Database Info

The Diamond screen-protector

Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?

Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com

If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael

willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.

mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..

I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.

mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.

Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you

mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229

I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?

the exim screen protector is very good and smooth

I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.

iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.

I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient

I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market

My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.

I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.

I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.

After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers

where can i purchase the htc screen protector? the original that comes in the box...

Removing Scratches

I have a quite a few scratches on the touch screen and also one on the home button, which is deeper. Most of the scratches on the touch screen are not very deep but theres alot of them. I was thinking of trying toothpaste but have been told that it could damage screen. Any suggestions?

Hi,
there is a polish compound called Displex. This worked best for me on GameBoy, mobile phones and MP3 players.
Just look for it on ebay, should be as cheap as 1-2 Euros (about the same in $)
Regards,
Zuzler

Zuzler said:
Hi,
there is a polish compound called Displex. This worked best for me on GameBoy, mobile phones and MP3 players.
Just look for it on ebay, should be as cheap as 1-2 Euros (about the same in $)
Regards,
Zuzler
Click to expand...
Click to collapse
Hi thanks a lot for the reply Zuzler, are you sure it will work on a touch diamond? And have you tried it on anything touchscreen?

I tried Displex on my old htc tornado, and it didn't work very well for me.

i got HUGE scratches on my TD
the first day i got it there was a scratch on it.. before i could apply the screenprotector...
wish we could buy the front plastic for our TD/MDA, i once checked it out and the front is actually a 'screenprotector (just a piece of plastic with the black on the side ) ' too (at least mda) but if you rip it off you'll see all the bits inside i think.. so applying a fully transparent screenprotector over it would be ugly...

whoops double reply

BRASSO is good. available in the UK and US. do not get into gaps.

Oh, I forgot to mention that:
I think someone around here already wrote that. Since Displex melts the top layer of the display, it might be useless for the Diamond display since it has not the typical plastic-surface. But as I can not confirm that, you might want to research it yourself.
Regards,
Zuzler

Zuzler said:
Oh, I forgot to mention that:
I think someone around here already wrote that. Since Displex melts the top layer of the display, it might be useless for the Diamond display since it has not the typical plastic-surface. But as I can not confirm that, you might want to research it yourself.
Regards,
Zuzler
Click to expand...
Click to collapse
I dont think I will risk testing the brasso, but many thanks for your help Also I have bought a screen protector now it should come in a week or two, I know its a bit late but do you think it will cover up the scratches?

If the scratches are not too deep and you polish the display with a non-fuzzing cloth before applying the protector you should get quite good results.

See this thread...http://forum.xda-developers.com/showthread.php?t=415933

Back in the day when I had a iPod Video, i had heaps of scratches on the screen (brasso wouldn't work very well). I put on a screen protector and none of them could be seen anymore. Wouldn't have known there are scratches on it. I dunno if it would work on the Diamond but its worth a go.

new anti-scratch device
they sell some devices out there which are...
..well, I don't know how to describe them...
I'll try, anyway: they are transparent and very thin plastic layers which often have a sticky compound on one side and you generally apply on the screen (and buttons like in the Diamond) of your phone. In this way you can scratch them but they prevent scratches on your screen.
They are amazing, and everybody should get one together with the new phone...
Obviously you have to purchase one before scratching the display.
I would say that this method could be called PREVENTION!

Stellino said:
they sell some devices out there which are...
..well, I don't know how to describe them...
I'll try, anyway: they are transparent and very thin plastic layers which often have a sticky compound on one side and you generally apply on the screen (and buttons like in the Diamond) of your phone. In this way you can scratch them but they prevent scratches on your screen.
They are amazing, and everybody should get one together with the new phone...
Obviously you have to purchase one before scratching the display.
I would say that this method could be called PREVENTION!
Click to expand...
Click to collapse
Not even helpful dude. Just go back to wrapping you sofas in plastic and shutup.

AdamHC said:
Not even helpful dude. Just go back to wrapping you sofas in plastic and shutup.
Click to expand...
Click to collapse
Well, my sofas came both with a cover, so I can wash them separately.
I bet your ones instead are dirty and you opened already a thread in http://forum.sofa-developers.com with the title 'Removing Stains'

[Q] Minor scratches on screen, will toothpaste help?

OK, so today I threw my Incredible (AMOLED if it matters at all) into my backpack and some keys in there scratched it a little bit. The scratches are not too deep, and you can't feel them or anything, so I was hoping there might be a way to fix it. I looked around a little bit and saw that toothpaste can help for getting scratches out of things like CD's and such. Has anyone tried this on their phone? I don't think anything bad would happen, but I don't really know...
Also, I know that I should have bought a screen protector, so please don't remind me about that.

'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...

I have never heard of using toothpaste to fix scratches, but since the scratches are not to deep I try this product that has done wonders it is called apple sauce and was originally made to fix iPod scratches. Look it up on amazon.
If this helped please press the thanks button

Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.

Nilurun said:
Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.
Click to expand...
Click to collapse
What do you mean "destroy the screen"? How easily can I accidentally do this? I don't want it to get worse!

They say you can do it on CD's it acts like a polish. I think it all depends on the surface of the screen and what kind of metirial it is made up of.
Good luck though!

Vaseline. lol

Yes, it will probably work since toothpaste is the same as a car polish in general
Sent out of my Free Candy Van.

Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?

DirkGently1 said:
Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?
Click to expand...
Click to collapse
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?

There are products here in the UK made under the Duraglit brand as Brasso and Silvo. These are metal polishes, but are also available as a cotton wad roll impregnated with the stuff. I do not know if they are sold in the USA, but there may be something similar from US manufacturers. As their name suggests they are made to clean and polish brassware and silverware.
It is a very fine abrasive suspension, but it also contains ammonia to remove any tarnish, and white spirit to act as a lubricant. They are quite good at removing scratches from watch glasses etc., by gently cutting into the surface, down to the level of the scratch.
On touch screen devices, the touch screen sensitive layer lives above the screen glass, but under a plastic protective layer. It will be this top layer that you have scratched. The product above or something similar may work, but check that the white spirit does not attack the protective plastic layer.
As mentioned above small, circular movements, a little at a time may work. If you cut through the protective layer, you are in trouble.

patrick848 said:
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?
Click to expand...
Click to collapse
Nice to see people getting into the spirit of things Anyway, i hope you find a solution that works. I personally might be tempted to ask the manufacturer to replace the digitizer, as long as the cost wasn't too prohibitive. I tried changing one myself on an old phone and it didn't work out too well

Am not sure about what kind of display cover your phone has. But, if it's capacitive or IR and the top layer is glass, take it to the local wrist-watch merchant/repair center and they could fix it for you using H2SO4 and some filler.
Alternatively, you can have the top layer of the touch panel replaced.
And, next time, do use a screen protector. =D

saintmagician said:
'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...
Click to expand...
Click to collapse
I am not sure if toothpaste would help the screen scratches, its not a tooth scratch.. LMAO

Is it true that tooth paste works like sand paper on glass, does that mean that it contain something harder than glass? I don't have scratch just want to remove paint between my screen protector. Want to know if tooth paste actually micro scratch the glass.

Spigen glas tr help

So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.

blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!

lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?

Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2

hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something

blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.

I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.

You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.

a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.

I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium

just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...

Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.

I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta

i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore

i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium

blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away

blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2

The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.

drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium

i have a full adhesive tempered glass screen protector

So my idea worked and i now have a full adhesive screen protector. Covers from edge to edge and there is no halo effect. The protector is on good and does not peel/pop out. I am using a unicorn beetle pro full body case and no problems. Before the case would pop out the protector but not anymore.

What exactly was your idea?
How did you manage this? (For the people that haven't been keeping up with your posts, such as myself.)

Did you use LOCA or OCA film?
Sent from my Galaxy Note7 using Tapatalk

so much detail. so much wow. i wish there was more information, like, what you used, how you did it, instead of a brag post. thanks for the pictures though!

One of his older posts discussed using LOCA. If you use LOCA, how do you get it off if you ever want to remove the screen protector?

Yes I used LOCA glue. To take it off you just heat it. It should be easier to remove than when replacing the digitizer.

I got a couple air bubbles though but id rather have that than a scratched up screen lol

Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.

I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?

teegunn said:
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
Click to expand...
Click to collapse
Donnyohs said:
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
Click to expand...
Click to collapse
Yea i got a little on the speaker but you just have to be care full and as it seeps kut clean it with a rag. The good thing is that it wont dry until you put the black light on it. The part you have to be the most carefull with is the home button. Loca will make it sticky and a little harder to press. I also reccoment you get a protector that is completely clear as the one i got has black on the top and bottom and it prevents the black light from drying the glue under those areas. Clean the screen good. To avoid bubbles look at youtube and see how they apply it. Basically a stick figure but instead of a head it is a y shape. Carefully place the protector and let is slowly spread on its own. Once it stoos spreading then you could slowly press down on it and remove the remaining bubbles. I lined uo thw home and back buttons first and made sure the cut outs were aligned for the camera and sesors. Then i applied the black light on the bottom half furst so that it would align properly. I did this while pressing down on it because the air bubbles kept coming up. I also covered up the top half so that wouldnt dry up. Oncw i got the bottom i got rid of any air bubbles on the top half and did the same. After that i put the phone in a box., close it up, do a cut out for the black light to fit and let it sit for a couple minutes to dry more. Then i cleaned and dried the edges. Make sure not to leave too much of the loca in between the screen and protector so you wont get touch senaitivity issues. And do it where there is no dust. I oly got 1 small air bubble but some like white spots that appear to be dust. And again clean the speaker, home button, sensors, and camera before drying. You could also just scrape it off with a plastic blade that the loca came with. And make sure to use liquid version and not the film.