UHH OHH I just tried this and failed with 2 diffrent md5 downloads. I then tried to turn the phone back on and get a phone linking with a computer with an exclamation point in the middle. Am i screwed?
This is the error I have gotten the last several times.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> all_in_one_odin_ep4d.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021> Firmware update start..
<ID:0/021> lte_modem.bin
<ID:0/021>
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
I'm new to this and I bricked my phone pretty quickly. I'm trying to return it to stock. I have the MD5 file from sammobile. Whenever I try to start the process in Odin v3.10 (I've tried other versions and other MD5 files) I get
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I've been all over different forums trying to find any way to fix my problem but I can't get anything to work. Literally any help would be fantastic!
I am trying to reset to factory, but no matter what I try Odin ends in a fail. Any ideas what else I could try?
Using Odin3 v1.82
Tried with and without charge.pit
Without charge.pit, no boxes checked
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)
With charge.pit, only "Re-partition" checked
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Removed!!
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
oh my god!
what is happened?
it was at my side on the bed, not under usage. it did a restart .. alone .. and could not enter the system. it freez at logo!
i tried:
- to wipe, but could not help.
- get the last backup with cmw, but could not help.
- flash tle stock recovery with odin, but gone fail.
- flash a fresh stock room with odin, but gone fail.
- flash pit file with odin, but gone fail.
it can enter download and recovery modes.
what was happened?
i am not beginner and could help many people with much of problems, but .. this thing is totally new for me.
who can help please? i can not still without my note. i use it all the time, specially now where i am in a new country and city
so .... heeeeeeeeeeeeeeeeeelllllllllp
-------------- 1st update
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------- 2nd update
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
What is the ODIN fail message ??
JJEgan said:
What is the ODIN fail message ??
Click to expand...
Click to collapse
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
is there maybe any methode mith ADB or any tool?
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
Can't open the serial(COM) port
Google suggests USB cable problem or KIES? USB drivers .
http://forum.xda-developers.com/showthread.php?t=1622790
https://www.google.co.uk/search?q=a...source=hp&gfe_rd=cr&ei=zkMFVp7fCaux0wW8nKLoCw
but i work with other devices, also with this device before this problem
i deinstalled Kies and the driver, reinstaller the driver and tried again, but it is the same
no help
where to sell it as bricked of defect?
dercncplaner said:
no help
where to sell it as bricked of defect?
Click to expand...
Click to collapse
EBay and describe the problem .
Samsung Tab GT-N8010 Rom doesn't Install, PIT issue, Flashing Screen, do not turn ON
I have Samsung Tab GT-N8010
When I try to turn on, its screen flashing White for half second and then Black and Continuosly till the Battery End.
I try to Install ROM 4.4.2 with ODIN 3.10.7 and get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different PIT files including 3 different N8010.pit and 8013.pit and 8020.pit
but the issue remaining same
I read all the google search including Russian websites at-least but I couldn't find the issue
I have original cable
Solution
I know now the problem and the solution.
The problem: The flash memory on the mainboard is defect. This was the answer of Samsung Support Office.
The solution: The mainboard have to be replaced.
I am now in Turkey and here there is no N8020, but just a bad version (N8005) !!!
So, Samsung could not repair it for me. But I found everything I need for the repair on ifixit, also the board, B´but I could not collect the money for that, so maybe I wait or sell it. Here in turkey no one want to buy it because the phones here have to be registered and this costs much of money. hmm
ERROR using odin
<ID:0/090> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T561XXU0AOF1_T561ODD0AOF1_T561DDU0AOF1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/090> Odin engine v(ID:3.1005)..
<ID:0/090> File analysis..
<ID:0/090> SetupConnection..
<ID:0/090> Initialzation..
<ID:0/090> Get PIT for mapping..
<ID:0/090> Firmware update start..
<ID:0/090> SingleDownload.
<ID:0/090> spl.img
<ID:0/090> NAND Write Start!!
<ID:0/090> sboot.bin
<ID:0/090> FAIL!
<ID:0/090>
<ID:0/090> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
in downloading mode on my tab's screen
ODIN MODE
SECURE DPWNLOAD: ENABLE
MDM DOWNLOAD BLOCK:1
PRODUCT NAME:SM-T561
CURRENT BIN: SAMSUNG OFFICIAL
SYSTEM STATUSFFICIAL
OP reposted in the correct section:
http://forum.xda-developers.com/android/help/samsung-sm-t3300230/post68287781#post68287781
Thread closed.