My SG2 has all of a sudden stopped working, It wont boot up, i can put it into Recovery mode, but Clockwork is saying it cannot mount the SD.
If i try a Factory reset/data wipe, It gets stuck on the Formatting section, The same thing happens if i try to flash another firmware (Pure ICS 2.0.1 and CWM recovery / Rouge XM Recovery and the default firmware)
Any Help would be greatly appreciated.
<ID:0/018> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> boot.bin
<ID:0/018> NAND Write Start!!
This is the error i get while trying to put Stock on with Odin.
It stays like this forever.
Hi there,
My Samsung Galaxy Tab is just unbricked.
I could see the tab booting normally, CM10 is in action.
But the radio is not working anymore on this tab.
broadband version is shown as "UNKNOWN".
Is there any way to resurrect my radio on this tab ?
BTW, somehow i cant even go back to stock version :
http://forum.xda-developers.com/showthread.php?p=33834026#post33834026
ODIN always returns "<ID:0/024> Complete(Write) operation failed."
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DDKL2_P6200ODDKL1_P6200DDKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> cache.img
<ID:0/024> NAND Write Start!!
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi Everyone,
A friend of mine gave me her recently deceased husband's phone to see if I can bypass the pattern lock so that she could save the data in it. I have been trying all sorts of things and I'm having no luck with it.
The phone is a Samsung Galaxy Duos S6802. I can't access it via adb and it does not have a custom recovery, just the stock android recovery. I have tried flashing the latest official rom hoping that would somehow disable the pattern lock but it didn't. I flashed iDuos Kernel by manoranjan2050 from this thread http://forum.xda-developers.com/showthread.php?p=33037765 but it still did not solve my problem. I tried to flash clockworkmod recovery via Odin but it failed.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-trebon.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I don't know what else I can do. Any help anyone here can offer is very much appreciated.
Thank you very much.
I lost my 4g randomly. Blown sim maybe? But i'm trying to return to a touchwiz stock rom so that I can attempt a sim reprovision, but odin won't flash the device.
Here's the odin log
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I535VRALG1_I535VZWALG1_743127_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone seen something like this before? Or solutions to the no 4g problem as thats the root cause of all of this mess.
note: My IMEI is still in tact.
Back in the day I lost data and imei from flashing 4.2.2 roms
I would have to go back to stock to fix.
I would have this problem and I was clueless
For whatever reason I tired on my moms computer and it worked fine.
It was not a bad download either. I still use the same files to date.
Hope this works for you.
God bless the American people
howlatnight said:
I lost my 4g randomly. Blown sim maybe? But i'm trying to return to a touchwiz stock rom so that I can attempt a sim reprovision, but odin won't flash the device.
Here's the odin log
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I535VRALG1_I535VZWALG1_743127_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone seen something like this before? Or solutions to the no 4g problem as thats the root cause of all of this mess.
note: My IMEI is still in tact.
Click to expand...
Click to collapse
Try this link, http://forum.xda-developers.com/showthread.php?t=1762709
Welp, just trying it from my desktop worked. odd. Brought it back to VZW got a new sim. The world is good again.
oh my god!
what is happened?
it was at my side on the bed, not under usage. it did a restart .. alone .. and could not enter the system. it freez at logo!
i tried:
- to wipe, but could not help.
- get the last backup with cmw, but could not help.
- flash tle stock recovery with odin, but gone fail.
- flash a fresh stock room with odin, but gone fail.
- flash pit file with odin, but gone fail.
it can enter download and recovery modes.
what was happened?
i am not beginner and could help many people with much of problems, but .. this thing is totally new for me.
who can help please? i can not still without my note. i use it all the time, specially now where i am in a new country and city
so .... heeeeeeeeeeeeeeeeeelllllllllp
-------------- 1st update
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------- 2nd update
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
What is the ODIN fail message ??
JJEgan said:
What is the ODIN fail message ??
Click to expand...
Click to collapse
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
is there maybe any methode mith ADB or any tool?
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
Can't open the serial(COM) port
Google suggests USB cable problem or KIES? USB drivers .
http://forum.xda-developers.com/showthread.php?t=1622790
https://www.google.co.uk/search?q=a...source=hp&gfe_rd=cr&ei=zkMFVp7fCaux0wW8nKLoCw
but i work with other devices, also with this device before this problem
i deinstalled Kies and the driver, reinstaller the driver and tried again, but it is the same
no help
where to sell it as bricked of defect?
dercncplaner said:
no help
where to sell it as bricked of defect?
Click to expand...
Click to collapse
EBay and describe the problem .
Samsung Tab GT-N8010 Rom doesn't Install, PIT issue, Flashing Screen, do not turn ON
I have Samsung Tab GT-N8010
When I try to turn on, its screen flashing White for half second and then Black and Continuosly till the Battery End.
I try to Install ROM 4.4.2 with ODIN 3.10.7 and get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different PIT files including 3 different N8010.pit and 8013.pit and 8020.pit
but the issue remaining same
I read all the google search including Russian websites at-least but I couldn't find the issue
I have original cable
Solution
I know now the problem and the solution.
The problem: The flash memory on the mainboard is defect. This was the answer of Samsung Support Office.
The solution: The mainboard have to be replaced.
I am now in Turkey and here there is no N8020, but just a bad version (N8005) !!!
So, Samsung could not repair it for me. But I found everything I need for the repair on ifixit, also the board, B´but I could not collect the money for that, so maybe I wait or sell it. Here in turkey no one want to buy it because the phones here have to be registered and this costs much of money. hmm