Hello Specialists!!
I have an really big problem with my phone: "SM-J700F"
I am not able to connect via odin or kies to this one.
But in windowes explorer (Win7 64bit) everything is visible.
In MTP Mode, Usb-Storage and PTP mode.
Also I can acess to the phone via the explorer.
But not with odin and/or Kies.
I tried to installit several times (Kies also Kies3)
Then I tried another win7 computer, but with same result.
The reason is, i wont to root the phone, because of low memory, even after reseting to factory.
I hope really a lot that there is an solution!!!!
Many greetings
Robert
Additional information odin
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
hook02 said:
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
Click to expand...
Click to collapse
Hello, Please what I should try?
BR
Robert
Try this maybe this would help yah connecting thru odin... settings > developers option > able OEM unlock
---------- Post added at 07:38 AM ---------- Previous post was at 07:33 AM ----------
Rooting J7, download a compatible twrp n superuser zip file on XDA, and place the superuser in yur device, then flash twrp via Odin( wait 2 to 4 minutes then Pass appears n yur phone reboots) then go to recovery mode then install superuser.zip
I don't know - not working at all
Hello!
Thanks for supoort!
Yes, I tried always: developer options on and OEM unlock. (on 2 Computers with win7)
But there is on both no entity below ID:COM in odin.
So there is no nonnection... (also in windows, when phone is normal connected (not via download mode) there is no connection from ODIN and KIES)
Bute another phone Galaxy S5 Neo is working.
Shi.....
Many thanks for support!!!!!!!!!!
BR
Hook
Can anybody support me
Hello
Is any possibility for helping?
BR
Robert
Some News
Hello!
What I found out:
When I use *#0808#
There is SP selected and RNDIS+ACM+DM+ADB
Bit when I select MTP+ADB the other one is not deselected and I cannot continue?
Means with OK - no function and Reboot - no function (then both are selected....!)
Do you can support me here?
BR
Hook
Related
Hi all,
My samsung gt 15801 is not detected in eclipse but the same time it is detected in samsung kies.I setted following in my device
enabled the debugging mode
set usb settings ---> through samsung kies
disable usb storage
One more question how can i connect it in linux........????? (All I want is some how used that device for Android application testing )
Thanks for your time
Try killing all processes related to kies
Try out the steps given in 1st post on the page below..worked for me.
http://forum.xda-developers.com/showthread.php?t=778880&page=53
I have already hooked up mass storage to the nexus 4. I checked usb debugging and MTP on both devices also checked OTG box in synapses for the nexus 4. Next if possible I want to hook 2 devices up through an OTG power Y cable and push and pull files with ADB essentially taking out the PC for when I mess up and have to flash a new OS. (I have access to a PC just bored looking for a different way)
The first device is a rooted nexus 4.
ROM: dirty unicorns v9.1 android 5.0.2
Kernel version: 3.4.106-hells-doctor-FrAndroid
The second device is a Samsung galaxy tab pro
Stock android OS KitKat v4.4
When I think Samsung is the host the nexus 4 shows up as a keyboard and mouse. How can I make the Samsung recognize the nexus 4 as a device??
When I switch the cables around the Samsung notification shows a media device connected but I can't find it. The Nexus 4 notification shows USB Debugging with the little monster. This is a learning process for me so if I forgot any vital info please let me know so I can quickly update. Thanks for the help and guidance.
Hi Guys,
- I have Samsung S7 (SM-G930F) with broken screen (full black), so the only solution to recover files is to enable debugging then use software
- I can only see small blue light from down the screen on the 2 buttons
- SO, what i did is:
- Downloaded firmware for the device (first i downloaded a version that doenst belong to my country, just a version i found)
- I extracted the file (it had 4 files inside it with names start with , AP, BL, CP, CSC)
- Then used ADB File Automator (it converted the files and added one starts with HOME also)
- I managed to put phone on Download mode
- Then used ODino to flush "AP", i uploaded the files starts with AP to the AP section
- after that it showed me that it PASSED
- after that the phone doesnt turn on or actually doesnt boot because i can put it again on download mode but when i turn it of and on while its plugged on the PC i can tell that its not booting because i dont her the computer recognize it.
- Could the first version i downloaded bricked the phone ? even though it says that it passed !!
or what do you guys thought it went wrong ?
source of tutorial
Enable USB debugging on Download Mode /Without going to settings (Samsung) from ALBVIRAL website
Regards
msaithan said:
Hi Guys, I have Samsung S7 (SM-G930F) with broken screen (full black), so the only solution to recover files is to enable debugging then use software...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3341138
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Redmi note 5 pro(miui 10 stable) connection to computer is success but show empty folder
Solution -Last night i tried to install new theme editor of miui 10 in Computer allowing usb debugging & than connection made however they install "show app" in mobile automatically ;security center show that this app is viruse, i just ignore warning & allowed install but connection was not succeed after many tried.. I just uninstall everything Later i just connect ph to pc but this problem happend - ph connected but folder show emptyI
tried -
1 install usb adb driver - nothing happened
2 qualcomm driver nothing happend
3 mannuly install drives - nothing happend
Finally?
4 i run miui sequrity app(already installed by miui in every phone) & run full scan (defenation-tencent)They closed devlover & problem solved
Now computer connected working fine..
So guys if u have same issue try that last step only (becuse window pc has already mtp driver this is happening by ph not by pc so don't waste ur time in finding drivers?)
(if u changed driver in pc? so just do- device manager-portable device-android(or wahtever named shows) - upadte driver-browse computer-let me pic-UNIVERSAL USB BUS DRIVER-MTP..) Ok .. Yoo?
How to Fix No Update Available While New One Logged on Website with All Samsung DevicesHi there! This is my second guide on XDA developers, and now about fixing something. I have a Samsung Galaxy A12 with the model number SM-A127F, which wasn't able to find the Android 12/OneUI 4.1 update for this device that was listed on the Samsung notify website. And not so long ago, Samsung also released the Android 13/OneUI 5.0 update for this device. This guide is for if you have any problems finding updates using the device's built-in software update service (OTA) on your Samsung device.
Prerequisites- A Samsung device running Android 4.3 or higher
- A computer running Windows 7/8(.1)/10/11 or MacOS (X)
- An USB-C to USB-A adapter, micro-USB to USB-A adapter or any other cable that is supported by the Samsung device and computer
Method #1: Find and install update using Samsung Smart Switch1. Power your device on if it isn't.
2. Download Samsung Smart Switch from here. Choose 'WINDOWS' for a Windows PC, and choose 'MAC OS' for a Mac computer.
3. Run the installer and follow the steps to install Samsung Smart Switch.
4. Open Samsung Smart Switch on your computer.
5. Connect your phone using the charging cable or any other USB-C to USB-A cable to the Windows or Mac computer.
6. Turn your device's screen on and unlock it if needed.
7. Install the Smart Switch app on your Samsung phone.
8. Click on 'software update' or 'update' if there is a button.
9. If an update is available, you'll get a prompt with the update info askin to install it.
10. Click on 'install'.
11. Wait some time until the update is completed.
And done! You should now have the latest software update on your device. This also solved my problem to not find updates, where feature updates were found again.
Minionguyjpro said:
How to Fix No Update Available While New One Logged on Website with All Samsung DevicesHi there! This is my second guide on XDA developers, and now about fixing something. I have a Samsung Galaxy A12 with the model number SM-A127F, which wasn't able to find the Android 12/OneUI 4.1 update for this device that was listed on the Samsung notify website. And not so long ago, Samsung also released the Android 13/OneUI 5.0 update for this device. This guide is for if you have any problems finding updates using the device's built-in software update service (OTA) on your Samsung device.
Prerequisites- A Samsung device running Android 4.3 or higher
- A computer running Windows 7/8(.1)/10/11 or MacOS (X)
- An USB-C to USB-A adapter, micro-USB to USB-A adapter or any other cable that is supported by the Samsung device and computer
Method #1: Find and install update using Samsung Smart Switch1. Power your device on if it isn't.
2. Download Samsung Smart Switch from here. Choose 'WINDOWS' for a Windows PC, and choose 'MAC OS' for a Mac computer.
3. Run the installer and follow the steps to install Samsung Smart Switch.
4. Open Samsung Smart Switch on your computer.
5. Connect your phone using the charging cable or any other USB-C to USB-A cable to the Windows or Mac computer.
6. Turn your device's screen on and unlock it if needed.
7. Install the Smart Switch app on your Samsung phone.
8. Click on 'software update' or 'update' if there is a button.
9. If an update is available, you'll get a prompt with the update info askin to install it.
10. Click on 'install'.
11. Wait some time until the update is completed.
And done! You should now have the latest software update on your device. This also solved my problem to not find updates, where feature updates were found again.
Click to expand...
Click to collapse
Thanks for moving this thread, so now it is easier to find.
TheWorldYT said:
Thanks for moving this thread, so now it is easier to find.
Click to expand...
Click to collapse
Indeed!