Related
Figures they'd come out with it a week before I'm thinking of picking up an Imate Ultimate 8150. But it's out for those of you interested link below.
P3600 Full Body Invisible Shield
http://www.shieldzone.com/item_description/HTCP3600I.html
Nice!! It's listed for the P3600i, but I guess it's exactly the same as the P3600.
Anybody tried it already?? Better than a regular silicon cover?
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
PaulusUK said:
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
Click to expand...
Click to collapse
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Andych said:
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Click to expand...
Click to collapse
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
earl00 said:
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
Click to expand...
Click to collapse
Get life....yes the clip shows it being fitted to an ipod......if you gothered to watch the clip you would have seen that the piece for the back also does the sides as they wrap around.....apart from the size etc the actual method of applying this will be the same.
Next time smart a*s do your homework rather than mouthing off.
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
PaulusUK said:
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
Click to expand...
Click to collapse
Lets get this straight....I haven't used this product...however when I saw the "link" I went to the manufacturers site to get a better understanding of it....
I watched the video and while it was of it being fitted to an ipod I got a basic understanding of how it could be fitted to a P3600i.
I didn't think it was "cling wrap", I understood that there would be several sections involved....including one for the recessed screen (yes, just like a normal screen protector) and I too would be skeptical of it protecting all parts of the phone.
There is a tendency in these forums for people to not search out information but to ask seemingly dumb questions.....
As this product is new for this model....why not just ask if anyone has tried it or ask the manufacturer for more information.....or is that too hard to do????
NOT FULL BODY...JUST SCREEN ONLY
The site says full body not Screen only, that's a separate option...
I would really like to know if and how exactly this works on 3600.
I actually have silicon case and screen protector for mine, but this would make it considerably smaller...
Bought and use the InvisibleShield
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
I want to see it
Post a picture please
Isn't it invisible?..
See the invisible sheet
Well actually it is quit difficult to see but here are some picures. The picture from the side shows you some edges.
Edges
The edges that you can see in the pic don't seem to line up perfectly, how were the dimensions on the rest of the edges?
i've been thinkin of getting one of these since i saw them for ipods but that messy edge is scaring me away a little, also how are you finding the screen protector after a little more use?
Edges reply
Well the edges are more because of my talent I think. The reason why I showed you this is because at least you can see something. For the rest it alligns perfectly.
After using it for a while it still seems a great product. I accidentaly dropped the thing but no scratch at all. What you do notice is the slightly more pressure you need when using the stylo. Also the screen protector is not as smooth as the original screen making the sliding a little more difficult. Also the plastic sticks to your ear while calling. But all in all still recommended.
I just put it onto the white one...
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
sabestian said:
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
Click to expand...
Click to collapse
Any update to report? I'm thinking about buying one and would like your oppinion since you've now had it for a while.
Dimitri- said:
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
Click to expand...
Click to collapse
Same question for you... Any updates? Thank you...
Definately recommended
After using it a few months I still think it is definately worth the few euro's. Ok it sticks a bit when calling for a long time and I think I even managed to get a small scratch on it but I sort of abuse the fact that I have the shield. Store it with keys, never use a case etc.
No I have bought some useless accessoires such as aluminium case (blocks GPS) and the remote for mediaplayer but the shield I would really recommend.
Cheers,
Dimitri.
What do I use to remove the scratch? thx.
slikr said:
What do I use to remove the scratch? thx.
Click to expand...
Click to collapse
I see a kit for ipod for that exact thing a few years ago - maybe its worth asking.
i dropped my diamond and the screen has a very nasty looking scratch along the botto of the screen.
please advise what i can do to fix or do i have to replace it for a new touch screen.
if i need a new screen where in th uk is the best place to have it re fitted
thanks
I think it's called Displex scratch remover or similar - try it out it will fill the hairline scratch and make it invisible.
salada2k said:
I think it's called Displex scratch remover or similar - try it out it will fill the hairline scratch and make it invisible.
Click to expand...
Click to collapse
Are you sure this will work? Displex melts a bit of the acrylic plastic on most screens so that it fills up the scratches. Last I heard, the Diamond's screen is glass.
OnePointOh said:
Are you sure this will work? Displex melts a bit of the acrylic plastic on most screens so that it fills up the scratches. Last I heard, the Diamond's screen is glass.
Click to expand...
Click to collapse
If its the screen I'd be carefull applying anything as you risk the display becomes blurred (same reasons thet don't remove scratches on glasses). If it's made of glass maybe consult a car repair shop reparing wind screens. Let's hear what you find out.
OnePointOh said:
Are you sure this will work? Displex melts a bit of the acrylic plastic on most screens so that it fills up the scratches. Last I heard, the Diamond's screen is glass.
Click to expand...
Click to collapse
The outer layer is not glass. It's the layer underneath the digitizer that is glass. Have you noticed that you can indent the screen when you touch it, say, with the stylus? That should prove it for you.
As far as the displex goes I personally haven't tried it as I use a screen protector (which on a side note I have ruined today as my stylus has developed a sharpness that has scratched the crap out of it). So the idea is to replace it when it's gone bad with a new one. If you've scratched the actual outer surface then you could look at replacing it (I'm not sure how you'll go about doing that) or you could try the displex.
Attention: use only on non-coated surfaces and plastics; when used on mobile phones, treat only the transparent portions of the display lens. Not for use with touch screen displays.
JayZee2 said:
Attention: use only on non-coated surfaces and plastics; when used on mobile phones, treat only the transparent portions of the display lens. Not for use with touch screen displays.
Click to expand...
Click to collapse
Uh-oh... Haha I think I recommended Displex to someone before... I've seen people use it on GPS displays and it worked fine, even with touch screen... But if they say no, don't risk it.
looks like it will have to be a new screen,
is the outher screen a seprrate part to the glass section of the screen ??
does anyone know where i can have it replaced in the uk?
If your going to replace it then I'd have a go at polishing it first and see what happens. What you got to loose.
I once used a bit of Brasso on the screen of my car headunit, got the scratches out a treat.
silkw0rm said:
looks like it will have to be a new screen,
is the outher screen a seprrate part to the glass section of the screen ??
does anyone know where i can have it replaced in the uk?
Click to expand...
Click to collapse
If you're going to have a new screen anyway I'd first experiment with some of the various proucts discussed. If it works you save the repair, if not then no harm done as you'l get a new dispaly (at the cost of a new TD likely).
update
managed to get hold of a new screen for a reasonable price too
link
http://www.mobilefun.co.uk/product/17042.htm?referer=FR_PROD-PR-P-17042
now can someone please direct me to where i can have this fitted,
or better still if you know how to change the screen can you please show me instructions of this and tools required.
regards
silkw0rm said:
update
managed to get hold of a new screen for a reasonable price too
link
http://www.mobilefun.co.uk/product/17042.htm?referer=FR_PROD-PR-P-17042
now can someone please direct me to where i can have this fitted,
or better still if you know how to change the screen can you please show me instructions of this and tools required.
regards
Click to expand...
Click to collapse
Search for the tech. manual on the net. It explains step by step how to do it. Good luck with it. I cannot recall where I found it, but even somewhere in xda is a link I think.
http://www.pdacenter.ru/razborka/raz...touch-diamond/
it was in my housing replacement thread before...
very difficult job from what i can tell for replacement
almost as annoying as iphone DIY since it has the most annoying housing ever
this may sound stupid but it is stuff that works
take a piece of microfiber cloth
a banana
toothpaste
and any glass cleaner
1st take a small piece of banana and rub it on the screen for about 3 minutes and take your microfiber cloth and whipe it off... (do not use water) and do not use paper towel or toilet paper!!!!(it will ruin the screen
now flip your microfiber to the clean side and set it down...
take your tooth paste (white colgate is the best) and rub it over the screen for 5 minutes again take the clean side of microfiber and rub off the toothpaste... it will smell minty for a couple of days but eventully it will go away!!!
please try this it works take the time it will work and again do not use any water!!! that means dont put water on cloth and wipe off
hope it helps
htcfanboi said:
this may sound stupid but it is stuff that works
take a piece of microfiber cloth
a banana
toothpaste
[..]
hope it helps
Click to expand...
Click to collapse
Right... I can understand using tooth paste, but a fricking bannana? How funny is that? I honestly would like to see a guy polishing his £350 phone with that.
You've made my day
Ps. I'd suggest using a carrot and then a potato afterwards
COuld be the small amount of acids in it.
A lemon may be too strong. Banana has a fine 'polishing' structure too.
it works man.... banana is my friend......
delicious too
htcfanboi said:
it works man.... banana is my friend......
delicious too
Click to expand...
Click to collapse
Hehe, My apologies then, I'm gonna give it a go as soon as I spot the first scratch
im trying to crack the transformer open and do u think the back is glued on or is it screwed on? im thinking theres probrably some screws behind the lable but cant seams to find anything here that wont scratch it to remove it. hit me up with ideas and hopfully I can post some kind of video on how to dissacemble the transformer.
It will most likely be fastened with screws. I think if it had been glue peoples cases wouldnt be 'creaky'. There were some pics on a Chinese site showing it open. I saved them to my pc, If I find them I'll upload.
Edit: Well I found them but they're not really showing the case. I'll attach them anyways and you can see if they help or not. It looks like once you get the bezel off the back just slides clean off.
Ok well scratch screws under the asus logo, thanks very much for those pics. I already have the screws out from the bottom. I'm guessing the back seals with some type of clips
Looking at there tools in second picture seams they used a guitar pic to losses it from its edges
cowballz69 said:
Looking at there tools in second picture seams they used a guitar pic to losses it from its edges
Click to expand...
Click to collapse
Maybe try a credit card?
Ha tore up my room looking for my guitar pic lol. Ill try my credit card
When in doubt use a hammer.
stuntdouble said:
When in doubt use a hammer.
Click to expand...
Click to collapse
Lol, tryed to use a credit card but its to thick, going to stop at the store tomorrow and pick one up
cowballz69, pm sent
If you have one, your best bet is a Stanley knife (boxcutter, I think you call them). Should be thin enough, you'll just have to be careful not to nick any internal crap.
If it were me, I'd use a scalpel, but I know most people don't have one handy.
ok well heres my mini review untill i get a guitar pick, i got the bottom half to crack open with a credit card(to thick but i did it), i was then able to slide the card from one end to the other. The plastic clips holding the metal are very very crappy. the metal was extreemly easy to bend and by just putting the card threw the bottom was enough to bend it. i was however; able to put it back together with out making it look as if i opened it, but u would need a ULTRA Thin piece of plastic to complete the mission(DO NOT USE ANYTHING ELSE BUT PLASTIC,,THE METAL AROUND THE EDGE IS SUPER FRAGLE). seams all ASUS does is pop the plastic backing in and screw the bottom and its off to who every buys it.
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.
cowballz69 said:
(Losining the bottom screws lowerd the light bleed that was there by 30% ( i was a full brightness and back screen and loosining the screwes made a big impact so the issue with the light bleed is to much pressure on those areas)
seams this is easy enough just need the right tools.
Click to expand...
Click to collapse
Interesting. That seems to be the very spot where my screen has a little backlight bleeding. I'll try it out in a few minutes.
Youtube it
If this is the fix. A youtube vid would be awesome. Ready set go
paleridr said:
If this is the fix. A youtube vid would be awesome. Ready set go
Click to expand...
Click to collapse
thats not the only spot i have light bleed, i also have bleeding on the top portion and theres no screw to losen so must be on to tight from the inside. however this does prove that the bleeding is from pressure not the screen itself
You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.
e.mote said:
You need these spudgers,
http://www.dealextreme.com/p/professional-premium-precision-phone-disassembly-tool-7-piece-set-23050
Get a few sets (if you're planning on opening up electronics on a regular basis). These are soft plastic, and will wear out after a few uses. You don't want to use anything harder like a knife, as then you will mar the 'lips' on the device shells. Aesthetics aside, that will show up as evidence of tampering, meaning goodbye warranty.
Most electronics use plastic snap-in clips to hold the shells, along with screws and possibly soft glue. Going slow will prevent the clips from snapping off, but not always.
You can find these same tools on Amazon and eBay. Just search on 'spudger', which is their name.
Use the guitar pick to get the initial crease, push one of the thicker wedges into the crease, and slide it along the seam. This assumes you've gotten all of the (hidden) screws.
Click to expand...
Click to collapse
breaking a clip is def possible in this case
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
it's a torx.
jrac86 said:
How did you get the screws on the bottom off? Do you have the right screw driver (any ideas where I can get one)?
Click to expand...
Click to collapse
Use a Torx T6 bit.
When you opened it up, was there anything to suggest there was any way Asus would know you had opened it up please (if you hadnt bent the bezel ofc) if you needed to send it back under warranty for some reason?
opening is not recomended threw my experiance * I used the thinnest guitar pic today*,and the metal around the edge;any slight flex and it ends up staying that way and wont go back on straight no matter how carefull u are, also the clips that hold the plastic back to the bezil is ULTRA CRAPPY to a point u have a 50 50 chance of it not holding the plastic cover anymore. ON the plus side; if u loosen the bolts in the bottom, u can relieve the light bleed there. so reguarding the light bleed its best to just send it back to ASUS to get it fixed.
MY Next step is having ASUS fix my light bleed on my own tablet and not have them give me a replacement.
I will be posting a before picture of the light bleed when i send it out , and a After picture on when i recieve it back from them. good idea??
It's my first post so I would like to say hi to everyone,
I would like to replace the chrome bezel from my device. It's all scratched and it doesn't look good. I know that some people are just removing the "chrome" paint and sand it but in my case plastic underneath is light gray so it won't look good in my opinion.
I've read that screen is glued to the bezel and it's not so easy to do it that's why it would be great if someone could write step-by-step tutorial how to do it or to share his experience. Is it possible to do it at home without damaging the device?
i am also looking to change the bezel. From what i have found out so far the home button and the touch buttons (menu and back) are attached to the bezel. Also those buttons are glued to the screen and the screen itself glued to the bezel and the housing underneath it. So it should be very difficult and risky to try to change it. Most people in these forums agree that it is impossible to remove the screen without breaking it.
I can't really believe it is impossible to do it, and all who reported on it have tried to replace broken screens so maybe they were not careful enough. On the other hand no one has claimed to successfully removing the screen without damaging it.
Better be safe and hide the ugliness behind a case or something
So i decided to sand the chrome away in mine first to see if can get it look good and thus avoiding the hussle of opening the case
here are some photos of my work so far. Now i need to polish it
It looks really good with your white backplate... but I prefair to keep my phone black
How did you remove the chrome.. Sand it away? i tried scratching it off but it too risky in some places
Sent from my GT-I9001 using xda app-developers app
i used a nail file to sand the chrome away. I covered the edges of the screen with some tape to prevent scratches and also had a screen protector on just in case.
Just jam the tape in the gap between the bezel and he screen, you 'll be fine.
Also patience is highly advised
It looks prety good.
where did you get the white backplate from
http://www.ebay.co.uk/itm/WHITE-BAT...K_Replacement_Parts_Tools&hash=item3cc4149074
how much to pay?
It look very nice with white bezel.nice work!
my s plus was white to begin with,i didn't change that.
actually the bezel is grey and not white, it doesn't look all that great up close but it's still better than the damaged chrome.
i mean to paint it glossy white to match the backplate as much as possible but i am still looking for the right paint.
i will come back and upload more photos when done
Sent from my GT-I9001
It's very nice
How about paiting the border black after you sand it down? I'm thinking of doing this with some spray paint.
keeekeeess said:
How about paiting the border black after you sand it down? I'm thinking of doing this with some spray paint.
Click to expand...
Click to collapse
Give us news : did it work, how is that ?
My chrome has wore off as well. i have a case that covers the either side of the phone but would love to know if they could be replaced safely.
tomsi191 said:
So i decided to sand the chrome away in mine first to see if can get it look good and thus avoiding the hussle of opening the case
here are some photos of my work so far. Now i need to polish it
Click to expand...
Click to collapse
Thank you for this post. It gave me the confidence to try this on my back SGS.
On the corners of the bezel, the paint had chipped off making the phone look ugly. So I used my nails and blunt side of the blade to chip away the paint.
I found out that there are 2 layers of paint on top of the bezel. First is the black glossy paint which actually chips off.. Underneath that is the silver shade. This cannot be chipped off. You have to use your nails to make it go away. But later I figured out aftershave liquid just does fine and easy job. So maybe alcohol or nail polish remover would also work.
Since I used my nails and blunt blade, there are no signs of roughness or scratches on the surface except for 1 or 2 which is barely visible. So thankfully no need of polishing. The device looks much better now. :thumbup:
If you have figured out about the painting the bezel, let us know. Thanks!
Sent from my GT-I9000 using Tapatalk
So my idea worked and i now have a full adhesive screen protector. Covers from edge to edge and there is no halo effect. The protector is on good and does not peel/pop out. I am using a unicorn beetle pro full body case and no problems. Before the case would pop out the protector but not anymore.
What exactly was your idea?
How did you manage this? (For the people that haven't been keeping up with your posts, such as myself.)
Did you use LOCA or OCA film?
Sent from my Galaxy Note7 using Tapatalk
so much detail. so much wow. i wish there was more information, like, what you used, how you did it, instead of a brag post. thanks for the pictures though!
One of his older posts discussed using LOCA. If you use LOCA, how do you get it off if you ever want to remove the screen protector?
Yes I used LOCA glue. To take it off you just heat it. It should be easier to remove than when replacing the digitizer.
I got a couple air bubbles though but id rather have that than a scratched up screen lol
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
teegunn said:
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
Click to expand...
Click to collapse
Donnyohs said:
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
Click to expand...
Click to collapse
Yea i got a little on the speaker but you just have to be care full and as it seeps kut clean it with a rag. The good thing is that it wont dry until you put the black light on it. The part you have to be the most carefull with is the home button. Loca will make it sticky and a little harder to press. I also reccoment you get a protector that is completely clear as the one i got has black on the top and bottom and it prevents the black light from drying the glue under those areas. Clean the screen good. To avoid bubbles look at youtube and see how they apply it. Basically a stick figure but instead of a head it is a y shape. Carefully place the protector and let is slowly spread on its own. Once it stoos spreading then you could slowly press down on it and remove the remaining bubbles. I lined uo thw home and back buttons first and made sure the cut outs were aligned for the camera and sesors. Then i applied the black light on the bottom half furst so that it would align properly. I did this while pressing down on it because the air bubbles kept coming up. I also covered up the top half so that wouldnt dry up. Oncw i got the bottom i got rid of any air bubbles on the top half and did the same. After that i put the phone in a box., close it up, do a cut out for the black light to fit and let it sit for a couple minutes to dry more. Then i cleaned and dried the edges. Make sure not to leave too much of the loca in between the screen and protector so you wont get touch senaitivity issues. And do it where there is no dust. I oly got 1 small air bubble but some like white spots that appear to be dust. And again clean the speaker, home button, sensors, and camera before drying. You could also just scrape it off with a plastic blade that the loca came with. And make sure to use liquid version and not the film.