers?)
(if u changed driver in pc? so just do- device manager-portable device-android(or wahtever named shows) - upadte driver-browse computer-let me pic-UNIVERSAL USB BUS DRIVER-MTP..) Ok .. Yoo?
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Unlock bootloader first. It takes one week (168 hours) to be accepted by xiaomi.
Thank you for your reply but have you read anything i wrote
Try to check this Guide.
hellokelly said:
the miflash unlock too does not recognize the phone ( and yes I have done all other steps of creating an account, tying a phone number,phone is logged in with the miaccount, updating it to 6.5.224.4 ,putting phone to fastboot enabling developer options)
fastboot devices also does not turn up with anything because I do not have any drivers installed ( nowhere in website it says i need to manually find drivers but i am assuming that is the issue because in device manager it says no drivers installed )
how do i install drivers ? where do I find them ? after googling a little I couldn't find anything official in qualcomm website or poco xiaomi website my old phone was an intel one and installing drivers was as easy as going to the official intel website and downloading them
if someone can point me in the right direction i'd be glad
Click to expand...
Click to collapse
It sounds like you need the adb drivers installed. Have a look here and see if that helps.
Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download
Here, we provide free Xiaomi Poco X3 ADB Driver, PC Software & User Manual Download with single click on the download link below.
www.xiaomidriversdownload.com
That website failed to give me the drivers nothing happens when I click download / not to mention that it looks like one of those auto-generated spam websites to trick search engines to get clicks and push dubious phishing software and ads to unsuspecting users I think you should remove that link.
but I managed to fix my issue quickly after searching a bit more and looking at a youtube video where a guy came across the same problem I experienced
Can a mod here and or someone in lineageOS website change the
tutorials or guides or add additional info ?
DOWNLOAD THE MI UNLOCK TOOL is a bit misleading , because the newest version of the miunlock tool 6.5 and the version you download 5.5 etc.. when you click on download
https://en.miui.com/unlock/download_en.html on this webpage
DOES NOT CONTAIN ANY DRIVERS you have to find the older versions by clicking FAQ and going here :
https://c.mi.com/thread-2262302-1-0.html
and download 4.5 and lower because the driver_install.exe file
DOES NOT EXIST in the newer versions of the tool which creates the problem I am having.
Xiamoitool V2
GitHub - francescotescari/XiaoMiToolV2: XiaomiTool V2 - Modding tool for xiaomi devices
XiaomiTool V2 - Modding tool for xiaomi devices. Contribute to francescotescari/XiaoMiToolV2 development by creating an account on GitHub.
github.com
at this github page also supposed to work and install drivers but I have not used it.