My device came into Hard Brick, does not care and do not do anything, any solution?
RIP.
Enviado de meu MotoG3 usando Tapatalk
alguma solução ???
How is it happened?
El_Nuevo said:
How is it happened?
Click to expand...
Click to collapse
I LOSE MY MOTOROLA G 3 2015 AFTER AN UPDATE MY CHILD PRESS THE BUTTON
WITH THE BATTERY ON 20%, THEN COME THE HARDBRICK
IF ANYBODY CAN HELP PLEASE, THE PC NOT RECOGNIZED THE DEVICE
ONLY APPEAR THIS IN PC:
"RELINK HS-USB QDLoader 9008 (COM3)"
OR THIS
"QHSUSB__BULK"
AND I CAN´T FLASH ANYTHING, ANY HELP IS MUCH APPRECIATED :crying:
Marco Ochoa said:
I LOSE MY MOTOROLA G 3 2015 AFTER AN UPDATE MY CHILD PRESS THE BUTTON
WITH THE BATTERY ON 20%, THEN COME THE HARDBRICK
IF ANYBODY CAN HELP PLEASE, THE PC NOT RECOGNIZED THE DEVICE
ONLY APPEAR THIS IN PC:
"RELINK HS-USB QDLoader 9008 (COM3)"
OR THIS
"QHSUSB__BULK"
AND I CAN´T FLASH ANYTHING, ANY HELP IS MUCH APPRECIATED :crying:
Click to expand...
Click to collapse
Bro u really have hard bricked ur device u can recover qualcomm devices with QPST tool but its bit complicated and requires some files you can give it try...
Someone who could guide me in the use of QPST tools to flash my motorola g 3 in HardBrick?
Thanks
try to boot into the bootloader and flash an stock firmware image with fastboot
Richard9026 said:
try to boot into the bootloader and flash an stock firmware image with fastboot
Click to expand...
Click to collapse
I can not get into fastboot mode, recovery mode, it is not detected by the PC
I install the driver Qualcomm
I want to know how I can revive my motorola G 3 xt1543 Flashing firmware
I try to QPST TOOL (Qualcomm) but it is complicated, some TUTO using the QPST TOOL?
Thanks to the community XDA
SALUDOS DESDE LA CIUDAD DE MÉXICO
Just take it to the service center. U will have warranty.
In Mexico the resale of devices is very common , so I bought my moto g 3 therefore, and has no guarantee
MOTOROLA G 3 (XT 1543) HARD BRICK, NO RECOVERY MODE, NO FASTBOOT
NO PC DETECTED, ONLY APPEARS LIKE THIS:
"RELINK HS-USB QDLoader 9008 (COM3)"
OR THIS
"QHSUSB__BULK"
ANY HELP PLEASE, THANKS
---------- Post added at 07:54 PM ---------- Previous post was at 07:05 PM ----------
POSIBLY IMAGES
ANY HELP PLEASE
Read this: http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
AND
Motoflasher works for Moto X and Moto G, I don't know if it works for Moto G3: http://forum.xda-developers.com/moto-g/orig-development/bootloader-tool-motoflasher-t2959076
Related
help me, I have a serious problem with my D838, no catches or detect drivers on my pc, is totally dead you install a rom of a f350, believe that it can revive or plane is completely dead, I appreciate your help
thanks and regards
can you enter the download mode? if you can flash d838 v0D kdz file with
LG Flash Tool 2014
it is very easy
If you cannot get into download mode, or if you don't see aLG logo, the the phone is gone and the only thing that can fix it is a jtag box.
mike2959 said:
If you cannot get into download mode, or if you don't see aLG logo, the the phone is gone and the only thing that can fix it is a jtag box.
Click to expand...
Click to collapse
thanks buddy, I think I'll have to search for jtag or case, and hope to have here in mexico, because I can not turn it in any way
thank you very much and greetings from mexico
hay my friend what did you do? did you fix the phone? or not?
rowihel2012 said:
hay my friend what did you do? did you fix the phone? or not?
Click to expand...
Click to collapse
how are you friend, I could still revive dead no longer know what to do, I hope to find a solution, Greetings
help meeeee
oprink said:
how are you friend, I could still revive dead no longer know what to do, I hope to find a solution, Greetings
Click to expand...
Click to collapse
someone help me to fix it, appreciate your friends help, thanks:crying:
so you cant enter download mode?
g pro 2 full brick
rowihel2012 said:
so you cant enter download mode?
Click to expand...
Click to collapse
I can not enter the download mode my cel no signs of life, only recognizes Qualcomm HS-USB 9008 QDLoader achievement not turn it on, I would appreciate any help, thank you very much
oprink said:
I can not enter the download mode my cel no signs of life, only recognizes Qualcomm HS-USB 9008 QDLoader achievement not turn it on, I would appreciate any help, thank you very much
Click to expand...
Click to collapse
you can try contact YH: tungkick777, he will fix your phone via Teamview, he's Vietnamese
i am using LG Flash Tool 2014 and work fine
Hi I have same problem F350L dead when I connect to system it detect as android device only it is not going in download mode or recovery it is totally dear please help
hello
my lg g pro2 Qualcomm HS-USB QDLoader 9008 :crying::crying::crying::crying::crying::crying::crying::crying:
Yes, I already hardbricked my xt1543 after a mistake flashing a stock rom of 2gb in 1gb ram. If someone could help... I will be very grateful!
That doesn't sound like something that will cause a hard brick. Can you describe the symptoms? Can you get to fastboot mode? When you plug your phone into your computer, what do you see in device manager?
This doesnt enter fastboot. When Connect USB to ubuntu its detected as Qualcomm modem. But the store has refunded me and I bought other moto g
Thanks for answer!
Sent from my MotoG3 using XDA Free mobile app
Hard Brick Moto G 1543 3ra Generacion
squid2 said:
That doesn't sound like something that will cause a hard brick. Can you describe the symptoms? Can you get to fastboot mode? When you plug your phone into your computer, what do you see in device manager?
Click to expand...
Click to collapse
Hello greetings!
I am new to the forum, and just have a hardbrick my bike g 1543, I could no warranty claims to have the bootloader unlocked, so now I need urgently if some technology expert android could share the solution to this serious problem. ..
Had a ROM CyanogenMod on cell and try to flash the ROM Original stock, everything was fine until I gave Enter to restart the system, there has been only in black screen when connected to my PC device appears as Qualcomm QDLoader 9008 HS-USB (COM3).
Please someone help me! ...
feljes said:
Hello greetings!
I am new to the forum, and just have a hardbrick my bike g 1543, I could no warranty claims to have the bootloader unlocked, so now I need urgently if some technology expert android could share the solution to this serious problem. ..
Had a ROM CyanogenMod on cell and try to flash the ROM Original stock, everything was fine until I gave Enter to restart the system, there has been only in black screen when connected to my PC device appears as Qualcomm QDLoader 9008 HS-USB (COM3).
Please someone help me! ...
Click to expand...
Click to collapse
How did you Hardbricked your phone? and if you cant acces fastboot than im pretty sure
that your phone is dead.
jctmf said:
Yes, I already hardbricked my xt1543 after a mistake flashing a stock rom of 2gb in 1gb ram. If someone could help... I will be very grateful!
Click to expand...
Click to collapse
Some user have been saying that there is not a real difference between 1gb and 2gb stock roms, but I'm not sure...
Hi everyone; my device is "bricked", only is recognized how to: "qualcomm 9008" mode.
I tried using "turbo unbrick" but i have errors; I attached one screenshot of error that appear.
I tried tutorials but not good results for me ..
I wait for your answers & help, many thanks, cheers!
try to flash a stock rom with RSDlite
NeoWave said:
try to flash a stock rom with RSDlite
Click to expand...
Click to collapse
Does not start in "fastboot" mode, it's dead; only "Qualcomm 9008" mode... I read about EMMC problem when commands fails, maybe "box JTAG" is the only solution.. I'm locked, i don't know, i not have more ideas; ¿"factory cable"?..
Thanks for your answer, cheers.
how did you brick it?
NeoWave said:
how did you brick it?
Click to expand...
Click to collapse
After unlocking the bootloader, flashing version was "QUARK_RETBR_5.0.2_LXG22.33-12.13_cid12" via "fastboot command", I do not remember where I got command message "failure", was extinguished and relit not ...
Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:
Connect to pc via fastboot mode and flash stock rom
Sent from my AO5510 using Tapatalk
Use the following link for guidance
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
http://www.allfreeperks.in/2015/09/unbrick-how-to-unbrick-and-repair-moto.html?m=1
Sent from my AO5510 using Tapatalk
Cant go into the fastboot mode. Nothing happens when i press and hold the specific buttons.
Kuldeep Singh Rajput said:
Sorry if this is in the wrong place. But i really am in a desperate need of help. My moto g2 suddenly turned off during the lollipop update and won't turn on anymore. I have tried to go into fastboot but no suck luck. The screen doesn't even light up when connecting the charger. Please help:crying:
Click to expand...
Click to collapse
If it powered off during update and it won't boot to any of its modes, won't charge, won't connect to PC and won't respond in any kind of way then it is hardbricked, if that's what happened then your device is dead. You can see if a shop can repair it or get a new device.
Sent from my SCH-I535 using Tapatalk
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Yes, your device is hard bricked. See your device detect in HS-USB QDLoader 9008 mode. If yes then your Android recover. Try android dbrick tool. I can give you the link of the tool. But I can't post on the XDA. Because it showing trojan infection. I used that tool and I recover my android from same condition. it not harmed my PC or my Android.
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification
Kuldeep Singh Rajput said:
i just realised it actually does respond when i connect it to a pc. In the device manager it is shown as qhsusb_bulk
Click to expand...
Click to collapse
Try this
forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Sent from my SCH-I535 using Tapatalk
Yeah iv'e been trying that method for sometime now. But i just am unable to install the Riff box driver no matter how much i try. it just keeps saying the driver is without and digital signatures. Although i have disabled the signature verification in windows and all that the post suggested exactly as it says. Please help :crying:
Kuldeep Singh Rajput said:
Nope, just detects it as qhsusb_bulk. I tried the method of installing the driver to make it work. But it just keeps giving me digital signature error. Even after disabling the signature verification
Click to expand...
Click to collapse
Try these tutorial and install Qualcomm driver.
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Sent from my Lenovo K50a40 using XDA-Developers mobile app
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Then do a google search for
"Unbrick qhsusb_bulk Moto G"
That should give you a lot of links to various tools and methods, try them and see if it works for you.
Sent from my SCH-I535 using Tapatalk
Kuldeep Singh Rajput said:
Thanks but the flashing tool QFIL fails to send the programm.ecc file into the phone
Click to expand...
Click to collapse
Your Android must show QHS-USB QDLoader 9008 port to begin next process.
It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:
Kuldeep Singh Rajput said:
It is shown as the bootloader but the tool fails to send the programmer packet to the device:crying:
Click to expand...
Click to collapse
Is your Android detects in 9008 port
It is detected in the port
Kuldeep Singh Rajput said:
It is detected in the port
Click to expand...
Click to collapse
Port is 9008 or 9006
qdloader 9008
Kuldeep Singh Rajput said:
qdloader 9008
Click to expand...
Click to collapse
Then give me your mail ID. I give you the download link of the tool. Earlier I said I can't post link on the XDA forum.
That would be amazing. Here is my email id - [email protected]
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Go to service center they can help now your device will falashed by official id by mi flashtool
gautamajay52 said:
How this happen to you???
What wrong you did?
Sent from my Redmi Note 7 Pro using Tapatalk
Click to expand...
Click to collapse
Rooted without unlock bootloader ..
Grajatyadav said:
Go to service center they can help now your device will falashed by official id by mi flashtool
Click to expand...
Click to collapse
I'm going there
Mi authorised service center they
said motherboard complaint and return the product ..
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
Try EDL mode or Get it to care. IG
sourav24071999 said:
How it happened ... elaborate it...
---------- Post added at 11:19 AM ---------- Previous post was at 11:19 AM ----------
Try EDL mode or Get it to care. IG
Click to expand...
Click to collapse
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working ???
jishnukollam said:
Actually trying to root and installed twrp..
Then i flash custom rom.
After that phone doesn't turn on..
Showing only in pc Qualcomm 9008 mode.
When i try to flash with mi flash tool they ask me authentication .. i enter username and password but its not working bro .. any method to fastboot mode ? I tried all method but its not working
Click to expand...
Click to collapse
Try EDL mode .. also nxt time just follow proper guidance for root ... Stay updated to violet community discussion in tg
Tg channel link ?
From kerala.
jishnukollam said:
Tg channel link ?
Click to expand...
Click to collapse
Bro i'm from kerala.
You cant flash in edl mode.
it requires mi authorized login.
It happened to me also. Hard brick not turning on.
Just went to service center and told phone bricked in between update process.
So they repair it within 1 hour.
Its the only way i know possible.
MOD EDIT: Telegram link removed, read the STICKY!
Redmi Note 7 Pro Hard Bricked
Not turn On
only show Qualcomm HS-USB QDLoader 9008
No display
What can i do...
{Note: I have trying to boot patch in umt by select model: redmi note 7.. After that phone is bricked..}
Please help me...
Redmi note 7pro 100% working process
My mobile is redmi note 7 pro I tried to install twrp and bricked(soft) 10 times after all i installed it to show twrp whoami and after some bricks successfully installed magisk
//My opinion: if you are not a geek don't try twrp instead flash orangefox recovery it has inbuild magisk installer "warn you don't install disable-dmvariety-forceencryption. zip = otherwise bootloop"//
##Power users: without disable encryption changing anything in system leads to bootloop don't uninstall system apps (disable encryption works in twrp you need that method contact me in"[email protected]")##
jishnukollam said:
My Redmi Note 7 Pro Hard Bricked
Not turn On !
only show in PC device Manager Qualcomm HS-USB QDLoader 9008
No fastboot
No display
How to turn on this device ?
Help me please
Click to expand...
Click to collapse
is it working now ?