HI
I have modded 2 Phones with Cyanogen Mod 7
1. HTC Wildfire (Rooted but not unlocked) CM 7 Final
2. ZTE Blade (San Francisco, Rooted and unlocked) CM 7 RC 4
My problem is that I cannot connect either phone to my PC to back up the SD Card files as there no longer appears to be aPC option on the Mod. I have enabled
USB Debugging on both phones. I am running Win 7 Home Premium 64 Bit.
Both phones when connected via USB show up in Control Panel/system/device manager.
Any help greatly appreciated.
Stransky
(Douglas Barr)
When you connect the phone to the PC pull down the notifications and select USB Connection and then you go to a screen where you can enable disk mode.
Hi all
Thanks for the job done on this forum.
I have a 2016 honda HRV with android radio locked
I would like to root it to install my own apk (not possible for the moment) they use an encrypted HAP as apk and that' the only installation possible (from Hondaappcenter)
the unit ru android 4.0.4
the unit have a chipset Nvidia Tegra T30AGS-Q-A3
more info and pictures on this thread http :// forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
what i could do for the moment :
Open the unit
discover an hidden usb port
connect to pc via that port
install adb + android studio (sdk)
I need to install specific driver with this http :// forum.xda-developers.com /showthread.php?t=1119507
Active USB debug mode (don't stay crossed on each reboot you have to activeted again)
Now i can connect with adb + pc
As you can not use an apk, i try to root it (via windows 7 32 bits) via SRS one click 5.1 But no luck (failed)
retry with oneclick Android one toolkit 1.2.1 but stuck on loading recovery
Anyone have a good idea ?
Have a nice day
Fred
nanddroid said:
Hi all
Thanks for the job done on this forum.
I have a 2016 honda HRV with android radio locked
I would like to root it to install my own apk (not possible for the moment) they use an encrypted HAP as apk and that' the only installation possible (from Hondaappcenter)
the unit ru android 4.0.4
the unit have a chipset Nvidia Tegra T30AGS-Q-A3
more info and pictures on this thread http :// forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
what i could do for the moment :
Open the unit
discover an hidden usb port
connect to pc via that port
install adb + android studio (sdk)
I need to install specific driver with this http :// forum.xda-developers.com /showthread.php?t=1119507
Active USB debug mode (don't stay crossed on each reboot you have to activeted again)
Now i can connect with adb + pc
As you can not use an apk, i try to root it (via windows 7 32 bits) via SRS one click 5.1 But no luck (failed)
retry with oneclick Android one toolkit 1.2.1 but stuck on loading recovery
Anyone have a good idea ?
Have a nice day
Fred
Click to expand...
Click to collapse
Hi Fred,
The purpose of XDA Assist is to help newbies navigate the site.
It looks like you found a good thread for support here: http://forum.xda-developers.com/android/help/heard-2016-honda-pilot-android-based-t3141346/page9
For discussion about android head units you can also check out this section: Android auto.
Good luck
Art Vanderlay
XDA Assist
Hello Specialists!!
I have an really big problem with my phone: "SM-J700F"
I am not able to connect via odin or kies to this one.
But in windowes explorer (Win7 64bit) everything is visible.
In MTP Mode, Usb-Storage and PTP mode.
Also I can acess to the phone via the explorer.
But not with odin and/or Kies.
I tried to installit several times (Kies also Kies3)
Then I tried another win7 computer, but with same result.
The reason is, i wont to root the phone, because of low memory, even after reseting to factory.
I hope really a lot that there is an solution!!!!
Many greetings
Robert
Additional information odin
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
hook02 said:
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
Click to expand...
Click to collapse
Hello, Please what I should try?
BR
Robert
Try this maybe this would help yah connecting thru odin... settings > developers option > able OEM unlock
---------- Post added at 07:38 AM ---------- Previous post was at 07:33 AM ----------
Rooting J7, download a compatible twrp n superuser zip file on XDA, and place the superuser in yur device, then flash twrp via Odin( wait 2 to 4 minutes then Pass appears n yur phone reboots) then go to recovery mode then install superuser.zip
I don't know - not working at all
Hello!
Thanks for supoort!
Yes, I tried always: developer options on and OEM unlock. (on 2 Computers with win7)
But there is on both no entity below ID:COM in odin.
So there is no nonnection... (also in windows, when phone is normal connected (not via download mode) there is no connection from ODIN and KIES)
Bute another phone Galaxy S5 Neo is working.
Shi.....
Many thanks for support!!!!!!!!!!
BR
Hook
Can anybody support me
Hello
Is any possibility for helping?
BR
Robert
Some News
Hello!
What I found out:
When I use *#0808#
There is SP selected and RNDIS+ACM+DM+ADB
Bit when I select MTP+ADB the other one is not deselected and I cannot continue?
Means with OK - no function and Reboot - no function (then both are selected....!)
Do you can support me here?
BR
Hook
Redmi note 5 pro(miui 10 stable) connection to computer is success but show empty folder
Solution -Last night i tried to install new theme editor of miui 10 in Computer allowing usb debugging & than connection made however they install "show app" in mobile automatically ;security center show that this app is viruse, i just ignore warning & allowed install but connection was not succeed after many tried.. I just uninstall everything Later i just connect ph to pc but this problem happend - ph connected but folder show emptyI
tried -
1 install usb adb driver - nothing happened
2 qualcomm driver nothing happend
3 mannuly install drives - nothing happend
Finally?
4 i run miui sequrity app(already installed by miui in every phone) & run full scan (defenation-tencent)They closed devlover & problem solved
Now computer connected working fine..
So guys if u have same issue try that last step only (becuse window pc has already mtp driver this is happening by ph not by pc so don't waste ur time in finding drivers?)
(if u changed driver in pc? so just do- device manager-portable device-android(or wahtever named shows) - upadte driver-browse computer-let me pic-UNIVERSAL USB BUS DRIVER-MTP..) Ok .. Yoo?
I've downloaded the ISO for Bliss OS 11.13 (64bit for Intel Atom processor), created a Live USB using Rufus on Win10 and am trying to figure out how to install it to the my Dell Venue 8 7840 (running Android 5.1, unlocked and rooted). But the installer doesn't recognize there's an android tablet connected via usb.
I've ensured that the my Dell Venue 8 7840 (unlocked, rooted running Android 5.1) has both the MTP Dell drivers as well as the ADB drivers in Windows 10 and I can launch a terminal and run typical ADB/Fastboot commands and the device responds.
I've tried using all of the available "Allwinner" usb tools (PhoenixSuit, Phoenix USB Pro and LiveSuit) but none of these will accept the iso file I've downloaded directly from the Bliss OS site. Am I doing something wrong? My tablet isn't supported by CWM/TWRP or any of the major custom ROMS (LineageOS etc) so I can't update passed the current Android 5.1 as Dell no longer manufactures Android tablets.
Please tell me if anyone has been able to successfully install Bliss OS on an Intel Atom based Android tablet
Thanks
any update on this?