hey i think i hav a serious problem my touchpad is damaged or the screen has moved from its allignment theres a patch developed on ma screen which consists of small bubbles..
donno wats d problem but m desperate to install the new 2.03 rom so please experts can u all help me out wid this..
jus lemme know d solution...
please thanks alot..
to all of u..
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
i also have the same issue...do anybody know how to fix this??...
hey ppl my biggest problem is my alliginin screen doesnt get over only...it goes on n on...
its dam irritatin..
hey
rogalxxx said:
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
Click to expand...
Click to collapse
i had that problem too after change my covers.. but after 2 days its ok.. don't know what happened.. i read that if you clean the display with the Cloth of cleaning sunglasses with A bit of strength myabe it works..
also check this Touchscreen Calibration Data
hope it helps...
see ya..
Related
i am very new to these things .. noob .. i hv got my hands on qtek 9000 and i plan on upgrading it to wm6 my device info is
R 1.03.00
G 42.36.p8
D 1.13.64 wwe
i request for a poll please.. to make it easy for me to decide ... i went thru wiki and i hv nearly understood how to flash my ppc.. bt i m stilling having jitters if i might mistakely brick my ppc..so help me in choosing the best rom for my ppc
p.s my ppc lcd panel is little loose .. my cousin is sure that the fault is in its ribbon the thing lcd is standing on ? when i rotate my screen it goes white bt then when i press power button two times it comes back again and colors are bit out too.. is their any one else facing this problem my ppc is roughly used ! coz of that lcd ribbon is damaged i presume ...i hv been ripped off ..bt their is nuthin i cod do except get it fixed
guide me if i am asking questions in wrong section !
thank you
mdakait said:
i am very new to these things .. noob .. i hv got my hands on qtek 9000 and i plan on upgrading it to wm6 my device info is
R 1.03.00
G 42.36.p8
D 1.13.64 wwe
i request for a poll please.. to make it easy for me to decide ... i went thru wiki and i hv nearly understood how to flash my ppc.. bt i m stilling having jitters if i might mistakely brick my ppc..so help me in choosing the best rom for my ppc
p.s my ppc lcd panel is little loose .. my cousin is sure that the fault is in its ribbon the thing lcd is standing on ? when i rotate my screen it goes white bt then when i press power button two times it comes back again and colors are bit out too.. is their any one else facing this problem my ppc is roughly used ! coz of that lcd ribbon is damaged i presume ...i hv been ripped off ..bt their is nuthin i cod do except get it fixed
guide me if i am asking questions in wrong section !
thank you
Click to expand...
Click to collapse
so long as you are sensible you shouldnt harm your device by flashing, so my suggestion is to try all the most recent ones to find one to your liking.
With regards to the white screen, my Universal also had this problem and it was the LCD ribbon.
Midget_1990 said:
so long as you are sensible you shouldnt harm your device by flashing, so my suggestion is to try all the most recent ones to find one to your liking.
With regards to the white screen, my Universal also had this problem and it was the LCD ribbon.
Click to expand...
Click to collapse
i was feeling i wont b helped here... thanks for replying ...
so ur lcd had the same problem how did u gt yr ribbon fixed ?
hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...) and then when i want to switch it on again it doesnt work...! its still on cuz the green LED still works but i get no picture...so i have to take aut the battery and restart it...!
whats wrong there<???
and then i have another problem and its that sometimes when im starting the wizard again after that happened it turns to white screen after the second boot screen (but its not the same moment every time...some time between the second boot screen and till its started up )...or there are wired stripes on the screen for a few seconds and then it restarts...or sometimes it just stucks at the 2nd splash screen or some other time during starting up...
i already switched the rom so i used crackings 6.1 rom before now i use his 6.5 rom...
i thought it could be the cpu??
i runned it on 240 or 252 for like 6 month now...
does anyone know how to fix that or is there no way of fixing it?
thanks so far
nick
the-nj said:
hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...) and then when i want to switch it on again it doesnt work...! its still on cuz the green LED still works but i get no picture...so i have to take aut the battery and restart it...!
whats wrong there<???
and then i have another problem and its that sometimes when im starting the wizard again after that happened it turns to white screen after the second boot screen (but its not the same moment every time...some time between the second boot screen and till its started up )...or there are wired stripes on the screen for a few seconds and then it restarts...or sometimes it just stucks at the 2nd splash screen or some other time during starting up...
i already switched the rom so i used crackings 6.1 rom before now i use his 6.5 rom...
i thought it could be the cpu??
i runned it on 240 or 252 for like 6 month now...
does anyone know how to fix that or is there no way of fixing it?
thanks so far
nick
Click to expand...
Click to collapse
Open the phone and check the connection between the mother board
and the video (its the push connector on the back of the MB) if its tight
you will have to take the lcd section apart ,the other end of the ribbon
cable goes to the lcd and digitizer its a tab locking connection with clear yellow tape over it. check and see if its all the way in ... if that don't fix it get get a new LCD/digitizer from Ebay .. it plugs in i one piece ...
then your off a running ... id watch the over clocking too ... when you
OC the cpu everything runs faster and heat builds up and can damage the phone .. i have seen several OMAP versions here that OC when needed
and return when the phone is idle ..
thats my 2 cents worth on that
the-nj said:
hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...)
...
thanks so far
nick
Click to expand...
Click to collapse
If you are sure that your problems are not rom specific (you faced the same problems with different Roms?) then maybe this is the solution for your problem .
Good luck finding what's going wrong.-
Same thing has started happening to me. I just press the reset button and it restarts just fine. I don't see why others are thinking its a problem with the LCD. A reset shouldn't fix that (I'm guessing).
ave you checked the battrey?
ya so the problem i have is not the one descibed in the video...
its differnet...the stripes are ther not the whole time ...it comes sometimes and then there are these stripes and then the screen turns slowly white...and then sometimes it restarts or its just stays white...
and when i normaly switch it off then the leds are still working just the screen wouldnt turn on...
so i really have no idea whats going on there...i tried to make a video but now it didnt happen for almost 4 days so i just hope that its not happening again...
but its really wired and i think its the cpu cuz i cant think of another reason for that...
there is a problem in my uni for past many days... but i've been ignoring it....
but now it has grown up my head and i don't know what to do??
my phone is not having sound on it... i've searched through many other threads but didn't got any soution... i've open up my uni and checked all the circuits and connections they are intact(proper)...
but when i start beating the back of my uni or start beating up the screen it starts working.. then after a minute or two it stops... then i've to do it again... according to me there is no problem with the speakers... i think there is some problem with the screen
if anyone has a solution or recommendations then pls tell me.. i'll be highly thankful
thanx in advance
please please help...
sounds like h/w. how have you checked connections? the usual culprite is the headphone socket. if you have Uni opened up, then check the contact is being made properly when plug is removed (use multimeter).
-Jonny- said:
sounds like h/w. how have you checked connections? the usual culprite is the headphone socket. if you have Uni opened up, then check the contact is being made properly when plug is removed (use multimeter).
Click to expand...
Click to collapse
sir thanx for a reply.. but i don't use my headphones. it has been a long time that i've used them... so how can be there a problem due to that???
when i take my phone into the landscape mode it has a higher probability that my uni would be giving some sound...
i hope u are able to understand what m i trying to say??????
sanchitgrover said:
sir thanx for a reply.. but i don't use my headphones. it has been a long time that i've used them... so how can be there a problem due to that???
Click to expand...
Click to collapse
because it can get dust and muck in it
However if it is s/w, then if you burn another ROM you should not have the same problems. (If that is the case, it may also have been a piece of s/w that you installed).
no sir i've formatted my phone a lot of times.. infact i flash it once atleast in a week time and sometimes even less then that.. becoz there are regular updates available from our great chef's
i'm currently using tomal's 6.5B2.. and in the past to days i've flashed my rom thrice.. earlier with luca's one,then with explode one, at last using tomal's 6.5
so any other guess u can make...????
i tell u how do i repair it most of the times... i the volume increasing button and shake my phone with a great force.. then suddenly it starts giving sound... after sometime it stops again.. then i've to do it again... please sir pls help me..
sanchitgrover said:
so any other guess u can make...????
i tell u how do i repair it most of the times... i the volume increasing button and shake my phone with a great force.. then suddenly it starts giving sound... after sometime it stops again.. then i've to do it again... please sir pls help me..
Click to expand...
Click to collapse
Well try to take a toothpick and wobble in the headphone shocket as it might have been dust or something that is making uni think that headphone is plugged in while it is not... had same problem ... i flashed many roms and radios and at last tried this and it did work.... So i'll say give it a go...
Hello everyone.
Yesterday, I got weird problem (in one hand). Phone screen on touch becomes blurry, like it's liquified... This never happened before and I believe it's hardware problem. Here's YT video which shows whats happening:
http://www.youtube.com/watch?v=oMsFQddR1FM
Anyone had this kind of problem? Maybe some advice?
max5800 said:
Hello everyone.
Yesterday, I got weird problem (in one hand). Phone screen on touch becomes blurry, like it's liquified... This never happened before and I believe it's hardware problem. Here's YT video which shows whats happening:
http://www.youtube.com/watch?v=oMsFQddR1FM
Anyone had this kind of problem? Maybe some advice?
Click to expand...
Click to collapse
There is something pushing on the screen from behind. Push hard on a laptop screen or anything LCD and it will do that. It's to do with how LCD works.
I know, but how come it happened out of nothing? Phone has not been opened...
Sent from my GT-I5800 using XDA App
yup mate
i got this issue when am using motorok e8
it has fine lcd.... but the main drawback is lcd issue
well in the on topic., as hillbeast said... the gap btw the lcd screen and the screen case gets shortened... so when u put ur finger..it hitting the screen case/something below..
SUGGESTION:
ur lcd got damaged... use till it lost completely.. meanwhile buy one lcd or report to
this to the nearby samsung service centre
austin266 said:
yup mate
i got this issue when am using motorok e8
it has fine lcd.... but the main drawback is lcd issue
well in the on topic., as hillbeast said... the gap btw the lcd screen and the screen case gets shortened... so when u put ur finger..it hitting the screen case/something below..
SUGGESTION:
ur lcd got damaged... use till it lost completely.. meanwhile buy one lcd or report to
this to the nearby samsung service centre
Click to expand...
Click to collapse
Friend of mine who works in T-mobile told me the same thing. He said I should wait for it to stop working and bring it to service as I still have warranty.
Thanks everyone.
cool mate
hope u will get the phone back to u hands asap.... so that u can explore and enjoy sg3
Hmm, my cousin had the same in SG3, but it dissapeared. He doesn't do anything about it, just it was gone after some time...
guys my phone started having that ODD TOuchscreen insensitivity problem which was posted here in some previous threads
and like all of them it started for me This rainy season, after 2 years of using without any problem
the problem as you know...
is the touch remains functional for like 2-3 seconds after unlcking...that too if you havent used for a while
after which it becomes barely unusable as the touch becomes unresponsive..
its like the options key and the back key are being pressed,
pressing the home botton will end up being the screen getting captured
there was a solution of heating up the phone using a hairdryer etc..havent tried...
the option of getting the screen replaced...but for some even after getting the screen replaced
the condition right now is such that even pluggin into charger aint helping
Click to expand...
Click to collapse
so right now im at a loss regarding what to do..
should i get my screen replaced
clean flash?
ill try heating the phone ,doesnt have a good source of heat -_- right now...
if any of the previous members who have experienced this ,had solved it..kindly reply..ty
im on ddlf2 deodexed bam kernel15 btw...
NO replies ??? Someone?
k4mik4z said:
NO replies ??? Someone?
Click to expand...
Click to collapse
If u had this mobile for 2 years i recommend u to change ur mobile and get new one, because water problems are hard.