Database Info

SM-T310 CUSTOMIZATIONS - Until some custom ROMs come along

Hi community. I bought my Galaxy Tab 3 8.0 some weeks ago, and (being a flash-o-holic, as many of you) have been eager to flash some new ROMS for stretching the capabilities of my new beloved device. Since of course it takes time for developers to create a ROM, I started testing some customizations and found them to work successfully, so I wanted to share in case you are in a similar situation.
First of all, none of the software in this thread has been developed by me, so credit goes to their legitimate authors
Also very important, this is all result of testing on my own device. i cannot guarantee this will work on your device, and I take NO responsibility on the results of replicating this procedures nor installing these applications on your devices. Since it's mostly about apks, it pretty safe anyway.
In order to be able to execute any of the instructions in this thread, your device must be rooted. Instructions to root your device can be found here:
http://forum.xda-developers.com/showthread.php?t=2386098
I have tested this on my SM-T310, but I see no reason why it should not work on the T311 or T315
Please, make sure to perform a nandroid backup before you perform any of these actions. I found I applied some modifications I wanted to rollback, and it was not possible,. That led me to the need to flash stock firmware and start over from scratch (for not following my own advice) :silly: In case this happens to you, you can always find the stock firmware at http://samsung-updates.com/
Great news is that Xposed Framework can be installed and works perfectly on the Galaxy Tab 3 8. And also, since the newest version includes the ability to download modules directly from the Xposed APK, you'll have the possibility to experiment a lot. Please be careful, always perform a Nandroid backup before intensive testing. The latest version of the Xposed Framework APK can be found at it's authors site:
http://forum.xda-developers.com/showthread.php?t=1574401 (Thanks to Rovo89)
Once installed, follow the authors instructions. You will be able to find and install new modules in the DOWNLOAD section of the application. Please remember that once you install a new module, you will need to go to the MODULES section of the application in order to enable it, and then reboot your device.
So far I have tried the following modules:
- App settings v1.5 (it will allow you to modify DPI for each application independently). It's very safe to use. Works great
- Boot Manager V1.1.3 (it will allow you to select apks you don't want your tablet to load during boot). Mostly safe, if any apks related stops working you need to just remove it from the Boot Manager list, and it should go back to normal.
- Wanam Xposed v2.0.5 (It includes many of the customizations from the Wanam ROMs for other devices such as the S4). In this case, you should be slightly careful. This APK was designed for a different device, and includes options that are not valid (such as disabling increasing ringtone), others that might generate issues (such as Enable Keyboard symbols, which is anyway useless, but can conflict with TAB 8 Samsung Keyboard APK), but mostly, it works great, and adds functions such as 4 way reboot, select multi windows applications, modify the number of tiles in quick settings, battery icon, and other very useful ones
- Nottach Xposed: which has many options in common with Wanam Xposed. This one did not show on the download section of the xposed framework apk, but you can find and download it from its author's thread. Same considerations applies as with Wanam Xposed. I am not sure if they can conflict with each other, so be careful.
As you can see there are many improvements we can already use in our dear Tab 8, you just need to try and verify (After performing a nandroid backup).
I also found a ZIP including the Sony Xperia Launcher and Walkman APK, created by Team Nocturnal for the Galaxy S3, that so far seems to work properly.
http://pc.cd/5z
I hope you will find this thread useful, and I encourage you to test different modules and alternatives and include your own experiences in this thread, so that we can all improve our Tab 3 8 experience.
Happy Testing!!!

thx ..the App Settings is just what i needed ....i am a fan of PAC rom .....and i just love to change the DPI of apps..... some apps are just to big :laugh: thx again

[ROM] Semi-stock/Super-clean/Tweaked/Rooted

I've been learning how to build a custom rom for the S5...
Finally got my first stable version that I'd love to share!
Special Features:
Stock Base
Rooted - SuperSU
BusyBox integrated.
zip-aligned
Build.prop tweaks for speed, battery, usb debug
Removed all Verizon/Samsung apps that I could possibly strip out - without having any problems in settings, etc.
(Except S Voice - I just skipped including that because it's useless to me.)
WiFi Hotspot - WITH NOTIFICATION TOGGLE
**** Almost all apps have been moved to /data/app - which means you can uninstall them, not just turn them off.
Replacements:
Replaced stock launcher with Holo Launcher HD
Chrome replaced with Firefox
Messages replaced with Handcent
Includes:
AdFree (Root)
Titanium Backup
I DO NOT WARRANTY THIS ROM IN ANY WAY.
INSTALL AT YOUR OWN RISK. DONT HATE ME IF IT DESTROYS YOUR DEVICE.
I've been running it on my device for the day and it's doing great!
Install instructions:
Use safestrap
Any ROM slot should be fine. I know it's not possible currently in safestrap to make a smaller system partition, but really only 2GB is needed for system.
I'd highly recommend a clean slot -- for some reason while testing safestrap wouldn't fully wipe the data partition.
PLEASE NOTE:
After initial boot, you will be sent through the Setup Wizard, as usual.
Immediately following completion of first boot, your phone will "go crazy" for a few seconds. The select wallpaper window will open (dont do anything), then the screen will go blank for a second.
* Setup Wizard may force close. DONT PANIC!! Everything i still working right. Just click OK.
I have set up a One-Time Init script to install the WiFi Hotspot toggle into notification panel, change the default lockscreen/homescreen backgrounds, enable USB Debugging, and to set up the initial Holo Launcher icon layout.
DOWNLOAD LINK:
MediaFire Old Version
Still being uploaded:
Odex Version Does not include Setup Wizard. If you can't live without it, get the old version.
MD5 = aefa00cdad2e3c50ab63332ba7ff106e
DeOdex Version
MD5 = 029093db318bf1d331a38d97573faa41
Screenshots below!
If you like my ROM please DONATE a couple dollars!

jake5253 said:
I've been learning how to build a custom rom for the S5...
Finally got my first stable version that I'd love to share!
Special Features:
Stock Base
Rooted - SuperSU
BusyBox integrated.
zip-aligned
Build.prop tweaks for speed, battery, usb debug
Removed all Verizon/Samsung apps that I could possibly strip out - without having any problems in settings, etc.
(Except S Voice - I just skipped including that because it's useless to me.)
WiFi Hotspot - WITH NOTIFICATION TOGGLE
**** Almost all apps have been moved to /data/app - which means you can uninstall them, not just turn them off.
Replacements:
Replaced stock launcher with Holo Launcher HD
Chrome replaced with Firefox
Messages replaced with Handcent
Includes:
AdFree (Root)
Titanium Backup
I DO NOT WARRANTY THIS ROM IN ANY WAY.
INSTALL AT YOUR OWN RISK. DONT HATE ME IF IT DESTROYS YOUR DEVICE.
I've been running it on my device for the day and it's doing great!
Install instructions:
Use safestrap
Any ROM slot should be fine. I know it's not possible currently in safestrap to make a smaller system partition, but really only 2GB is needed for system.
I'd highly recommend a clean slot -- for some reason while testing safestrap wouldn't fully wipe the data partition.
PLEASE NOTE:
After initial boot, you will be sent through the Setup Wizard, as usual.
Immediately following completion of first boot, your phone will "go crazy" for a few seconds. The select wallpaper window will open (dont do anything), then the screen will go blank for a second.
* Setup Wizard may force close. DONT PANIC!! Everything i still working right. Just click OK.
I have set up a One-Time Init script to install the WiFi Hotspot toggle into notification panel, change the default lockscreen/homescreen backgrounds, enable USB Debugging, and to set up the initial Holo Launcher icon layout.
DOWNLOAD LINK:
MediaFire
Screenshots below!
If you like my ROM please DONATE a couple dollars!
Click to expand...
Click to collapse
Nice to see another ROM pop up!
Sent from my SM-G900V using XDA Premium HD app

Nice! Can't wait to give it a go!
Sent from my SM-G900V using XDA Premium 4 mobile app

is there a way to use stock launcher???? i perfer stock tw launcher

jdog94 said:
is there a way to use stock launcher???? i perfer stock tw launcher
Click to expand...
Click to collapse
I know there is a link somewhere here on xda where you can download a zip with all the original apks. Check in the Verizon S5 general section.
Found it! Look in OP Here
Note on my ROM, I seem to have forgotten to remove the security policy updates app. feel free to remove it yourself.
/system/priv-app/SPDClient.odex and SPDClient.apk

[Mod] [CM11] ••The Ultimate Project™•• Collection

∆Thread navigator:
•What is ultimate project
••Why cm11
•••What is inside the package
••••How to install
•••••credits
••••••developers talk
•WHAT IS THE ULTIMATE PROJECT?
its a collection of mods and apps that will make your life with CM11 better than ever
••WHY CM11?
cyanogen mod is a free community and all most every one are using cm11 or 12 and i just though that it would be great to share my experience with you
•••SO WHAT IS INSIDE THE PACKAGE?
1.Quick boot mod (this will make your cm11 shut down and boot up faster)
2.quick boot.apk (this is for the unofficial cm11s if the quick boot mod didn't work you can use this app)
3.modded Google camera (better image and video quality)
4.greenify(battery and ram saver by hibernating the background apps)
5.Gapps xxsmall edition( with Google now support and gmail)
6.universal blunder ( a script to delete all unnecessary files and junks on all mobile brands)
7.adrenaline engine boost( a script to give you a better performance and gaming)
8.Emoji (all android 4.4 emoji)
9.lollipop sounds (the new android 5.0 sounds)
10.project mod treble swap ( this will gave you more ram which means more speed and performance )
11.project mod boost script special edition ( this will gonna make your android performs like an alien device )
12.lollipop launcher( the new android 5.0 launcher)
•••HOW TO INSTALL:
download the package from here
https://db.tt/thcX2rkH
1.go to recovery and flash the package
2.to activate quick boot mod go to developer options
3.to use an app just go to app drawer and open it
4.to activate adrenaline engine go to terminal and enter the code
su
boost
5.some greenify features need xposed framework
6.project mods are automatically activated
•••••CREDITS:
1.God
2 @Abhinandan Trilokia for the universal blunder
2 @ImbaWind for adrenaline engine
3 @madkita for Google apps
4 @madkita for lollipop sounds
5 @k1ks for project mods
6.Cyanogen for cm11
7.speed software for root explorer
8.mobiant for lollipop launcher
9.dropbox for the cloud server 10 @blade44 for the quick boot mod
11.if your app or mod is here and i didn't mention your name on credit please pm me so i can add you
••••••DEVELOPERS TALK:
if you you know an app or script or mod that will help just write it and I will add it on the next release
if you like my work and want to do me a favour just click the thanks button and no thing else
Now try it and give me your feedback
Please keep the threat clean

Hi there, I don't think your file is correct because nothing happens after flash. I am sure I've d/l the full file correctly.

i have flashed the file over cm11 armv6 and its working did you wipe?

madkita said:
i have flashed the file over cm11 armv6 and its working did you wipe?
Click to expand...
Click to collapse
Yes, I do wipe and make a clean flash from scratch. My phone is HTC one X with CM11 ROM.

but i say no need for wipe

open your app drawer if you found the mentioned apps that means installed successfuly

madkita said:
open your app drawer if you found the mentioned apps that means installed successfuly
Click to expand...
Click to collapse
Sorry, maybe I didn't make it clear. what I was doing is fully wipe and flash CM11 ROM for HTC one X from scratch, and afte rall my google apps abd data is download back to normal from server, and then I flash your mod WITHOUT WIPE. But I don't see any app or other mod inside the system after reboot. I check it with root explorer. So I think I do follow your step, right ? Do you ever try to clean-wipe flash from scratch and then flash your mod ?

i checked it again and it works without aby problems on a clean install

chihliouma said:
Sorry, maybe I didn't make it clear. what I was doing is fully wipe and flash CM11 ROM for HTC one X from scratch, and afte rall my google apps abd data is download back to normal from server, and then I flash your mod WITHOUT WIPE. But I don't see any app or other mod inside the system after reboot. I check it with root explorer. So I think I do follow your step, right ? Do you ever try to clean-wipe flash from scratch and then flash your mod ?
Click to expand...
Click to collapse
Check if you had system partition mounted when you were installing the package, if there weren't any files installed thetn this might be the problem.

@shiftyHungary did it work for you

Good Luck !!

can any one confirm that it works

Wowza...just beathed alot of extra life into my ZTE Awe. Lolipop launcher and quickboot dont work on my device, but i can live without them. Well done

Quick boot mod only works on official cm11 builds and some other builds like armv6 build but the quick but apk works on any android device

The app just force closes whenever I try to open it. We at the Awe forums on androidforums are running an unofficial build, so it makes sense to me the mod wouldnt work but the app is not as well. Again, I can do without. Everything else, minus the launcher, appears to be working.
Though I can't find any difference when running the "boost" command. What is it supposed to do exactly?

its apically for games

Well again I didn't notice much of a difference with or without running it. Real Racing 3, GTA San Andreas and Modern Combat 4/5 run significantly better than before the mod. I was able to even record some decent game plays on each with Rec Screen Recorder with only about a 10fps drop and minor lag, something I struggled to do initially. All in all, I'll confirm this works and have already spread the word to my fellow Awe users.
Many thanks for your hard work

[Q] Nexus 5 [What After Rooting?]

Hello Friends.
I know what could be done on iphone after jailbreaking using cydia. But from past few days I have been using Nexus 5 and decided to root it.
But I'm bit confused, what is next to customize my phone as everyone on internet claims that it gives us full access. Please share some of your knowledge.

You don't have to root to customise .... There are many apps you can install for custom experience eg. Nova launcher that I use is amazing for customising your experience and its a great starting point (but does not need root) but rooting itselfbdoes open the door to deeper more functional features using apps like titanium backup to backup literally every bit of info, app and all associated data ....and other apps like tasker that can enable full automation which allows you to do things like set your phone to unlock automatically when connected to your home wifi ...or silence your phone automatically during work hours etc...

Can install costum ROM .. can install multiple ROM's using multi ROM.
Try closed.. Google it
... Mentioning just a few

gD ™ said:
Hello Friends.
I know what could be done on iphone after jailbreaking using cydia. But from past few days I have been using Nexus 5 and decided to root it.
But I'm bit confused, what is next to customize my phone as everyone on internet claims that it gives us full access. Please share some of your knowledge.
Click to expand...
Click to collapse
After rooting, I like to change the DPI (by making a simple change to the build.prop file). The stock value is 480. I like 422. It fits more on the screen.
schmos said:
Can install costum ROM .. can install multiple ROM's using multi ROM.
Click to expand...
Click to collapse
technically, you don't need to be rooted to run a custom ROM (or a custom recovery). You just need an unlocked bootloader for that.

There are a lot of things you can do after rooting. I have the following installed: AdAway to block advertisements, xposed to customize my rom and apps, IOS Emoji here is a flashable zip I made: https://docs.google.com/file/d/0B9UOVv2yynmYeUVWY0tJNGtBanM/edit?usp=docslist_api, install MultiRom to try out different custom ROMs.
Hope you like it.

ROM Computerfreek274_Unlocked.49_1.3.7 6/5/2016 Tether, Advanced Calling, Audio Mods

Computerfreek274_Unlocked_1.3.7 Based from Stock 5.1 .49​
Disclaimer: Please Read if this ROM or any software kills your phone in any way. I am no way to be held responsible. Please read I Also will not be responsible for any data loss. Backup you data we have twrp now.
All ROM's,Audio Mods, Pon-3, Kernels, ect Downloads can all be found under Download here below.​Download Here
Please Read! The Whole OP and how to install.
Start Here for Update 1.3.7 6/5/2016 .49 based Please READ
Computerfreek274_Unlocked.49_1.3.7 Update
Based from .49 OTA update 5/15/2016
Change Log
.49 OTA Update
06/05/2016 Cleaned up some more verizon junk.
Bloat Free
Hotspot Tether
Audio tweaks and Vol Steps *You can still download from my OP the tweaks or V4A for better sound.
Root
Busybox
xposed ready just download and flash after you setup the ROM.
Pon-3 and other audio mods flash after your 1st setup.
New Radios
Small Tweaks
HOW TO INSTALL ! 1.3.7 Updated 6/05/2016
1. Download firstEncounter's .49 Bootloader/Radio Pack from here. Big Thanks to firstEncounter for his great work and great img packs.
2 Download Computerfreek274_Unlocked.49_1.3.7.zip
3. Flash firstEncounter's .49 Bootloader/Radio Pack.
4. Flash Computerfreek274_unlocked.49_1.3.7 Verizon or non Verizon build.
3. Wipe Cache and reboot and enjoy.
* if you have already updated your radios and bootloader to .49 then you can just flash 1.3.7 or newer.
If you are doing a full wipe! Wipe data and cache all at the same time. then do steps 1 and 2
Flash radios pack 1st then flash ROM. NOTE: Flashing my IMG pack will upgrade your bootloader so never re-lock your bootloader thinking you can just sunshine YOU CAN'T after you upgrade. Yes you can still re-lock if you need to return the phone
Any Bugs in 1.3.7 ?
No not that I have seen
Slow 1st boot if your upgrading and not doing a full wipe.
1.3.5+ END HERE PLEASE READ ABOVE
Outdated Info and Chang logs.
Bugs.
With Verizon messenger Plus app if you use back camera with flash phone will crash. This is only in the verizon msg app.
work around is to take pic with camera then attache the photo and send.
Change-log Updated 04/04/2016
04/04/2016
Verizon Build There is 2 versions your Standard build and battery save. Battery save only for Verizon users this helps with battery drain you get with Verizon network over LTE.
Performance tuning is turned on on the battery save mode. So the phone needs time to settle in a bit before it feels 100% in my testing it looks to save around 5% or more over standard build " I am loving the battery save build myself. remember this is based on what I have running results will vary per user"
Fixed battery faster battery drain from 1.29 in standard build and batter save.
Removed .mp4 demo video to save space.
Removed and updated moto camera to the last build. This gives users an option to uninstall update if they like same with my Verizon and some other apps.
Fixed emoji's and updated to newest android from MM.
Non-Verizon fixed APN settings so it will pick up your APN from your sim / network.
Non-Verizon build Faster 3g 2x data. " Remember it can only go as fast as your network gives you" But I did tweak it a bit.
Non-Verizon Build Removed My Verizon and other Verizon apps that got in from 1.2.9.
Non-Verizon users You will not be getting an battery save build. This is due to GSM networks. Plus way to hard for me to test if it will save battery. I do believe the non-Verizon build is already much better on battery on Verizon build. This is due to that you have non of the Verizon apps running.
This change log maybe missing a few things I have done a lot and tested a lot over the past few weeks to get this ver just right.
3/2/2016
1.2.8 Verizon Build Updated to address a few Bugs that have been found in verizon build only.
Fixed xposed bug.
Fixed Reboots with xposed.
Fixed audio mods.
02/06/2016
Removed HP Print and Google Print *Download from play Store if you need it. Fixed where when I removed it in the past it did not work from play store HP system drivers are still installed.
Removed Moto care plus one other moto app.
Updated network settings Faster Verizon lte speeds mostly upload.
Faster Switching from 3g to LTE.
Made changes to make Xposed v80 more compatible.
Made Changes for new ver of Viper4Audio audio mod to work with droid turbo if you install it. Pon-3/v4a will also still work.
Few other bug fixes.
Better power saving 1/11/2016.
Put Stock Command center back in. 1/11/2016
Removed Turbo 2 command center download and flash from here 1/11/2016.
Updated My Verizon app to newest apk. 1/11/2016
Added Turbo 2 wallpapers. 1/11/2016
Removed some old moto files that where not needed. 1/11/2016
Audio boosted on app apps and in-call and all codecs. 1/11/2016
Updated Init.d support in kernel 1/11/2016 Please search for init.d tweaks in google for lollipop.
Misc Small fixes and tweaks 1/11/2016
Fixed memory removed lag. 1/11/2016
Fixed up Audio mixed boosted audio mid-range pre-installed 1/11/2016
Fixed My Verizon SSO login 1/11/2016
Removed apps and files.
Amazon apps
Slacker radio
Bug2GoStub
GooglePinyinIME
Translate
BodyGuardApp
fswriter
install-recovery.cfg
recovery-resource.dat
recovery-from-boot.p
Tweaks updated and fixes
Heap size now 72 was 32.
GPU speed tweaks fixed from 1.2.2.
Updated Wireless tweaks.
More free ram for apps. "Tweak"
Faster app loading "tweak"
zip aligned.
4g LTE Speed and locking/Switching.
Fixed Audio buffers in 1.2.4
Battery save stuff. "Tweak's"
I also cleaned up some other stuff. and more fixes. Smaller download size.
Installing Update
Flash Right over any of my ROMs or Mofo Img's using TWRP.
After flashing rom you can Flash Xposed if you use it V79 Download here.
After install Please wipe cache and reboot. If you did not do a clean full wipe then. Please let the phone settle in a bit. So it can update a bit around 1/2 hours after some updates for it to settle in nice for it to show it's tweaks.
Enjoy!
Also Get your updated Xposed here v80
Benchmark Screen shot here with lots of my apps installed.
Download 1.2.3a ROM HERE DeOdexed Non-Verzion users Download 1.2.3a then read Post #2 for adding better support for global services.
You can always find more help and support on my website computerfreek.com​
Old Change Logs see above
ChangeLog
Computerfreek274_Unlocked_Deodexed_1.2.3a 12/09/2015
Removed Verizon protect
Removed Office
Most Verizon apps other than Hotspot and My verizon can be uninstalled. If you see them in your apps you can now uninstall all but them two.
Boosted media buffers.
GPU speed and ram tweak.
lower background apps running at one time by 5.
Updated apps
Google play
Google play services
Moto camera.
Moto gallery
Gmail
Chrome updated and put back in.
Translator
And a few others I can not remember.
Build tweaks I think this will help with play service crash. I have not got any so far. Only time will tell.​
1.2 - 1.2.2
Faster 1st boot.
Optional Global Ver for none Verizon users. Find it under downloads.
Audio Boost v2 The best In call Audio on the droid turbo. (New)
Deodexed build. There is also your standard odex build. (New)
Native Tether/Hotspot tested and working 100%
Removed more Verizon apps. This is the last of the Verizon apps i can remove that are needed for the system. Please remember if you remove or freeze My Verizon app it will disable your advanced calling.
Verizon Messenger has been removed. This can be re-downloaded from google play
Fixed Build.prop removed old PON-3/V4A Settings.
Fixed host file put it back on the system as we don't need it in data anymore.
Xposed and pon-3 Is optional add on I did this in case you where going to use other audio mods or none at all. This opens up better support for users of my Rom some users do not like pon-3. Just You can download all needed files with the download.
Cleaned up amazon junk in /ect
Much faster over all bit more ram and cache speeds better R/W speeds.
Faster 3g and wifi.
Removed Boot animation. (Replace with your own if you like.)
Features:
Audio Boost v2 The best In call Audio on the droid turbo. (New)
Deodexed build. There is also your standard odex build. (New)
All the best tweaks and audio mods from my 1.6 images.
Full root with unlocked bootloader via Sunshine.
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - From Stock to Global.
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional AdAway.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android I optimized the system for any audio mode you use. You can flash PON-3 from my downloads.
Enabled for XPOSED Updated to newest ver. Optional download flash via twrp and install APK. i put the needed ver and files in downloads. Xposed needs to be flashed.
Audio Boost Mods
Download Here
1st one Stock No Audio Boost (Stock)
2nd Mid Range Audio Boost ( Mid Range no gain boost Stock Max Audio 84% Mid range Max 90%)
3rd High_Gain v2 ( Boosted Gain and Max volume At 94%)
How to Install​
How to install
Backup Your Stuff!!! Photos and more !!! Use Twrp to do a full system backup!!! And then Copy it to your PC save it forever!
If you already have done step 1 and 2 go to step 3.
Step 1 Phone bootloader must be unlocked via sunshine root. I will no longer help users unlock please see sunshine If you need an none xposed ver use @firstEncounter v3 listed here. I blocked my no xposed img from downloads. I know it worked for most users but there was a few it did not and hung up on sunshine server blocking there IP. @jcase recommend you use @firstEncounter v3 or update to stock .44 then unlock with sunshine.
Step 2 Install Twrp Recovery Get it here.
Step 3 Enter recovery Copy my rom/zip to your phones storage device.
And any other options your download from here xposed and PON-3 put all zip's on phone storage. And flash/install in recovery computerfreek_Unlocked_1.X 1st then install/flash xposed,Pon-3 zip's
Step 4 In recovery click install select my rom .zip and slide to install
Step 5 Hit home and go to wipe for best results slide bar to do factory reset.
Step 6 Reboot system
Step 7 Your done setup your phone xposed and pon-3 audio if you install it.
Step 8 If you flashed xposed you need to install the APK now.
Please remember this is a hobby for me and my son who is 13 years old. Any donations we get are used for web and file hosting also to help with the cost of the internet. We try and do are best to give you support. We work very hard keeping everything up to date. We do not make money off this we do this to help other like us. Remember if you like to help to keep this going you can send donations to google wallet to [email protected] or paypal [email protected]. Thank you So much for supporting this hobby.​
​
Credits go to.
@jcase For his great work and the rest of the team. Not just for the great unlocked bootloader, But for everything he has done. Thank you.
Thank You Theroot.ninja for the Sunshine See there website here.[/CENTER]

@cbalt Has made this very global friendly flashable zip for my ROMS This will give you better support for GSM in the USA and overseas. It will also remove all the Verizon junk for you as you do not need it if your not on Verizon. . @computerfreek274 and @cbalt will offer support for this the best we can. It is hard to give full support if we have no way to test the service provider you have. For best support have your APN's for your service and check that they are in your phone already. Please read below for more info and setup. As always backup your data. And remember we are not responsible for any data loss or if this software somehow kills your phone.
THIS IS NOT FOR VERIZON USERS. This has been tested on 1.2.3a
This is an update to my Removal Script. A few things have changed. First off since this is only for Global users to begin with, I have updated it to also update your Build.Prop, gps.conf, and apns-conf.xml. There are also 4 Different Versions now.
REBOOT AND FLASH AFTER GOING THROUGH THE SETUP WIZARD.
The files without Verizon in their name remove, Notice TTS aka Text To Speech and Velvet in there which is the Google APP aka Google Now. It removes everything I personally do not use. The files with Verizon in their name will be better suited for you if you don't want it slimmed down. In the next day or three I will create the .zips required to reinstall all the stuff removed in both along with a file to only update Build.Prop, gps.conf, and apns-conf.xml.
BasicDreams
CloudPrint
com.customermobile.preload.vzw
com.motorola.android.nativedropboxagent
com.verizon.ims.jar
com.verizon.ims.xml)
com.verizon.os.jar
com.verizon.os.xml
com.verizon.phone.jar
com.verizon.phone.xml
com.verizon.settings.jar
com.verizon.settings.xml
com.vzw.android.smart.jar
com.vzw.android.smart.xml
ECID_VZW_Quark
FaceLock
GoogleFeedback
GoogleTTS
HPLegacyPlugin
HoloSpiralWallpaper
HotspotLauncher
KnowYourDevice
LiveWallpapers
MotoDemo
MotoFolio
Motorola_MyVerizonMobile.mp4
Motorola_VerizonMessages_HowTo.mp4
MyVerizon
NoiseField
PhaseBeam
Quickoffice
VMobileSecurity
VVM3
Velvet
VerizonSSOEngine
VerizonWireless.wav
VisualizationWallpapers
VzwAVS
VzwCbsLoader
VzwController
VzwDeviceSetup
VzwFamilyBaseCompanion
VzwLocationAgent
VzwPhoneService
VzwSecureSettings
VzwSettingsExt
vzwPhoneExt
The Files With Verizon in their name remove
com.customermobile.preload.vzw
com.verizon.ims.jar
com.verizon.ims.xml)
com.verizon.os.jar
com.verizon.os.xml
com.verizon.phone.jar
com.verizon.phone.xml
com.verizon.settings.jar
com.verizon.settings.xml
com.vzw.android.smart.jar
com.vzw.android.smart.xml
ECID_VZW_Quark
HotspotLauncher
Motorola_MyVerizonMobile.mp4
Motorola_VerizonMessages_HowTo.mp4
MyVerizon
VMobileSecurity
VVM3
VerizonSSOEngine
VerizonWireless.wav
VzwAVS
VzwCbsLoader
VzwController
VzwDeviceSetup
VzwFamilyBaseCompanion
VzwLocationAgent
VzwPhoneService
VzwSecureSettings
VzwSettingsExt
vzwPhoneExt
Global GSM IS for full GSM MODE.
Global is NOT for full GSM Mode.
Download : https://androidfilehost.com/?w=files&flid=45270
DO NOT ASK FOR ETAS, It will only make me work slower.

how to

What does the BL unlock let us do that MOFO hasnt?

Michaelmansour1997 said:
What does the BL unlock let us do that MOFO hasnt?
Click to expand...
Click to collapse
Full root! Full read write, access to kernel, android pay may work. As an user you will have full root so you can change your own fonts, host, emojis and so much more. Plus this is going to also let users that where stuck on stock 5.1 high and dry unlock and have root also. Think about this if you need to replace your phone it is shipped with 5.1 now this will allow you to unlock it and get back to root.

computerfreek274 said:
Full root! Full read write, access to kernel, android pay may work. As an user you will have full root so you can change your own fonts, host, emojis and so much more. Plus this is going to also let users that where stuck on stock 5.1 high and dry unlock and have root also. Think about this if you need to replace your phone it is shipped with 5.1 now this will allow you to unlock it and get back to root.
Click to expand...
Click to collapse
Sweet, will we be able to get CM13 on it?

Michaelmansour1997 said:
Sweet, will we be able to get CM13 on it?
Click to expand...
Click to collapse
Yeah working builds now. So when we get an unlock I will just need to test.

computerfreek274 said:
Yeah working builds now. So when we get an unlock I will just need to test.
Click to expand...
Click to collapse
niceeeeeeeeee

will it work on turbo 2 ?

mike_augie said:
will it work on turbo 2 ?
Click to expand...
Click to collapse
the BL unlock - nopes

I was getting my phone ready for the Sunshine release and downloaded it onto my phone. I'm currently running 1.6b pon with xposed baked into the system. When I tried Sunshine it said I must uninstall xposed. Is there a way to do that without wiping data and flashing an older system?

djbling said:
I was GE ting my phone ready for the Sunshine release and downloaded it onto my phone. I'm currently running 1.6b pon with xposed baked into the system. When I tried Sunshine it said I must uninstall xposed. Is there a way to do that without wiping data and flashing an older system?
Click to expand...
Click to collapse
Yes go to my site computerfreek.com and download the none xposed img I made for this.
Or direct link here to download
@djbling I updated OP and my website for more info. When sunshine is released for are phones we will have more info. We may have to flash are bootloader via flashboot when the time comes I will update the OP.

Thanks! Computerfreak. Glad to see your on top of it! That was a real fast reply!

djbling said:
Thanks! Computerfreak. Glad to see your on top of it! That was a real fast reply!
Click to expand...
Click to collapse
Yeah and the good news is most users are on the .44 kernel so all you have to do is flash the no xposed ver of my img via mofo. Then unlocked via sunshine. Reboot and now you will have full rw root and still be on my img. Re-install xposed framework and your done.
You can then install twrp and do a full system backup via twrp recovery and save a copy of it on your PC too. Then sometime after that I will have all kinds of flashable roms from stock to cm and aosp.
Cm and aosp and nexus will need testing so I can get voice mail working and advanced calling on nexus and aosp roms. As for cm it may need a bit more time and testing.

Sunshine 3.2 beta for droid turbo is out!
---------- Post added at 04:51 AM ---------- Previous post was at 04:49 AM ----------
http://forum.xda-developers.com/showpost.php?p=64027688&postcount=4064

Now that those of us that were stuck on locked 5.1 have unlocked bootloaders, how do we acquire permanent root? I'm new to the while unlocked bootloader thing.
Sent from my XT1254 using Tapatalk

Once your bootloader is unlocked, flash the twrp recovery and a rooted image. See the OP

This is exciting stuff! Thanks so much to CF for this thread. I was scrolling through 44 pages of the bootloader unlock thread looking for specifics, but as per usual CF has laid it all out for us here in an efficient and easy to understand post. We are lucky to have him in this community.
Sent from my XT1254 using Tapatalk

The "Download Computerfreek274_Unlocked_1.0" link doesn't work - getting not allowed/access denied

mad3963 said:
Now that those of us that were stuck on locked 5.1 have unlocked bootloaders, how do we acquire permanent root? I'm new to the while unlocked bootloader thing.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
For now you can go and download any one of my 1..6 img under downloads at computrrfreek.com unzip enter fastboot mode and fastboot flash system imgnamehere.img let it go when done enter recovery wipe cache and data. Reboot and not you have all the perks of my img and full root.
I am working on flashable img's. but I am going to have to call it for tonight 1:30 am here. I will test more when I get up.