Hi,
I decided to update this thread with separate E/E dual links, plus some extra instructions
You'll need an unlocked bootloader for this action. Unlocking the bootloader will result in warranty loss. I will not be held responsible for anything that may or may not happen to your device.
What is the point of this thread? Well, this thread offers you a CM10 for our E with the baseband uknown(SIM not recognized issue) that randomly occurs after a couple reboots(some people like me get it in 3 days, others have never got it).
This CM10 was an update by @jjm34 (OTA 1.1.0). Member @Johnt880 discovered that this update brings a stable baseband. All credits go to him! I merely created E single and E dual versions and Deodexed them! I also replaced the boot.img with @UltraGamerHD his Hades kernel, so you'll get 1,5 gHz OC and some other stuff.
The bugs of this CM10 are:
-Magnetomet not working(no automatic landscape/portrait)
-Video recording doesn't work.
-Video playback doesn't work(no YouTube)
-Bluetooth acts strange(it connects, but refuses to exchange any kind of media)
As you can see that's pretty bearable.
Installation instructions:
1. Download the appropiate ROM for your device. Choose the Odexed or the Deodexed version(easier modding).
2. Download the Gapps(contains Play Store, so pretty important)
3. Place the 2 .zips on your SD card(internal or external, doesn't matter)
4. Flash the boot.img inside the ROM.zip. You can use Flashtool or the Android SDK.
5. Boot into your preferred recovery(TWRP is the most convenient). Blue LED=TWRP. Green LED=CWM.
7. When using TWRP: Wipe cache, dalvik-cache, data and system under ''Wipe'', ''Advanced wipe''
When using CWM: Wipe data(hard reset), wipe dalvik-cache(under ''advanced'') and format system
8. Install zip from SD card>CM10ROM.zip
9. When it's done, install zip from SD card>gapps.zip
10. Reboot system, insert PIN and enjoy your SIM recognized CM10
Little advice: CM10 doesn't give you the option to switch between Wi-Fi and 3G like stock does. So when you insert your G-mail and password, it will use precious data to establish a connection. If this is something you don't want to, just skip the G-mail, skip the creation of a G-mail, and go to ''Settings''>''More''>''Mobile Networks'' and uncheck the data. Now you can enable Wi-Fi and open the Play Store. You will have to insert a G-mail and now you can since you have a wi-fi connection
Downloads:
E single:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhteURaWS1OcDBhWE0/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtZVFmaUtQVmZ3ZFE/edit?usp=sharing
E dual:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhtdy1QS2puMEFadlk/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtOUJBSjVLXzl5Ym8/edit?usp=sharing
Gapps: https://drive.google.com/file/d/0B6-n6J0wUrhtc0VZVE1ySHBkb0k/edit?usp=sharing
Credits:
@Johnt880 for the discovery of the update.
@UltraGamerHD for his Hades kernel.
@jjm34 for the actual ROM
Thanks for this dude!
TheRealSS said:
Thanks for this dude!
Click to expand...
Click to collapse
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Video recording not working ...
MatsPunt said:
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wait, so isn't this just jjm34's rom with hsr0's kernel?
TheRealSS said:
Wait, so isn't this just jjm34's rom with hsr0's kernel?
Click to expand...
Click to collapse
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
MatsPunt said:
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, okay, I get it.
Links are Down @MatsPunt!
TheRealSS said:
Oh, okay, I get it.
Click to expand...
Click to collapse
To be absolutely sure(sorry..)
jjm34 and hsr0 both built a CM10 ROM.
We discovered that jjm34's ROM+hsr0's kernel s the most stable for the E single.
BUT on jjm34 his sourceforge page for the E single is an update of 150 mb.
Now, when you are on jjm34 his ROM and hsr0 his kernel, you may experience the SIM bug.
Flashing the update will solve this. When it happens again, just flash the update.
Note: remove the apks in the update that you deleted in the base ROM. Otherwise you will get those apps again. Also, when you modify anything you have to add the files to the update too! Otherwise the system wll be overwritten with stock CM10 and your mods will disappear.
Hope that it's now completely clear! Correct download links will be up in 10 minutes.
Mats
UltraGamerHD said:
Links are Down @MatsPunt!
Click to expand...
Click to collapse
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
MatsPunt said:
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
Click to expand...
Click to collapse
No probs, What are the .zip files anyway are they @jjm34 revised 0.8.1.36 versions of cm10 or what?...... explain?
Allright, links are up. Have fun playing with CM10
Mats
I am sorry for misleading anyone , I just never thought of testing the video,I tested camera and panoramic as they worked. I assumed the video would too
Anyway keep up the good work Many thanks
Wait.. camera and panaroma? Those work, it's only video recording.
@Johnt880 No problems, you are now in my list of people whom I like a lot! By a lot, I mean I'd be star-struck if I met you.
Thank you very much
Is this the full rom?? 155mb? thats a big size for a baseband fix....if its a full rom...this should be advertised as the new cm10 rom for E
---------- Post added at 08:09 AM ---------- Previous post was at 08:07 AM ----------
DanielFlorin said:
Video recording not working ...
Click to expand...
Click to collapse
just a gsm fix dude.....
before, if you get this bug you had to flash stock ftf again & then cm10 @MatsPunt someone said flashing xboost (rom only) also fixes the problem..
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
DanielFlorin said:
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
Click to expand...
Click to collapse
The problems won't come at once; after some time, you'll get it.
For three weeks I had the problem with GSM
DanielFlorin said:
For three weeks I had the problem with GSM
Click to expand...
Click to collapse
I get it roughly once a month; that's once every four-five weeks.
Related
Hey,
This is the modified kernel with TWRP 2.6.0.0 and CWM as a dual recovery option.
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual (C1604) : http://d-h.st/kSk
This is just a modified version of stock jellybean kernel 11.3.A.2.1, it contains TWRP v.2.6.0.0 and CWM. It does not contain any other modification. This kernel has been tested on Sony Xperia E Dual(C1604) running 11.3.A.2.1 jellybean firmware, so far there have been no issues.
Click to expand...
Click to collapse
Instructions
Installation
Flashing a kernel may require an unlocked bootloader which may result in voiding your device's warranty
Guide to Flashing Kernel via Flashtool (follow for unlocked bootloader only) : http://forum.xda-developers.com/showthread.php?t=1879982
Otherwise you may boot to fastboot mode by
Power off your device
Press Volume Up key while connecting to computer via USB.
Execute
Code:
fastboot flash boot /path/to/dualboot.img
Click to expand...
Click to collapse
Booting into Recovery
TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
FAQ
I don't like the concept of dual recoveries, is there any way i can have either one?
Yes, for
CWM standalone use http://forum.xda-developers.com/showthread.php?t=2276943
TWRP : http://forum.xda-developers.com/showthread.php?t=2505502
Is this compatible with jjm34's CM10?
Yes it is, is has been specially compiled in order to be compatible with the recovery used in jjm34's CM10 recovery.
Is this compatible on Xperia E single sim?
I have not tested it out on C1504/5 since I do not own that device, however you may install this at your own risk.
Is this compatible on ICS?
Once again I have not tested it out, the kernel used is the default JB kernel.
Credits
Androxyde for his flashtool
jjm34 for his cm10 port/CWM
FXP for the initial nanhu release
Great man you are doing great.
Sent from my C1604 using Tapatalk
@hsr0 can you think to develop a better kernel with more features on our E DUAL?
now you are a real developer.... hats off...
u.lakhani10 said:
@hsr0 can you think to develop a better kernel with more features on our E DUAL?
Click to expand...
Click to collapse
Building a kernel is slightly different from what is done here, but it is quite simple to add governors and New I/O schedulers
mathewsj114 said:
now you are a real developer.... hats off...
Click to expand...
Click to collapse
Thanks, although there seems to be a hint of sarcasm in your reply
Can i use this AFTER flashing ur cm10 bro @hsr0???
---------- Post added at 06:15 PM ---------- Previous post was at 06:14 PM ----------
Can i use this AFTER flashing ur cm10 bro @hsr0???
hsr0 said:
Building a kernel is slightly different from what is done here, but it is quite simple to add governors and New I/O schedulers
Thanks, although there seems to be a hint of sarcasm in your reply
Click to expand...
Click to collapse
nope... not even a bit of sarcasm...
I mean what I said.. dude there were no good devs here for E... I really appreciate your work..
again.. not a bit of sarcasm..
gbadcool said:
Can i use this AFTER flashing ur cm10 bro @hsr0???
---------- Post added at 06:15 PM ---------- Previous post was at 06:14 PM ----------
Can i use this AFTER flashing ur cm10 bro @hsr0???
Click to expand...
Click to collapse
Sorry No, the kernel and ramdisk used in this boot.img is different from that on CM10, hence you might encounter bootloops.
mathewsj114 said:
nope... not even a bit of sarcasm...
I mean what I said.. dude there were no good devs here for E... I really appreciate your work..
again.. not a bit of sarcasm..
Click to expand...
Click to collapse
Can't install dual recovery on cm10.. Also when i connect my phone in flashmode or fastboot mode flashtool shows drivers need to be installed. However i already had installed the drivers. Also re-installed them
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Can't install dual recovery on cm10.. Also when i connect my phone in flashmode or fastboot mode flashtool shows drivers need to be installed. However i already had installed the drivers. Also re-installed them
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
This recovery is only for stock, flashing it in cm10 will result in bootloops
Can we install cwm recovery on cm10?
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Can we install cwm recovery on cm10?
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
If you install CWM recovery/this recovery, only booting into recovery will work, but the normal system startup will result in bootloops.
So i flash this only if you need to go back to your STOCK backup and don't need to run CM for the time being.
hsr0 said:
If you install CWM recovery/this recovery, only booting into recovery will work, but the normal system startup will result in bootloops.
So i flash this only if you need to go back to your STOCK backup and don't need to run CM for the time being.
Click to expand...
Click to collapse
Work great in Stock kernel, but return to CWM only after flashing the OC Kernel
(Guess OC Kernel like CM Kernel anyway)
Can't we remove twrp recovery and install cwm? Or can dual recovery be ported for cm10?
Hit thanks if i helped
adamant783 said:
Can't we remove twrp recovery and install cwm? Or can dual recovery be ported for cm10?
Hit thanks if i helped
Click to expand...
Click to collapse
I'll add the option of dual recovery in the next cm10 release.
Does the cm10 ver 1.0.1 come with dual recovery?
Sent from my Xperia E dual using xda app-developers app
adamant783 said:
Does the cm10 ver 1.0.1 come with dual recovery?
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
Not yet, i'll bring it out in the next release.
Many thank bro @hsr0. I just flash your dualboot into Stock ROM and it works perfect.
So now, dont care about network bug,( of course,we pay time but i love CM10 ROM) to wait you fix that problem. :good:
can anyone confirm this?
can C1504/C1505 users confirm this??
http://forum.xda-developers.com/showthread.php?p=48153659
loveingrup2 said:
can C1504/C1505 users confirm this??
http://forum.xda-developers.com/showthread.php?p=48153659
Click to expand...
Click to collapse
If root method, i'm use VRoot, i work well
I already test it on Xperia L, Live with Walkman, Xperia E Dual, Samsung Galaxy Note GT-N7000, and Samsung Galaxy Tab 3 7.0
But you must disable superuser ( it like SuperSU ) on Apps > All to replace SuperSU.
Remember let that superuser allow SuperSU to update binary and after that you disable superuser, not SuperSU.
After disable superuser, go to SuperSu, find install to /system, and yeah SuperSu work properly
*after allow SuperSU, install binary, dont press yes on delete other superuser cause different model cause bootloop
P/s : sorry if im out of topic, just want share this method, it easy
Good Luck! Sorry my english Bad
Hey,
This is a continuation from jjm34's version of CyanogenMod 10 with Dual SIM with a few bug fixes and changes.
Current Version : v1.1.0a 20/11/2013
Status : Alpha
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual : http://sourceforge.net/projects/nanhu-cm/files/nanhu_ds/1.1.0/
This ROM is completely based off jjm34's CM10(dual) build, hence complete credits to him for his contribution.
However a few modifications have been/are being made to kernel/ROM in order to improve user experience.
The ROM has been personally tested on my C1604 and is fit for essential use.
The is reported to be working on Xperia E single sim versions without any modifications also!
Click to expand...
Click to collapse
Features
Based on CM10 (AOSP 4.1.2)
Stable Overclock to 1.3GHz
Working Sensors(including magnetometer)
Dual SIM implementation
Works on Xperia E Single Sim Also
OTA updates supported
Non-stock CPU governors available
Installation
The ROM is currently in Alpha stage, it suggested that you charge to battery to over 50% and have a backup of your data before flashing this release
Install stock Jellybean firmware (11.3.A.2.1) since the ROM is based off that and hence requires those baseband firmwares.
Boot into recovery.
If you do not possess any recovery, check this thread http://forum.xda-developers.com/showthread.php?t=2505811
Flash the cm-nanhu_ds-ota-{version}.zip
Do a factory reset (data/cache)
(Optional) Flash Google Apps for 10.0.x from here http://goo.im/gapps
Reboot
Initial start up might take a while since the system might be caching up resources
GPL Compliance
Kernel Source : https://github.com/hsr0/android_kernel_sony_msm7x27a
Device Source Files : https://github.com/hsr0/android_device_sony_nanhu_ds
Note : The source is compiled using files from jjm34's source code modification, hence use this repo manifest https://github.com/der-koenig/repo_manifests and replace device and kernel files with the above mentioned.
Issues
Video Encoding Not Working
NOTE : Since this is a community project, it is requested that you report any issue you may find along with logcat/dmesg/last_kmsg logs
Error Reporting
Send a logcat of the phone while rebooting/while the error occurs
Enable Developer Tools -> USB Debugging
Download and extract this debugging toolkit : https://sourceforge.net/projects/nanhu-cm/files/debugging/
Run install.bat and upload the logs here.
Troubleshooting/FAQ
Video playback does not seem to work!
Upgrade to v1.0.1 or higher!
My phone seems to be overheating quite quickly!
This maybe due to the overclock feature and intensive usage, you can reduce the clock speed to improve stability!
Go to Settings -> Perfomance -> Processor -> Max CPU Frequency
Chose any of the given frequencies between 1008 MHz to 1305 MHz (1008 MHz is stock max frequency)
Change the governor to OnDemand/Powersave or Conservative
Does this work on Xperia E Single Sim?
Yes, it has been found to be stable with any major issues as of now!
How do I use the Dual Recovery!
Booting into TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
Booting into CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
How do I use SmartAssV2 Governor!
Go to Settings -> Perfomance -> Processor
Click CPU Governor
Select SMARTASSV2
Credits
jjm34 for his work on the dual sim implementation
FXP for the initial configurations
CyanogenMod Team for their ROM
CodeAurora for their dual sim implementation
Change Log
v1.0.0a 09/11/2013
Overclock to 1.3GHz
Fixed Magnetometer
v1.0.1a 15/11/2013
Fixed Video Playback issues
Added support for OTA updater
v1.1.0a 20/11/2013
First OTA update
Dual Recovery Support (see Troubleshooting/FAQ #4)
SmartAssV2 Governor added! (see Troubleshooting/FAQ #5)
NOTE: You need to be on v1.0.1 for the OTA update/incremental update patch to work!
good work buddy.. will try it ASAP
download link fixed
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Abadguy10 said:
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
yea, it's an issue carried over from the initial release
you can temporarily fix using
Settings, development tools, disable hw overlay(On)
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Hoshar said:
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Click to expand...
Click to collapse
Flash through CWM
Ever make a backup
Good job bro... :good:
Was wondering when CM10 for E dual will be continued with bugs fixed...
Btw, any screenshots please??!
Keep it up :highfive: :good:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
did you clear data and cache after flashing the ROM?
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
Flashed it through CWM and now it works, thanks man :good:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
mathewsj114 said:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Click to expand...
Click to collapse
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
mathewsj114 said:
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Click to expand...
Click to collapse
There is some issue with hardware encoding which causes both the issues, there is some issue with memory management and encoding.
I'm looking into it.
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
Click to expand...
Click to collapse
Try clearing data or uninstall and then reinstall, TB shows this error when it does not get root permission in its initial run.
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
Click to expand...
Click to collapse
It's an issue i have experienced in the stock ROM also since ICS builds, it shows a large drop during heavy usage and then rises when idle.
Might be a battery sensor module issue, not sure though, but i doubt it's a bug with the ROM, maybe an issue with the kernel.
[/QUOTE]
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..[/QUOTE]
Good to know that
---
gbadcool said:
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
Click to expand...
Click to collapse
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
---
Hoshar said:
Flashed it through CWM and now it works, thanks man :good:
Click to expand...
Click to collapse
Good to know that it works.
---
Abadguy10 said:
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
Good to know
--
Thanks for the feedback, however i have been slightly busy this week and will possibly be busy for the rest of the week, however i'll try to look into video encoding issue.
Regards
hsr
Can you port this ROM for Xperia Tipo Dual Sim??? I liked very much your r:good:elease!
What about Xperia E single?
hsr0 said:
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
Regards
hsr
Click to expand...
Click to collapse
Thanks for reply, :good:
I think i stick with this without deodex...
TheXperiaE said:
What about Xperia E single?
Click to expand...
Click to collapse
There is fxp
Sent from my Xperia E dual using Tapatalk
gbadcool said:
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
Click to expand...
Click to collapse
OP modified with instructions for GApps
INSTALL CM10 ON XPERIA E SS WITH BUGFIXES
NOTE - UNLOCKED BOOT LOADER IS NEEDED
*NOOB GUIDE*
1. DOWNLOAD @jjm34 ROM: http://sourceforge.net/projects/cmk/files/nanhu/nanhu-CM10DS-0.8.1.36-ota.zip/download
2. PUT IT ON YOUR SD CARD.
3. GO INTO RECOVERY, IF YOU DON'T HAVE RECOVERY FOLLOW GUIDE HERE: http://forum.xda-developers.com/showthread.php?t=2276943
3. DO A WIPE/FACTORY RESET
4. NOW SELECT INSTALL ZIP FROM SDCARD, DEPENDING ON WHEREVER YOU PUT THE FILE, E.G. EXTERNAL OR INTERNAL STORAGE, SELECT THE CORRESPONDING ONE AND FLASH
5. NOW POWER DOWN AND DOWNLOAD THIS KERNEL, PUT IT INTO FASTBOOT FOLDER: https://drive.google.com/file/d/0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
6. HOLD SHIFT AND RIGHT CLICK INTO THE FASBOOT FOLDER AND SELECT OPEN COMMAND WINDOW HERE
7. IN THE COMMAND WINDOW TYPE: fastboot flash boot boot.img
8. YOU SHOULD NOW HAVE A WORKING ROM WITH MOST BUGFIXES
VIDEO RECORDING IS THE ONLY THING THAT DOES NOT WORK!
THANKS TO @jjm34 FOR THE ROM AND @hsr0 FOR HIS KERNEL, ALL CREDIT GOES TO THEM!
Works Perfect ! Good Job man !
DanielFlorin said:
Works Perfect ! Good Job man !
Click to expand...
Click to collapse
Hit the Thanks Button If I Helped!
Doubt
No network bug detected with this combination?
bg.shishir said:
No network bug detected with this combination?
Click to expand...
Click to collapse
Yes no Network Bug in this Method!
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
can i onerclock it if yes please tell me how ??
harimmedayil1 said:
can i onerclock it if yes please tell me how ??
Click to expand...
Click to collapse
Yes, you can. Just go to Settings > Performance, read the message, if you're OK with it, tap OK. Open Processor, and set the Maximum CPU Frequency to whatever you want. Here's something:
600 Mhz or below: Underclock, will save battery life
1008 Mhz: Normal, like you get in stock ROM.
1036 Mhz or higher: Overclock, will increase performance.
Unfortunate surprise
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
bg.shishir said:
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
Click to expand...
Click to collapse
Confirmed by a lot of users that use this method that network bug is fixed, if you go into settings --> About Phone and Under Baseband it says unknown then flash latest stock jellybean ftf and do this process again.
Sent from my C1605 using Tapatalk
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
harimmedayil1 said:
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
Click to expand...
Click to collapse
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
NSDCars5 said:
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
Click to expand...
Click to collapse
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
harimmedayil1 said:
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
Click to expand...
Click to collapse
Ah, you have my issue. Same happens with me. Just flash this boot.img: https://drive.google.com/file/d/0B7...0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
Not working
Flashed 2 times already. Still getting the network bug after 2 days of use. This is so annoying
I flashed latest stock (11. something ) and then did exactly as you said. I have c1504.
I personally think this has something to do with Viper sound engine. Because few weeks back I had installed hsr's cm and it worked perfectly for 10-15 days. The day I installed viper, that network bug came back. This is only a guess btw. I had viper, vine and instagram installed on my phone this time.
Any suggestions?
thanks using your rom currently
this one is the most stable available rom for xperia E right?
XperiaEss said:
thanks using your rom currently
this one is the most stable available rom for xperia E right?
Click to expand...
Click to collapse
Well, other than stock, yes, it is. And NoZ and XboosT (but both of those are stock-based anyway).
yes,seen those, noz is the ultimate show off rom (I'm not into it)
xboost i wanted to try ,but the instructions were too rough and too many downloads ,if there was like ,two zips i would have tried by now
the unexpected thing i found while using this rom was that it has cwm & twrp .....not sure where i got them but i like it
i want to know how this version is different from jim34 & hsr0 cm10 rom :cyclops:
is it only me or does the magnetometer not work in cm10 rom by jim34?
No it doesn't.
Known bug
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
I think it might - I haven't tried it out, though. We need somebody to install hsr0's CM10, extract the magnetometer's updated file (which can be identified by examining the last OTA), and place it in jjm34's ROM. Note the fourth word of this post, though - might.
NSDCars5 said:
I think it might - I haven't tried it out, though. We need somebody to install hsr0's CM10, extract the magnetometer's updated file (which can be identified by examining the last OTA), and place it in jjm34's ROM. Note the fourth word of this post, though - might.
Click to expand...
Click to collapse
if you have C1504 then pls make cwn.zip
XperiaEss said:
if you have C1504 then pls make cwn.zip
Click to expand...
Click to collapse
Well, my signature does say I have a C1504, but I'm not really sure about that...
Just kidding. The weekend's coming so I might try it before I flash ICS. Stay tuned, but don't expect much - the above post by me says "might", not "will".
Hello Everyone,
First of all, I don't want to earn credits to making this guide on how to install CM 11 on Xperia E3 (d2203) I'm just translating the tutorial made by #moiremoi
Warning: This modification of your phone state will remove the warranty. Moiremoi, FXPTeam, xda developpers staff or even myself will decline any responsability on possibles issues you could get by using this ROM, flashing or any method used from this tutorial.
REVIEW:
This ROM is an unofficial CM11 ROM created from the FXP Team. It is stable and final (this mean that there would not be any update anymore)
Its is 4.4.4 based
SCREENSHOTS:
HOW TO INSTALL:
Requirements:
Sony Xperia E3 d2203 (i don't tested other versions so idk if it works or not)
Unlocked bootloader
CWM or Teamwin Recovery
Rooted android 4.4.4 firmware 18.5.C.0.19
Better do a recovery of your phone state before doing any modification
Things to download:
CM 11 ROM : http://uploaded.net/f/zx9n6h/
GAPPS : https://www.androidfilehost.com/?fid=95916177934553399 (please take these for CM11 or Android 4.4.4)
Updater-Script: http://www.mediafire.com/file/400vsdcaasc9619/updater-script (modified "Updater-script" to avoid ''Leo'' error)
How to do:
- First of all, open the CM11 archive without unzipin it and navigate to "META-INF/com/google/android" and replace the existing "updater-script" file to the one required (link to download required file just over there)
- Copy and paste the CM11 + gapps zip to your SD card (just place it to sd, do not make it in any folder to retrieve it faster)
- Turn you phone on (or reboot it) and press many times the Vol + and Vol - at the booting sony screen to go on recovery mode
- Navigate into the menu and choose Wipe cache/data (if you forget to do a wipe, you just can forget to install the ROM)
- Then;
install zip from sdcard >> choose zip from sdcard >> (select ROM .zip) >> Yes
install zip from sdcard >> choose zip from sdcard >> (select GAPPS .zip ) >> Yes
Now, you just have to wait untill finish and choose reboot now
BUGLIST:
No NFC
Not really listed as bug but I find the audio power a bit lowered compared to Stock
Time of the phone battery charge (from 0 to 100%) a bit longer (it can depend on which usb you use too, maybe not a bug)
Camera, audio and every other sony related things are 100% WORKING
I will not help you if you occurs any type of errors, I installed this ROM and its working, If you don't know how to... just go ahead
Thanks and credits to:
FXP team for the ROM
Moiremoi for the modified updater script which is making the rom working and tutorial (on another website)
Myself for testing, editing and for screenshots.
(If I forgot someone please tell it to me through MP)
Have fun and enjoy your new CM11 ROM !
Regards,
Exerath
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Vynikal said:
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Click to expand...
Click to collapse
Can i do this process for d2212 xperia e3 model
jayesp0411 said:
Can i do this process for d2212 xperia e3 model
Click to expand...
Click to collapse
porting in progress.
no network.
D2212
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
Vynikal said:
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Click to expand...
Click to collapse
i downloaded cm11 from fxp and flashed it without editing updater-script it failed than i wipe data and cache then flashed it worked.
i was using my own latest cwm with fixed resolution.
(i have tested it with ported kernel)
device is leo bug was because old cwm was made for leo new fixed resolution is for flamingo.
so no bug,s
vinay said:
porting in progress.
no network.
D2212
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
i downloaded cm11 from fxp and flashed it without editing updater-script it failed than i wipe data and cache then flashed it worked.
i was using my own latest cwm with fixed resolution.
(i have tested it with ported kernel)
device is leo bug was because old cwm was made for leo new fixed resolution is for flamingo.
so no bug,s
Click to expand...
Click to collapse
I seen that you did a lot of great work for the E3, now I am just curious to know if you (or someone else reading this) can make the volume of CM11 a bit louder (aka stronger)
I reflashed stock 4.4.2 with Viper4Android on my E3 and the sound is drastically higher as with CM11+Viper4Android (On 4.4.4 xLoud is missing too, idk why, I tought it were a stock official firmware ??)
I checked every setting about sound but I don't see any error, could it be the sony XLoud thing (absent on CM11) which could make this issue with lower powered sound?
Searching on Google to ''install or flash xLoud" but no hope atm, I found nothing working (a lot of error flashing .zip but none working) :/
This is known on almost all devices. The volume is always lower on AOSP ROMs than on stock. Xloud isn't easy to add, only very good themers are able to include it. You have to understand Xloud is proprietary and not open-sourced.
Trust me, it was truly a shock, when I heard silent speakers of my old LWW with CM just installed
Vynikal said:
This is known on almost all devices. The volume is always lower on AOSP ROMs than on stock. Xloud isn't easy to add, only very good themers are able to include it. You have to understand Xloud is proprietary and not open-sourced.
Trust me, it was truly a shock, when I heard silent speakers of my old LWW with CM just installed
Click to expand...
Click to collapse
Volume was higher with cm 10 on my xperia J as on Stock, on AOSP we have the possibility to disable audio security imposed from governments, on stock not, that's why I asked
Thanks Exerath for thé translation !
you guy,s are lucky.
i am thinking why did i bought this dual variiant even if rom get ported to non lte dual sim still gona need porting for second sim support.
never gonna buy non lte or dual sim again.
even tho there is no lte in my area.
all i get is no baseband.
vinay said:
you guy,s are lucky.
i am thinking why did i bought this dual variiant even if rom get ported to non lte dual sim still gona need porting for second sim support.
never gonna buy non lte or dual sim again.
even tho there is no lte in my area.
all i get is no baseband.
Click to expand...
Click to collapse
Why not release it for d2202? Network might work for us
Finally updated to 4.4.4 xD
hell_lock said:
Why not release it for d2202? Network might work for us
Finally updated to 4.4.4 xD
Click to expand...
Click to collapse
Well uday tested it.
No network on d2202 even. I will upload it in free time.
problem is with ril.
(and before flashing cm11 if your wifi is off then it won't turn on. That's what i found. And i gave up. i can't fix ril tried replacing libril.so, refrences_ril.so and one more lib i forgot name. And tried thousands of combination of stock and cm11)
(i am not experienced in porting uploading kernel soon on this thread.)
Sent from my D2212 using XDA Free mobile app
D2202,d2212 support.
Port moved here => http://forum.xda-developers.com/xperia-e3/general/d2203-testers-cm11-t3179189
vinay said:
@Exerath can you give a link to this post on OP so other,s can find it easily.
STEPS
* DOWNLOAD boot.zip attached below.
* flash cm11 then flash this boot.img inside boot.zip.
it will work on d2202 and d2212
BUG,s
NO RIL NO BASRBAND (mean no network)
who is gonna fix bug,s => probably not me.
warning make sure your wifi is on before flashing cm11 or you can,t turn on after flashing cm11.
Click to expand...
Click to collapse
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Exerath said:
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Click to expand...
Click to collapse
Nope this is a just port kernel for d2202 and d2212.
Sent from my D2212 using XDA Free mobile app
Can i flash this on d2212 if yes what are the bugs????
Plz provide direct download link
Sent from my Moto G 2014 using XDA Premium 4 mobile app
amritmalviya said:
Can i flash this on d2212 if yes what are the bugs????
Plz provide direct download link
Sent from my Moto G 2014 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just see two posts up thare is written everything.
Exerath said:
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Click to expand...
Click to collapse
no ril working then what is use of flashing cm11
Sent from my Moto G 2014 using XDA Premium 4 mobile app
amritmalviya said:
no ril working then what is use of flashing cm11
Sent from my Moto G 2014 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ril problem is just in d2212 and d2202 so other,s are enjoying it with ril.
back button and menu not work, how to solve?
entony80 said:
back button and menu not work, how to solve?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------
easy solution.
use a hammer to press back button with full force.
-------------------------------------------------------------------------------------------
hard solution
try re flashing whole rom and wipe data/cache
--------------------------------------------------------------------------------------------