[Q] Samsung Charge unknown!!!! - Android Software/Hacking General [Developers Only]

[Q] Samsung Charge unknown!!!! - Android Software/Hacking General [Developers Only]

UHH OHH I just tried this and failed with 2 diffrent md5 downloads. I then tried to turn the phone back on and get a phone linking with a computer with an exclamation point in the middle. Am i screwed?
This is the error I have gotten the last several times.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> all_in_one_odin_ep4d.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021> Firmware update start..
<ID:0/021> lte_modem.bin
<ID:0/021>
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!

Related

[Q] p3100 there is no partition

please help me
i have a gt-p3100 dead
i try to flash it with odin
but every time flashing failed after 80%
then i try to insert pit file to device and flash with "P3100XWALE2_P3100OJVALE1_P3100XXLD6_HOME.tar.md5"
but i see this message :
<ID:0/057> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCLL2_P3100XEFCLK1_P3100XXCLJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/057> Odin v.3 engine (ID:57)..
<ID:0/057> File analysis..
<ID:0/057> SetupConnection..
<ID:0/057> Initialzation..
<ID:0/057> Get PIT for mapping..
<ID:0/057>
<ID:0/057> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tanx to help

[Q] Help installing Offical Poland 4.4.2

I am attempting to update my Note 3 to the Official Poland Kit Kat upgrade. I am have the T-Mobile SM-900t with X-Note 5.1 Rom. I have installed the MD5 file and Odin 3.09. I attempted to install the file and got failure.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I have auto reboot, f. reset time and phone bootloader update all checked. Luckily my phone is not bricked and still running under the old Rom. Any help that you could send my way would be great. Thanks

[help] n8020 restarted alone & freez at logo & ODIN failed!!

oh my god!
what is happened?
it was at my side on the bed, not under usage. it did a restart .. alone .. and could not enter the system. it freez at logo!
i tried:
- to wipe, but could not help.
- get the last backup with cmw, but could not help.
- flash tle stock recovery with odin, but gone fail.
- flash a fresh stock room with odin, but gone fail.
- flash pit file with odin, but gone fail.
it can enter download and recovery modes.
what was happened?
i am not beginner and could help many people with much of problems, but .. this thing is totally new for me.
who can help please? i can not still without my note. i use it all the time, specially now where i am in a new country and city
so .... heeeeeeeeeeeeeeeeeelllllllllp
-------------- 1st update
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------- 2nd update
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work

What is the ODIN fail message ??

JJEgan said:
What is the ODIN fail message ??
Click to expand...
Click to collapse
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

is there maybe any methode mith ADB or any tool?

I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work

Can't open the serial(COM) port
Google suggests USB cable problem or KIES? USB drivers .
http://forum.xda-developers.com/showthread.php?t=1622790
https://www.google.co.uk/search?q=a...source=hp&gfe_rd=cr&ei=zkMFVp7fCaux0wW8nKLoCw

but i work with other devices, also with this device before this problem

i deinstalled Kies and the driver, reinstaller the driver and tried again, but it is the same

no help
where to sell it as bricked of defect?

dercncplaner said:
no help
where to sell it as bricked of defect?
Click to expand...
Click to collapse
EBay and describe the problem .

Samsung Tab GT-N8010 Rom doesn't Install, PIT issue, Flashing Screen, do not turn ON
I have Samsung Tab GT-N8010
When I try to turn on, its screen flashing White for half second and then Black and Continuosly till the Battery End.
I try to Install ROM 4.4.2 with ODIN 3.10.7 and get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different PIT files including 3 different N8010.pit and 8013.pit and 8020.pit
but the issue remaining same
I read all the google search including Russian websites at-least but I couldn't find the issue
I have original cable

Solution
I know now the problem and the solution.
The problem: The flash memory on the mainboard is defect. This was the answer of Samsung Support Office.
The solution: The mainboard have to be replaced.
I am now in Turkey and here there is no N8020, but just a bad version (N8005) !!!
So, Samsung could not repair it for me. But I found everything I need for the repair on ifixit, also the board, B´but I could not collect the money for that, so maybe I wait or sell it. Here in turkey no one want to buy it because the phones here have to be registered and this costs much of money. hmm

stuck on sboot.bin when try to flash stock firmware SM-G955FD

First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

assassin410 said:
First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.

RapsodyR55 said:
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
Click to expand...
Click to collapse
I got the same problem, so do we have to wait for a new Odin Version?

I am also stuck at this situation. Completed the rooting process on my S8 950FD after installing some custom apps, it force reboot and is stuck in a boot loop with (only official release binaries are allowed to be flashed). I then try to flash it back to stock firmware but was successful, and had the same log messages as thread starter.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use:
Odin3 v3.13.1
Samsung firmware: Galaxy S8 SM-G950FD 8.0.0 June 15, 18 Singapore (XSP) G950FXXU2CREH

Stuck here as well!

Facing problem while flashing (SM-J700F)

My phone only can boot up tp downloading mode,unable to access to recovering mode and boot properly.
Alr tried with different version firmware, different phone cable.
Also tried with pit file but not working too.
Log of flashing (sammobile firmware)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2053 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Log of flashing (samfirm)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3448 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Log of pit file flash
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 0 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hope u guys can help me with this problem.
Any further information needed pls tell me.

Database Info

welcome

[Q] Samsung Charge unknown!!!! - Android Software/Hacking General [Developers Only]

Related

[Q] p3100 there is no partition

[Q] Help installing Offical Poland 4.4.2

[help] n8020 restarted alone & freez at logo & ODIN failed!!

stuck on sboot.bin when try to flash stock firmware SM-G955FD

Facing problem while flashing (SM-J700F)

Categories

Resources