Related
Update: There seems to be a popular slang term "cook" going around on this thread as well as pm's. If you are having a issue because you didn't read the OP, I will not take the problem seriously. All I will tell you is wipe and reflash! Call me whatever you will, but I DO NOT USE KITCHENS. Things I do use:
1. My brain
2. My computer
3. Autosign script
4. XDA obviously
That's it!
New things added and removed, check the changelog below. If you have a g1, please rate and comment on my g1 thread here: http://forum.xda-developers.com/showthread.php?p=7656698#post7656698. This way I know what devices are having issues. So far no major issues have been reported, and I would like to keep it that way.
After flashin the rom and gapps, Set your phone up the way you want it. If you want to use Compcache instead of swapper2, then select "deny" when prompted from superuser. Also if you want to remove Swapper2 completely with adb:
adb devices
adb remount
adb shell
cd /system/app
rm Swapper2.apk
It should be gone instantly. This app is only 82.4kb large in size, so if you think you are going to be saving a lot of space on your phone, then you will be dissapointed. If you just can't stand it being in your app drawer you can also remove apps with titanium backup for free on the market, or Astro file manager (also free on the market).
If you want Swap instead of compache, you will need to select "allow" when prompted. You will need to disable Compcache in CM Settings and reboot.
Once you boot up open the swapper2 app and set it up the way you want. I have mine set to 32mb for the size, and 20 swappiness for my swap file, but I may go back to using compcache. Also select safe unmount for mounting sdcard so that your swap is safely unmounted before your sdcard mounts. Once you unmount your sdcard, you can go to swapper and select the on button to enable it again.
Then go to CM Settings > application settings, and select "Allow application moving". Don't change the install location. That's it, now your all ready to install as many apps as you want to your ext partition. It seems that people are having good luck with flashing from v1.1.1-v1.1.2 with no wipe at all. This is a good sign that my no wipe options is working for now, we will see with future updates, but I'm confident that no wipe should be necessary at all from here on out.
You will need to flash the new gapps 20100912 If you want things like chrome2phone. You also need to install the chrome to phone extension on your chrome browser here: https://chrome.google.com/extensions/detail/oadboiipflhobonjjffjbfekfjcgkhco
Thank you Cyanogenmod, Firerat, ChromerSmith, Dumfuq, and anyone else I'm forgetting for making this all possible. If you like our work, buy us a beer.
Requirements: This rom supports G1/Dream/Magic/Sapphire [32b] devices only. You need the Danger SPL. If you want apps2ext partition then you need a ext3 or ext4 partition on your sdcard. I am not responsible for broken phones or sdcards!
Changelog
1.1.2
-Removed ADW and added LauncherPro, seems to run better!
-Added Chrome2Phone to gapps (You must download the new gapps if you want this)
-Added Swapper2 to rom for people who want swap instead of compcache.
-Added CMTheme folder, and LauncherPro Backup folder. If you wish to use these, you must extract the zip files to the root of your sdcard. Go to restore theme in CM Settings > User Interface > Tweaks extras, and then select a theme. There will be a option for SparksMod theme, select this and it will change the colors to white. For LauncherPro just restore settings in the settings for LauncherPro.
Download ROM:
All Downloads: http://www.mediafire.com/?1vh6itlcpdxdj
Rom MD5: 097bfafbc715594f634ca7b7ce9ec067
ROM OC'd MD5: 703cab98497b1c774d505b750ed4c1f5
Gapps MD5: 22eb062054bd18c7b5410d7271b21c26
1.1.1
-Added the latest dumfuq's overclock kernel to the rom as a separate option
-removed the newest gapps from the rom, seems to run better this way, I was having some force close issues with gmail, plus it's much much faster!
-The newest ADW Launcher is included with this, it's much faster now!
1.1 Stable, built on CM-6.0.0-DS
- Added new firstboot.sh method for apps2ext partition. Install as many apps as you want after first boot and never have to reboot or use any terminal commands to move apps!
-Moved boot animation to /data/local/
-New gapps not themed, speed seems to be better
-Added black keyboard back
-Removed Wallpapers, Cyan has some really nice new ones I thought I would use for awhile
ADW v1.3.4 is included
v1.0 Stablish, built on top of the 08/25/10 nightly build:
ADW v1.1.3 is now included in the nightly builds
-Redid the theme again. The theme is final this time, with a lot more icons in the app drawer, and newly added liquid battery icons. I optimized all the icons for better performance and speed with the help of Lithid.
-Removed unnecessary themed stuff that could of been slowing the rom down, like the black keyboard and a few other things
AMS v0.3.3
-Added Chromersmith's Script kanged
AMS v0.3.2 Built on nightly build 08/22/10
ADW Launcher v1.1.1!
-Added Wireless tethering
-Fixed black background on launcher from previous version
-Added gapps to rom so as not to have to flash separately anymore!
-Changed the whole theme!: Changed battery icon to blue with 6 lines and turns red when battery is low. Also changed all app drawer icons to a black darker theme and removed settings menu icons. Changed half the wallpapers again lol. Let me know what you think of them.
-Removed some ringtones and added about 5 of my own, hope you like them.
-Added firerat's patch to rom so as not to have to download and place on sdcard anymore. see instructions below.
AMS v0.3.1 Built of off the latest nightly build 08/19/10
-Optimized all wallpapers
-Stuff added: New Ubuntu Launcher icon, all stock ringtones are back
AMS v0.3 Completely overhauled from RC3
-Stuff added: Everything except for the launcher: Boot animation, all wallpapers, theme. Themed gapps (quick search web box, and genie widget)
-Stuff removed to save more system memory: Google voice (available on the market for download onto external storage), and a lot of ringtones.
v0.2.1
-removed blurred vision 2 boot animation (just wasn't running well), and replaced with droid (boots much better)
-Added Black Keyboard
v0.1 from latest nightly 081310:
-Removed Rom Manager to save on space, download it from the market
-Added HTC ADWLauncher
-Added VatSense 1.6.1 Framework
-Added 15 wallpapers
-Added Blurred Vision 2 boot animation
I am open to feedback on any changes or ideas anyone has for future improvements.
Instructions:
Full wipe required if coming from anything other than SparksMod-1.1.1 I can not guarantee that the no wipe thing will stick. These roms are changing constantly since they are still in the development stage, or at least until Cyanogenmod is completed with cm6 development for the dream/sapphire.
Apps2ext partition is now automatic. Make sure after first boot, go to CM Settings > application settings, and select "Allow application moving". Don't select a different install location. That's it, feel free to install as many apps as you want worry free from reboots to move apps, slow boot times, or running terminal commands to move the apps to ext when you get low on space.
You will need to change the clock color and date color as with any blackbar mod in CM Settings, or use the xml folder from my downloads folder. Extract the contents of the zip file to the root of your sdcard, then restore theme as usual in CM Settings.
LauncherPro Settings: Instead of listing my current settings, feel free to download and use the LauncherPro backup settings from my downloads folder. Extract the contents of the zip file to the root of your sdcard, then restore settings in LauncherPro.
I recommend downloading or installing SetCpu so you can control the speeds if you are using the overclock kernel to see what works good for you as far as battery life and speed combined. I set mine at 596mhz and it's still fast without too much battery drain.
-Spare Parts settings: Set transitions windows and animations to fast
-Set CM Settings > Performance to "disable surface dithering", "lock home in memory", enable "JIT".
For future theming and modding development: https://www.paypal.com/cgi-bin/webs...bn=PP-DonationsBF:btn_donate_SM.gif:NonHosted
My father just installed this on his phone and is very happy with it. THANKS!
Ok. Been using this Rom for a couple days. So far everything is smooth and fast. Did a no wipe upgrade to the oc'd version second day. Had one time that a reboot deleted my apps and one force close when I went to settings>sound (settings force close). May have to do with no wipe upgrade? Battery drain is normal for froyo. That's it so far.
Going to nandroid back to standard version since I will never go over 576 anyway.
Everything is super fast and responsive. Very stable so far. Best screen rotation time on froyo. Liking the launcher pro as well. Thank you for the cm ui and LP settings zips btw.
Mt3g. No swap. CC enabled. Set CPU at 245/576. Everything else set up normal.
Great job. Keep it coming. Thanks for your hard work.
Sent from my HTC Magic SparksMod using XDA App
Installed it on my wife MT3G and working like swiss watch, no problem whatsoever, been running it for more than 48 hrs allready. Everyting works, no FC's no reboots at all. Excellent work. Waiting for the new improved version. Thanks a lot.
Sent from my HTC Dream SparksMod using XDA App
is there any possible way to update the Launcherpro to v0.7.8.1??? I've tried force closing it, and install over it, but it just fails, and it won't let me uninstall it... any help would be greatly appreciated.
What was your method
Sent from my HTC Magic SparksMod using XDA App
johnson8cyl said:
What was your method
Click to expand...
Click to collapse
not sure what you mean
Method of uninstalling and installing. Or attempted method
Sent from my HTC Magic SparksMod using XDA App
DaMyth said:
is there any possible way to update the Launcherpro to v0.7.8.1??? I've tried force closing it, and install over it, but it just fails, and it won't let me uninstall it... any help would be greatly appreciated.
Click to expand...
Click to collapse
you can remove it via terminal emulator
su (enter)
mount -o rw,remount /system (enter)
rm -r /system/app/appname.apk. this way you can remove any app that is in the system. good luck.
cesarbric said:
you can remove it via terminal emulator
su (enter)
mount -o rw,remount /system (enter)
rm -r /system/app/appname.apk. this way you can remove any app that is in the system. good luck.
Click to expand...
Click to collapse
If I'm right if you have the new launcher.apk in your sdcard then after you do this you can copy the new one to its spot from your sdcard.
cp /sdcard/appname.apk /system/app (enter)
reboot (enter)
Let it reboot and you should have the old removed and replaced with the new.
Correct me if i'm wrong.
Ni
johnson8cyl said:
If I'm right if you have the new launcher.apk in your sdcard then after you do this you can copy the new one to its spot from your sdcard.
cp /sdcard/appname.apk /system/app (enter)
reboot (enter)
Let it reboot and you should have the old removed and replaced with the new.
Correct me if i'm wrong.
Click to expand...
Click to collapse
Sent from my HTC Dream SparksMod using XDA App
If you have the new apk in your sdcard you can use that command to installe it or any file manager apk like astro or any of your choice.
cesarbric said:
Ni
Sent from my HTC Dream SparksMod using XDA App
If you have the new apk in your sdcard you can use that command to installe it or any file manager apk like astro or any of your choice.
Click to expand...
Click to collapse
Also make sure to do a nandroid backup, just to be in the safe side.
Please refer to the g1 android development link on the OP, this thread is out-dated, and I don't have enough time to manage both threads right now.
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
How to install?
Sent from my Vodafone 858 using xda premium
polac said:
How to install?
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
VyrruS said:
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Click to expand...
Click to collapse
I know how to make the touch work in our devices, i'll send you the fix via fb VirruS
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
polac said:
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
I have tested it now and it goes into aroma. Try downloading it again, it may be a bad download.
What we need to wipe and mount before flash?
polac said:
What we need to wipe and mount before flash?
Click to expand...
Click to collapse
The installer mounts and wipes everything you need!
Download again and it continous saying installation aborted
polac said:
Download again and it continous saying installation aborted
Click to expand...
Click to collapse
Tell me how you install it
With clockworkrevovery
i applied the fixes but now it bootloops and then boots into recovery
Sent from my U8160 using xda premium
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
today i will upload a vid showing everything i did and what happens
Sent from my U8160 using xda premium
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
pikakai said:
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
VyrruS said:
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
Click to expand...
Click to collapse
no problem and good luck
Sent from my U8160 using xda premium
Any news?
CM9 can't boot with new version too
Sent from my U8160 using xda premium
Which is the best V6 configurations for U8160?
VyrruS said:
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
Click to expand...
Click to collapse
any news?
Sent from my U8160 using xda premium
is development on this rom dead or something?
Sent from my U8160 using xda premium
pikakai said:
is development on this rom dead or something?
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
I haven't got ICS yet, and I haven't got any more ideas what to put inside AROMA..if you give me ideas, I will mare a 1.3 version. Moreover, if anyone could fix ICS, I'd be grateful.
Stock 4.4.4 ROM (KTU849) for WiFi Nexus 7 (2012) Grouper
Hi! This was created using @dsixda's kitchen (which I had to tweak for our device to get working). This was created by unpacking the latest KitKat OTA (KTU84P) and adding SuperSU/busybox...
Featuring:
Stock Android 4.4.4 KTU84P for Nexus 7 (2012)
4-way power menu! Thanks @cargobr151 - Need to get an update or figure out how to do this for now hopefully we can use GravityBox...
Google Experience Launcher (GEL) or Launcher2 (NOGEL) - you will be asked which to use on first boot. Don't be afraid to pick "always use" you can change the default launcher at any time in Settings --> Home - What happened to GEL? Just grab the Google Now Launcher from play store (no room on /system partition)... If coming from a prior version with GEL and not wiping data you should be fine.
Busybox v1.22.1 (needed for Trickster MOD)
SuperSU 2.00 with latest SU binary
Odexed & Deodexed
FOTAKill.apk in /system/app to prevent future OTA notifications (thanks for the suggestion)
DEODEX (DEODEX is here for themers and by request)
v1.6 - MEGA https://mega.nz/#!mZ1UUYjR!7tJG3tS7i6qDswEAEZ37J1fWjdOEenrKBs_XFwXKAxk
v1.6 - AFH https://www.androidfilehost.com/?fid=529152257862728316
NOTE DEODEX takes longer to boot than ODEX on FIRST boot after wiping dalvik!
md5 - 92013590d4bb58d628cf7242a2893e57
ODEX (Stock is Odexed from Google)
v1.6 - MEGA https://mega.nz/#!mJ0h2RjQ!HRTlGdxOu-FOtDn7dOS9QnTkDvxQAdo9fDp6eiyd_ec
v1.6 - AFH https://www.androidfilehost.com/?fid=673368273298956370
md5 - 9517b7ae70113792bfe8bf5d4d77eaf0
KTU84P Factory Image (for reverting to stock - NOTE running flashall.bat will WIPE internal storage - make backups!!!!)
MEGA https://mega.co.nz/#!eJtRwaTL!RlT3aAFeKnz1mV55NmC5t_caP5RL2UaUA7PyFLk62AU
md5 - 176a1561f322e86216b7edaaa4b2c6bf
CAN flash with no wipe over any of my 1.0/1.1/1.2/1.2.2/1.3/1.5/1.6 builds and stock JWR66Y/KRT16O/KRT16S/KOT49H/KTU84L/KTU84P
Coming soon:
ART? (Sorry still no ART in 4.4.4 for our device! No overhead on /system partition...)
Advanced Power Menu
GEL baked in (again)?
NOTES:
BACKUP using TWRP and Titanium - save those files off the device to a USB stick external HDD or whatnot! Not responsible for lost data!
Be sure you are at bootloader 4.23 or you could have slow charge issue http://forum.xda-developers.com/showthread.php?t=2150251
ONLY TESTED USING TWRP 2.7.1.1/2.8.0.0 - NOTE there was a buggy release of 2.7.1.1 that doesn't play nice with the update-binary in my zip. If any issue flashing/booting first verify MD5 and then flash latest TWRP linked towards the bottom of this page http://techerrata.com/browse/twrp2/grouper. Should also flash fine under CWM but I personally prefer TWRP. A future update may move to the newer update-binary and updater-script files used in ROMs compiled from source like CM.
May need to unplug and replug USB cable to see Nexus 7 storage under My Computer! (or toggle MTP in Settings --> Storage --> Menu button in upper right)
If coming from STOCK 4.4/4.3 I can't think of a need to wipe - otherwise if issue or coming from another ROM (PA, CM, etc.) please do a data wipe and cache/dalvik-cache wipe
GApps are the stock ones that come with this tablet - no need to flash GApps.
You will see a BUNCH of updates when you sign into Google if you've wiped Data - results in an initial slowdown.
Before you ask, no ART doesn't appear to be working. I will make a new AOSP-based ROM for 4.4.4 for those wanting ART.
Thanks:
@dsixda for the Kitchen! (Consider donating to him work is paused on the kitchen he said due to health)
@Chainfire for SuperSU and keeping it updated for KitKat!
@azoller1 for v4.23 bootloader thread and flashable zip
@robgee789 for all the assistance in this thread!
@Metallice for M-Kernel
@RobZarzecki and @robgee789 for cool GravityBox tips!
@cargobr151 for 4 way power menu!
@treIII for being one of the first to flash and requesting stuff like Deodex and GEL
Phandroid for GEL article gave me idea to integrate into ROM http://phandroid.com/2013/11/14/how-to-install-google-experience-launcher-with-ok-google-command/
Google for Android
Changelog/Recommended Apps
Changelog:
v1.0 --> v1.1
v1.1 introduces Google Experience Launcher as second ROM option (Updated PrebuiltGmsCore.apk and added GoogleHome.apk)
Attempt to fix USB Debugging being on by default (hope to help issue with being unable to see Nexus 7 in My Computer as MTP device)
v1.1 --> v1.2
SuperSU up to v1.75 and latest su and daemonsu binaries
Kernel now BONE STOCK secured (root will still work) - USB Debugging now OFF by default. Hopefully MTP is more reliable now
One ROM with both Launchers - on first boot select the blue one for GEL or the other for stock - Settings --> Home to toggle at any time
v1.2 --> v1.2.2
Android 4.4.2 KOT49H!
SuperSU up to v1.80 and latest su and daemonsu binaries
FOTAKill.apk to prevent future OTA notifications
Most Play store GApps updates integrated (ran out of room in /system partition!)
v1.2.2 --> v1.3
Deodex version added
Still Android 4.4.2 KOT49H
SuperSU up to v1.91 and latest su and daemonsu binaries
Youtube, Google Quick Search Box, Google Play Services, Play Store and Maps updates integrated
4 way power menu (thanks @cargobr151)
v1.3 --> v1.5
Updated to KTU84L
SuperSU up to v1.94 and latest su and daemonsu binaries
v1.5 --> v1.6
Updated to KTU84P
SuperSU up to v2.00 and latest su and daemonsu binaries
Busybox v1.22.1
Prior Versions:
DEODEX
v1.5 - MEGA https://mega.co.nz/#!SNkRmKRD!4kG3tkygxiYbdCTcm_bExCA8OY8zQutyU-7ByUktcBw
v1.5 - Dev-Host http://d-h.st/Ec5
v1.3 - MEGA https://mega.co.nz/#!yUV2iTQb!TrwItTSrTwJBtDzjyZzd-S98d-v592dRSNZB7dBrcgU
v1.3 - Dev-Host http://d-h.st/Po2
ODEX
v1.5 - MEGA https://mega.co.nz/#!mQcCDbhD!y07Up7mJ34XsnGRjc-j1ScO7qoJ6-Jl2WdL_2BG7fGY
v1.5 - Dev-Host http://d-h.st/7Oi
v1.3 - MEGA https://mega.co.nz/#!bEUyGa5A!k0nc5RGMM44C3DnAeMrfwFX6gsHPUcYLj5qnoXe5tq0
v1.3 - Dev-Host http://d-h.st/OI3
Kernel/Apps:
M-Kernel a68 - http://forum.xda-developers.com/showthread.php?t=2168787 thanks @Metallice!
Use Trickster MOD Kernel Settings - https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod
Recommended settings are at the bottom of the first post in the M-Kernel thread!
I like to use the tablet to read at night and the screen is far too bright for this so I use Lux Auto Brightness - try the free version before deciding to purchase - https://play.google.com/store/apps/details?id=com.vitocassisi.luxlite
I use Titanium Backup (also purchased PRO Key) to backup my apps and data - once again try free before deciding to purchase - https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
To keep SuperSU toast notifications from causing any lag I go into SuperSU settings and uncheck Show notifications
In Settings --> Location I set mode to Battery saving. There's a lot to tweak here but this is all I've been setting.
In Settings --> Security under DEVICE ADMINISTRATION I uncheck Verify apps and check Unknown sources (mostly for Titanium Backup purposes)
I use AdAway to block ads (it edits your HOSTS file). No longer available on the Play Store (guessing because Google doesn't like the fact it blocks Google Ads...). I install the APK from here - http://forum.xda-developers.com/showthread.php?t=2190753. I just use the defaults works well.
This installed. Nice job. But my question is why does it not come with the experience launcher? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2
can i flash this straight from a 4.3 Rom, or do i need to go to stock first?
This is a nice rom but I can't get my tablet to charge. Any idea why?
Sent from my Nexus 7 using Xparent Blue Tapatalk 2
Does auto-rotate works in this ROM? I tried stock + Go launcher and auto-rotate don't work, but only work when manual set to Horizontal or Vertical from Go launcher setting!
Is this based on the KRT**0 or KRT**M build?
First Impression
First Impression:
Unlike the other stock one, this installs..
Auto rotation works, No GEL not a deal breaker tho
Installed using MultiRom. No problems installing. Loads without errors, signed into Google. No problems. Recommended. Thank you. Nice work
Sent from my Nexus 7 using Tapatalk
treIII said:
This installed. Nice job. But my question is why does it not come with the experience launcher? Thanks
Sent from my HTCONE using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Try the PA GApps package http://www.androidfilehost.com/?a=show&w=files&flid=7988
At time of writing the one to use is pa_gapps-full-4.4-20131118-signed.zip just flash it in recovery! Also be sure to turn on Google Now.
rester555 said:
Is this based on the KRT**0 or KRT**M build?
Click to expand...
Click to collapse
This is straight from the OTA last week which was KRT16O (zip name was 13088e35942c77e4752aa1fdf51d54472509b941.signed-nakasi-KRT16O-from-JWR66Y.13088e35.zip)
I will add some of this info to the OP. Thanks for trying it and feedback!:highfive:
treIII said:
This is a nice rom but I can't get my tablet to charge. Any idea why?
Sent from my Nexus 7 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Just added this to OP - charging issue is always bootloader as far as I know
Be sure you are at bootloader 4.23 or you could have slow charge issue http://forum.xda-developers.com/showthread.php?t=2150251
vothanhtam said:
Does auto-rotate works in this ROM? I tried stock + Go launcher and auto-rotate don't work, but only work when manual set to Horizontal or Vertical from Go launcher setting!
Click to expand...
Click to collapse
Yup! Working great...
iifuzz said:
can i flash this straight from a 4.3 Rom, or do i need to go to stock first?
Click to expand...
Click to collapse
If stock 4.3 (JWR66Y) should not need to wipe data or system :>
Hey guys just Flashed this from a 4.3 stock room and all is good (not sure on the white icons at the top though lol) but Is there a way to get xposed framework working on this
Sent from my Nexus 7 using Tapatalk
robgee789 said:
Hey guys just Flashed this from a 4.3 stock room and all is good (not sure on the white icons at the top though lol) but Is there a way to get xposed framework working on this
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Xposed still doesn't support 4.4 http://forum.xda-developers.com/showthread.php?t=1574401 But I will keep an eye on it! This is the first I've heard of it. Google \is moving away from all of the ICS blue theming everywhere, so you will see lots more white in 4.4...
I've just Flashed faux ultimate kernel and that's running great too very nice job you did here mate
Sent from my Nexus 7 using Tapatalk
Thanks! My ultimate goal was to get a stock 4.4 where rotation works and the keyboard doesn't pop when going home from other apps (the stock rom PA released was awesome though if you ignore those things and came out WELL in advance of OTA)... To do that I had to wait for the OTA and then it took me 5-6 days learning edify and how to use the kitchen
I will try to get the google experience (I believe it is Launcher3.apk?) working if I cut a new release, and look into getting ART available in dev settings.
I just connected my nexus to my laptop to move a few files but it doesn't pop up on my laptop like it used to so I can't move things via the USB cable
Sent from my Nexus 7 using Tapatalk
robgee789 said:
I just connected my nexus to my laptop to move a few files but it doesn't pop up on my laptop like it used to so I can't move things via the USB cable
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Try turning off USB debugging and reconnecting...
[ROM][GTi9305][XXUENE4]27.6.2014[JB4.3] ▌Official Stock Rom ▌➤Rooted➤Customize guide!
Based on stock GTI9305 I9305XXUENE4 JB 4.3:
- Rooted, Deodexed, Zipaligned, Busybox added
- used AGNi or Boeffla Kernel
- isn’t cleaned from bloatware, but very battery friendly and smooth ...you can clean it yourself after following
- always locale CSC apps removed and unbranded
- without any mods, but read carefully following
Customize how you want an wish!
After install rom you can customize yourself with this guide:
Mods: easier way is use Xposed framework with Wanam Xposed. For example it included call recording, 4-way reboot menu, circle battery indicator and many many. Some screenshots also in attachment.
Very simple and short guide you'll find also in 2nd post.
Bloatware: you can do it yourself how you want through Es explorer or TitaniumBackup, what can you?, for example take inspiration from this post for S4, other you can find alone
Another and easier way is to use Rom cleaner according 2nd post (cleaning list attached)
Add-ons: last important thing is for me camera with hardware volume button, you can download and flash compatible Lite Camera mod from here. If you want add some another mod from i9300, you can me send link and I'll check compatibility, or modify for our model
All next it’s on your own risk!!!
Download:
I9305XXUENE4_CWM_Root_DEOdex_Ziplgn_AGNi_3_54_SELPermissive
- used AGNi Kernel v3.5.4 SELinux Permissive (compatible with Old and New Bootloader)
- if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
Older Official Rom:
I9305XXUENC2_CWM_Root_DEOdex_Ziplgn_AGNi_3_54_SELPermissive
- used AGNi Kernel v3.5.4 SELinux Permissive (compatible with Old and New Bootloader)
- if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUENC1_CWM_Root_DEOdex_Ziplgn_AGNi_3_6_SELPer
- used AGNi Kernel v3.6.0 SELinux Permissive (compatible with Old and New Bootloader)
Warning: if you before flash official Rom 4.3 via Odin you have new bootloader. You must on above Roms immediately after flash of Rom (before first boot) flash and then use right stock kernel from HERE!
I9305XXUENA2_CWM_Root_DEOdex_Ziplgn_Boeffla51stable …...if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEML9_CWM_Root_DEOdex_Ziplgn_Boeffla51b13 …...if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEML8_CWM_Root_DEOdex_Ziplgn_Boeffla51b122 .....if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEMKC_CWM_Root_DEOdex_Ziplgn_Boeffla51b7 …..if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEMKC_CWM_Root_DEOdex_Ziplgd_Boeffla51b4 ...attention this is version without 5 Shortcuts on LockScreen!!!
Install:
- first of all backup all your data from internal SD card, 4.3 has different structure tree!!!
- if you go from 4.1.2 or older I recommend format internal card, if you don’t do it, on internal card were by me still data (DCIM etc...) and you can’t normal access them on 4.3, but even without formatting you can later move them from old folder to new one in 4.3 with Aroma file manager , for me easer way without format. Also is possible, that date will move automatically – also me happened
- bee sure, that you have EFS backup!!!
- create NanDroid backup to external card!!!
- download the *.zip file to external card!
- if you have new Bootloader download also Stock kernel
- download to Recovery
- ROM isn’t full wipe, but is recommended if you get from 4.1.2 and older
- wipe cache and Dalvik cache is automatically included in last version
- select ZIP file from external card and install
- don’t use re-root after installation inside recovery - you don’t need it, if you'll do, then you need install again SU apk from market
- reboot and wait and wait ...
- enjoy it
PS: if you get format system() error in CWM use last PhilZ Recovery
Note: if your camera doesn't work primary follow this (thanks @Hbohd and @P$T), if you don't have incriminated file, flash again Rom then immediately right Stock kernel from HERE - wifi doesn't work with old bootloader, then take photo, then flash again Rom without full wipe with kernel which you like. If your camera still doesn't work flash some Rom 4.1.2 (via Recovery or Odin) take picture, grab and backup incriminated files, then flash this Rom and put them to data/cwm. Don't forget backup your SlimISP_XX.bin for future. Problem with camera have average only cca 10 users JB 4.3 of 1000 usr..
Info for dev's:
If you want this Rom, or part, use as base for your Rom, just give me credit to your OP
Credits:
@psndna88 for AGNi kernel
@Hbohd for ported Boeffla kernel and his team btw. @P$T ...you must give him THX! He was first who ported and provide for us kernel for JB 4.3
@Chainfire for CF-Auto-Root!
- to some others here!
- to Samsung
Simple and short guide: Xposed framework installer + Wanam Xpozed:
- download and install Xposed installer, open apk and go to menu “Framework” and choice “Install”, then reboot your phone
- download and install Wanam Xposed from Google Play
- activate module Wanam Xposed in apk Xposed installer (menu “Modules”), reboot
That’s all, open Wanam Xposed and set, set, set ……enjoy it
Features list of Wanam Xposed:
Call Recording
4 Ways Reboot (Reboot, Recovery, Hotboot, Download)
Full Color/Transparency customization for Status bar and Notification drawer elements
Secure Samsung Keyboard
Option to keep "Add Call" button with Call recording menu
Disable Camera shutter sound (+Screen Capture)
Flashlight trough volume button UP
Skip Music with Volume buttons
Save Call Logs View
Enable Keyboard Symbols
Enable Hangouts Calls trough cellular
Enable Camera while calling
Unlimited and Customizable Multi-View support
Bypass Exchange Lock check
Notification Panel Customization
Long Home key behavior
Long Back key to kill App (+ white list)
Disable increasing ringtone
Messaging Tweaks (raise limits and conversion)
Disable Scrolling cache
Enable Full rotations
White/Colored Circle Battery
Transparent Notifications panel
Customize Clock format and size
Customize Battery text helper size
Customize Quick Settings buttons number per row
Collapse Quick Settings after toggle
2 line formatted date on the panel header
Dark themed Multi-Window
Disable Boot sound
Customize Two line date header format
White/Black Email App background (Supported on some devices)
Transparent Quick Settings buttons background
Default hidden SMS logs
Add Call button to Logs and Contacts list
Disable Accounts icons on Contacts list
Custimize Wifi AP Clients number
Disable Launcher page rotation
Add Exit button to browser
SMS Automatic input mode
Disable Call number formatting
Enable unlimited Contacts joining
Enable Gallery Rotation trough button
Set default Browser view to Desktop
Hide Wireless charging popup
Hide Full Battery Notification
Clock position Status bar (Hide, Left, Right, Center)
NFC behaviors (UN/Locked on Screen ON/Off)
Hide Headset icon and notification bar
Disable TW DVFS
Enable TW DVFS Boost Benchmark mode
Hide Smart Stay, Alarm, NFC icons on status bar
Launcher: Enable Scroll wallpaper and Hide Dock labels
Disable Wake Home button
Use separate Address field on Contacts
Add Fast PIN unlock (to be used with caution)
Added SMS sent time details
Enable Screen ON options on Messaging App
Disable low Battery warning
Add custom carrier label on notification label
Set low Camera battery level
Change System Holo Dark/Light background
Acces hidden Lockscreen shortcuts menu
Disable SEAndroid/Knox notifications and container
Disable volume control sound
Disable low battery sound
Auto Disable Knox notifications when Knox Apps are installed
Set SELinux to Permissive mode on boot
And much more to come
Credits:
@rovo89 for his awesome work on Xposed framework
@wanam for his awesome work on Xposed Mods and next famous work
Note: please don't forget to visit their threads and let them minimal THX
Guide Rom cleaner:
- download ROM Cleaner v2.0 from original Rom cleaner post
- download user cleaning list ROMCleaner_user.txt from attachment
- edit ROMCleaner_user.txt only with OfficeSuite directly in mobile or Notepad ++ how you want
….this is "hardcore" cleaning list (I thing more isn’t possible). You can also it edit only with Notepad++. See into list what you want leave in your Rom a add in front of some *.apk this letter # may not be red . I wanted for example leave AccuweatherWidget.apk, then It will bee so #AccuweatherWidget.apk . Or leave another how it’s and you’ll get cleanest and fastest Rom.
- create on external card folder ../ROMCleaner (must bee exactly named), put there ROM_Cleaner_v2.0.zip and list ROMCleaner_user.txt from atachment
- reboot to recovery and flash ROM_Cleaner_v2.0.zip and use it, list will be automatically loaded and Rom cleaned from cca 330 Mb (more than 180 apks and files)
What remains after cleaning is seen in attachment.
You should NOT remove KNOX Apps if you´r on NEW BOOTLOADER! Use ROMCleaner_user - for users with Knox Bootloader.txt from attachment and after download rename it for ROMCleaner_user.txt
Nearer guide how it use you’ll find in original Rom cleaner thread
If you something screw up, nothing happened, flash again Rom without wipe
Good luck.
Credits:
@antloh for modded cleaning list with adding apks for i9305, I added next Apps and renamed
@Patrics83 for Rom cleaner and based list
@fAiLOfax and all in his post for base to list for Rom cleaner
Note: please don't forget to visit their threads or post and let them minimal THX
Nice project. What about battery drain. Have you tested the rom?
Sent from my GT-I9305 using Tapatalk
I use it without problem + Wanam Xposed apk, and for me is this best way for now. Battery seems quite same as JB 4.1.
Downloading now... will flash and report back soon
Works just ask stated... no problems at all awesome work !!
Pleaaase witch recovery tar can flash with odin for flash the rom ? Thanks !
Envoyé de mon GT-I9305 en utilisant Tapatalk
I'm using [CWM Advanced Edition] PhilZ Touch
Is "KNOX-free", right?
(No KNOX status flag on Download mode)
The speed of mediafire is very slow. A mirror for this rom?
It is pure Stock. But after open Superuser apk will anyway frozen. Complete you can remove yourself according guide.
It is Knox free or not ???
fotbal5 said:
It is Knox free or not ???
Click to expand...
Click to collapse
Ehh.. It isn't hard to read a little. Bootloader might be installed only using Odin on PC. Rom in this thread is flashed in recovery. Now answer yourself
The camera work ?
Envoyé de mon GT-I9305 en utilisant Tapatalk
Yes, without problem.
Hmm. The camera doesn't work for me. Coming from full wipe.
Sent from my GT-I9305 using Tapatalk
Strange, by me without problem, sorry but I dont know, how how can I help you for now
Edit: maybe try this
Edit2: user @braigl also confirmed to me per PM (hi cant write to develop section) that "camera working without problem"
Did you wait, after reboot, until is complete system and sd card loaded? it will take some time after first start, we must bee patient .... till now it downloaded over 400 people and nobody written to me problem with camera
Edit3 : i thing this is final solution for you ... link thanks @P$T and @Hbohd
I tried to flash kernel but end up not booting up the phone. I used both mobile odin and cwm but same results. What am i doing wrong here?
Sent from my GT-I9305 using Tapatalk
And what kernel? For repair again flash Rom (isn't full wipe), it should be OK, hope. I'm out of home, I can't try it
Edit: for now I found a little time, and tried flash this newest CWM i9305-Boeffla-5.1-beta5-by-hbohd-20131219.zip and no problem ....my woman screaming leave your phone
kenar2 said:
And what kernel? For repair again flash Rom (isn't full wipe), it should be OK, hope. I'm out of home, I can't try it
Edit: for now I found a little time, and tried flash this newest CWM i9305-Boeffla-5.1-beta5-by-hbohd-20131219.zip and no problem ....my woman screaming leave your phone
Click to expand...
Click to collapse
Sorry I forget to indicate. I mean stock kernal because my camera is not working.
Sent from my GT-I9305 using Tapatalk
Can I install this over 4.1 stock as long as I have root ?
Sent from my GT-I9300 using xda app-developers app
Aroma installer for Cubot Cheetah 2
In-offical Anroid 8.1 Oreo https://forum.xda-developers.com/showpost.php?p=78534219&postcount=12
Click to expand...
Click to collapse
v19 aroma (Android 7) aroma:
http://www.mediafire.com/?1d2thhx6iw46315/ Cubot+Cheetah+2+Nougat+v19+toBsucht+Aroma+2.2.zip
v19 stock https://www.cubot.net/support/firmware/cheetah2/cubot-cheetah2-v19-20180904.html
Patched boot.img (magisk) https://forum.xda-developers.com/attachment.php?attachmentid=4300517
v8 or v14 aroma (Android 6 or 7):
v14 mfi.re/?7xyfwsdnit7ldm6/
https://forum.xda-developers.com/ge...bot-cheetah2-information-reviews-5-5-t3509666
v08 Marshmallow
*if you only install additional apps you can use v19 aroma to get latest version of them
All aroma versions can be started with TWRP or similar. Only install proper system files if needed. Wipe not needed.
It´s made to install usefull apps like xposed or for recover system. It is not to get root or TWRP.
Just flash via twrp and choose needed app. If your system is working skip system files!!!
To install xposed first flash
android 7 sdk 24 // http://dl-xda.xposed.info/framework/sdk24/arm64/xposed-v89-sdk24-arm64.zip or magisk sdk !!
android 6 sdk 23
Some useful apps inside aroma rom:
some xposed modul of my aroma file:
MTP as Default USB Connection
Led-control but better -->
Led blinker works well for me. To use power led as notification light (red/green) but only if blinker app is not activ
More xposed modul i use: AppsOps Re, CameraNotify, BootManager, CleanLockscreen, Marshmallow SD fix and the prevent running modul is powersafer
LightningWall I use as main wall. Af+ to switch between custom online permisson
Af+wall you can find premium versions of both walls #maybe not working 100% if both are in use
Roaming on national network? It can be fixed with https://forum.xda-developers.com/xposed/modules/app-roaming-control-v1-0-t3267154 v19 fixed roaming issue no need modul at the moment.
None xposed related apps: >>>>
2 bootanimation (black or white google) .. links to another working boot file 1080p - landscape from https://forum.xda-developers.com/android/themes/bootanimation-android-marshmallow-t3180984
Es Explorer support root access or Fx explorer & root add-on
VLCforAndroid_v2.xx
MediaConverter_v0.9.3
Puffin free browser, Dolphin browser, Powertoggles, ButtonMapper
Keep in mind some tools are powerful AppsOps, BootManager, amplify and pervent running.
No wipe after install rom apps. Test it you can run aroma rom without install anything.
Features:
- Custom bootanimation,
- Hardware- and soft-button modding to old behave ("any" liked)
- Getting ride of national roaming (***bug since v2 / fix by v19),
- Widgets on lockscreen,
- Volumebar for notifcation,
- Splitscreen
- Screenrecorder
- Offline backup & recover
- Increase security in multiple ways (firewall, best possible permission control)
- Root explorer,
- Less battery use,
- Direct MTP to PC,
- Custom notifcation led color for each app (green or red),
- Better file support, etc.
Additional features:
- Emergency call / sms with broken screen
- "Free" inter/national calls / sms
- silent system (camera / shutaudio / etc)
Benefit of stock android 6 or 7
Anroid 6 (all stock below v14):
+ turbo download mode = wifi&cellular network
+ seems like less power drain
+ preview video in galerie
+ lockable twrp
Anroid 7 (stock v14 - v19):
+ seems like less system crash which cause reboot
+ voice over LTE
+ get ride of flase national roaming
Have fun!
Requests are welcome as well as proposals.
http://www.mediafire.com/folder/5k0832h9u1cce/Cubot_Cheetah_2
A video of my aroma installer rom on API23 (Android 6.0)
https://youtu.be/zqyDmiqTdhc
Additional i like to suggest more apps to install yourself to your phones.
1. I use Whatscall, Dington, TalkU to make "free" phone call. You pay by watch ads. Whatscall is good to get fast free credits. TalkU and Dington are pretty similar. Autor is "our" phone manufactur Cheetah.
Benefit you can make real phone-call via wifi, safe expensive calls, etc.
If you have no playstore running you get less ads = less credits!
I use them since one year no problems. Me tested other "free" call/sms apps but did not find better once. Please no referal request!
2. shake2safety
Now i use it to enable emergency call by quickly press 4 times Power button. It can be enabled by shake also. That is a feature of new IOS as well as Samsung Galaxy. The benefit is you can automatic call even is screen is broken, eye or finger issue, else.
You can test your setup by automatic call friends number to prevent by mistake calling emergency
Only sms is working if not installed via playstore :/
** For location please keep your GPS on. When there is no Wi-Fi, GPS or mobile data then no location goes with the message/picture. Also it gives your last location if GPS is off.
Click to expand...
Click to collapse
So go and install that app!!! Alternative maybe SOS Stay Safe
Still no reply :/
However maybe not worse to have a 3 post contiguous (last -if no reply), to add details or infos.
You can replace shutaudio.mp3 at root floder system/media/
with attched silent once it increase free space in rom a littel. Play time is shorten so shutdown seems to be littel faster too.
Archiv contain a silent camera.ogg to replace them just rename the once you like to replace.
camera sound at system/media/audio/ui/
Here is a big silent system sound pack:
http://www.mediafire.com/?8pu3qv2ul7opn8z/
Not replace bootaudio.mp3 in v19. The mp3 worked on v14 but not with v19!!!
All my tests on replacement of bootaudio.mp3 in v19 end by bootloop. ( Guess same md5 hash is needed to replace! )
So if you can´t boot anymore run aroma installer and select install system media fix that.
1. edit:
Someone replaced gallery with old v02 version to get video preview back?
Not sure since when it is gone i believe since v14. or less?!
2. edit:
After a while i realize turbo download mode is not available in v19.
Turbo mode enables data transfer via wifi & cellular network at same time.
Can you please tell me how long first boot is meant to take please
deanoz99 said:
Can you please tell me how long first boot is meant to take please
Click to expand...
Click to collapse
If you just re-install less data e.g. boot / shot audio it´s fast as normal. If you are going to install all additional apps it maybe take some minutes. In case you do no install from slow external memory.
On Anroid 6 you can not reboot directly, hold power about 10-15 sec. till system (screen) full turn off and device reboots. Better choose power off device in twrp after finish aroma installation. :fingers-crossed:
toBsucht Psp said:
If you just re-install less data e.g. boot / shot audio it´s fast as normal. If you are going to install all additional apps it maybe take some minutes. In case you do no install from slow external memory.
On Anroid 6 you can not reboot directly, hold power about 10-15 sec. till system (screen) full turn off and device reboots. Better choose power off device in twrp after finish aroma installation. :fingers-crossed:
Click to expand...
Click to collapse
I tried to install and its starts to flash but then twrp auto reboots after about 5 minutes.
deanoz99 said:
I tried to install and its starts to flash but then twrp auto reboots after about 5 minutes.
Click to expand...
Click to collapse
This most likely happens if you:
- install exposed modul without flashing exposed sdk first.
- flashing sytemfiles ( increase by wronge firmware - aroma version)
- on android 6*: - if you reboot direct after installation ## or twrp screen off timer is set & reached * That is a bug of all our 6.0 twrp not a bug of rom
You can fix by:
- flash exposed sdk
- restore a twrp backup (guess you didn´t backup)
- flash proper systemfiles (check firmware i provide for most of them an aroma to restore system)
- flashing full stock rom via MTK tool = 100% fix
I found this topic today and will try it when I have time! For now, I've only changed the irritating boot sound!
toBsucht Psp said:
Not replace bootaudio.mp3 in v19. The mp3 worked on v14 but not with v19!!!
All my tests on replacement of bootaudio.mp3 in v19 end by bootloop.
Click to expand...
Click to collapse
I replaced the bootaudio.mp3 with yours shutaudio.mp3 and the system is booting normally (firmware v19)!
Ok idk why i always failed so maybe other user now also try. May i going to retry
Once again, only flash system app if you have no chance to recover.
Example:
I messed with contact app which may cann´t be recovered with aroma so contact crash by doing wrong. However it still works so i do not flash to repair that little bug.
Keep in mind xposed is tricky and maybe kind of risky to set, so make fresh trwp dump befor going to use "first time".
Hope u have fun with some additional apps.