[Q] Moto G XT1031 USCC Firmware - Moto G Q&A, Help & Troubleshooting

I'm am looking for an alternative download link for the firmware mention here:
http://forum.xda-developers.com/showpost.php?p=51668378&postcount=204
Title: Android 4.4 - Blur_Version.176.44.1.falcon_cdma.USC.en.US (Boost US) (CDMA Only!)
Filename: USC_XT1031_4.4.2_KXB20.9-1.10-1.9_CFC_1FF.xml.zip
Having trouble with the FileFactory download. Have tried downloading multiple times from different machines and it never completes. Anybody with a copy of this firmware that could provide a link I would be much appreciated. Need it to fix my only phone.

Related

[Q] Official O2 branded firmware for S2 ?

Hi,
I am searching for latest O2 branded firmware but as Multiupload and other hosting sites are down now. Can someone please help me to get this latest firmware. Kies in my computer also shows me a new firmware but when I update with Kies, it does all the process of downloading and installing but after the 100% completion it reaches back to the same state showing a newer version is available.
I will be grateful for any help either by giving me any link to download the latest branded firmware of o2 or to help solving Kies problem.
p.s. I have tried samfirmware.com and also Check Fus but those firmwares are corrupted and they stuck in the middle of installation.
This is a version RC1. In March would officially
http://www.sammobile.com/
Thank you Seryeo but as I mentioned in my previous post that the firmware which is available at SamMobile is perhaps corrupted as when I run it at Odin it stucks in the middle and then I have to flash my mobile again with the older firmware otherwise my mobile stops working.

[Q] Official Branded firmware download problem

Hi,
I am searching for latest O2 branded firmware but as Multiupload and other hosting sites are down now. How can I get the latest firmware. Kies in my computer also shows me a new firmware but when I update with Kies, it does all the process of downloading and installing but after the 100% completion it reaches back to the same state showing a newer version is available.
I will be grateful for any help either by giving me any link to download the latest branded firmware of o2 or to help solving Kies problem.
p.s. I have tried samfirmware.com and also CheckFus but those firmwares are corrupted and they stuck in the middle of installation.
Thanks

Atrix 2 Telecom New Zealand SBF required

Can someone please upload the below described SBF for Motorola Atrix 2 MB865, since http://sbf.droid-developers.org is no longer alive, and I am not able to download the same from http://web.archive.org/web/20120522053745/http://sbf.droid-developers.org/edison/list.php, as the download always fails in the middle.
Filename: 5.5.1-EDEM-28-TNZ_cfc.xml.zip
MD5: 9A3EC3BB5E48338C68551C8CAA1C9CA3
Carrier: Telecom New Zealand
Never mind, after several attempts the download completed successfully.

Flashing Carrier Specific ROM's for Galaxy S7 / S7 Edge US UNLOCKED [SM-G930U/ G935U]

Hello Everyone,
This is a Guide to Flashing Carrier Specific official ROM's for SAMSUNG GALAXY S7/ S7 EDGE [SM-G930U] [SM_G935U]
Since 5 months as a owner of this device, i was furious to samsung as they have forgoten about this model and never released a security update and still haven't released update for Nougat.
As, all the carrier specific models have been already updated to nougat and stable. I suggest to everyone who is having these models to Flash their carrier specific firmware.
1) First, when deciding which carrier ROM to flash, you need to know who is your provider. You might be using the Big four carriers like AT&T, T Mobile, Verizon, Sprint, which is a pretty straight forward answer.
But, like me there must be several other who like to use prepaid carriers to get best value for money. I use H20 and the network provider is AT&T, which means i must flash AT&T ROM.
In order to find out, which network provider your carrier uses, go to this below link and find the name of your carrier.
https://en.wikipedia.org/wiki/List_of_United_States_mobile_virtual_network_operators
2) After defining which carrier firmware you need, download them from below links.
S7:
AT&T Firmware - G930AUCS4BQC2 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7977
T mobile Firmware - G930TUVS4BQC1 - http://gsm-firmware.com/index.php?a=browse&b=category&id=6953
Sprint Firmware - G930PVPU4BQAA - http://gsm-firmware.com/index.php?a=browse&b=category&id=6410
Verizon Firmware - G930VVRU4BQA4 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7209
S7 EDGE
AT&T Firmware - G935AUCS4BQC2 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7351
T mobile Firmware - G935TUVS4BQC1 - http://gsm-firmware.com/index.php?a=browse&b=category&id=6954
Sprint Firmware - G935PVPU4BQAA - http://gsm-firmware.com/index.php?a=browse&b=category&id=6411
Verizon Firmware - G935VVRU4BQA4 -http://gsm-firmware.com/index.php?a=browse&b=category&id=7208
and any us cellular carriers
S7 - G930R4TYU4BQC5 - sorry, i could not find the link for official firmware which are faster, you can download from sammobile which is very slow - https://www.sammobile.com/firmwares/galaxy-s7/SM-G930R4/USC/download/G930R4TYU4BQC5/128660/
S7 EDGE- G935R4TYU4BQC5 - http://gsm-firmware.com/index.php?a=browse&b=category&id=8492
3) In the above links, download four files named AP,BL,CP,CSC.
Now, cut these four files and copy them into a separate folder.
Next, download a file extractor, i suggest you to download 7 zip HERE http://www.7-zip.org/
Install it and then extract each file into the same folder.here you must be having four .tar.md5 files.
4) Now install odin, just download this specific version which works, only with the unlocked model. https://www.4shared.com/s/fBjP73CGjei
The method on how to use odin to flash, you must learn here, if yoou dont know how! http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
If you knew proceed. Rember: Download the Odin from the above link, its a must or else if you use any other version, it won't flash and your device will be factory reset.
Voila, Now you will be having Nougat on your carrier rom.
Benifits:
Samsung Pass
Samsung Cloud
New UI
New phone dialer
and lots of other things
Sm-g935u
vivekvarma02 said:
Hello Everyone,
This is a Guide to Flashing Carrier Specific official ROM's for SAMSUNG GALAXY S7/ S7 EDGE [SM-G930U] [SM_G935U]
Since 5 months as a owner of this device, i was furious to samsung as they have forgoten about this model and never released a security update and still haven't released update for Nougat.
As, all the carrier specific models have been already updated to nougat and stable. I suggest to everyone who is having these models to Flash their carrier specific firmware.
1) First, when deciding which carrier ROM to flash, you need to know who is your provider. You might be using the Big four carriers like AT&T, T Mobile, Verizon, Sprint, which is a pretty straight forward answer.
But, like me there must be several other who like to use prepaid carriers to get best value for money. I use H20 and the network provider is AT&T, which means i must flash AT&T ROM.
In order to find out, which network provider your carrier uses, go to this below link and find the name of your carrier.
https://en.wikipedia.org/wiki/List_of_United_States_mobile_virtual_network_operators
2) After defining which carrier firmware you need, download them from below links.
S7:
AT&T Firmware - G930AUCS4BQC2 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7977
T mobile Firmware - G930TUVS4BQC1 - http://gsm-firmware.com/index.php?a=browse&b=category&id=6953
Sprint Firmware - G930PVPU4BQAA - http://gsm-firmware.com/index.php?a=browse&b=category&id=6410
Verizon Firmware - G930VVRU4BQA4 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7209
S7 EDGE
AT&T Firmware - G935AUCS4BQC2 - http://gsm-firmware.com/index.php?a=browse&b=category&id=7351
T mobile Firmware - G935TUVS4BQC1 - http://gsm-firmware.com/index.php?a=browse&b=category&id=6954
Sprint Firmware - G935PVPU4BQAA - http://gsm-firmware.com/index.php?a=browse&b=category&id=6411
Verizon Firmware - G935VVRU4BQA4 -http://gsm-firmware.com/index.php?a=browse&b=category&id=7208
and any us cellular carriers
S7 - G930R4TYU4BQC5 - sorry, i could not find the link for official firmware which are faster, you can download from sammobile which is very slow - https://www.sammobile.com/firmwares/galaxy-s7/SM-G930R4/USC/download/G930R4TYU4BQC5/128660/
S7 EDGE- G935R4TYU4BQC5 - http://gsm-firmware.com/index.php?a=browse&b=category&id=8492
3) In the above links, download four files named AP,BL,CP,CSC.
Now, cut these four files and copy them into a separate folder.
Next, download a file extractor, i suggest you to download 7 zip HERE http://www.7-zip.org/
Install it and then extract each file into the same folder.here you must be having four .tar.md5 files.
4) Now install odin, just download this specific version which works, only with the unlocked model. https://www.4shared.com/s/fBjP73CGjei
The method on how to use odin to flash, you must learn here, if yoou dont know how! http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
If you knew proceed. Rember: Download the Odin from the above link, its a must or else if you use any other version, it won't flash and your device will be factory reset.
Voila, Now you will be having Nougat on your carrier rom.
Benifits:
Samsung Pass
Samsung Cloud
New UI
New phone dialer
and lots of other things
Click to expand...
Click to collapse
But still no U Nougat right?
Yes, Still no nougat. I think this has been an operation by carriers not to release any update untill all of them have updated, so that people who bought these models won't buy again and only buy from them next time.
G935uueu4bqd2
7.0
Seems to me that the 4share does anything but actually download ODIN and I always get a mismatch/fail.
I find a legitimate ODIN download site and it fails. DO NOT FOLLOW THESE INSTRUCTIONS.

I need a help for an old phone LG G4 H815 (made in Korea)

I bought an used lg g4 H815 with someone. After sometimes I realised that it stucks and does bootloops. Then I decide to flash it according to websites which host firmwares for downloads. But, after that, It says "current version is not available for user. Cant find matched cust for NT-code mcc, mcc, subset". Now the network doesnt work on it. I'm a newbie and in spite of my reasearch I cant do anything to solve it. I flashed an european rom, android 5.1 according to my model. The first time I flashed it, in download mode I saw there were only words written in Korean.
Please I need your help. Dont ignore!

Categories

Resources