Hey guys today I enabled my developer account and insider one and installed both apps on my htx 8x and after enabling them i went to my phone update in settings and my phone found a new update, so I put it to download through wifi and it started downloading going up to 67%
After that i thing i accidently turned off wifi( or didnt! Because im not sure) and now it is stuck and says "you need to connect to wifi" but i am connected! When i disconnect and connect again in continues from 67% but after some minutes it gives that msg again!
I checked with other apps like IE or store...and my wifi is working!
So the question is can I somehow restart the download process? Or delete downloaded files and start downloading again?
Thanks
Related
I bought phone in non working condition; it had a loading problems. Tried hard resest but it didn't helped. So I downloaded ROM upgrade from Tmobile website and when I run the program it stucks at 8%. When I turn the phone on it shows triangle with msg 'software update failed' and when I connect it to pc it does not sync with windows mobile device manager. How can I fix this problem? Is there any way how to make complete restore?
ziedinel said:
I bought phone in non working condition; it had a loading problems. Tried hard resest but it didn't helped. So I downloaded ROM upgrade from Tmobile website and when I run the program it stucks at 8%. When I turn the phone on it shows triangle with msg 'software update failed' and when I connect it to pc it does not sync with windows mobile device manager. How can I fix this problem? Is there any way how to make complete restore?
Click to expand...
Click to collapse
i have same problem please tel me if you find any solution
I have the same problem. Hopefully someone can help.
Hey guys
I have installed the .net 4 framework and then I installed kies. I keep getting prompted by something called "teruten.com" it keeps asking for permission. If I click yes I get a "service initialli failed right after and the blue kies box stays there and then I get prompted by teruten.com again. If i press no, it just asks me again. Then it kies finally loads and when I connect my phone, I couldn't update it because I had it in mass storage mode. So I disconnected it and put it on kies mode and it didn't recognize the phone. Not even in my computer. Its weird, now I just noticed that my computer wont even recognize the phone. Any help would be greatly appreciated.
I kept getting the exact issue when trying to use Kies and finally gave up trying to figure it out. I had all the USB drivers installed correctly and verified but it just wouldn't work. Someone had posted about using Excel to modify the hosts file (if i remember correctly) but that didn't work for me either. I think the bottom line is it's a not for US app at this time. although some have managed to get it to work, it's a crap shoot.
Also when i attempted to get it to work it embedded itself into Outlook 2007. After unistalling Kies I would get an error (can't remember error) in Outlook everytime starting up. Finally had to uninstall and reinstall Outlook to clear that up.
Flamegs23 said:
Hey guys
I have installed the .net 4 framework and then I installed kies. I keep getting prompted by something called "teruten.com" it keeps asking for permission. If I click yes I get a "service initialli failed right after and the blue kies box stays there and then I get prompted by teruten.com again. If i press no, it just asks me again. Then it kies finally loads and when I connect my phone, I couldn't update it because I had it in mass storage mode. So I disconnected it and put it on kies mode and it didn't recognize the phone. Not even in my computer. Its weird, now I just noticed that my computer wont even recognize the phone. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Remove anything Samsung from your computer including drivers.
Download and install Mini Kies. It will reinstall drivers.
Connect phone and see if it's recognized.
STAY AWAY FROM KIES.
Samsung can't give us a phone that works properly and you want to use a software package that isn't designed to work with our phones. That is unless you are not in the US.
If you are trying to use kies to sync your outlook contacts and such you can use kies 1.5.310093_82. You can NOT use it for firmware updates. I used it to sync all my outlook contacts when I first got my captivate. You can find it on the forum. I had uploaded it and so did others. It will try and update to the newer version, don't let it or it will stop working for you.
Here is the download:
Kies_1.5.3.10093_82
http://www.megaupload.com/?d=JDQ5B4I4
Here is the tread:
http://forum.xda-developers.com/showthread.php?t=830194
Thanks guys.
After resetting the phone and continuing with the getting started I found a message on final step "Almost done".
You're just about done setting up your phone. Next, @C:\Data\Programs\{37643125-d0d8-4727-8e2d-1a18476d65c6}\install\SyncUIRes.dll,-101 will walk you through setting up @C:\Data\Programs\{37643125-d0d8-4727-8e2d-1a18476d65c6}\install\SyncUIRes.dll,-102
Also after connecting the phone to PC there is a empty drive named "status".
Please help me to update the phone. It says "unable to check for the updates 80070002 error"
Armennik said:
After resetting the phone and continuing with the getting started I found a message on final step "Almost done".
You're just about done setting up your phone. Next, @C:\Data\Programs\{37643125-d0d8-4727-8e2d-1a18476d65c6}\install\SyncUIRes.dll,-101 will walk you through setting up @C:\Data\Programs\{37643125-d0d8-4727-8e2d-1a18476d65c6}\install\SyncUIRes.dll,-102
Also after connecting the phone to PC there is a empty drive named "status".
Please help me to update the phone. It says "unable to check for the updates 80070002 error"
Click to expand...
Click to collapse
I just bought an 8X for my wife online and I am having the exact same problem. Tried everything I found online and still stuck.
Hello everyone.
Just to get it out of the way, I am very inexperienced with android products. At the moment, I'm having trouble getting my HTC One X (at&t) version to turn on. It all started when I decided to update the android version from 4.1. something to 4.2.2. I went to this site, the HTC website (www . htc . com / us/support/htc-one-x-att/news/) and downloaded the executable file and ran it . Once installation was done a message popped up on my computer stating an error occurred. I look at the phone and it shows the HTC splash screen for a few seconds and it shuts off and immediately turns back on with the HTC splash screen again, a bootloop. I then found out that I can restore the device by entering fastboot and selecting the factory restore option. This didn't restore the device but just entered the bootloop process again. I entered fastboot mode again and this time I selected the recovery option which also failed. I hook up the phone with USB 2.0 to the computer to transfer a stock ROM but computer doesn't recognize the phone anymore ( the computer did at first recognize the phone during installation of 4.2.2). After various attempts to get the phone to be recognized by computer, I gave up and called it quits and decided to power it off through the fastboot option. And now I can't even turn on the phone at all. I plug it to the computer to see if that will prompt the phone to turn on but all that does is charge the battery. The computer does recognize that something is connected to it but fails to recognize the phone.
Is there anything I can do to get this phone working again? I would much appreciate any help with this.
Ok guys I managed to get the phone to turn on again, buts its still in bootloop. Once the phone turns on, the computer notices that the phone is connected and tries to install the drivers but fails as soon as the phone restarts. Essentially the computer is unable to finish installing the proper drivers in time. The driver that its trying to install is "HTC MTP Device".
Put the phone into bootloader mode and run the RUU executable again.
Transmitted via Bacon
Ok its finally working. Thanks for the help!
So you probably did something wrong trying to get a custom recovery or root on your FNF Ifive Mini 4s. Well I did too, that's why I'm writing this
WARNING: This will remove ALL files from your tablet.
Just follow these steps and your tablet should be back on track soon!
So first you have to download FNF Ifive's official upgrade tool which can be found here
Press on the latest one, which as of April 2 is called ifive_mini_4S_US_1.0.6_20170330 Upgrade Tool&Firmware.
Now download both files in the onedrive folder. One is the recovery tool and the other is the latest firmware.
Extract both to a folder of your choosing.
Enter the folder called Driver and run Driverinstall.exe as admin.
Press uninstall driver, press ok and press install driver.
Go back to the main folder and run FactoryTool.exe as admin.
Turn off your tablet.
Enter loadermode on your tablet by connecting it to your computer with the included cable and pressing the powerbutton and Vol-.
Click on "Firmware" in the FactoryTool.
Locate the .img file you downloaded and extracted.
Check the box called "Restore".
Click on "Run" and wait for it to say success.
After it says success you should disconnect the tablet from your computer and just wait for it to boot. This will take a few minutes.
Success! You have now fixed your bootloop and updated to the latest firmware if you did not have it already!
If you had any problems I will be happy to help you
Error
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
TkMelter said:
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
Click to expand...
Click to collapse
That is probably because you are doing something wrong when entering loadermode or because you forgot to first uninstall the driver and then install it. When entering loadermode you must make sure the tablet is connected to the pc with the application open and running. Then you turn it off, and enter loadermode by pressing the power button and volume down simultaneously.
Hope this helps
Worked!!
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
TkMelter said:
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
Click to expand...
Click to collapse
I'm happy it worked
Hello.
And for mac users? How can we do it?
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
gabrielpardal said:
Hello.
And for mac users? How can we do it?
Click to expand...
Click to collapse
The tool only works for windows.
JOAOFRS said:
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
Click to expand...
Click to collapse
By using this tutorial.
Hi,
I successfully upgraded the firmware, it says Build Number ifive_mini_4S_1.0.8-W in my settings but my device still doesn't work properly. The message "Unfortunately Google Play Store/services has stopped" pops up frequently and the boot screen sometimes shows up out off nowhere closing all my apps and locking the device. I also can't open the Play Store at all. I always get the "Unfortunately Google Play Store has stopped" message.
Once I rebooted the device I got a bootloop but it stopped after a while and now my Wi-Fi does not work anymore. I can turn it on but it doesn't find any networks and turns itself off after a few seconds.
I read that some models are just straight up broken. The serial number of my device is P1QRMW1HAR. I bought it a year ago or so and I had problems with bootloops all the time so I barely used the device and hoped for a firmware upgrade that would fix everything. Now my patience is about to run out and I really hope that someone knows how to fix this stupid China device...
ifve mini 4s not loading , FVF logo not booting
hii...i did the upgrade from 1.1.6c to 1.1.7c but is still have same problem ,the upgrade tool showed the upgrade is success my tablet restart three times but was unable to boot and getting the logo FNF,and when i turn off for many houres and turn it on iam getting this message.
E:failed yo mount. /mnt/external_sd (no such device )
E:failed yo mount. /mnt/external_sd (no such device )
Supported API : 3
--wiping data...
Formatting /data...
:silly: it was more text but it disappeared quickly.
pls some help
UnknownDK said:
ifive_mini_4S_US_1.0.6_20170330
Click to expand...
Click to collapse
Hello,I find "ifive_mini_4S_US_1.0.6_20170330" for a long time,can you share it with me？my email:[email protected],THANKS!