Hey,
This is a continuation from jjm34's version of CyanogenMod 10 with Dual SIM with a few bug fixes and changes.
Current Version : v1.1.0a 20/11/2013
Status : Alpha
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* You may have voided your device's warranty.
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. [B]YOU[/B] are choosing to make these modifications on your device
* I absolutely disclaim any responsibility.
*/
Download Links
Xperia E Dual : http://sourceforge.net/projects/nanhu-cm/files/nanhu_ds/1.1.0/
This ROM is completely based off jjm34's CM10(dual) build, hence complete credits to him for his contribution.
However a few modifications have been/are being made to kernel/ROM in order to improve user experience.
The ROM has been personally tested on my C1604 and is fit for essential use.
The is reported to be working on Xperia E single sim versions without any modifications also!
Click to expand...
Click to collapse
Features
Based on CM10 (AOSP 4.1.2)
Stable Overclock to 1.3GHz
Working Sensors(including magnetometer)
Dual SIM implementation
Works on Xperia E Single Sim Also
OTA updates supported
Non-stock CPU governors available
Installation
The ROM is currently in Alpha stage, it suggested that you charge to battery to over 50% and have a backup of your data before flashing this release
Install stock Jellybean firmware (11.3.A.2.1) since the ROM is based off that and hence requires those baseband firmwares.
Boot into recovery.
If you do not possess any recovery, check this thread http://forum.xda-developers.com/showthread.php?t=2505811
Flash the cm-nanhu_ds-ota-{version}.zip
Do a factory reset (data/cache)
(Optional) Flash Google Apps for 10.0.x from here http://goo.im/gapps
Reboot
Initial start up might take a while since the system might be caching up resources
GPL Compliance
Kernel Source : https://github.com/hsr0/android_kernel_sony_msm7x27a
Device Source Files : https://github.com/hsr0/android_device_sony_nanhu_ds
Note : The source is compiled using files from jjm34's source code modification, hence use this repo manifest https://github.com/der-koenig/repo_manifests and replace device and kernel files with the above mentioned.
Issues
Video Encoding Not Working
NOTE : Since this is a community project, it is requested that you report any issue you may find along with logcat/dmesg/last_kmsg logs
Error Reporting
Send a logcat of the phone while rebooting/while the error occurs
Enable Developer Tools -> USB Debugging
Download and extract this debugging toolkit : https://sourceforge.net/projects/nanhu-cm/files/debugging/
Run install.bat and upload the logs here.
Troubleshooting/FAQ
Video playback does not seem to work!
Upgrade to v1.0.1 or higher!
My phone seems to be overheating quite quickly!
This maybe due to the overclock feature and intensive usage, you can reduce the clock speed to improve stability!
Go to Settings -> Perfomance -> Processor -> Max CPU Frequency
Chose any of the given frequencies between 1008 MHz to 1305 MHz (1008 MHz is stock max frequency)
Change the governor to OnDemand/Powersave or Conservative
Does this work on Xperia E Single Sim?
Yes, it has been found to be stable with any major issues as of now!
How do I use the Dual Recovery!
Booting into TWRP
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, press the volume down key a couple of times
You should be in recovery mode with orange notification bar
Booting into CWM
Power Off The Device
Power on the device
When the lower notification bar lights up to blue, wait till it lights off
When notification bars lights up to green, press the volume down key
You should be in recovery mode with orange notification bar
How do I use SmartAssV2 Governor!
Go to Settings -> Perfomance -> Processor
Click CPU Governor
Select SMARTASSV2
Credits
jjm34 for his work on the dual sim implementation
FXP for the initial configurations
CyanogenMod Team for their ROM
CodeAurora for their dual sim implementation
Change Log
v1.0.0a 09/11/2013
Overclock to 1.3GHz
Fixed Magnetometer
v1.0.1a 15/11/2013
Fixed Video Playback issues
Added support for OTA updater
v1.1.0a 20/11/2013
First OTA update
Dual Recovery Support (see Troubleshooting/FAQ #4)
SmartAssV2 Governor added! (see Troubleshooting/FAQ #5)
NOTE: You need to be on v1.0.1 for the OTA update/incremental update patch to work!
good work buddy.. will try it ASAP
download link fixed
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Abadguy10 said:
Works great on my E dual.
Sent from my Xperia E dual using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 05:16 PM ----------
Video player does not work.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
yea, it's an issue carried over from the initial release
you can temporarily fix using
Settings, development tools, disable hw overlay(On)
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Hoshar said:
Hello !
My phone is not charging after flashing this ROM. I have a C1605.
Is there a solution for that ?
Click to expand...
Click to collapse
Flash through CWM
Ever make a backup
Good job bro... :good:
Was wondering when CM10 for E dual will be continued with bugs fixed...
Btw, any screenshots please??!
Keep it up :highfive: :good:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
did you clear data and cache after flashing the ROM?
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
realthrash said:
Flash through CWM
Ever make a backup
Click to expand...
Click to collapse
Flashed it through CWM and now it works, thanks man :good:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
mathewsj114 said:
Flashed it..
The over clock is cool
No network and charging bug till now
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..
Click to expand...
Click to collapse
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
mathewsj114 said:
The camera Fc when recording video.
The video playback wasn't working but the disable hw option helped..
Click to expand...
Click to collapse
There is some issue with hardware encoding which causes both the issues, there is some issue with memory management and encoding.
I'm looking into it.
Titanium backup shows error with root.
Viper audio engine asks to install drivers every time I open it(might be a conflict with DSP).
Click to expand...
Click to collapse
Try clearing data or uninstall and then reinstall, TB shows this error when it does not get root permission in its initial run.
And the battery percentage is very weird.. it shows a large drop in a few minutes and then the level goes higher again ( would try a recaliberation tomorrow)
Click to expand...
Click to collapse
It's an issue i have experienced in the stock ROM also since ICS builds, it shows a large drop during heavy usage and then rises when idle.
Might be a battery sensor module issue, not sure though, but i doubt it's a bug with the ROM, maybe an issue with the kernel.
[/QUOTE]
The ROM is fluid smooth. and the overclocking is stable..
Will tell you more soon..
Anyway the kernel is good..[/QUOTE]
Good to know that
---
gbadcool said:
Can i use this deodex zip files from here http://forum.xda-developers.com/showthread.php?t=2444015 to this rom or u do have the deodex version???
Click to expand...
Click to collapse
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
---
Hoshar said:
Flashed it through CWM and now it works, thanks man :good:
Click to expand...
Click to collapse
Good to know that it works.
---
Abadguy10 said:
Well viper audio works fine for me.
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
Good to know
--
Thanks for the feedback, however i have been slightly busy this week and will possibly be busy for the rest of the week, however i'll try to look into video encoding issue.
Regards
hsr
Can you port this ROM for Xperia Tipo Dual Sim??? I liked very much your r:good:elease!
What about Xperia E single?
hsr0 said:
This ROM is different from the version that is deodexed, you have to manually deodex this ROM.
Deodexing is recommended if you wish to modify the ROM, otherwise odexed ROMs have better performance in general
This might help : http://forum.xda-developers.com/showthread.php?t=2374008
Regards
hsr
Click to expand...
Click to collapse
Thanks for reply, :good:
I think i stick with this without deodex...
TheXperiaE said:
What about Xperia E single?
Click to expand...
Click to collapse
There is fxp
Sent from my Xperia E dual using Tapatalk
gbadcool said:
Done flashing, looking good for now, need to sync my google account, searching for latest gapps...
Any ideas?
Never mind...
Everything work great even BBM n hangout2 work well...
Thanks so much bro... :thumbup:
Keep up the good works :thumbup:
Click to expand...
Click to collapse
OP modified with instructions for GApps
Related
INSTALL CM10 ON XPERIA E SS WITH BUGFIXES
NOTE - UNLOCKED BOOT LOADER IS NEEDED
*NOOB GUIDE*
1. DOWNLOAD @jjm34 ROM: http://sourceforge.net/projects/cmk/files/nanhu/nanhu-CM10DS-0.8.1.36-ota.zip/download
2. PUT IT ON YOUR SD CARD.
3. GO INTO RECOVERY, IF YOU DON'T HAVE RECOVERY FOLLOW GUIDE HERE: http://forum.xda-developers.com/showthread.php?t=2276943
3. DO A WIPE/FACTORY RESET
4. NOW SELECT INSTALL ZIP FROM SDCARD, DEPENDING ON WHEREVER YOU PUT THE FILE, E.G. EXTERNAL OR INTERNAL STORAGE, SELECT THE CORRESPONDING ONE AND FLASH
5. NOW POWER DOWN AND DOWNLOAD THIS KERNEL, PUT IT INTO FASTBOOT FOLDER: https://drive.google.com/file/d/0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
6. HOLD SHIFT AND RIGHT CLICK INTO THE FASBOOT FOLDER AND SELECT OPEN COMMAND WINDOW HERE
7. IN THE COMMAND WINDOW TYPE: fastboot flash boot boot.img
8. YOU SHOULD NOW HAVE A WORKING ROM WITH MOST BUGFIXES
VIDEO RECORDING IS THE ONLY THING THAT DOES NOT WORK!
THANKS TO @jjm34 FOR THE ROM AND @hsr0 FOR HIS KERNEL, ALL CREDIT GOES TO THEM!
Works Perfect ! Good Job man !
DanielFlorin said:
Works Perfect ! Good Job man !
Click to expand...
Click to collapse
Hit the Thanks Button If I Helped!
Doubt
No network bug detected with this combination?
bg.shishir said:
No network bug detected with this combination?
Click to expand...
Click to collapse
Yes no Network Bug in this Method!
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
smz2014 said:
dude video recording with some other video recorder also doesn't work ?
@UltraGamerHD
Click to expand...
Click to collapse
Yes Video Recording (Need Fixing) is not going to work, the title clearly says Almost All Bug Fix.
Too busy working on CM11.
can i onerclock it if yes please tell me how ??
harimmedayil1 said:
can i onerclock it if yes please tell me how ??
Click to expand...
Click to collapse
Yes, you can. Just go to Settings > Performance, read the message, if you're OK with it, tap OK. Open Processor, and set the Maximum CPU Frequency to whatever you want. Here's something:
600 Mhz or below: Underclock, will save battery life
1008 Mhz: Normal, like you get in stock ROM.
1036 Mhz or higher: Overclock, will increase performance.
Unfortunate surprise
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
bg.shishir said:
Dude.. just got the network bug.
Any advice? I really love cyanogen.
Also how is cm11 bugfixing coming along?
Click to expand...
Click to collapse
Confirmed by a lot of users that use this method that network bug is fixed, if you go into settings --> About Phone and Under Baseband it says unknown then flash latest stock jellybean ftf and do this process again.
Sent from my C1605 using Tapatalk
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
harimmedayil1 said:
earlier there wasa thread to overclock upto 1.36 ghz for the xperia E nanhu SS i coudnt find the kernel for that.then i flashed riches kernel my phone didnt even turn on
MY device SONY xperia E
running on xbooost rom
Click to expand...
Click to collapse
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
NSDCars5 said:
If you're using XboosT, Riches will not work. Riches is only for CM. If you want overclock, install CM10. If you want ICS, flash the XboosT kernel again. I don't think you can have both.
Click to expand...
Click to collapse
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
harimmedayil1 said:
nop i flashe riches when i had cm 10 but after flashing riches ma phone didnt turn on it just vibrates on pushing power button and stays dead
Click to expand...
Click to collapse
Ah, you have my issue. Same happens with me. Just flash this boot.img: https://drive.google.com/file/d/0B7...0B73-53ZX-WVRSGxDZFBjNURBdm8/edit?usp=sharing
Not working
Flashed 2 times already. Still getting the network bug after 2 days of use. This is so annoying
I flashed latest stock (11. something ) and then did exactly as you said. I have c1504.
I personally think this has something to do with Viper sound engine. Because few weeks back I had installed hsr's cm and it worked perfectly for 10-15 days. The day I installed viper, that network bug came back. This is only a guess btw. I had viper, vine and instagram installed on my phone this time.
Any suggestions?
thanks using your rom currently
this one is the most stable available rom for xperia E right?
XperiaEss said:
thanks using your rom currently
this one is the most stable available rom for xperia E right?
Click to expand...
Click to collapse
Well, other than stock, yes, it is. And NoZ and XboosT (but both of those are stock-based anyway).
yes,seen those, noz is the ultimate show off rom (I'm not into it)
xboost i wanted to try ,but the instructions were too rough and too many downloads ,if there was like ,two zips i would have tried by now
the unexpected thing i found while using this rom was that it has cwm & twrp .....not sure where i got them but i like it
i want to know how this version is different from jim34 & hsr0 cm10 rom :cyclops:
Hi,
I decided to update this thread with separate E/E dual links, plus some extra instructions
You'll need an unlocked bootloader for this action. Unlocking the bootloader will result in warranty loss. I will not be held responsible for anything that may or may not happen to your device.
What is the point of this thread? Well, this thread offers you a CM10 for our E with the baseband uknown(SIM not recognized issue) that randomly occurs after a couple reboots(some people like me get it in 3 days, others have never got it).
This CM10 was an update by @jjm34 (OTA 1.1.0). Member @Johnt880 discovered that this update brings a stable baseband. All credits go to him! I merely created E single and E dual versions and Deodexed them! I also replaced the boot.img with @UltraGamerHD his Hades kernel, so you'll get 1,5 gHz OC and some other stuff.
The bugs of this CM10 are:
-Magnetomet not working(no automatic landscape/portrait)
-Video recording doesn't work.
-Video playback doesn't work(no YouTube)
-Bluetooth acts strange(it connects, but refuses to exchange any kind of media)
As you can see that's pretty bearable.
Installation instructions:
1. Download the appropiate ROM for your device. Choose the Odexed or the Deodexed version(easier modding).
2. Download the Gapps(contains Play Store, so pretty important)
3. Place the 2 .zips on your SD card(internal or external, doesn't matter)
4. Flash the boot.img inside the ROM.zip. You can use Flashtool or the Android SDK.
5. Boot into your preferred recovery(TWRP is the most convenient). Blue LED=TWRP. Green LED=CWM.
7. When using TWRP: Wipe cache, dalvik-cache, data and system under ''Wipe'', ''Advanced wipe''
When using CWM: Wipe data(hard reset), wipe dalvik-cache(under ''advanced'') and format system
8. Install zip from SD card>CM10ROM.zip
9. When it's done, install zip from SD card>gapps.zip
10. Reboot system, insert PIN and enjoy your SIM recognized CM10
Little advice: CM10 doesn't give you the option to switch between Wi-Fi and 3G like stock does. So when you insert your G-mail and password, it will use precious data to establish a connection. If this is something you don't want to, just skip the G-mail, skip the creation of a G-mail, and go to ''Settings''>''More''>''Mobile Networks'' and uncheck the data. Now you can enable Wi-Fi and open the Play Store. You will have to insert a G-mail and now you can since you have a wi-fi connection
Downloads:
E single:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhteURaWS1OcDBhWE0/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtZVFmaUtQVmZ3ZFE/edit?usp=sharing
E dual:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhtdy1QS2puMEFadlk/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtOUJBSjVLXzl5Ym8/edit?usp=sharing
Gapps: https://drive.google.com/file/d/0B6-n6J0wUrhtc0VZVE1ySHBkb0k/edit?usp=sharing
Credits:
@Johnt880 for the discovery of the update.
@UltraGamerHD for his Hades kernel.
@jjm34 for the actual ROM
Thanks for this dude!
TheRealSS said:
Thanks for this dude!
Click to expand...
Click to collapse
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Video recording not working ...
MatsPunt said:
O ****. I forgot to include hsr0'skernel in the zips!
Will reupload!
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wait, so isn't this just jjm34's rom with hsr0's kernel?
TheRealSS said:
Wait, so isn't this just jjm34's rom with hsr0's kernel?
Click to expand...
Click to collapse
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
MatsPunt said:
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.
You can flash this when the SIM bug occurs!
What I meant is that I forgot to add hsr0's kernel in the zip!
Hope that's clear.
Mats
Sent from my Xperia E using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, okay, I get it.
Links are Down @MatsPunt!
TheRealSS said:
Oh, okay, I get it.
Click to expand...
Click to collapse
To be absolutely sure(sorry..)
jjm34 and hsr0 both built a CM10 ROM.
We discovered that jjm34's ROM+hsr0's kernel s the most stable for the E single.
BUT on jjm34 his sourceforge page for the E single is an update of 150 mb.
Now, when you are on jjm34 his ROM and hsr0 his kernel, you may experience the SIM bug.
Flashing the update will solve this. When it happens again, just flash the update.
Note: remove the apks in the update that you deleted in the base ROM. Otherwise you will get those apps again. Also, when you modify anything you have to add the files to the update too! Otherwise the system wll be overwritten with stock CM10 and your mods will disappear.
Hope that it's now completely clear! Correct download links will be up in 10 minutes.
Mats
UltraGamerHD said:
Links are Down @MatsPunt!
Click to expand...
Click to collapse
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
MatsPunt said:
I know! Wrong zips. New ones will be up in 10/15 minutess. Sorry for the inconvenience.
Mats
Click to expand...
Click to collapse
No probs, What are the .zip files anyway are they @jjm34 revised 0.8.1.36 versions of cm10 or what?...... explain?
Allright, links are up. Have fun playing with CM10
Mats
I am sorry for misleading anyone , I just never thought of testing the video,I tested camera and panoramic as they worked. I assumed the video would too
Anyway keep up the good work Many thanks
Wait.. camera and panaroma? Those work, it's only video recording.
@Johnt880 No problems, you are now in my list of people whom I like a lot! By a lot, I mean I'd be star-struck if I met you.
Thank you very much
Is this the full rom?? 155mb? thats a big size for a baseband fix....if its a full rom...this should be advertised as the new cm10 rom for E
---------- Post added at 08:09 AM ---------- Previous post was at 08:07 AM ----------
DanielFlorin said:
Video recording not working ...
Click to expand...
Click to collapse
just a gsm fix dude.....
before, if you get this bug you had to flash stock ftf again & then cm10 @MatsPunt someone said flashing xboost (rom only) also fixes the problem..
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
DanielFlorin said:
I had no problems with GSM on CM10 !
1 . Flash Jjm32 Kernel
2 . Go to Recorvery and Wipe data / factory reset
3 . Flash Jjm34 Rom + Gapps
4 . Power Off device
5 . Flash Kernel Hsr0
GSM and battery percentage works perfectly on my Xperia E C1505
Click to expand...
Click to collapse
The problems won't come at once; after some time, you'll get it.
For three weeks I had the problem with GSM
DanielFlorin said:
For three weeks I had the problem with GSM
Click to expand...
Click to collapse
I get it roughly once a month; that's once every four-five weeks.
MIUI for Micromax A110
Features
* Ported ZTE V970
* 200+ free space on rom most of the times. I even got 263 mb free ram after days of usage
*IEverything is working right out of the box.But some scripts are not supported and are anyway resulting in lag.So I am not responsible for any such
* Pure Audio built in
* Tweaks added for Smoothness
* Battery tweaks added
* 3G toggle Added
* I suggest not to add additional tweaks other than mentioned as it will create conflicts with scrips already included and other problems will appear.
Flash Instructions
Factory Reset
Install Rom
Reboot
Additional Tweaks
- For Boosting up the Audio,Use Engineering mode from Stock Settings and go over to audio tab increase the normal and loudspeakers setting to 150
- Use pimp my rom to get the maximum entropy to get smooth UI.Use Pimp my rom only to increase entropy.
- Use Swap patch for more free ram
-Rom is already tweaked to the max.At times I even got 268mb free ram :good:
BUGS
Cam Closes In Video Mode if advanced settings is selected JB Out of The Box Devices
Torch from home is not working.[USE Mi Tool and set Long press Menu for Torch ]
If any toggles are not working,then the init.d scripts are causing the problem.Remove all init.d scripts and use swap scripts only.that should solve the problem.
Downloads
GOOGLE DRIVE LINK
OTA UPDATES
Update Instructions
Every Week After ZTE is updated.Updater App will ask to download OTA Update
Download the Update and Open the Updater Script
find line assert(apply_patch_check("/system/build.prop and Comment it out
Save the modified Updater Script and Flash it through Recovery
Wipe Dalvik Cache and Fix Permissions
Reboot.
ScreenShots
Screenshots please
Screenshots
screenshots :
Regarding showing ZTE v970 in about phone,I forgot to change the name in build.prop that is all.
ScreenShots link
Screenshot shows 1GB RAM how come???
Nice ...good work..
And after long usage (about a week) miui will become so laggy .....what scripts have you included in ROM and
waiting for future builds ,stable and continuous OTA support
Sent from my NeXus using XDA Premium 4 mobile app
5ud0 said:
screenshots :
Regarding showing ZTE v970 in about phone,I forgot to change the name in build.prop that is all.
ScreenShots link
Click to expand...
Click to collapse
Yeah...I ported the rom from ZTE v970 which has 1Gb rom..it is just in that.actually it has 512 itself.
srinath2912 said:
Nice ...good work..
And after long usage (about a week) miui will become so laggy .....what scripts have you included in ROM and
waiting for future builds ,stable and continuous OTA support
Sent from my NeXus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah...I have been using the rom from about a week and installed many apps but still it has 200+ free memory.You can also use zepplin Supercharger on it for some performance and seeder or pimp my rom for increasing the entropy.
Regarding OTA updates, I still have to look in to that and I'll see what I can do with this weeks update.
Glad you like it.thank you
Nice work buddy keep it up guys who all have installed the rom pls give a full thorough feedback regarding performance & bugs n ya gamin too pls?
Does Application move to SD card works on it?
Regards,
5ud0 said:
Yeah...I have been using the rom from about a week and installed many apps but still it has 200+ free memory.You can also use zepplin Supercharger on it for some performance and seeder or pimp my rom for increasing the entropy.
Regarding OTA updates, I still have to look in to that and I'll see what I can do with this weeks update.
Glad you like it.thank you
Click to expand...
Click to collapse
Bro is there option to set first sim or both sim to gsm & wcdma? As it was not there in previous miui roms? & till when will u fix wifi prob?
Ps. If u dont mind take the help of any senior developer and make it bugless rom pls?
rohit83 said:
Bro is there option to set first sim or both sim to gsm & wcdma? As it was not there in previous miui roms? & till when will u fix wifi prob?
Ps. If u dont mind take the help of any senior developer and make it bugless rom pls?
Click to expand...
Click to collapse
Hey Bro,
I suppose there is an option for choosing the first sim as gms & wcdma in engineering mode.regarding wifi,I am having that problem with the bugless rom by other developers also..So,I am thinking may be any body could test it for me
Nice work buddy. Keep it up.
Akhilendra Gadde said:
Nice work buddy. Keep it up.
Click to expand...
Click to collapse
nice try by 5UD0 but has some issues like
1.sd card mount problems after usb mount
2.wifi and BT and GPS toggles not working sometimes had to reboot ..
3.cam professional mode FC
4.opening facebook app hangs phone
5. 3G option missing but works in Engg mode
Tried project mod boost works well with MIUI but same problems as above
other than nice rom but we miss MIUI updates from @Akhilendra Gadde (you)
and 4.4.4 update is not released till now...and waiting for non-stop MIUI updates from both of You...
srinath2912 said:
nice try by 5UD0 but has some issues like
1.sd card mount problems after usb mount
2.wifi and BT and GPS toggles not working sometimes had to reboot ..
3.cam professional mode FC
4.opening facebook app hangs phone
5. 3G option missing but works in Engg mode
Tried project mod boost works well with MIUI but same problems as above
other than nice rom but we miss MIUI updates from @Akhilendra Gadde (you)
and 4.4.4 update is not released till now...and waiting for non-stop MIUI updates from both of You...
Click to expand...
Click to collapse
Dont worry about updates from my side. I will release it when it out
srinath2912 said:
nice try by 5UD0 but has some issues like
1.sd card mount problems after usb mount
2.wifi and BT and GPS toggles not working sometimes had to reboot ..
3.cam professional mode FC
4.opening facebook app hangs phone
5. 3G option missing but works in Engg mode
Tried project mod boost works well with MIUI but same problems as above
other than nice rom but we miss MIUI updates from @Akhilendra Gadde (you)
and 4.4.4 update is not released till now...and waiting for non-stop MIUI updates from both of You...
Click to expand...
Click to collapse
Hi Srinath,
1 I have changed some files in the new port and hopefully the sdcard one would be fixed I suppose.
2 I have no knowledge of how to fix the toggle issue.They worked fine in the starting some boots and stopped working after wipe cache or fixing permissions after some boots.
3 Cam is working for me in professional mode too.but video is FC.I have jb out of the box.video is not working for me with any rom.So I thought that is a kernel problem
4 I have added tweaks,now their should be some significant improvement in performance.
Anyone test the rom and tell is it working?
is there any update releasing because OTA update link is not working so still i'll get updates on mobile?
and WIFI, Bluetooth and GPS toggle issue is there or not, please confirm.
shaikh956 said:
is there any update releasing because OTA update link is not working so still i'll get updates on mobile?
and WIFI, Bluetooth and GPS toggle issue is there or not, please confirm.
Click to expand...
Click to collapse
Hi,
You will get updates on the mobile and the zip downloaded has to be tweaked as stated in post #1 to make it flash.
Regarding the toggles,Every toggle is working flawlessly.
In the initial setup for Wifi, one has to install V6 SuperCharger and do Super Clean from the options in script to make it work.
5ud0 said:
Hi,
You will get updates on the mobile and the zip downloaded has to be tweaked as stated in post #1 to make it flash.
Regarding the toggles,Every toggle is working flawlessly.
In the initial setup for Wifi, one has to install V6 SuperCharger and do Super Clean from the options in script to make it work.
Click to expand...
Click to collapse
can you please share steps how to install V6 SuperCharger and do Super Clean bcoz i m new user.
shaikh956 said:
can you please share steps how to install V6 SuperCharger and do Super Clean bcoz i m new user.
Click to expand...
Click to collapse
Here,
Read through the thread.
http://forum.xda-developers.com/showthread.php?t=991276
and install V6 supercharger.
It is just running the script from Scrip Manager Application[Download from Google Play]
Development thread for d2202/12 devices. LTE variant users do not install.
Update #2(latest): http://forum.xda-developers.com/showpost.php?p=65322607&postcount=166
Old package: http://forum.xda-developers.com/showpost.php?p=64800292&postcount=52
Instructions:
Wipe data
Flash rom
Reboot
Flash gapps(optional)
Bugs:
-nfc
hell_lock said:
Hey guys! I have compiled cm11 from sources for d2203 users only. Its my first build and since I don't own a d2203 so I have to depend upon you guys for testing it.
I have made no changes in the source code. This is a clean build.
Once this works out, I'll port the device trees for d2202/12 users and support all the variants afterwards..
Here's the link: https://www.androidfilehost.com/?fid=24052804347794256
Keep a backup before flashing it.
Report me what works/doesnt work.
Click to expand...
Click to collapse
I'm testing on D2203
According to my testers.. The rom is stable on d2203. Next build will be only for d2202 users.
hell_lock said:
According to my testers.. The rom is stable on d2203. Next build will be only for d2202 users.
Click to expand...
Click to collapse
Rom quite stable with battery consumption well above the UI of Sony with stamina mode. The speakerphone during a call does not work and in some moments it can happen after you apply a theme restart suddenly
D2202 users should try flashing the rom with this kernel: https://www.androidfilehost.com/?fid=24052804347794840
entony80 said:
Rom quite stable with battery consumption well above the UI of Sony with stamina mode. The speakerphone during a call does not work and in some moments it can happen after you apply a theme restart suddenly
Click to expand...
Click to collapse
really? how is the standby battery drain in yours? my phone's battery is being drained with an average rate of 2% per hour. compared to stock which is 0.3% per hour which is significantly lower than using CM11.
noobAKO said:
really? how is the standby battery drain in yours? my phone's battery is being drained with an average rate of 2% per hour. compared to stock which is 0.3% per hour which is significantly lower than using CM11.
Click to expand...
Click to collapse
The exhaust of Cm11 is higher for me, I prefer the stock rom with the kernel Vinary and mode stamina active is really great for me
entony80 said:
The exhaust of Cm11 is higher for me, I prefer the stock rom with the kernel Vinary and mode stamina active is really great for me
Click to expand...
Click to collapse
both AOSP and CM roms for d2203 have insane idle battery drain. I thought I am the only one experiencing it. gonna use this rom until I find the culprit.
D2212 and D2202 test Cynogenmod.
this is third build of our cyngenmod 11 non LTE
RIL should be working.
report bug,s
--deleted--http://www.mediafire.com/download/l451pg8412l9c5a/cm-11-20150912-UNOFFICIAL-flamingo.zip
use it at your own risk i would,t be responsible for bricked devices.
------------------EDIT--------------
the Hybrid that was made for this rom
https://forum.xda-developers.com/showpost.php?p=64830587&postcount=78
cm11 update
D2212/D2202
----deleted---http://www.mediafire.com/download/9aa2p3879eammas/cm-11-20150919-UNOFFICIAL-flamingo.zip
updated propensity files and added missing lib,s.
and updated wifi drivers
for flashing
wipe data and cache
flash zip
reboot system
vinay said:
cm11 update
D2212/D2202
http://www.mediafire.com/…/cm-11-20150919-UNOFFICIAL-flamin…
updated propensity files and added missing lib,s.
and updated wifi drivers
for flashing
wipe data and cache
flash zip
reboot system
Click to expand...
Click to collapse
vinay link is not working,
and is camera working in this new update?
himfa71 said:
vinay link is not working,
and is camera working in this new update?
Click to expand...
Click to collapse
fixed link.
camera is not working.
vinay said:
fixed link.
camera is not working.
Click to expand...
Click to collapse
Why camera not working ?? There is one cm11 for e3 and there camera works ?
#Vangreen said:
Why camera not working ?? There is one cm11 for e3 and there camera works ?
Click to expand...
Click to collapse
this is for D2212/D2202 not supported by FXP..
Any chance to fix camera ?
vinay said:
this is third build of our cyngenmod 11 non LTE
RIL should be working.
report bug,s
http://www.mediafire.com/download/l451pg8412l9c5a/cm-11-20150912-UNOFFICIAL-flamingo.zip
use it at your own risk i would,t be responsible for bricked devices.
Click to expand...
Click to collapse
zip package is corrupted
rahulkapadiya1 said:
zip package is corrupted
Click to expand...
Click to collapse
No it is not.
Just found this thread a couple of days ago, I've been testing the ROM ever since on my D2212. Here's my thoughts:
-light, fast ROM
-Unfortunately no APP to SD card functional.
-No problems with battery
-Camera not working
-Networking and WiFi work fine.
I liked this ROM quite a bit, a lot of potential here, hope development for it continues.
vinay said:
No it is not.
Click to expand...
Click to collapse
When I flash using twrp it says zip package is corrupted on d2212 e3 dual . I also tried second update by you named cm-11-20150919-UNOFFICIAL-flamingo . It also shows error executing updater binary in zip
rahulkapadiya1 said:
When I flash using twrp it says zip package is corrupted on d2212 e3 dual . I also tried second update by you named cm-11-20150919-UNOFFICIAL-flamingo . It also shows error executing updater binary in zip
Click to expand...
Click to collapse
you can flash it after wiping /data
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work