Hello,
I have a xperia z3 with breaking the screen so I decided to change the only way I'm used to change screens ...
result I have the screen that displays the backlight but no picture ...
I decide to recommend a new screen but still the same problem!
sorry for my English :/
Are u sure the replacement display is not faulty?
And in the thread title you are tellinf its not getting signal.. U r little confusing.
Related
hey i think i hav a serious problem my touchpad is damaged or the screen has moved from its allignment theres a patch developed on ma screen which consists of small bubbles..
donno wats d problem but m desperate to install the new 2.03 rom so please experts can u all help me out wid this..
jus lemme know d solution...
please thanks alot..
to all of u..
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
i also have the same issue...do anybody know how to fix this??...
hey ppl my biggest problem is my alliginin screen doesnt get over only...it goes on n on...
its dam irritatin..
hey
rogalxxx said:
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
Click to expand...
Click to collapse
i had that problem too after change my covers.. but after 2 days its ok.. don't know what happened.. i read that if you clean the display with the Cloth of cleaning sunglasses with A bit of strength myabe it works..
also check this Touchscreen Calibration Data
hope it helps...
see ya..
i am very new to these things .. noob .. i hv got my hands on qtek 9000 and i plan on upgrading it to wm6 my device info is
R 1.03.00
G 42.36.p8
D 1.13.64 wwe
i request for a poll please.. to make it easy for me to decide ... i went thru wiki and i hv nearly understood how to flash my ppc.. bt i m stilling having jitters if i might mistakely brick my ppc..so help me in choosing the best rom for my ppc
p.s my ppc lcd panel is little loose .. my cousin is sure that the fault is in its ribbon the thing lcd is standing on ? when i rotate my screen it goes white bt then when i press power button two times it comes back again and colors are bit out too.. is their any one else facing this problem my ppc is roughly used ! coz of that lcd ribbon is damaged i presume ...i hv been ripped off ..bt their is nuthin i cod do except get it fixed
guide me if i am asking questions in wrong section !
thank you
mdakait said:
i am very new to these things .. noob .. i hv got my hands on qtek 9000 and i plan on upgrading it to wm6 my device info is
R 1.03.00
G 42.36.p8
D 1.13.64 wwe
i request for a poll please.. to make it easy for me to decide ... i went thru wiki and i hv nearly understood how to flash my ppc.. bt i m stilling having jitters if i might mistakely brick my ppc..so help me in choosing the best rom for my ppc
p.s my ppc lcd panel is little loose .. my cousin is sure that the fault is in its ribbon the thing lcd is standing on ? when i rotate my screen it goes white bt then when i press power button two times it comes back again and colors are bit out too.. is their any one else facing this problem my ppc is roughly used ! coz of that lcd ribbon is damaged i presume ...i hv been ripped off ..bt their is nuthin i cod do except get it fixed
guide me if i am asking questions in wrong section !
thank you
Click to expand...
Click to collapse
so long as you are sensible you shouldnt harm your device by flashing, so my suggestion is to try all the most recent ones to find one to your liking.
With regards to the white screen, my Universal also had this problem and it was the LCD ribbon.
Midget_1990 said:
so long as you are sensible you shouldnt harm your device by flashing, so my suggestion is to try all the most recent ones to find one to your liking.
With regards to the white screen, my Universal also had this problem and it was the LCD ribbon.
Click to expand...
Click to collapse
i was feeling i wont b helped here... thanks for replying ...
so ur lcd had the same problem how did u gt yr ribbon fixed ?
Hi guys.
I broke my touchscreen.
So I bought a new one but after changing, all four lower BUTTONS do not work and I can't access to the status bar... IN fact the top and bottom of the screen doesn't respond.
The rest of the screen seems to work normally.
Any help ? Thanks
p.s: sorry for bad english.
Beda974 said:
Hi guys.
I broke my touchscreen.
So I bought a new one but after changing, all four lower BUTTONS do not work and I can't access to the status bar... IN fact the top and bottom of the screen doesn't respond.
The rest of the screen seems to work normally.
Any help ? Thanks
p.s: sorry for bad english.
Click to expand...
Click to collapse
U replaced screen from htc?????
Sent from my HTC Explorer A310e using xda premium
No I bought and changed this : http://cgi.ebay.fr/ws/eBayISAPI.dll...X:IT&_trksid=p3984.m1497.l2649#ht_1788wt_1129
open it an try to carefully reinsert touch connector.
if you don't know what to do then watch this and at 1:18 you'll see the conector. the big one.
Maybe it's the touchscreen who is defected ?
Cause I've reinsert so many time this connector...
But it's really wierd cause I can scroll the screen...
Can we recalibrate the touchscreen of our pico ?
Question : What do this part do ? http://cgi.ebay.fr/Original-HTC-Exp..._Werkzeuge&hash=item25731b683b#ht_2524wt_1140
Just LED or anything else ?
Hello everyone, I have a problem with the screen, a long time ago a printer tonner hit my screen, it's started to show wrong resolution (no hd) so I send it to change the part that has the problem. They change it and the screen never light up, the phone turn on, the touch screen work perfectly, the sound, all the buttoms but the screen it's black... Only I can see it with airdroid... Someno know what it's happening?. Obviously they doens't charge me the work. I'm from Argentina and the model is C2105, I send the phone to my brother in Spain and there couldn't make it work.
Never gave me an answer
Ferdesor said:
Never gave me an answer
Click to expand...
Click to collapse
Maybe no one here had any solution for this issue, because it is a hardware problem, so no one can help in software manner.
Maybe but this thread it's for all the problems I think.
HI
My Xperia z3 battery has been swealed and since that happened touch screen in the middle of the screen is not working properly.
Is it because of the pressure that the battery is putting on the screen and will replacing the battery fix it or not?
Thanks
Sorry for my bad English