My Orange SPV has died on me - did it yesterday, just went blank and wouldnt turn on, then after battery removal and fiddling it burst back into life and was fine. Today it did the same, but it won't come back - I thought it was a flat battery, but its still the sames with a fresh charged one. When I plug the phone into the charging cradle, the 'phone live' light shows red.
Any suggestions how to fix it ? - the unit is bog-standard, and I havn't done anything to kill it.
Any suggestions welcome, thanks
M
grizelli said:
Any suggestions how to fix it ?
Click to expand...
Click to collapse
Can you still access bootloader mode?
Sascha
Phone is dead
Fraid not, the phone won't turn on at all
M
mine used to act that way alot when i used rom1.6
no response from on button at all
but hardreset did work
give it a try
hey simialr problem with me also i m using xda2 with wm5 my phone got hang bootspash image also crush
i can go bootloader mode but after instaling new rom same story
i can go hard reset menu also but after that phone didnt start after doing that
in hardreset manu enable kitl =no regisrty hive =yes format storage =yes
what shoud i do ?????
plzzzzz
i have the same problem! the phone doesn't work anymore!
tryed new reflash, complete 100%, but after hard reset nothing happened.
tried reset - only O2 screen but with the display turned off, no led is working when i try to charge it.
if anyone has a solution pleeeeeeeeeeeeease help!
suggestions
suggestions
does any on of you know about the hardware ??????????
it is the problem of hardware not the software
if know hard ware then i told you what to do !!!!
for softely done
my suggestions is keep you spv to charging for hole night and look at morning
what happen????
may it help you
hey i chek hardware it okay i try fill charge bettery also
hi chirag
if know the hardware then heat up the processor with blowergun or hotairgun what ever you call it but put the liquide solder past on it first then in hotairgun the temp on 4 and air on 4 or 5 and blow for 1.5 to 2 min on processor and disk on chip or ram give the hot air to it after that put ipa on it and clean the hole thing put your display and battery and make hard rest or flash fresh rom on it .
i think its work for you
the reson of boot up failure
is because the extrem use of your phone is make the bollgride which is connecting your processor and motherbord Drysolder in it after this action all drysolder is resolder to its place and its start reworking
Thanks
[email protected] Rules
hey i ll try and let u know
i think the backup bettery is also to be chek if it not booting up device then also its not strating what u say ???
backup battery
backup battery is not the isshu because in win5 you dont need backup batt. its only for not reseting the time and date.
you go to the extremely good hardware eng. or serivce person to fix it if cant find any one plz call me. i live in poona if you want my help we r nearby you r in bombay and me in poona.
but i can try
but i can try.
[email protected] Rules
oh thats nice of u i ll try here if didnt work i ll contact u sure ...
thanks
its my mail add.
its my e-mail add.
[email protected]om
if you need...............
hey i think i hav a serious problem my touchpad is damaged or the screen has moved from its allignment theres a patch developed on ma screen which consists of small bubbles..
donno wats d problem but m desperate to install the new 2.03 rom so please experts can u all help me out wid this..
jus lemme know d solution...
please thanks alot..
to all of u..
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
i also have the same issue...do anybody know how to fix this??...
hey ppl my biggest problem is my alliginin screen doesnt get over only...it goes on n on...
its dam irritatin..
hey
rogalxxx said:
I have a very simillar issue. Touchpad works fine for a while, but afert tapping keyboard a few times it goes misaligned. the difference is up to 5mm! after I callibrate it , it warks fine for a while tahan goes misaligned again. ? what is wrong with that thing?
Click to expand...
Click to collapse
i had that problem too after change my covers.. but after 2 days its ok.. don't know what happened.. i read that if you clean the display with the Cloth of cleaning sunglasses with A bit of strength myabe it works..
also check this Touchscreen Calibration Data
hope it helps...
see ya..
Hello There,
I'm from Portugal and i bought 1 MDA Compact on TMobile. I Unlocked it with XDAdev v 1.6 and it works great in my network. After i done a stupid thing. I flash it with a wrong rom and it "Dead" . To recover i Reflash with a Jam_10605_169_10500 ship and it return to live. Now power on and let me calibrate stylus but when try to enter in the main screen apear a White Screen. I can manage and view all with Sync, but nothing more apear into Handset.Only a white screen. Can you help with this please.
Dear Marco,
Usually that's a sign that your LCD is broken. I've got one extra magician with exactly that same problem. Everything works but not the LCD, which seems to be dead. To confirm it, i've tested this "broken" magician with a good LCD and i can see everything...
I guess that you have done something extra besides only upgrading the ROM...
I need to align the screen again & again can any one help me out wer the problem lies
how did this happen? i also encounter a similar problem, when the phone gets warm... when i press on the right side, the click registers mode and more to the left... and when that happend, if i try to go to the alignment screen, it just hangs in there like.. forever... if i put the phone in standby mode, everything gets back to normal in a few minutes.. the problem repeats every time the phone gets warm...
Same
First i was also having the similar problem but now its totally unaligned i.e even after a time its same i click on extreme left it click on extreme right
nasty man... dunno why this is happening... so, my screen is dying.. damn :| what kind of mods did u do to your phone? software ones
I have the same problem! Seems this is an manufacturing issue that's affecting many Diamonds! Does the warranty cover this?
Same problem
Hi Guys,
i'm also facing the same problem,
i have hard resetted my mobile then for a week it worked fine and then again the same problem... damn i lost my all data while hard resetting.... does any one have solution.
did u guys found n e solution
crazymushroom88 said:
did u guys found n e solution
Click to expand...
Click to collapse
YEAH! ) i sent mine to warranty today, lol 15 long days at max until it will be back in my loving arms
i dont know if this might help
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
i can see some leaked fluid above my screen ........... i cannot even explain it , because it's above the screen but i cannot touch it ........ so it's in between.....
i've had the same thing happen to me and sent it in for warranty.
came back ok for awhile, now its happening again. I usually just suspend my phone (power button) and give the LCD a rub that helps it a little, buts its quite unbearable at times.
I've sent it in to warranty for a second time today, warranty is expiring on the 8th of next month so they better fix it by then .
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again.
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again. (Only gets blurry flickery at boot)
My diamond only get flickery at the boot and by going to standby and back it disapears.
Guess im lucky
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
Please do update if replacing the LCD does in fact get rid of the problem
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
dont think that actually helps - you'll prob need to replace the digitizer .
hello2004 said:
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
Click to expand...
Click to collapse
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
reflexivemedia said:
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
Click to expand...
Click to collapse
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
realazyjai said:
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
Click to expand...
Click to collapse
i assure you cannot replace just the lcd, not without a hammer! I got my old part back, I can take some pictures of it, just in case And the digitizer is one and the same with the front case... the diamond is a very small phone, that's why there are no screws or other stuff to hold together the lcd and the rest of the case.
So unfortunately for you, they may have told you they replaced the lcd, but i think they did nothing :|
It is very clear that we had the same problem... the digitizer itself got broken... not some cable or lcd
anyway, if your phone has warranty, you are a happy man