Related
can somebody help me update my t-Mobile XDA? i messed up my phone once already and know i keep getting error 112 during first step in update. CE Erase fails according to the log. Something is clearly locked, but I don't know what i am doing wrong or forgetting. I don't think t-mobile will restore my phone a second time. please help. I have tried diamondv1.2, wm2005, wm2003se, nothing seems to work.
UPDATE: sorry wrong categorie
not sure if that last big is a signature or a real confusement if so then
you cant use rom from one device on another so i would make pretty damm sure which device i had before trying to flash in worst case you can ruin the device 100%
i checked the requirements, so that should be ok. i just keep getting that same error 112, like something is locked. i haven't been able to find out what the error means. any tips?
and the update software i used checks if the device is right...
perhaps some more details:
if i connect it to my charger it will say serial, unless i pull the plug out a bit, then it will say usb.
if i connect to my pc via usb it will say usb v1.00, but after a while this will disappear and the RED light will go on
I have tried flashing it, but since activesync does not see it as a pocketpc anymore, i can't flash.
i have read a 100 posts by now, but i have not found any solutions.
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
put the phone in bootloader and tell me exactly what it says there.
jjb007 said:
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
Click to expand...
Click to collapse
I can't help with the active sync problem (you don't have vista, do you?) but as for flashing...flash from the sd card http://forum.xda-developers.com/showthread.php?t=336158
P1Tater said:
put the phone in bootloader and tell me exactly what it says there.
Click to expand...
Click to collapse
excuse my noobness , but im not sure what that means
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
OK, with the phone powered on, press and hold the camera button and insert the stylus in the reset hole until the tri-colored screen comes up. This is bootloader. Tell me what it says there, exactly.
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
After you put your phone in bootloader mode as P1 said, you will see something like this:
KAIS1*0
SPL-1.93.0000
CPLD-8
Once you make a record of what is displayed, reply back with it.
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
jjb007 said:
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
Click to expand...
Click to collapse
Since you already have it in the boot loader just keep it there and try to flash it, see if you get any errors that way.
What version of Windows is on your computer?
If your running vista you need the mobile device center, not activesync.
Im using windows XP, I will try flashing while it is in bootloader, I edit my post once I see if it is successful or not.
**It did not work when I tried flashing from the bootloader screen, I got the same error
which rom are you flashing your device with?
I am trying to flash Dutty's newest ROM, and right now Dutty's 3rd or 4th newest one is on my phone.
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
XtreMe_G said:
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
Click to expand...
Click to collapse
Yea, I dont see either of those in my device manager...
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
GSLEON3 said:
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
Click to expand...
Click to collapse
Alrighty... so how do I go about doing that?
jjb007 said:
Alrighty... so how do I go about doing that?
Click to expand...
Click to collapse
You use google or XDA search via google. Try ROM flashing with Vista, etc...
Remember, there is a lot of valid data in Hermes forum as well
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
ptgptg said:
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
Click to expand...
Click to collapse
Thanks for the input... im going to try re-installing windows when I get the chance and hopefully that will clear up this driver issue.
rather than going through all the trouble trying to solve this problem, i would just flash using the microsd card
So let me start by saying I have been researching these forums for the last 8 hours trying to following instructions on getting my phone to connect to my computer and with no luck, hoping someone out there can please help me step by step in correcting my problem.
1)I flashed DC's Rom, then flashed the most current radio, then flashed the most current Wimax.
2)I noticed that when I connect my phone to the computer, it says device is not recognizable. The phone charges but does cannot be seen by the computer as a disk drive (I'm trying to RUU to stock but the comp. will not see my phone and I've already tried running RUU but it also is having probs seeing the phone).
3)I've read Calculin's instructions in fixing the SD Card and USB as close as possible but also no luck. I've downloaded Android-SDK Tools and ran CMD with the Instructions saying type in "fastboot oem boot", from there, thats where I get stuck, it just says "waiting on device". Not sure where I go from there, I'm in Reboot mode where it has Fastboot on my evo screen.
Any help would be much appreciated, I'm just so frustrated and I'm trying to get back to square one.
Unplug your phone and restart it, then plug it back in. I had to do this 3 times before it started working again. Other than that, you might just need to download the new drivers.
And you posted in the wrong section.
Sorry about posting in the wrong section, what drivers should I install, are you talking about the new HTC Sync Files or something else? Can you point in the direction to get these files?
okay, I think I'm getting close, I have a box thats popping up now thats trying to located the Device Driver the phone. It says "Failed" next to the line "MY HTC" Where can I download the necessary drivers for this phone?
faquedado said:
okay, I think I'm getting close, I have a box thats popping up now thats trying to located the Device Driver the phone. It says "Failed" next to the line "MY HTC" Where can I download the necessary drivers for this phone?
Click to expand...
Click to collapse
You should be able to get the proper drivers from either Sprint or HTC's web site. There are links on both sites. Also, when you install / reinstall the sync drivers make sure anti-virus is disabled. If the situation continues and you've tried everything else other folks suggested look at program permissions in your anti-virus program. I was having something similar and CA anti-virus was not letting the program start-up. I had to toggle it to "allow".
Good Luck.
Hello hello! Just looking for some help rooting my LG G2 (Verizon edition).
I'm trying to use the method posted by thecubed, which can be found here http://forum.xda-developers.com/showthread.php?p=45692679#post45692679
I have all of the drivers installed and the phone is recognized in the adb but whenever I run the root.bat file in adb I get the following errors:
Looking for device...
Error: protocol fault (status read)
Determining carrier...
Error: more than one device and emulator
GOTO was unexpected at this time
I've rebooted both my PC and phone, only have my phone plugged in via usb and am still getting these errors. Other posts have talked about these problems, but the solutions either didn't work or didn't seem to apply to this case. Any suggestions or pointers would be appreciated, hopefully this isn't the worst question in the world...
Cheers,
Rich
Hello
rcdurand said:
Hello hello! Just looking for some help rooting my LG G2 (Verizon edition).
I'm trying to use the method posted by thecubed, which can be found here http://forum.xda-developers.com/showthread.php?p=45692679#post45692679
I have all of the drivers installed and the phone is recognized in the adb but whenever I run the root.bat file in adb I get the following errors:
Looking for device...
Error: protocol fault (status read)
Determining carrier...
Error: more than one device and emulator
GOTO was unexpected at this time
I've rebooted both my PC and phone, only have my phone plugged in via usb and am still getting these errors. Other posts have talked about these problems, but the solutions either didn't work or didn't seem to apply to this case. Any suggestions or pointers would be appreciated, hopefully this isn't the worst question in the world...
Cheers,
Rich
Click to expand...
Click to collapse
Try this..... http://theunlockr.com/2010/10/11/how-to-root-your-android-phone-superoneclick-method/ ..... Just remember to follow all the instructions to the letter. Good luck!
Thanks for that, I'll give it a shot in the morning! Really getting frustrated with having the verizon update notification flashing in my face all the time, scared I might actually hit it one of these times!
Well the one click method didn't work either, continually gets stuck at starting server :/
rcdurand said:
Well the one click method didn't work either, continually gets stuck at starting server :/
Click to expand...
Click to collapse
What's the output of "adb devices"? For what it's worth, I had done the OTA first and was still able to root using this method.
I'm having the exact same issue with my AT&T G2. Did you ever get yours working?
rcdurand said:
Hello hello! Just looking for some help rooting my LG G2 (Verizon edition).
I'm trying to use the method posted by thecubed, which can be found here http://forum.xda-developers.com/showthread.php?p=45692679#post45692679
I have all of the drivers installed and the phone is recognized in the adb but whenever I run the root.bat file in adb I get the following errors:
Looking for device...
Error: protocol fault (status read)
Determining carrier...
Error: more than one device and emulator
GOTO was unexpected at this time
I've rebooted both my PC and phone, only have my phone plugged in via usb and am still getting these errors. Other posts have talked about these problems, but the solutions either didn't work or didn't seem to apply to this case. Any suggestions or pointers would be appreciated, hopefully this isn't the worst question in the world...
Cheers,
Rich
Click to expand...
Click to collapse
Issue with root file stuck
I follow the directions to root to the letter. I have repeated issue multiple times so I know there is some issue preventing this on PC or device.
I get to step of running the root batch file. CMD opens, press key to continue.
I get:
Looking for device...
* daemon not running. starting it now on port 5037*
* daemon started successfully*
_ --- then next line just blinks indefinitely.
This through standard driver software installation that pops up when device connected.
When phone was connected I selected "for internet" --> "Ethernet" as it is a Verizon LG G2 and I noticed someone had made that distinction in one set of instructions. When doing so, phone notes that "entering into USB Debugging" so I would be led to believe that is correct.
Any suggestions or thoughts on this? Have looked around and found nothing in terms of this issue on forums, nothing specific to this issue or similar to this. I have seen issues with those driver installations for other devices but the fix usually consisted of a toolkit for that devices root with the fix built in so little help there...HELP
you could try this, it's worked
http://theunlockr.com/2013/10/25/root-lg-g2-versions-video/
So you probably did something wrong trying to get a custom recovery or root on your FNF Ifive Mini 4s. Well I did too, that's why I'm writing this
WARNING: This will remove ALL files from your tablet.
Just follow these steps and your tablet should be back on track soon!
So first you have to download FNF Ifive's official upgrade tool which can be found here
Press on the latest one, which as of April 2 is called ifive_mini_4S_US_1.0.6_20170330 Upgrade Tool&Firmware.
Now download both files in the onedrive folder. One is the recovery tool and the other is the latest firmware.
Extract both to a folder of your choosing.
Enter the folder called Driver and run Driverinstall.exe as admin.
Press uninstall driver, press ok and press install driver.
Go back to the main folder and run FactoryTool.exe as admin.
Turn off your tablet.
Enter loadermode on your tablet by connecting it to your computer with the included cable and pressing the powerbutton and Vol-.
Click on "Firmware" in the FactoryTool.
Locate the .img file you downloaded and extracted.
Check the box called "Restore".
Click on "Run" and wait for it to say success.
After it says success you should disconnect the tablet from your computer and just wait for it to boot. This will take a few minutes.
Success! You have now fixed your bootloop and updated to the latest firmware if you did not have it already!
If you had any problems I will be happy to help you
Error
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
TkMelter said:
Thanks for your help.
I tried it but it never end with "success". It says: "Wait for loader fail".
I don't know what I don't have to do.
Click to expand...
Click to collapse
That is probably because you are doing something wrong when entering loadermode or because you forgot to first uninstall the driver and then install it. When entering loadermode you must make sure the tablet is connected to the pc with the application open and running. Then you turn it off, and enter loadermode by pressing the power button and volume down simultaneously.
Hope this helps
Worked!!
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
TkMelter said:
Many thanks.
I manage to get the tablet working. I tried many times and I finally get it to work.
Sry for my bad English.
Click to expand...
Click to collapse
I'm happy it worked
Hello.
And for mac users? How can we do it?
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
gabrielpardal said:
Hello.
And for mac users? How can we do it?
Click to expand...
Click to collapse
The tool only works for windows.
JOAOFRS said:
version 1.06, when I update play serviices and reboot, boot loop begins. how can i fix?
Click to expand...
Click to collapse
By using this tutorial.
Hi,
I successfully upgraded the firmware, it says Build Number ifive_mini_4S_1.0.8-W in my settings but my device still doesn't work properly. The message "Unfortunately Google Play Store/services has stopped" pops up frequently and the boot screen sometimes shows up out off nowhere closing all my apps and locking the device. I also can't open the Play Store at all. I always get the "Unfortunately Google Play Store has stopped" message.
Once I rebooted the device I got a bootloop but it stopped after a while and now my Wi-Fi does not work anymore. I can turn it on but it doesn't find any networks and turns itself off after a few seconds.
I read that some models are just straight up broken. The serial number of my device is P1QRMW1HAR. I bought it a year ago or so and I had problems with bootloops all the time so I barely used the device and hoped for a firmware upgrade that would fix everything. Now my patience is about to run out and I really hope that someone knows how to fix this stupid China device...
ifve mini 4s not loading , FVF logo not booting
hii...i did the upgrade from 1.1.6c to 1.1.7c but is still have same problem ,the upgrade tool showed the upgrade is success my tablet restart three times but was unable to boot and getting the logo FNF,and when i turn off for many houres and turn it on iam getting this message.
E:failed yo mount. /mnt/external_sd (no such device )
E:failed yo mount. /mnt/external_sd (no such device )
Supported API : 3
--wiping data...
Formatting /data...
:silly: it was more text but it disappeared quickly.
pls some help
UnknownDK said:
ifive_mini_4S_US_1.0.6_20170330
Click to expand...
Click to collapse
Hello,I find "ifive_mini_4S_US_1.0.6_20170330" for a long time,can you share it with me？my email:[email protected],THANKS!