hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...) and then when i want to switch it on again it doesnt work...! its still on cuz the green LED still works but i get no picture...so i have to take aut the battery and restart it...!
whats wrong there<???
and then i have another problem and its that sometimes when im starting the wizard again after that happened it turns to white screen after the second boot screen (but its not the same moment every time...some time between the second boot screen and till its started up )...or there are wired stripes on the screen for a few seconds and then it restarts...or sometimes it just stucks at the 2nd splash screen or some other time during starting up...
i already switched the rom so i used crackings 6.1 rom before now i use his 6.5 rom...
i thought it could be the cpu??
i runned it on 240 or 252 for like 6 month now...
does anyone know how to fix that or is there no way of fixing it?
thanks so far
nick
the-nj said:
hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...) and then when i want to switch it on again it doesnt work...! its still on cuz the green LED still works but i get no picture...so i have to take aut the battery and restart it...!
whats wrong there<???
and then i have another problem and its that sometimes when im starting the wizard again after that happened it turns to white screen after the second boot screen (but its not the same moment every time...some time between the second boot screen and till its started up )...or there are wired stripes on the screen for a few seconds and then it restarts...or sometimes it just stucks at the 2nd splash screen or some other time during starting up...
i already switched the rom so i used crackings 6.1 rom before now i use his 6.5 rom...
i thought it could be the cpu??
i runned it on 240 or 252 for like 6 month now...
does anyone know how to fix that or is there no way of fixing it?
thanks so far
nick
Click to expand...
Click to collapse
Open the phone and check the connection between the mother board
and the video (its the push connector on the back of the MB) if its tight
you will have to take the lcd section apart ,the other end of the ribbon
cable goes to the lcd and digitizer its a tab locking connection with clear yellow tape over it. check and see if its all the way in ... if that don't fix it get get a new LCD/digitizer from Ebay .. it plugs in i one piece ...
then your off a running ... id watch the over clocking too ... when you
OC the cpu everything runs faster and heat builds up and can damage the phone .. i have seen several OMAP versions here that OC when needed
and return when the phone is idle ..
thats my 2 cents worth on that
the-nj said:
hey...so i think there something really wrong with my wizard...
when im just using it sometimes when i switch it off ( not ike completly just press the button once...)
...
thanks so far
nick
Click to expand...
Click to collapse
If you are sure that your problems are not rom specific (you faced the same problems with different Roms?) then maybe this is the solution for your problem .
Good luck finding what's going wrong.-
Same thing has started happening to me. I just press the reset button and it restarts just fine. I don't see why others are thinking its a problem with the LCD. A reset shouldn't fix that (I'm guessing).
ave you checked the battrey?
ya so the problem i have is not the one descibed in the video...
its differnet...the stripes are ther not the whole time ...it comes sometimes and then there are these stripes and then the screen turns slowly white...and then sometimes it restarts or its just stays white...
and when i normaly switch it off then the leds are still working just the screen wouldnt turn on...
so i really have no idea whats going on there...i tried to make a video but now it didnt happen for almost 4 days so i just hope that its not happening again...
but its really wired and i think its the cpu cuz i cant think of another reason for that...
Related
After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?
please some one help me
free_10w said:
After Upgrading to windows 6 Some times My phone screen suddenly fade to white , blue or black.. I've tried different roms and still the problem exist
can someone help me? what is happening to my universal? is it because WM6 still not stable?
Click to expand...
Click to collapse
Which Radio Rom are you using ?
Try another
wout
I've been using 1.17 but when I use 1.15 the screen also fade to blue or white
Try without sd card
or
try older (reliable) wm5 rom
wout
I already try KAMAL WM5 but still it happens and I also forget to mention that when the screen fade to white or blue my phone suddenly become hot..is there any possibility that the problem is from the hardware?
That doesn't sound good.
could you try another battery ?
and turn wifi of
was wifi on ? when screen went with/blue
wout
Yes, I have try another battery and the wifi is off..
The screen went blue when I was receiving sms or when I want to send sms.
sometime when I left the phone standby for half an hour the phone cannot be turned on and I have to press the reset button and after entering the splash screen the screen went blue/white again so I have to reset several time
i think its something e related to the vibrate? its shorted or somehting and the power is going there but no vibration.. thus causing the overheating and the freezing.. im not sure but maybe.. also have you dropped the machine?
Appears to be a hardware problem. You may try this, it may work:
1. Remove the battery. Keep the battery out at least for a few hours.
2. With the battery out operate a few keys randomly. Also operate the on/off switch a couple of times.
3. Remove your sim card and storage card.
4. Put the battery back.
5.Allow the booting process without intruption.
6. If it works well just switch off, remove battery and insert the sim card and sd card. reboot
Although it sounds a bit wierd it does work in some cases. Worth giving it a try.
thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys
free_10w said:
thanks Wout,dj_gabzz,d_ranade for the help
I have installed the official WM5 and now it seems ok..
it means that the problem is because of the roms not the hardware..
and once again thanks a lot guys
Click to expand...
Click to collapse
Glad you could solve your problem.
same here man.. glad you got everything straightened out, i hope you dont encounter further problems..
once again thanks
Hi
Today this has happened twice in same day -When ever my Vox is lying Ideal the network indicator blinks also if its on charge i wil get a orange LED.but if I press any keys (lets assume to make a call) the Screen still remains Blank...
This problem I had also faced earlier my O2 NEO (Prophet) before it went dead completely!!
I am worried is it an indication of slow death!!
P.s I dont wanna lose the vox as i lost my beloved prophet
Still waiting for some useful tip
which ROM?
I guess you are talking about similar problem as what I have.
http://forum.xda-developers.com/showthread.php?t=394358
I usually get this problem once in every two days. I uninstalled all the extra apps leaving very few which I am sure wouldn't cause any harm. Since then I haven't seen this problem. Its been more than two days.
What I do when I get this problem is, remove the battery for 5 seconds and put it back before I attempt a restart. I don't think you need to worry about this too much if not for the calls that gets lost when the phone is in this state.
Sometimes it happens to me where the screen, once it goes blank, will not come back on. I usually just reboot it and forget about it. I've had my vox for a year and its happened on every rom I've used probably about 5 or 6 times.
sankarrv said:
I guess you are talking about similar problem as what I have.
http://forum.xda-developers.com/showthread.php?t=394358
Actually My vox does not show any thing on the screen totally blank and just the GREEN LED (network) blinks...
Thats also true tht I sometimes goes off completely and its too hot to handle.
In my case (blank screen) i usually make a call on my cell and it comes out of the blank screen to display incoming call...
I guess u shud try the same thing rather thn removing the batt ...as i had already lost my O2 Neo in the same manner.!!
I think we still need a solution on this
Ps. My ROM is Windows mobile 6.1 v1.0b for Vox by Dr. Martin Gonzo
Click to expand...
Click to collapse
Hi all.
I recently came into the posession of one of these awesome devices.
my only problem is that when turned on, the screen comes on but is just pure white.
the device seems to boot up ok as you can hear all the noises in the background, also the digitizer works as the backlight comes on when you touch the screen and you can hear windows mobile clicking away.
could this be the lcd thats broken? or could it be an issue with the mainboard?
anyone have any ideas? or have had the same problem?
i just dont wanna go out and buy a new screen to find out thats not the problem lolol.
(btw i have tried hard reseting multiple times and that dosent seem to be the problem)
thanks all.
Um how du know that you have HR properly if you cannot see the screen, or can you see it on the HR screen?
Also if you can can you see the bootloader, and have you tried a different rom, never know it may work
heya chris, thanks for the reply.
reason i know it has hard reset ok is i used a htc touch next to it to guage where the setup screen (screen calib etc) buttons were and tapped on the digitizer unitll it got to the main screen and reset itself after customisation (took friggin aages to do that lol)
then managed to fudge it to get media player running by using the arrow buttons etc.
sayin that what combo of buttons do youse to HR. ill give it a try if theres another way ;-)
For me its ok and windows key, the one beneath the send and end keys
Then when booted it will say "blah" and press send to restore. Press send then it will take about 15 seconds or so to restore then it reset's and boots up again.
To do the bootloader its the camera button and reset, but i dont know if thats helpful if you cant see the screen!!
Um is it still under warrenty if so go that route and if not try taking it apart and then try to see if any of the screen connectors are loose i think that someone has done this already on here with pictures if you want some help with it.
tried the hard reset again and still met with the same white screen. dang...
as for warranty, its an ex business phone i got through my work so no warranty, and i have since stripped it down 3 times to look for faults.
have tried slotting the ribbon cable in and out of its socket and had no luck.
hmm i would say maybe new motherboard or screen, which you prob already know by now.
Apart from that im out of ideas as to what to say would be a solution for the problem with it or how to fix it without replacing parts
cheers for all your help chris.
i think ill just have to take the dive and order a new screen.
god i hope its the screen lol
I have a HTC Tytn II and for the past month and a half I have been using the Android OS (Haret) on it. Just a couple days ago it somehow went to the Tricolor screen. I can always boot up Windows Mobile by plugging in the usb charger and then soft resetting it but it I think there is something wrong with my phone. Sometimes my keyboard doesn't work when I'm running Windows and sometimes I cant hear calls. When I boot up Android sometimes the buttons on the front wont work with the exception of the directional buttons. Every time I reset it, it goes to the Tri Color screen. I need to fix this.. can anyone help me?
Hoz said:
I have a HTC Tytn II and for the past month and a half I have been using the Android OS (Haret) on it. Just a couple days ago it somehow went to the Tricolor screen. I can always boot up Windows Mobile by plugging in the usb charger and then soft resetting it but it I think there is something wrong with my phone. Sometimes my keyboard doesn't work when I'm running Windows and sometimes I cant hear calls. When I boot up Android sometimes the buttons on the front wont work with the exception of the directional buttons. Every time I reset it, it goes to the Tri Color screen. I need to fix this.. can anyone help me?
Click to expand...
Click to collapse
Android on Kaiser is as beta as it gets, if I were you, I would flash back to a stock rom and start testing to see if you have software, rom or hardware problems
I did a hard reset and I still have the same problem. It continuously goes back to the Tri Color screen and sometimes my keyboard doesnt work when I am typing texts. But the Android was running very smoothly. I used it for over a month. Could dropping my phone have caused this?
Hoz said:
I did a hard reset and I still have the same problem. It continuously goes back to the Tri Color screen and sometimes my keyboard doesnt work when I am typing texts. But the Android was running very smoothly. I used it for over a month. Could dropping my phone have caused this?
Click to expand...
Click to collapse
That would do it ! Like I said, try flashing back to the stock rom amd see if that solves any issues.
Hoz said:
Could dropping my phone have caused this?
Click to expand...
Click to collapse
Lol thanks for that I needed a good laugh. Next you'll say things rattle inside it when you shake it. Or it's no longer waterproof after you went for a swim.
As previously stated, reflash and check that way. If no joy you might wanna open her up and check the guts for any loose connections.
I'm not sure if it's lag or what, but my phone screen won't come on. I think it's a ribbon that was disconnected or something though. For about a few hours if I were to press power to see the lock screen, all I saw where a bunch of rainbow static. Then I powered my phone on and off because nothing would work and now it's jut black! Does anyone know what's wrong? I can't boot into clockwork so I don't think it's a rom problem. Does anyone know the problem or have any idea to fix? Anyone I should ask specifically?
maybe water? even having my phone in the bathroom while i take a shower cause me that
It's not water, I never bring my phone close to place with water :/
can you boot into the screen where there are 3 droids with the skateboards? (i not sure whats the name)
I think I can boot and my phone still works, because it still rings when someone calls and it still vibrates when someone text it, but I just can't pick up or reply (because the screen won't come on). I should be able to boot into that thing, but I can't anything :/
well bro sorry i cant help you :/ maybe it could be the screen,the ribons or somethings loose. did it fell?
aznangel1408 said:
I think I can boot and my phone still works, because it still rings when someone calls and it still vibrates when someone text it, but I just can't pick up or reply (because the screen won't come on). I should be able to boot into that thing, but I can't anything :/
Click to expand...
Click to collapse
Seems like either broken ribbon that connects the screen to the "motherboard', or dead screen itself. That's exactly how 1 of my phones died (it was too complicated to disassemble and fix it myself)
But once I had similar problem with my TP2, the screen first become unresponsive to any touch, and then it went just black after restart (and every next restart). However all keys did work.
Hard reset somewhat helped, the screen actually came back, but it was still stuck on setting up Windows Mobile (if you know WinMo: the part where you calibrate touchscreen), apparently "touch" part of the screen didn't work.
I thought it is ribbon or screen assembly, but since all the keys worked I flashed another ROM and what do you know: all problems went away. It worked fine for as long as I had it. I never figured out what caused it/was the problem.
koete said:
well bro sorry i cant help you :/ maybe it could be the screen,the ribons or somethings loose. did it fell?
Click to expand...
Click to collapse
MT4GS said:
Seems like either broken ribbon that connects the screen to the "motherboard', or dead screen itself. That's exactly how 1 of my phones died (it was too complicated to disassemble and fix it myself)
Click to expand...
Click to collapse
Yea I think that's the problem here. I think I'm just going to borrow a friends mt4gs to use and navigate recovery and do a back up and just buy a new one and restore. Thanks for all the help guys