Development thread for d2202/12 devices. LTE variant users do not install.
Update #2(latest): http://forum.xda-developers.com/showpost.php?p=65322607&postcount=166
Old package: http://forum.xda-developers.com/showpost.php?p=64800292&postcount=52
Instructions:
Wipe data
Flash rom
Reboot
Flash gapps(optional)
Bugs:
-nfc
hell_lock said:
Hey guys! I have compiled cm11 from sources for d2203 users only. Its my first build and since I don't own a d2203 so I have to depend upon you guys for testing it.
I have made no changes in the source code. This is a clean build.
Once this works out, I'll port the device trees for d2202/12 users and support all the variants afterwards..
Here's the link: https://www.androidfilehost.com/?fid=24052804347794256
Keep a backup before flashing it.
Report me what works/doesnt work.
Click to expand...
Click to collapse
I'm testing on D2203
According to my testers.. The rom is stable on d2203. Next build will be only for d2202 users.
hell_lock said:
According to my testers.. The rom is stable on d2203. Next build will be only for d2202 users.
Click to expand...
Click to collapse
Rom quite stable with battery consumption well above the UI of Sony with stamina mode. The speakerphone during a call does not work and in some moments it can happen after you apply a theme restart suddenly
D2202 users should try flashing the rom with this kernel: https://www.androidfilehost.com/?fid=24052804347794840
entony80 said:
Rom quite stable with battery consumption well above the UI of Sony with stamina mode. The speakerphone during a call does not work and in some moments it can happen after you apply a theme restart suddenly
Click to expand...
Click to collapse
really? how is the standby battery drain in yours? my phone's battery is being drained with an average rate of 2% per hour. compared to stock which is 0.3% per hour which is significantly lower than using CM11.
noobAKO said:
really? how is the standby battery drain in yours? my phone's battery is being drained with an average rate of 2% per hour. compared to stock which is 0.3% per hour which is significantly lower than using CM11.
Click to expand...
Click to collapse
The exhaust of Cm11 is higher for me, I prefer the stock rom with the kernel Vinary and mode stamina active is really great for me
entony80 said:
The exhaust of Cm11 is higher for me, I prefer the stock rom with the kernel Vinary and mode stamina active is really great for me
Click to expand...
Click to collapse
both AOSP and CM roms for d2203 have insane idle battery drain. I thought I am the only one experiencing it. gonna use this rom until I find the culprit.
D2212 and D2202 test Cynogenmod.
this is third build of our cyngenmod 11 non LTE
RIL should be working.
report bug,s
--deleted--http://www.mediafire.com/download/l451pg8412l9c5a/cm-11-20150912-UNOFFICIAL-flamingo.zip
use it at your own risk i would,t be responsible for bricked devices.
------------------EDIT--------------
the Hybrid that was made for this rom
https://forum.xda-developers.com/showpost.php?p=64830587&postcount=78
cm11 update
D2212/D2202
----deleted---http://www.mediafire.com/download/9aa2p3879eammas/cm-11-20150919-UNOFFICIAL-flamingo.zip
updated propensity files and added missing lib,s.
and updated wifi drivers
for flashing
wipe data and cache
flash zip
reboot system
vinay said:
cm11 update
D2212/D2202
http://www.mediafire.com/…/cm-11-20150919-UNOFFICIAL-flamin…
updated propensity files and added missing lib,s.
and updated wifi drivers
for flashing
wipe data and cache
flash zip
reboot system
Click to expand...
Click to collapse
vinay link is not working,
and is camera working in this new update?
himfa71 said:
vinay link is not working,
and is camera working in this new update?
Click to expand...
Click to collapse
fixed link.
camera is not working.
vinay said:
fixed link.
camera is not working.
Click to expand...
Click to collapse
Why camera not working ?? There is one cm11 for e3 and there camera works ?
#Vangreen said:
Why camera not working ?? There is one cm11 for e3 and there camera works ?
Click to expand...
Click to collapse
this is for D2212/D2202 not supported by FXP..
Any chance to fix camera ?
vinay said:
this is third build of our cyngenmod 11 non LTE
RIL should be working.
report bug,s
http://www.mediafire.com/download/l451pg8412l9c5a/cm-11-20150912-UNOFFICIAL-flamingo.zip
use it at your own risk i would,t be responsible for bricked devices.
Click to expand...
Click to collapse
zip package is corrupted
rahulkapadiya1 said:
zip package is corrupted
Click to expand...
Click to collapse
No it is not.
Just found this thread a couple of days ago, I've been testing the ROM ever since on my D2212. Here's my thoughts:
-light, fast ROM
-Unfortunately no APP to SD card functional.
-No problems with battery
-Camera not working
-Networking and WiFi work fine.
I liked this ROM quite a bit, a lot of potential here, hope development for it continues.
vinay said:
No it is not.
Click to expand...
Click to collapse
When I flash using twrp it says zip package is corrupted on d2212 e3 dual . I also tried second update by you named cm-11-20150919-UNOFFICIAL-flamingo . It also shows error executing updater binary in zip
rahulkapadiya1 said:
When I flash using twrp it says zip package is corrupted on d2212 e3 dual . I also tried second update by you named cm-11-20150919-UNOFFICIAL-flamingo . It also shows error executing updater binary in zip
Click to expand...
Click to collapse
you can flash it after wiping /data
Related
Hey,
This is a continuation from jjm34's version of CyanogenMod 10 with Dual SIM with a few bug fixes and changes.
Current Version : v1.1.0a 20/11/2013
Status : Alpha
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual : http://sourceforge.net/projects/nanhu-cm/files/nanhu_ds/1.1.0/
This ROM is completely based off jjm34's CM10(dual) build, hence complete credits to him for his contribution.
However a few modifications have been/are being made to kernel/ROM in order to improve user experience.
The ROM has been personally tested on my C1604 and is fit for essential use.
The is reported to be working on Xperia E single sim versions without any modifications also!
Click to expand...
Click to collapse
Features
Based on CM10 (AOSP 4.1.2)
Stable Overclock to 1.3GHz
Working Sensors(including magnetometer)
Dual SIM implementation
Works on Xperia E Single Sim Also
OTA updates supported
Non-stock CPU governors available
Installation
The ROM is currently in Alpha stage, it suggested that you charge to battery to over 50% and have a backup of your data before flashing this release
Install stock Jellybean firmware (11.3.A.2.1) since the ROM is based off that and hence requires those baseband firmwares.
Boot into recovery.
If you do not possess any recovery, check this thread http://forum.xda-developers.com/showthread.php?t=2505811
Flash the cm-nanhu_ds-ota-{version}.zip
Do a factory reset (data/cache)
(Optional) Flash Google Apps for 10.0.x from here http://goo.im/gapps
Reboot
Initial start up might take a while since the system might be caching up resources
GPL Compliance
Kernel Source : https://github.com/hsr0/android_kernel_sony_msm7x27a
Device Source Files : https://github.com/hsr0/android_device_sony_nanhu_ds
Note : The source is compiled using files from jjm34's source code modification, hence use this repo manifest https://github.com/der-koenig/repo_manifests and replace device and kernel files with the above mentioned.
Issues
Video Encoding Not Working
NOTE : Since this is a community project, it is requested that you report any issue you may find along with logcat/dmesg/last_kmsg logs
Error Reporting
Send a logcat of the phone while rebooting/while the error occurs
Enable Developer Tools -> USB Debugging
Download and extract this debugging toolkit : https://sourceforge.net/projects/nanhu-cm/files/debugging/
Run install.bat and upload the logs here.
Troubleshooting/FAQ
Video playback does not seem to work!
Upgrade to v1.0.1 or higher!
My phone seems to be overheating quite quickly!
This maybe due to the overclock feature and intensive usage, you can reduce the clock speed to improve stability!
Go to Settings -> Perfomance -> Processor -> Max CPU Frequency
Chose any of the given frequencies between 1008 MHz to 1305 MHz (1008 MHz is stock max frequency)
Change the governor to OnDemand/Powersave or Conservative
Does this work on Xperia E Single Sim?
Yes, it has been found to be stable with any major issues as of now!
How do I use the Dual Recovery!
Booting into TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
Booting into CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
How do I use SmartAssV2 Governor!
Go to Settings -> Perfomance -> Processor
Click CPU Governor
Select SMARTASSV2
Credits
jjm34 for his work on the dual sim implementation
FXP for the initial configurations
CyanogenMod Team for their ROM
CodeAurora for their dual sim implementation
Change Log
v1.0.0a 09/11/2013
Overclock to 1.3GHz
Fixed Magnetometer
v1.0.1a 15/11/2013
Fixed Video Playback issues
Added support for OTA updater
v1.1.0a 20/11/2013
First OTA update
Dual Recovery Support (see Troubleshooting/FAQ #4)
SmartAssV2 Governor added! (see Troubleshooting/FAQ #5)
NOTE: You need to be on v1.0.1 for the OTA update/incremental update patch to work!
good work buddy.. will try it ASAP
download link fixed
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Abadguy10 said:
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
yea, it's an issue carried over from the initial release
you can temporarily fix using
Settings, development tools, disable hw overlay(On)
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Hoshar said:
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Click to expand...
Click to collapse
Flash through CWM
Ever make a backup
Good job bro... :good:
Was wondering when CM10 for E dual will be continued with bugs fixed...
Btw, any screenshots please??!
Keep it up :highfive: :good:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
did you clear data and cache after flashing the ROM?
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
Flashed it through CWM and now it works, thanks man :good:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
mathewsj114 said:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Click to expand...
Click to collapse
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
mathewsj114 said:
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Click to expand...
Click to collapse
There is some issue with hardware encoding which causes both the issues, there is some issue with memory management and encoding.
I'm looking into it.
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
Click to expand...
Click to collapse
Try clearing data or uninstall and then reinstall, TB shows this error when it does not get root permission in its initial run.
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
Click to expand...
Click to collapse
It's an issue i have experienced in the stock ROM also since ICS builds, it shows a large drop during heavy usage and then rises when idle.
Might be a battery sensor module issue, not sure though, but i doubt it's a bug with the ROM, maybe an issue with the kernel.
[/QUOTE]
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..[/QUOTE]
Good to know that
---
gbadcool said:
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
Click to expand...
Click to collapse
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
---
Hoshar said:
Flashed it through CWM and now it works, thanks man :good:
Click to expand...
Click to collapse
Good to know that it works.
---
Abadguy10 said:
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
Good to know
--
Thanks for the feedback, however i have been slightly busy this week and will possibly be busy for the rest of the week, however i'll try to look into video encoding issue.
Regards
hsr
Can you port this ROM for Xperia Tipo Dual Sim??? I liked very much your r:good:elease!
What about Xperia E single?
hsr0 said:
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
Regards
hsr
Click to expand...
Click to collapse
Thanks for reply, :good:
I think i stick with this without deodex...
TheXperiaE said:
What about Xperia E single?
Click to expand...
Click to collapse
There is fxp
Sent from my Xperia E dual using Tapatalk
gbadcool said:
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
Click to expand...
Click to collapse
OP modified with instructions for GApps
INSTALL CM10 ON XPERIA E SS WITH BUGFIXES
NOTE - UNLOCKED BOOT LOADER IS NEEDED
*NOOB GUIDE*
1. DOWNLOAD @jjm34 ROM: http://sourceforge.net/projects/cmk/files/nanhu/nanhu-CM10DS-0.8.1.36-ota.zip/download
2. PUT IT ON YOUR SD CARD.
3. GO INTO RECOVERY, IF YOU DON'T HAVE RECOVERY FOLLOW GUIDE HERE: http://forum.xda-developers.com/showthread.php?t=2276943
3. DO A WIPE/FACTORY RESET
4. NOW SELECT INSTALL ZIP FROM SDCARD, DEPENDING ON WHEREVER YOU PUT THE FILE, E.G. EXTERNAL OR INTERNAL STORAGE, SELECT THE CORRESPONDING ONE AND FLASH
5. NOW POWER DOWN AND DOWNLOAD THIS KERNEL, PUT IT INTO FASTBOOT FOLDER: https://drive.google.com/file/d/0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
6. HOLD SHIFT AND RIGHT CLICK INTO THE FASBOOT FOLDER AND SELECT OPEN COMMAND WINDOW HERE
7. IN THE COMMAND WINDOW TYPE: fastboot flash boot boot.img
8. YOU SHOULD NOW HAVE A WORKING ROM WITH MOST BUGFIXES
VIDEO RECORDING IS THE ONLY THING THAT DOES NOT WORK!
THANKS TO @jjm34 FOR THE ROM AND @hsr0 FOR HIS KERNEL, ALL CREDIT GOES TO THEM!
Works Perfect ! Good Job man !
DanielFlorin said:
Works Perfect ! Good Job man !
Click to expand...
Click to collapse
Hit the Thanks Button If I Helped!
Doubt
No network bug detected with this combination?
bg.shishir said:
No network bug detected with this combination?
Click to expand...
Click to collapse
Yes no Network Bug in this Method!
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
can i onerclock it if yes please tell me how ??
harimmedayil1 said:
can i onerclock it if yes please tell me how ??
Click to expand...
Click to collapse
Yes, you can. Just go to Settings > Performance, read the message, if you're OK with it, tap OK. Open Processor, and set the Maximum CPU Frequency to whatever you want. Here's something:
600 Mhz or below: Underclock, will save battery life
1008 Mhz: Normal, like you get in stock ROM.
1036 Mhz or higher: Overclock, will increase performance.
Unfortunate surprise
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
bg.shishir said:
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
Click to expand...
Click to collapse
Confirmed by a lot of users that use this method that network bug is fixed, if you go into settings --> About Phone and Under Baseband it says unknown then flash latest stock jellybean ftf and do this process again.
Sent from my C1605 using Tapatalk
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
harimmedayil1 said:
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
Click to expand...
Click to collapse
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
NSDCars5 said:
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
Click to expand...
Click to collapse
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
harimmedayil1 said:
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
Click to expand...
Click to collapse
Ah, you have my issue. Same happens with me. Just flash this boot.img: https://drive.google.com/file/d/0B7...0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
Not working
Flashed 2 times already. Still getting the network bug after 2 days of use. This is so annoying
I flashed latest stock (11. something ) and then did exactly as you said. I have c1504.
I personally think this has something to do with Viper sound engine. Because few weeks back I had installed hsr's cm and it worked perfectly for 10-15 days. The day I installed viper, that network bug came back. This is only a guess btw. I had viper, vine and instagram installed on my phone this time.
Any suggestions?
thanks using your rom currently
this one is the most stable available rom for xperia E right?
XperiaEss said:
thanks using your rom currently
this one is the most stable available rom for xperia E right?
Click to expand...
Click to collapse
Well, other than stock, yes, it is. And NoZ and XboosT (but both of those are stock-based anyway).
yes,seen those, noz is the ultimate show off rom (I'm not into it)
xboost i wanted to try ,but the instructions were too rough and too many downloads ,if there was like ,two zips i would have tried by now
the unexpected thing i found while using this rom was that it has cwm & twrp .....not sure where i got them but i like it
i want to know how this version is different from jim34 & hsr0 cm10 rom :cyclops:
Hi,
I decided to update this thread with separate E/E dual links, plus some extra instructions
You'll need an unlocked bootloader for this action. Unlocking the bootloader will result in warranty loss. I will not be held responsible for anything that may or may not happen to your device.
What is the point of this thread? Well, this thread offers you a CM10 for our E with the baseband uknown(SIM not recognized issue) that randomly occurs after a couple reboots(some people like me get it in 3 days, others have never got it).
This CM10 was an update by @jjm34 (OTA 1.1.0). Member @Johnt880 discovered that this update brings a stable baseband. All credits go to him! I merely created E single and E dual versions and Deodexed them! I also replaced the boot.img with @UltraGamerHD his Hades kernel, so you'll get 1,5 gHz OC and some other stuff.
The bugs of this CM10 are:
-Magnetomet not working(no automatic landscape/portrait)
-Video recording doesn't work.
-Video playback doesn't work(no YouTube)
-Bluetooth acts strange(it connects, but refuses to exchange any kind of media)
As you can see that's pretty bearable.
Installation instructions:
1. Download the appropiate ROM for your device. Choose the Odexed or the Deodexed version(easier modding).
2. Download the Gapps(contains Play Store, so pretty important)
3. Place the 2 .zips on your SD card(internal or external, doesn't matter)
4. Flash the boot.img inside the ROM.zip. You can use Flashtool or the Android SDK.
5. Boot into your preferred recovery(TWRP is the most convenient). Blue LED=TWRP. Green LED=CWM.
7. When using TWRP: Wipe cache, dalvik-cache, data and system under ''Wipe'', ''Advanced wipe''
When using CWM: Wipe data(hard reset), wipe dalvik-cache(under ''advanced'') and format system
8. Install zip from SD card>CM10ROM.zip
9. When it's done, install zip from SD card>gapps.zip
10. Reboot system, insert PIN and enjoy your SIM recognized CM10
Little advice: CM10 doesn't give you the option to switch between Wi-Fi and 3G like stock does. So when you insert your G-mail and password, it will use precious data to establish a connection. If this is something you don't want to, just skip the G-mail, skip the creation of a G-mail, and go to ''Settings''>''More''>''Mobile Networks'' and uncheck the data. Now you can enable Wi-Fi and open the Play Store. You will have to insert a G-mail and now you can since you have a wi-fi connection
Downloads:
E single:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhteURaWS1OcDBhWE0/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtZVFmaUtQVmZ3ZFE/edit?usp=sharing
E dual:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhtdy1QS2puMEFadlk/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtOUJBSjVLXzl5Ym8/edit?usp=sharing
Gapps: https://drive.google.com/file/d/0B6-n6J0wUrhtc0VZVE1ySHBkb0k/edit?usp=sharing
Credits:
@Johnt880 for the discovery of the update.
@UltraGamerHD for his Hades kernel.
@jjm34 for the actual ROM
Thanks for this dude!
TheRealSS said:
Thanks for this dude!
Click to expand...
Click to collapse
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Video recording not working ...
MatsPunt said:
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wait, so isn't this just jjm34's rom with hsr0's kernel?
TheRealSS said:
Wait, so isn't this just jjm34's rom with hsr0's kernel?
Click to expand...
Click to collapse
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
MatsPunt said:
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, okay, I get it.
Links are Down @MatsPunt!
TheRealSS said:
Oh, okay, I get it.
Click to expand...
Click to collapse
To be absolutely sure(sorry..)
jjm34 and hsr0 both built a CM10 ROM.
We discovered that jjm34's ROM+hsr0's kernel s the most stable for the E single.
BUT on jjm34 his sourceforge page for the E single is an update of 150 mb.
Now, when you are on jjm34 his ROM and hsr0 his kernel, you may experience the SIM bug.
Flashing the update will solve this. When it happens again, just flash the update.
Note: remove the apks in the update that you deleted in the base ROM. Otherwise you will get those apps again. Also, when you modify anything you have to add the files to the update too! Otherwise the system wll be overwritten with stock CM10 and your mods will disappear.
Hope that it's now completely clear! Correct download links will be up in 10 minutes.
Mats
UltraGamerHD said:
Links are Down @MatsPunt!
Click to expand...
Click to collapse
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
MatsPunt said:
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
Click to expand...
Click to collapse
No probs, What are the .zip files anyway are they @jjm34 revised 0.8.1.36 versions of cm10 or what?...... explain?
Allright, links are up. Have fun playing with CM10
Mats
I am sorry for misleading anyone , I just never thought of testing the video,I tested camera and panoramic as they worked. I assumed the video would too
Anyway keep up the good work Many thanks
Wait.. camera and panaroma? Those work, it's only video recording.
@Johnt880 No problems, you are now in my list of people whom I like a lot! By a lot, I mean I'd be star-struck if I met you.
Thank you very much
Is this the full rom?? 155mb? thats a big size for a baseband fix....if its a full rom...this should be advertised as the new cm10 rom for E
---------- Post added at 08:09 AM ---------- Previous post was at 08:07 AM ----------
DanielFlorin said:
Video recording not working ...
Click to expand...
Click to collapse
just a gsm fix dude.....
before, if you get this bug you had to flash stock ftf again & then cm10 @MatsPunt someone said flashing xboost (rom only) also fixes the problem..
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
DanielFlorin said:
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
Click to expand...
Click to collapse
The problems won't come at once; after some time, you'll get it.
For three weeks I had the problem with GSM
DanielFlorin said:
For three weeks I had the problem with GSM
Click to expand...
Click to collapse
I get it roughly once a month; that's once every four-five weeks.
Feel free to discuss non-development-related topics here or ask any questions.
Olivier said:
Feel free to discuss non-development-related topics here or ask any questions.
Click to expand...
Click to collapse
I have a bug in this ROM. The phone switches off completely. Randomly. And it doesnt switch on unless i remove and re insert the battery. Couldnt get a log cat as this happened so very randomly. I have no idea of when this happens.
I am using VanirAOSP and the kernel by varun including philZ recovery.
srcharged said:
I have a bug in this ROM. The phone switches off completely. Randomly. And it doesnt switch on unless i remove and re insert the battery. Couldnt get a log cat as this happened so very randomly. I have no idea of when this happens.
I am using VanirAOSP and the kernel by varun including philZ recovery.
Click to expand...
Click to collapse
That's not my bug then. If you flash amother boot.img, you also reflash the ramdisk.
Gesendet von meinem Xperia S mit Tapatalk
I'll post the bug in that kernel page then. Thank you!
srcharged said:
I'll post the bug in that kernel page then. Thank you!
Click to expand...
Click to collapse
I didn't mean that. I meant that you cannot just use the CM ramdisk instead of Vanir's (it may cause unintended problems).
For new build, setting fc's when entering 'more' tab for adjusting vibration intensity..
In call volume
is the in call low volume problem persist in this rom... plz reply asap??
First great rom, great performance. Looking forward to officially support for our phone.
Second I have for now two problems. As said from user faizalotai bug in settings after clicking 'more'.
And after restart I have problems with lockscreen . It freezes my phone for a minute but after that every thing is normal.
Sent from my Xperia L using Tapatalk
warriorwithin1987 said:
is the in call low volume problem persist in this rom... plz reply asap??
Click to expand...
Click to collapse
Yes
Sharful said:
Yes
Click to expand...
Click to collapse
any fix???
Sent from my C2104 using Tapatalk
Since Vanir is all about speed and stability is there any chance you could apply JustArchi's speed optimisations?
http://forum.xda-developers.com/showthread.php?t=2754997
I've Flashed this rom yesterday... Only 2 bugs I've saw...
Settings>device>more gives fc...
And sometimes when I lock the screen the power button doesn't work to unlock my phone... I have to wait almos 30 seconds...
It's only my phone or a general bug??
Thanks...
Yep, ive also experienced that lag during unlock.
Ive encountered similar lag with RR 5.1.2, but i solved it when someone suggested me to flash Graphical fix, sadly, that wasnt the case with latest version of Vanir :/
dante. said:
Yep, ive also experienced that lag during unlock.
Ive encountered similar lag with RR 5.1.2, but i solved it when someone suggested me to flash Graphical fix, sadly, that wasnt the case with latest version of Vanir :/
Click to expand...
Click to collapse
i had the same issue with cm11 fxp325 as well. Maybe its related to all kitkat roms for XL
anyone having fps drop while scrolling through home screen or settings?? Scrolling doesnt seem to be smooth as other kitkat roms
helo123 said:
anyone having fps drop while scrolling through home screen or settings?? Scrolling doesnt seem to be smooth as other kitkat roms
Click to expand...
Click to collapse
Can anyone confirm please
It works fine for me...
Sent from my C2104 using XDA Free mobile app
OTA Updates
Greetings friends. Can someone explain how to properly configure the OTA updates. Whenever I detect a new update I have to completely download the new zip file. Thank you very much.
i m running my xperia l on parralax rom with cwm v6.0.4.8, yesterday i tried to flash the vanir rom but it shows (Status 7) Installation aborted
Can anyone tell how do i intall it plzzzzz..???
JayPanchal14 said:
i m running my xperia l on parralax rom with cwm v6.0.4.8, yesterday i tried to flash the vanir rom but it shows (Status 7) Installation aborted
Can anyone tell how do i intall it plzzzzz..???
Click to expand...
Click to collapse
Possible solutions:
1. Flash the included boot.img from the Vanir zip via flashtool.
2. Redownload the rom and check the MD5.
3. Wipe system, data, cache & dalvik cache.
Send from OnePlus One using Tapatalk
Hi Guys,
Its a great news for those who want to install MIUI on their LE2X526. Until now, we have been facing low brightness issue with almost all the MIUI roms we had installed till date except one which was a little buggy when applying darker themes and recent apps.
But now, the latest release of AndroModX Kernel(V2) which had been developed by Rishabh Rao can solve this issue. I had installed MIUI Russian official version and along with it, installed AndroModX V2 kernel just to test it out. I had installed the same rom earlier but had uninstalled it due to low brightness issue which was too much strain on eyes and is totally non visible in daylight.
But with AndromodX Kernel, right after the first boot up, the screen was even brighter than EUI stock rom and every thing was working just fine. Even battery backup seems to have improved drastically. In the course of 1hour 30 minutes that I used MIUI Official Russian rom with AMX Kwernel, battery dropped just 5%.
I was at 79% when I started working on the rom with 4G network on and I put the screen on highest brightness level which was very very bright. Sync was on, download was on at full speed, music playing in the backgroud & I was browsing.
If any one like to use MIUI on their LE2X526, try it alongside AMX Kernel. Preferably use Russian Version of MIUI coz it does not have any chinese blotware. Or you can try the kernel with any other version of MIUI. Your choice.
XDA Link to Rishab Rao's AMX Kernel: https://forum.xda-developers.com/le-2/development/andromodx-kernel-t3529576
Link for Russian Official Ported MIUI for LE2(Snapdragon Varient): https://miui.su/firmware_manager/model_view/369/
(MIUI Installation might take some time as the script will show "Waiting for System: resource busy" for some time. But it will complete the flashing none the less.
Then install the Kernel.
Done.
Happy flashing.
Buddy do have the link to install gapps for miui russian version
And Thanks for sharing the info
Do we need to flash gapps. And VoLTE working? One more thing, is it smooth enough to use it as s daily driver!
Njishi said:
Do we need to flash gapps. And VoLTE working? One more thing, is it smooth enough to use it as s daily driver!
Click to expand...
Click to collapse
It has gapps i cant test volte cuz my sim has no support to volte
Sent from my le_s2 using XDA Labs
dungos said:
Buddy do have the link to install gapps for miui russian version
And Thanks for sharing the info
Click to expand...
Click to collapse
Gapps is already installed in the ROM. And you are welcome. Just shared an info I came across, tested and succeeded.
senseijtitus said:
Gapps is already installed in the ROM. And you are welcome. Just shared an info I came across, tested and succeeded.
Click to expand...
Click to collapse
Help i cant open setting suddenly
Sent from my le_s2 using XDA Labs
Yes its working and battery timing improved a lot too. Just to add, need to flash EUI-Andromax2 for the fix.
Buddy.. After clean flashing. It's booting into recovery every time rather than booting into system. What should i do?
senseijtitus said:
Hi Guys,
Its a great news for those who want to install MIUI on their LE2X526. Until now, we have been facing low brightness issue with almost all the MIUI roms we had installed till date except one which was a little buggy when applying darker themes and recent apps.
But now, the latest release of AndroModX Kernel(V2) which had been developed by Rishabh Rao can solve this issue. I had installed MIUI Russian official version and along with it, installed AndroModX V2 kernel just to test it out. I had installed the same rom earlier but had uninstalled it due to low brightness issue which was too much strain on eyes and is totally non visible in daylight.
But with AndromodX Kernel, right after the first boot up, the screen was even brighter than EUI stock rom and every thing was working just fine. Even battery backup seems to have improved drastically. In the course of 1hour 30 minutes that I used MIUI Official Russian rom with AMX Kwernel, battery dropped just 5%.
I was at 79% when I started working on the rom with 4G network on and I put the screen on highest brightness level which was very very bright. Sync was on, download was on at full speed, music playing in the backgroud & I was browsing.
If any one like to use MIUI on their LE2X526, try it alongside AMX Kernel. Preferably use Russian Version of MIUI coz it does not have any chinese blotware. Or you can try the kernel with any other version of MIUI. Your choice.
XDA Link to Rishab Rao's AMX Kernel: https://forum.xda-developers.com/le-2/development/andromodx-kernel-t3529576
Link for Russian Official Ported MIUI for LE2(Snapdragon Varient): https://miui.su/firmware_manager/model_view/369/
(MIUI Installation might take some time as the script will show "Waiting for System: resource busy" for some time. But it will complete the flashing none the less.
Then install the Kernel.
Done.
Happy flashing.
Click to expand...
Click to collapse
Hi, I have flashed the Russian ROM n eui amx2. It works, brightness solved but phone softboot frequently n sometimes network goes off suddenly.
Is there any solution for this?
Njishi said:
Buddy.. After clean flashing. It's booting into recovery every time rather than booting into system. What should i do?
Click to expand...
Click to collapse
Wipe cache, device, data & system. Then flash MIUI first. After that, immediately flash and kernel. Then go to wipe and factory reset. Then reboot to system.
tumonh said:
Hi, I have flashed the Russian ROM n eui amx2. It works, brightness solved but phone softboot frequently n sometimes network goes off suddenly.
Is there any solution for this?
Click to expand...
Click to collapse
I had not faced that issue. But I think, you can flash eui19s modem over it. This may solve the issue.
DarknessKiller said:
Help i cant open setting suddenly
Click to expand...
Click to collapse
Do s factory reset and relboot.
volte not working for me, please confirm if its working?
Should we use eui andro mod x or lineage one for brightness fic
Do you mean that the brightness slider and VoLTE are working?
brighness issue is solved after flashing kernel but volte is not working
senseijtitus said:
Wipe cache, device, data & system. Then flash MIUI first. After that, immediately flash and kernel. Then go to wipe and factory reset. Then reboot to system.
Click to expand...
Click to collapse
No luck... Did everything! Wiping formatting! I am using TWRP, is it causing any problem?
I must thanks，because you fix mu port miui8 Low Brighness， can i use it for my port MIUI8 to my users？
ycjeson said:
I must thanks，because you fix mu port miui8 Low Brighness， can i use it for my port MIUI8 to my users？
Click to expand...
Click to collapse
Its just bcoz of andromodx kernel developed by beloved rishab rao.
You can ask him either.
zeetwo-raj said:
Its just bcoz of andromodx kernel developed by beloved rishab rao.
You can ask him either.
Click to expand...
Click to collapse
can you give me beloved rishab rao's email？