I have an N8000, it came with China software 4.0.4.
I have been trying and trying and trying to flash the Nordic Rom. 4.1.2
No matter what i do, odin fails to flash
i have tried:
Clear data/cache multiple times
installed kies
installed drivers
odin 1.85, odin 1,87, odin 3.07
after numerous fails, i tried rooting with chainfires auto-root
auto root took just fine, so i know odin/my pc can talk to the tab
i have tried debugging on/debugging off
i have since unrooted using SU built in function, and still to no avail
odin window shows the following (odin 3.07)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!
if i dont get this thing off the **** chinese software im going to lose my mind
i am due to fly tomorrow and need to have this setup...can anyone help?
ninjamunky said:
I have an N8000, it came with China software 4.0.4.
Usual question on same old posts .
Is it a genuine Samsung Note 10.1 or a fake/ clone .
ID:0/004> Can't open the serial(COM) port.
reads as possible bad connection wrong cable Kies running not using a motherboard port all the usual fail connect answers
jje
Click to expand...
Click to collapse
ninjamunky said:
I have an N8000, it came with China software 4.0.4.
I have been trying and trying and trying to flash the Nordic Rom. 4.1.2
No matter what i do, odin fails to flash
i have tried:
Clear data/cache multiple times
installed kies
installed drivers
odin 1.85, odin 1,87, odin 3.07
after numerous fails, i tried rooting with chainfires auto-root
auto root took just fine, so i know odin/my pc can talk to the tab
i have tried debugging on/debugging off
i have since unrooted using SU built in function, and still to no avail
odin window shows the following (odin 3.07)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!
if i dont get this thing off the **** chinese software im going to lose my mind
i am due to fly tomorrow and need to have this setup...can anyone help?
Click to expand...
Click to collapse
Calm down.............
1 - Are you saying it is from China or had the China 4.0.4 ROM installed?
2 - Why do you want Nordic Rom. 4.1.2 ?
3 - Can you change the language in the "Chinese software" Because there is a Chinese 4.1.2 firmware that you maybe able to install and change it to english.
.
kkretch said:
Calm down.............
1 - Are you saying it is from China or had the China 4.0.4 ROM installed?
2 - Why do you want Nordic Rom. 4.1.2 ?
3 - Can you change the language in the "Chinese software" Because there is a Chinese 4.1.2 firmware that you maybe able to install and change it to english.
.
Click to expand...
Click to collapse
Update:
first, yes its the real deal and not a clone
N8000 model, was loaded with china rom 4.0.4
since last post, i was able to use kies to update to chinese jellybean
i am still not able to update to a different country rom(i am currently pulling UK rom from sammobile)
latest error code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I dont want the chinese rom as i have no interest in QQ, its horribly written services, or government spyware.
i am about to head back to the states and would like access to my google services(which are not installed in the chinese rom)
i buy alot of electronics over here for use at home as some things just aren't available back home(unlocked devices)
i have used this same pc to flash on my P7500, GS2, and even was able to use odin to root earlier(which i haev undone)
i killed kies and all its services
still cant flash a different countries firmware, or at least the one i have, so i am downloading a different one.
the device has been able to update via kies, register, etc
i know the usb is a direct solder to my motherboard, not a daughter board, i have tried 2 ports
its the cable that was in the box(all accessories appear to be genuine), i have also tried my P7500 cable, and my spare charging cable...nothing is working
would i have better luck with mobile odin?
any help...im measuring my departure time in hours at this point
ninjamunky said:
Update:
first, yes its the real deal and not a clone
N8000 model, was loaded with china rom 4.0.4
since last post, i was able to use kies to update to chinese jellybean
i am still not able to update to a different country rom(i am currently pulling UK rom from sammobile)
latest error code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I dont want the chinese rom as i have no interest in QQ, its horribly written services, or government spyware.
i am about to head back to the states and would like access to my google services(which are not installed in the chinese rom)
i buy alot of electronics over here for use at home as some things just aren't available back home(unlocked devices)
i have used this same pc to flash on my P7500, GS2, and even was able to use odin to root earlier(which i haev undone)
i killed kies and all its services
still cant flash a different countries firmware, or at least the one i have, so i am downloading a different one.
the device has been able to update via kies, register, etc
i know the usb is a direct solder to my motherboard, not a daughter board, i have tried 2 ports
its the cable that was in the box(all accessories appear to be genuine), i have also tried my P7500 cable, and my spare charging cable...nothing is working
would i have better luck with mobile odin?
any help...im measuring my departure time in hours at this point
Click to expand...
Click to collapse
btw:
Current Firmware
4.1.2
Baseband N8000ZCCMB1
Build JZO54K.N8000ZCCMB1
trying to flash
Sammobile N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5
downloading
Sammobile N8000XXCMA2_N8000OXXCMA1_BTU.zip
ninjamunky said:
Update:
I would try mobile odin
jje
Click to expand...
Click to collapse
thanks, ill give it a go, i appreciate someone responding to my call
if anyone thinks of any other advice also happy to hear it
not as familiar with mobile odin, same firmware files or will i download a new one through mobile odin?
Give me ur address and I can wait outside that window.
Sent from my GT-N8010 using Tapatalk 2
aalupatti said:
Give me ur address and I can wait outside that window.
Sent from my GT-N8010 using Tapatalk 2
Click to expand...
Click to collapse
well played...id probably do the same if i weren;t so frustrated at the moment lol
well between these helpful forum members...and of course the "geek god" chainfire...there will not be any flying tablets in suzhou tonight
thanks all
A few months a go i tried to upgrade my stock n8010 to kitkat by using an official german release. But in my haste to do that I made the mistake of getting my hands on the version for the n8000.
The tablet promptly stopped working and when I tried to turn it on i land on the download screen. At the time i wrote it of and went out an bought my self an new and shiny tab 4.
But today found a official uk release of 4,4 for the n8010. When i try and flash it with odin (Odin3 v1.5) i get this.
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> sboot.bin
<ID:0/018> NAND Write Start!!
<ID:0/018>
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So my question to you good people is if it's fixable by a lay man or if I should I sell it as a glass topped drink tray?
You probably flashed the leaked KitKat. So your boot loader is locked. U have to flash n8000 kitkat firmware without the modem part and it should work
Sent from my SGH-I337M using XDA Free mobile app
Hello everybody !
I REALLY NEED SOME HELP HERE !
I tried to downgrade my S4 i9505 from official 5.0.1 to the official 4.4.2 ..
I tried the same way i did with the 5.0.1 (from 4.4.2 to 5.0.1 )but this time didn t work anymore
Odin says :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH7_I9505YFGGNI1_I9505XXUGNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE HELP
If u had this problem and solve it, please help me buddies !! (((
Hi, thank you for using XDA Assist. If it worked before it'll work again. Try different USB ports, the ones in the back of your PC, and cables. Odin can be finicky.
Thread closed.
i have an s6 edge which i think is incompletely rooted (Knox also tripped) without having any SU apps.what should I do now to use it fully along with OTA updates.
For using ota update u need to flash stock firmware from sammobile or Samsung-update ok & about u install root u should seen app called supersu or try to re flash it supersu zip ok
I dont have supersu app on my phone (SM G9250) also Root checker says Ur Device is not properly rooted while Device status is CUSTOM instead of Samsung Official.
I cant flash stock firmware thru odin as it is repeatedly getting failed even when i tried it on 2 computers and 2 USB cables.
Plz help me.what should I do next to unroot and get OTA updates.
Mate what that failed on odin can u post log that's shows on odin or screenshot? ? anyway try latest official fw from sammobile for ur s6 ok
Odin log
Here is the log
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU1AOE4_G9250ZZH1AOE4_G9250ZTU1AOE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is Galaxy S6 Edge (SM G 9250) from Hongkong.
Ok mate its just knox won't let u install old bootloader on newer bootloader that's installed ok so that fw u try to install have older bootloader than urs now on ur s6 anyway check sammobile h download latest fw for ur device & try it ok
other fw
is this one ok
SM-G9250
Model name GALAXY S6 Edge
Country Hong Kong
Version Android 5.0.2
Changelist 4635752
Build date Tue, 02 Jun 2015 00:20:22 +0000
Product code TGY
PDA G9250ZTU1AOF1
CSC G9250RZH1AOF1
Can i use 5.1.1 fw also????
Mate 1 question : what's os version on ur s6 ? If 5.0.2 then updated to latest 5.1.1 ok remember u can't flash old fw on newer one because knox will reject this & its will give failed on odin so update ur s6 to latest fw on sammobile. .
Failed again.....
I m currently having 5.0.2 and tried to stock 5.1.1 also but result is FAILED again.
See log
ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9250ZTU2COKB_G9250RZH2COKB_G9250ZTU2COKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do next?????
Does it require factory reset also before flashing new FW.
Plz help
No its doesn't required mate & that's really strange i always flash newer fw on my s6 but doesn't get failed mate u had issues that's ur knox won't let bootloader updated strange anyway change odin version & try it with other versions ok & look at this time just do exit odin reboot ur pc then try it again with other odin version ok
Again failed
I tried odin 3.10.6 as well as 3.10.7 but its still failing.
What next now?????????????
IS IT EVEN POSSIBLE TO DOWNGRADE FROM Marshmallow to 5.1 ??
I forgot my google account. I tried to bypass google account by flashing my S6 edge+ to Marshmallow from 5.1. And it made the problem worse. Now i don't see any way to bypass the google account on my s6 edge+.
I don't even see any way to downgrade back to 5.1 so that i can bypass google account. i had no idea what i was doing. Anyone could help me !!! Please
when i try to get back to 5.1 from Marshmallow, i get this error on Odin.
I think it is because of Reactivation lock. It is not allowing to downgrade.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G928FXXU1AOGF_G928FOXA1AOGF_G928FXXU1AOGG_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:48/004> Removed!!
<ID:48/004> Added!!
<ID:48/004> Odin engine v(ID:3.1005)..
<ID:48/004> File analysis..
<ID:48/004> SetupConnection..
<ID:48/004> Initialzation..
<ID:48/004> Get PIT for mapping..
<ID:48/004> Firmware update start..
<ID:48/004> SingleDownload.
<ID:48/004> sboot.bin
<ID:48/004> NAND Write Start!!
<ID:48/004> cm.bin
<ID:48/004> FAIL!
<ID:48/004>
<ID:48/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried Sidesync, and OTG pendrive method. Deas not work on my edge+. Nothing pops up when i connect my pen-drive with the bypass apk. I tried sidesync. Nothing works.
Any way to downgrade or bypass the google account ??!!
Thank you
Thread closed.
OP has posted in the correct device forum.