how to take a screen shot with the spen?
never mind have to use screen write with spen
Related
I have had my XDA II for two months and since my last synch I find I am now tapping with the stylus in vain on my screen to enter the system. The screen is in perfect condiition but now does not respond. When I pressed the record or camera buttons on the side the programs load but I can't select anything because the screen does not respond to any stylus taps.
I did a hard reset and now I can't get past the first screen that says please tap here to continue.
Has anybody experienced this problem and can they suggest a way forward for me to get it resolved ASAP as a I am going to Spain tomorrow with an XDA II which is not responding to stylus taps.
Sounds like a hardware fault if you have tried a hard reset.
no response
I now know what the problem was.
I put on a new screen protector. And for some reason the XDA cannot sense any taps on the screen from the stylus.
I removed the screen protector and it works fine.
However the XDA did work with the last screen protector that I put on, so I do not know why it doesn´t with the new ones.
Re: no response
tryirish said:
I now know what the problem was.
I put on a new screen protector. And for some reason the XDA cannot sense any taps on the screen from the stylus.
I removed the screen protector and it works fine.
However the XDA did work with the last screen protector that I put on, so I do not know why it doesn´t with the new ones.
Click to expand...
Click to collapse
I have been using screen protectors from various manufaturers, each time I had to re-calibrate the screen (for that reason) but has never come across situation as described above
regards, monika
Tapping problem
hello mate
The reason for your stylus not to work with the screen protector is because you have the edge of the protector toching the sides od the xda.....make sure you have a very small gap between them.
:lol:
You didnt mention the screen protector in your first post, I had the same with a protector on an ipaq that was slightly oversize and touched the very edges, no taps worked either until I removed the protector.
Has anyone noticed with the galaxy note 10.1 that the touchscreen doesnt always respond? Seems to happen when I click the home screen icon every now and then.
This could also be partially my fault because I dont have a screen protector yet and have been over the top washing my hands before touching the screen.
driekus33 said:
Has anyone noticed with the galaxy note 10.1 that the touchscreen doesnt always respond? Seems to happen when I click the home screen icon every now and then.
This could also be partially my fault because I dont have a screen protector yet and have been over the top washing my hands before touching the screen.
Click to expand...
Click to collapse
This usually happens if you have the pen out near the screen and then you use your fingers to touch the screen , the reason for this is that the Note disables touch input so that you can rest your palm on the screen while writing.
If it happens outside of the above scenario, then you may have a faulty touch panel.
It does happen when the pen is still in the dock.
Damn damn, have to pay to ship the item back to B&H.
Will play around some more tonight and confirm that it is a problem.
driekus33 said:
It does happen when the pen is still in the dock.
Damn damn, have to pay to ship the item back to B&H.
Will play around some more tonight and confirm that it is a problem.
Click to expand...
Click to collapse
My touch screen went completely dead on me today. It would work find until the screen timed out or was turned off. After that the touch screen would not respond to anything, finger or pen. I am on stock not rooted with encryption enabled for exchange.
Played around with it some more and paid more attention. Seems to happen with task manager when i have to hit the small cross to close apps.
I just got my screen replaced recently and I noticed that when I take the battery cover off and bend the screen backward a little bit I can easily slide my fingertip between the screen and phone, I was wondering if this is normal? I say this because I feel like I can slide my finger into this groove and pull the screen off.
Thank you
aamir123 said:
I just got my screen replaced recently and I noticed that when I take the battery cover off and bend the screen backward a little bit I can easily slide my fingertip between the screen and phone, I was wondering if this is normal? I say this because I feel like I can slide my finger into this groove and pull the screen off.
Thank you
Click to expand...
Click to collapse
No that isn't normal, sounds like they didn't replace the adhesive tape during the repair.
Hi,
I don't want to use Gear 2 without a screen protector. So I ordered one from ebay.
But I live in Turkey and it will take 3 weeks for the protector to arrive. Meanwhile, I want to cut out a screen protector for myself from my unused S3 screen protectors.
I need a screen template to print for easy cut out of the protector.
How/where can I find one ?
Thanks.
I'd appreciate any ideas...
Have someone hold the Gear or if you can figure out a way to hold it in place this would work too.
Take a piece of printer paper.
Take a traditional pencil ( not mechanical ).
Put the piece of paper over the watch face and hold the pencil at a sharp angle ( to use the side of the lead not the tip ) and go back and fourth over the face of the watch.
This will leave you with a outline of the edge of the screen.
Cut this out and now you have a template to make your own screen protector!
If you don't understand let me know and I'll try to take some pictures.
ahfunaki said:
Have someone hold the Gear or if you can figure out a way to hold it in place this would work too.
Take a piece of printer paper.
Take a traditional pencil ( not mechanical ).
Put the piece of paper over the watch face and hold the pencil at a sharp angle ( to use the side of the lead not the tip ) and go back and fourth over the face of the watch.
This will leave you with a outline of the edge of the screen.
Cut this out and now you have a template to make your own screen protector!
If you don't understand let me know and I'll try to take some pictures.
Click to expand...
Click to collapse
I think I understand you but this is a very rough way of getting a template. If I cut this out, I will have a slightly bigger screenprotector. It will not be very nice.
That's why I was looking for an official (or semi amateur) drwaing.
good
zeuseduardo9 said:
good
Click to expand...
Click to collapse
i just cut one a bit smaller the mywatch .. im waitin for my protector to
idont see why your so conerned about having a perfect one/
mrmrmrmr said:
I think I understand you but this is a very rough way of getting a template. If I cut this out, I will have a slightly bigger screenprotector. It will not be very nice.
That's why I was looking for an official (or semi amateur) drwaing.
Click to expand...
Click to collapse
You just need to cut a little smaller than the outline. Believe me anything that is hand cut isn't going to be perfect anyways...
good morning. can anyone tell me if this phone comes out with a native screen protector?
can anyone tell me if i can tap in always on display everywhere instead of s9 in only home button small?
thanks
myabc said:
good morning. can anyone tell me if this phone comes out with a native screen protector?
can anyone tell me if i can tap in always on display everywhere instead of s9 in only home button small?
thanks
Click to expand...
Click to collapse
The S10e comes with a screen protector, but scratches easily. You can tap anywhere on the screen to activate the screen if the AOD is turned on.