I'm using the latest rom CM9[04.04.12] but it seems that I can't access data connection. I lived in the Philippines. I flashed sbf first before upgrading, Russian version. After installing updates including baseband [Russian version also], no luck with 3G, Edge, etc.
Note:
I brought my phone (Milestone XT720) in Dubai, UAE. I haven't got the chance to check the ORIGINAL SBF before upgrading. Now I always use the Russian version everytime I update and have the same Problem
Anyone can help me about this problem?
One thing I'm not sure I understand is if you're saying (a) it used to work with the Russian sbf and it recently stopped working specifically on CM9 or (b) it used to work in the original sbf but it hasn't worked for any rom since flashing the Russian sbf? i.e. have you isolated the problem to the sbf or to CM9?
You may be able to figure out what your original sbf was from markings. At least on mine, the sticker behind the battery gives a clue which sbf went originally. Compare the build numbers listed here with your sticker http://droid-developers.org/wiki/SBF:XT720 For example, mine says "STR_U2_04.1E.1" -- which could be either the Cincinnati Bell or Brightpoint ROMs (the differences between CBW and Brightpoint ROMs are trivial).
I meant eversince I upgraded my Rom. Back to my original stock, it used to work fine. I can't find any sticker at the back of the battery that says something like yours.
I'm sorry for such trouble. I really appreciate your help.
Does anyone know of any working Telecom NZ working ROMs? Stock won't flash and I'm stuck with a soft bricked Atrix 2.
System.img has an incorrectly permissioned build.prop and no system.img's will flash.
Webtop (grfs.img) is flashing wrong and creating the Invalivd CG OTV and CG Version errors.
I want to find a working (custom rom) that will hopefully work on my telecom atrix.
Any takers?
Hey mate,
williamguy said:
Does anyone know of any working Telecom NZ working ROMs? Stock won't flash and I'm stuck with a soft bricked Atrix 2.
Click to expand...
Click to collapse
Here's a link to a TNZ ROM: http://sbf.droid-developers.org/edison/5.5.1-EDEM-28-TNZ_cfc.xml.zip - haven't tried this one tho.
I had softbricked my TNZ atrix 2 recently and this rom worked perfectly for me: http://sbf.droid-developers.org/edison/6.7.2_EDEM-18-MEARET_cfc.xml.zip. From there I Installed the JB Leak one which I currently use. For some strange reason, it would not boot up completely without installing the MEARET ROM beforehand.
Just in case - I have been using RSD Lite 6.15 for all my flashing needs (https://www.dropbox.com/s/2y92rn0xkeeuc36/RSDLite6.1.5.zip)
Cheers
Another fine ROM For other variant of Galaxy S 4 - Korean Version (SHV-E300S), this rom is provided by Samsung-Updates.com, and thanks for the Sammobile who first found this release
Latest:
Device: SHV-E300S (Galaxy S 4 - Korean)
Region: SKT (Korea)
Android: 4.2.2 (Jelly Bean)
ChangeList: 507268
Build Date: 19.04.2013
PDA: E300SKSUAMDK
CSC: E300SSKTAMDK
MODEM: E300SKSUAMDI
Download Firmware (E300SKSUAMDK, SKT) Here
Download Kernel (E300SKSUAMDK, SKT) Only
Download Odin 3.07 (Flashing Program) Here
You will be able to get all the versions as soon as Samsung releases it at: SHV-E300S Firmware Repository Page from Samsung-Updates.com
Enjoy!
AL
PS: This download is powered by Samsung-Updates.com , Sammobile and Samsung's KIES !
Unfortunately I bought a SHV-E300S (32GB).
AT&T and T-Mobile puts this phone on the GPRS slow lane.
this i shv-300s )
SKT Hidden Menu helped me. I'm on T-Mobile 3G now.
T-Mo is bring their 4G network online today. Maybe.....4G for the SHV-E300S is coming.
soundping said:
SKT Hidden Menu helped me. I'm on T-Mobile 3G now.
T-Mo is bring their 4G network online today. Maybe.....4G for the SHV-E300S is coming.
Click to expand...
Click to collapse
Hey there, how did you get the shv e300s imported to you? I am in the UK and I cant seem to find anyone importing the phone here. How did you get yours? Thanks for your help
I bought mine from ebay. It came from S. Korea factory unlocked and preset to english.
Looks like the seller isn't selling this model now.
video call
soundping said:
I bought mine from ebay. It came from S. Korea factory unlocked and preset to english.
Looks like the seller isn't selling this model now.
Click to expand...
Click to collapse
I also bought this 1. the problem is that I can't make normal video call.
when I press video call, it says "video call is not supported in international roaming area"...
the same sim used on my s2 was ok before.
any chance to get custom rom to fix this?
plz help....
how can i factory unlock my SHV-300S and remove all the bloatware? Can i uninstall them all?? I am a noob,help please!
avishaan said:
how can i factory unlock my SHV-300S and remove all the bloatware? Can i uninstall them all?? I am a noob,help please!
Click to expand...
Click to collapse
Where did you get your SHV-300S ? if you imported in then it should be automatically factory unlocked.. Also if you wanna remove the bloatware use this app Link2SD and by the way be carfeful what you remove as you can brick your device just make a full rom backup and save it some where before you proceed.....
N1NJATH3ORY said:
Where did you get your SHV-300S ? if you imported in then it should be automatically factory unlocked.. Also if you wanna remove the bloatware use this app Link2SD and by the way be carfeful what you remove as you can brick your device just make a full rom backup and save it some where before you proceed.....
Click to expand...
Click to collapse
Look.. I got my mobile from china,it showed on the model number that it was GT-I9505,it was already factory unlocked,i wanted to remove chinese bloatware by downloading another firmware,but when i got on the download mode,it showed korean language and showed that it was shv-e300s. then i had to download korean firmware because the mobile did not go past the samsung logo. after flashing,it was fine,but there are loads of korean bloatware,atleast 15
it is also factory locked,and there is the SK telecom boot animation that shows when restarting or shutting down,i would like to remove this also and replace it with the official samsung logo.
how to factory unlocked? i have rooted the phone already.
avishaan said:
Look.. I got my mobile from china,it showed on the model number that it was GT-I9505,it was already factory unlocked,i wanted to remove chinese bloatware by downloading another firmware,but when i got on the download mode,it showed korean language and showed that it was shv-e300s. then i had to download korean firmware because the mobile did not go past the samsung logo. after flashing,it was fine,but there are loads of korean bloatware,atleast 15
it is also factory locked,and there is the SK telecom boot animation that shows when restarting or shutting down,i would like to remove this also and replace it with the official samsung logo.
how to factory unlocked? i have rooted the phone already.
Click to expand...
Click to collapse
i got the same model as you, its got the same boot up screen as you the SK Telecom full hd.. But mines factory unlocked ??? Also im pretty sure you dont have to flash the kernel if you am flashing a rom, i could be wrong. here try this post it got everything you need for your e300s http://forum.xda-developers.com/showthread.php?t=2284543
New xda user SOS!!
Hi, do you have a link that has the E300S Firmware,Kernel and Odin for flashing i.e. E300SKSANMH3_E300SSKTMHK3_SKT zip file .with a faster file transfer rate coz sammobile's terafile link is downloading at 10kbps it will take me 3 days to download it. I need help. Thanks.
hi tried to install Paranoid Android forgot to wipe cache and check the kernel version (i started on ics so it should be right) can't boot Paranoid Android just through ok reflash via RSD Lite download the Telecom New Zealand file and flashed it and can't get past the 7/21 flash cdt.bin tryed many files (e.g. 5.5.1-EDEM-27-SEARET and 6.7.2-EDEM-18-MEARET and 5.5.1-EDEM-28-TNZ) after that downloading the Jelly Bean file now (5.5.1-EDEM-28-37-SEARET i believe) i'll have to see if theirs a 5.5.1 MEARET anyway i feel the problem is because i had to install clockworkmod to install Paranoid or the Paranoid installed its own Recovery and in reading about the Paranoid Recovery it said's i needed to install BMM great please help
Phone model (Retail India, Retail China or AT&T) & have you flashed other than retail firmware (aka. AT&T)?
Don't worry it can be fixed.
You've hit the problem that many of us NZ users have had. For some reason RSD Lite just doesn't work on the Telecom NZ phones. (Although some users say it worked for them)>
Try this thread. 3rd post down.
Another thread here
turffe said:
Phone model (Retail India, Retail China or AT&T) & have you flashed other than retail firmware (aka. AT&T)?
Click to expand...
Click to collapse
MB865 and its a Telecom New Zealand Phone but i could try it do u know if running "fastboot devices" should came up with anything because it don't ?
gilda311 said:
Don't worry it can be fixed.
You've hit the problem that many of us NZ users have had. For some reason RSD Lite just doesn't work on the Telecom NZ phones. (Although some users say it worked for them)>
Try this thread. 3rd post down.
Another thread here
Click to expand...
Click to collapse
ok you need a special moto fastboot that worked great thanks a lot
mitchell985 said:
ok you need a special moto fastboot that worked great thanks a lot
Click to expand...
Click to collapse
once you've got ICS running OK you can get root, install BMM and start installing custom ROMs
I'm am looking for an alternative download link for the firmware mention here:
http://forum.xda-developers.com/showpost.php?p=51668378&postcount=204
Title: Android 4.4 - Blur_Version.176.44.1.falcon_cdma.USC.en.US (Boost US) (CDMA Only!)
Filename: USC_XT1031_4.4.2_KXB20.9-1.10-1.9_CFC_1FF.xml.zip
Having trouble with the FileFactory download. Have tried downloading multiple times from different machines and it never completes. Anybody with a copy of this firmware that could provide a link I would be much appreciated. Need it to fix my only phone.