Related
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
How to install?
Sent from my Vodafone 858 using xda premium
polac said:
How to install?
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
VyrruS said:
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Click to expand...
Click to collapse
I know how to make the touch work in our devices, i'll send you the fix via fb VirruS
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
polac said:
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
I have tested it now and it goes into aroma. Try downloading it again, it may be a bad download.
What we need to wipe and mount before flash?
polac said:
What we need to wipe and mount before flash?
Click to expand...
Click to collapse
The installer mounts and wipes everything you need!
Download again and it continous saying installation aborted
polac said:
Download again and it continous saying installation aborted
Click to expand...
Click to collapse
Tell me how you install it
With clockworkrevovery
i applied the fixes but now it bootloops and then boots into recovery
Sent from my U8160 using xda premium
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
today i will upload a vid showing everything i did and what happens
Sent from my U8160 using xda premium
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
pikakai said:
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
VyrruS said:
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
Click to expand...
Click to collapse
no problem and good luck
Sent from my U8160 using xda premium
Any news?
CM9 can't boot with new version too
Sent from my U8160 using xda premium
Which is the best V6 configurations for U8160?
VyrruS said:
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
Click to expand...
Click to collapse
any news?
Sent from my U8160 using xda premium
is development on this rom dead or something?
Sent from my U8160 using xda premium
pikakai said:
is development on this rom dead or something?
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
I haven't got ICS yet, and I haven't got any more ideas what to put inside AROMA..if you give me ideas, I will mare a 1.3 version. Moreover, if anyone could fix ICS, I'd be grateful.
[ROM][GTi9305][XXUENE4]27.6.2014[JB4.3] ▌Official Stock Rom ▌➤Rooted➤Customize guide!
Based on stock GTI9305 I9305XXUENE4 JB 4.3:
- Rooted, Deodexed, Zipaligned, Busybox added
- used AGNi or Boeffla Kernel
- isn’t cleaned from bloatware, but very battery friendly and smooth ...you can clean it yourself after following
- always locale CSC apps removed and unbranded
- without any mods, but read carefully following
Customize how you want an wish!
After install rom you can customize yourself with this guide:
Mods: easier way is use Xposed framework with Wanam Xposed. For example it included call recording, 4-way reboot menu, circle battery indicator and many many. Some screenshots also in attachment.
Very simple and short guide you'll find also in 2nd post.
Bloatware: you can do it yourself how you want through Es explorer or TitaniumBackup, what can you?, for example take inspiration from this post for S4, other you can find alone
Another and easier way is to use Rom cleaner according 2nd post (cleaning list attached)
Add-ons: last important thing is for me camera with hardware volume button, you can download and flash compatible Lite Camera mod from here. If you want add some another mod from i9300, you can me send link and I'll check compatibility, or modify for our model
All next it’s on your own risk!!!
Download:
I9305XXUENE4_CWM_Root_DEOdex_Ziplgn_AGNi_3_54_SELPermissive
- used AGNi Kernel v3.5.4 SELinux Permissive (compatible with Old and New Bootloader)
- if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
Older Official Rom:
I9305XXUENC2_CWM_Root_DEOdex_Ziplgn_AGNi_3_54_SELPermissive
- used AGNi Kernel v3.5.4 SELinux Permissive (compatible with Old and New Bootloader)
- if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUENC1_CWM_Root_DEOdex_Ziplgn_AGNi_3_6_SELPer
- used AGNi Kernel v3.6.0 SELinux Permissive (compatible with Old and New Bootloader)
Warning: if you before flash official Rom 4.3 via Odin you have new bootloader. You must on above Roms immediately after flash of Rom (before first boot) flash and then use right stock kernel from HERE!
I9305XXUENA2_CWM_Root_DEOdex_Ziplgn_Boeffla51stable …...if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEML9_CWM_Root_DEOdex_Ziplgn_Boeffla51b13 …...if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEML8_CWM_Root_DEOdex_Ziplgn_Boeffla51b122 .....if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEMKC_CWM_Root_DEOdex_Ziplgn_Boeffla51b7 …..if you already have 4.3 Stock from here, you can install without full wipe, isn't any problem
I9305XXUEMKC_CWM_Root_DEOdex_Ziplgd_Boeffla51b4 ...attention this is version without 5 Shortcuts on LockScreen!!!
Install:
- first of all backup all your data from internal SD card, 4.3 has different structure tree!!!
- if you go from 4.1.2 or older I recommend format internal card, if you don’t do it, on internal card were by me still data (DCIM etc...) and you can’t normal access them on 4.3, but even without formatting you can later move them from old folder to new one in 4.3 with Aroma file manager , for me easer way without format. Also is possible, that date will move automatically – also me happened
- bee sure, that you have EFS backup!!!
- create NanDroid backup to external card!!!
- download the *.zip file to external card!
- if you have new Bootloader download also Stock kernel
- download to Recovery
- ROM isn’t full wipe, but is recommended if you get from 4.1.2 and older
- wipe cache and Dalvik cache is automatically included in last version
- select ZIP file from external card and install
- don’t use re-root after installation inside recovery - you don’t need it, if you'll do, then you need install again SU apk from market
- reboot and wait and wait ...
- enjoy it
PS: if you get format system() error in CWM use last PhilZ Recovery
Note: if your camera doesn't work primary follow this (thanks @Hbohd and @P$T), if you don't have incriminated file, flash again Rom then immediately right Stock kernel from HERE - wifi doesn't work with old bootloader, then take photo, then flash again Rom without full wipe with kernel which you like. If your camera still doesn't work flash some Rom 4.1.2 (via Recovery or Odin) take picture, grab and backup incriminated files, then flash this Rom and put them to data/cwm. Don't forget backup your SlimISP_XX.bin for future. Problem with camera have average only cca 10 users JB 4.3 of 1000 usr..
Info for dev's:
If you want this Rom, or part, use as base for your Rom, just give me credit to your OP
Credits:
@psndna88 for AGNi kernel
@Hbohd for ported Boeffla kernel and his team btw. @P$T ...you must give him THX! He was first who ported and provide for us kernel for JB 4.3
@Chainfire for CF-Auto-Root!
- to some others here!
- to Samsung
Simple and short guide: Xposed framework installer + Wanam Xpozed:
- download and install Xposed installer, open apk and go to menu “Framework” and choice “Install”, then reboot your phone
- download and install Wanam Xposed from Google Play
- activate module Wanam Xposed in apk Xposed installer (menu “Modules”), reboot
That’s all, open Wanam Xposed and set, set, set ……enjoy it
Features list of Wanam Xposed:
Call Recording
4 Ways Reboot (Reboot, Recovery, Hotboot, Download)
Full Color/Transparency customization for Status bar and Notification drawer elements
Secure Samsung Keyboard
Option to keep "Add Call" button with Call recording menu
Disable Camera shutter sound (+Screen Capture)
Flashlight trough volume button UP
Skip Music with Volume buttons
Save Call Logs View
Enable Keyboard Symbols
Enable Hangouts Calls trough cellular
Enable Camera while calling
Unlimited and Customizable Multi-View support
Bypass Exchange Lock check
Notification Panel Customization
Long Home key behavior
Long Back key to kill App (+ white list)
Disable increasing ringtone
Messaging Tweaks (raise limits and conversion)
Disable Scrolling cache
Enable Full rotations
White/Colored Circle Battery
Transparent Notifications panel
Customize Clock format and size
Customize Battery text helper size
Customize Quick Settings buttons number per row
Collapse Quick Settings after toggle
2 line formatted date on the panel header
Dark themed Multi-Window
Disable Boot sound
Customize Two line date header format
White/Black Email App background (Supported on some devices)
Transparent Quick Settings buttons background
Default hidden SMS logs
Add Call button to Logs and Contacts list
Disable Accounts icons on Contacts list
Custimize Wifi AP Clients number
Disable Launcher page rotation
Add Exit button to browser
SMS Automatic input mode
Disable Call number formatting
Enable unlimited Contacts joining
Enable Gallery Rotation trough button
Set default Browser view to Desktop
Hide Wireless charging popup
Hide Full Battery Notification
Clock position Status bar (Hide, Left, Right, Center)
NFC behaviors (UN/Locked on Screen ON/Off)
Hide Headset icon and notification bar
Disable TW DVFS
Enable TW DVFS Boost Benchmark mode
Hide Smart Stay, Alarm, NFC icons on status bar
Launcher: Enable Scroll wallpaper and Hide Dock labels
Disable Wake Home button
Use separate Address field on Contacts
Add Fast PIN unlock (to be used with caution)
Added SMS sent time details
Enable Screen ON options on Messaging App
Disable low Battery warning
Add custom carrier label on notification label
Set low Camera battery level
Change System Holo Dark/Light background
Acces hidden Lockscreen shortcuts menu
Disable SEAndroid/Knox notifications and container
Disable volume control sound
Disable low battery sound
Auto Disable Knox notifications when Knox Apps are installed
Set SELinux to Permissive mode on boot
And much more to come
Credits:
@rovo89 for his awesome work on Xposed framework
@wanam for his awesome work on Xposed Mods and next famous work
Note: please don't forget to visit their threads and let them minimal THX
Guide Rom cleaner:
- download ROM Cleaner v2.0 from original Rom cleaner post
- download user cleaning list ROMCleaner_user.txt from attachment
- edit ROMCleaner_user.txt only with OfficeSuite directly in mobile or Notepad ++ how you want
….this is "hardcore" cleaning list (I thing more isn’t possible). You can also it edit only with Notepad++. See into list what you want leave in your Rom a add in front of some *.apk this letter # may not be red . I wanted for example leave AccuweatherWidget.apk, then It will bee so #AccuweatherWidget.apk . Or leave another how it’s and you’ll get cleanest and fastest Rom.
- create on external card folder ../ROMCleaner (must bee exactly named), put there ROM_Cleaner_v2.0.zip and list ROMCleaner_user.txt from atachment
- reboot to recovery and flash ROM_Cleaner_v2.0.zip and use it, list will be automatically loaded and Rom cleaned from cca 330 Mb (more than 180 apks and files)
What remains after cleaning is seen in attachment.
You should NOT remove KNOX Apps if you´r on NEW BOOTLOADER! Use ROMCleaner_user - for users with Knox Bootloader.txt from attachment and after download rename it for ROMCleaner_user.txt
Nearer guide how it use you’ll find in original Rom cleaner thread
If you something screw up, nothing happened, flash again Rom without wipe
Good luck.
Credits:
@antloh for modded cleaning list with adding apks for i9305, I added next Apps and renamed
@Patrics83 for Rom cleaner and based list
@fAiLOfax and all in his post for base to list for Rom cleaner
Note: please don't forget to visit their threads or post and let them minimal THX
Nice project. What about battery drain. Have you tested the rom?
Sent from my GT-I9305 using Tapatalk
I use it without problem + Wanam Xposed apk, and for me is this best way for now. Battery seems quite same as JB 4.1.
Downloading now... will flash and report back soon
Works just ask stated... no problems at all awesome work !!
Pleaaase witch recovery tar can flash with odin for flash the rom ? Thanks !
Envoyé de mon GT-I9305 en utilisant Tapatalk
I'm using [CWM Advanced Edition] PhilZ Touch
Is "KNOX-free", right?
(No KNOX status flag on Download mode)
The speed of mediafire is very slow. A mirror for this rom?
It is pure Stock. But after open Superuser apk will anyway frozen. Complete you can remove yourself according guide.
It is Knox free or not ???
fotbal5 said:
It is Knox free or not ???
Click to expand...
Click to collapse
Ehh.. It isn't hard to read a little. Bootloader might be installed only using Odin on PC. Rom in this thread is flashed in recovery. Now answer yourself
The camera work ?
Envoyé de mon GT-I9305 en utilisant Tapatalk
Yes, without problem.
Hmm. The camera doesn't work for me. Coming from full wipe.
Sent from my GT-I9305 using Tapatalk
Strange, by me without problem, sorry but I dont know, how how can I help you for now
Edit: maybe try this
Edit2: user @braigl also confirmed to me per PM (hi cant write to develop section) that "camera working without problem"
Did you wait, after reboot, until is complete system and sd card loaded? it will take some time after first start, we must bee patient .... till now it downloaded over 400 people and nobody written to me problem with camera
Edit3 : i thing this is final solution for you ... link thanks @P$T and @Hbohd
I tried to flash kernel but end up not booting up the phone. I used both mobile odin and cwm but same results. What am i doing wrong here?
Sent from my GT-I9305 using Tapatalk
And what kernel? For repair again flash Rom (isn't full wipe), it should be OK, hope. I'm out of home, I can't try it
Edit: for now I found a little time, and tried flash this newest CWM i9305-Boeffla-5.1-beta5-by-hbohd-20131219.zip and no problem ....my woman screaming leave your phone
kenar2 said:
And what kernel? For repair again flash Rom (isn't full wipe), it should be OK, hope. I'm out of home, I can't try it
Edit: for now I found a little time, and tried flash this newest CWM i9305-Boeffla-5.1-beta5-by-hbohd-20131219.zip and no problem ....my woman screaming leave your phone
Click to expand...
Click to collapse
Sorry I forget to indicate. I mean stock kernal because my camera is not working.
Sent from my GT-I9305 using Tapatalk
Can I install this over 4.1 stock as long as I have root ?
Sent from my GT-I9300 using xda app-developers app
I've been learning how to build a custom rom for the S5...
Finally got my first stable version that I'd love to share!
Special Features:
Stock Base
Rooted - SuperSU
BusyBox integrated.
zip-aligned
Build.prop tweaks for speed, battery, usb debug
Removed all Verizon/Samsung apps that I could possibly strip out - without having any problems in settings, etc.
(Except S Voice - I just skipped including that because it's useless to me.)
WiFi Hotspot - WITH NOTIFICATION TOGGLE
**** Almost all apps have been moved to /data/app - which means you can uninstall them, not just turn them off.
Replacements:
Replaced stock launcher with Holo Launcher HD
Chrome replaced with Firefox
Messages replaced with Handcent
Includes:
AdFree (Root)
Titanium Backup
I DO NOT WARRANTY THIS ROM IN ANY WAY.
INSTALL AT YOUR OWN RISK. DONT HATE ME IF IT DESTROYS YOUR DEVICE.
I've been running it on my device for the day and it's doing great!
Install instructions:
Use safestrap
Any ROM slot should be fine. I know it's not possible currently in safestrap to make a smaller system partition, but really only 2GB is needed for system.
I'd highly recommend a clean slot -- for some reason while testing safestrap wouldn't fully wipe the data partition.
PLEASE NOTE:
After initial boot, you will be sent through the Setup Wizard, as usual.
Immediately following completion of first boot, your phone will "go crazy" for a few seconds. The select wallpaper window will open (dont do anything), then the screen will go blank for a second.
* Setup Wizard may force close. DONT PANIC!! Everything i still working right. Just click OK.
I have set up a One-Time Init script to install the WiFi Hotspot toggle into notification panel, change the default lockscreen/homescreen backgrounds, enable USB Debugging, and to set up the initial Holo Launcher icon layout.
DOWNLOAD LINK:
MediaFire Old Version
Still being uploaded:
Odex Version Does not include Setup Wizard. If you can't live without it, get the old version.
MD5 = aefa00cdad2e3c50ab63332ba7ff106e
DeOdex Version
MD5 = 029093db318bf1d331a38d97573faa41
Screenshots below!
If you like my ROM please DONATE a couple dollars!
jake5253 said:
I've been learning how to build a custom rom for the S5...
Finally got my first stable version that I'd love to share!
Special Features:
Stock Base
Rooted - SuperSU
BusyBox integrated.
zip-aligned
Build.prop tweaks for speed, battery, usb debug
Removed all Verizon/Samsung apps that I could possibly strip out - without having any problems in settings, etc.
(Except S Voice - I just skipped including that because it's useless to me.)
WiFi Hotspot - WITH NOTIFICATION TOGGLE
**** Almost all apps have been moved to /data/app - which means you can uninstall them, not just turn them off.
Replacements:
Replaced stock launcher with Holo Launcher HD
Chrome replaced with Firefox
Messages replaced with Handcent
Includes:
AdFree (Root)
Titanium Backup
I DO NOT WARRANTY THIS ROM IN ANY WAY.
INSTALL AT YOUR OWN RISK. DONT HATE ME IF IT DESTROYS YOUR DEVICE.
I've been running it on my device for the day and it's doing great!
Install instructions:
Use safestrap
Any ROM slot should be fine. I know it's not possible currently in safestrap to make a smaller system partition, but really only 2GB is needed for system.
I'd highly recommend a clean slot -- for some reason while testing safestrap wouldn't fully wipe the data partition.
PLEASE NOTE:
After initial boot, you will be sent through the Setup Wizard, as usual.
Immediately following completion of first boot, your phone will "go crazy" for a few seconds. The select wallpaper window will open (dont do anything), then the screen will go blank for a second.
* Setup Wizard may force close. DONT PANIC!! Everything i still working right. Just click OK.
I have set up a One-Time Init script to install the WiFi Hotspot toggle into notification panel, change the default lockscreen/homescreen backgrounds, enable USB Debugging, and to set up the initial Holo Launcher icon layout.
DOWNLOAD LINK:
MediaFire
Screenshots below!
If you like my ROM please DONATE a couple dollars!
Click to expand...
Click to collapse
Nice to see another ROM pop up!
Sent from my SM-G900V using XDA Premium HD app
Nice! Can't wait to give it a go!
Sent from my SM-G900V using XDA Premium 4 mobile app
is there a way to use stock launcher???? i perfer stock tw launcher
jdog94 said:
is there a way to use stock launcher???? i perfer stock tw launcher
Click to expand...
Click to collapse
I know there is a link somewhere here on xda where you can download a zip with all the original apks. Check in the Verizon S5 general section.
Found it! Look in OP Here
Note on my ROM, I seem to have forgotten to remove the security policy updates app. feel free to remove it yourself.
/system/priv-app/SPDClient.odex and SPDClient.apk
-- Disclaimer --
Files provided in this post are made for my personal use. I'm just sharing.
Therefore:
If you make use of them in any way, you do this on your own risk.
I can not be held responsable in any kind of way, wether for bricked phones, sd cards or any other kind of damage.
By downloading the file/s you agree to the conditions mentioned above.
-- Recommendations --
I personally recommend you to make a full TWRP backup before flashing this ROM.
The TWRP file and flashing instructions can be found here.
TWRP is not necessarily needed to flash this ROM, but recommended.
-- About the ROM --
The ROM is based on the latest official stock build vernee_M5_171106_59960-ota-1509963705 provided by vernee
Features / changes in comparison to the stock build (excerpts):
- deodexed
- rooted with Magisk
- BusyBox
- signature spoofing enabled
- signature verification disabled
- Google Play Services replaced by microG with original Google Play Store, Google Calendar, Gboard, GoogleSyncAdapters, ...
- Xposed Framework
- substratum support
- debloated (TouchPal, most GApps, .. )
- apps added (excerpts)
- Ruthless (Pixel 2) Launcher
- MiXplorer
- Material Xposed Installer
- ViPER4AndroidFX Materialized
- Google Markup PORT
- Mie Alcatel Camera
- original AOSP apps
- . . .
- UI and framework tweaks and mods
- fully classic material themed
- faster default animation speed (1 -> 0.5)
- changed DPI (320 -> 282), which results in displaying everything a little smaller
- material shapeless launcher icons (Lollipop/CM12-14.1 style)
- android P style nav- and status bar
- . . .
- and many more ..
-- How to install --
Method I
Flash via TWRP recovery
- Copy the zip file somewhere to your device (internal/external storage)
- Boot into TWRP
- *optionally, but definitely recommended* Factory reset **A dirty flash may work, since this ROM is stock based, but there is no guarantee for that
- Flash the zip
- Reboot
Method II
Flash via SPFlashtool
(NOT RECOMMENDED, BECAUSE YOU WILL MISS SOME MAGISK FEATURES, WHICH YOU HAVE TO RE-INSTALL MANUALLY)
- Extract the zip file
- Open SPFlashtool
- Load the scatter file from the extracted zip folder
- Turn off your phone
- Connect ONLY your usb cable to your pc
- Click "Download"
- Connect your device to the cable
- Let the process finish
- Disconnect your device
- Turn on your device
-- Download --
[MEGA] vernee-m5-3lm-xda-180609-1-beta-FIXED ~ 1.26 GB
[MEGA] vernee-m5-3lm-xda-180512-1-alpha ~ 1.96 GB
CREDITS & THANKS TO ALL THE GREAT DEVS -MAINLY HERE ON XDA- FOR SHARING THEIR WORK AND KNOWLEDGE! :fingers-crossed::good::highfive:
without you, this rom would not have been possible!
3lm
good insertion
Thanks bro!
TOP rom! Thansk! But settings Gboard Always shut down. And Google Play RH-01 error..
How result this problems? Thansk!
Lot of bugs.. Gboard has been stoped.. Many apk shut down..
fantom004 said:
TOP rom! Thansk! But settings Gboard Always shut down. And Google Play RH-01 error..
How result this problems? Thansk!
Click to expand...
Click to collapse
try this:
1. clear data of all google and microg related apps (incl. the three backends)
2. in microg settings enable google device registration and setup the nlp backends
3. start playstore and log in to your google account (now the RH-01 error shows up, right?)
4. reboot
play store and all other google account related things should work now..
fantom004 said:
Lot of bugs.. Gboard has been stoped.. Many apk shut down..
Click to expand...
Click to collapse
which apps force close? gboard for example works perfectly fine for me..
drei.liter.milch said:
try this:
1. clear data of all google and microg related apps (incl. the three backends)
2. in microg settings enable google device registration and setup the nlp backends
3. start playstore and log in to your google account (now the RH-01 error shows up, right?)
4. reboot
play store and all other google account related things should work now..
which apps force close? gboard for example works perfectly fine for me..
Click to expand...
Click to collapse
Ikariam Mobile sometimes shut down, Facebook.
I try reinstall
I tried reinstalling. Unfortunately it did not help.
Bugs:
The Gboard setting causes the application to close.
SMS and MMS settings will cause the application to close.
Even though I'm connected to WiFi, mobile data will be reloaded.
SMS And MMS background black? WTF..
Gallery, when i want edit aby photo, apk will to close..
Emoticons in Gboard
fantom004 said:
I tried reinstalling. Unfortunately it did not help.
Bugs:
The Gboard setting causes the application to close.
Click to expand...
Click to collapse
can not confirm that
SMS and MMS settings will cause the application to close.
Click to expand...
Click to collapse
can not confirm that
Even though I'm connected to WiFi, mobile data will be reloaded.
Click to expand...
Click to collapse
can not confirm that
SMS And MMS background black? WTF..
Click to expand...
Click to collapse
this is due to some wrongly themed elements in the substratum overlays for these apps. will fix it in the next update
Gallery, when i want edit aby photo, apk will to close..
Click to expand...
Click to collapse
confirmed. I guess this happens because there is no app which can handle the picture editing request
Emoticons in Gboard
Click to expand...
Click to collapse
can not confirm that. working fine on my device
Are you installing over TWRP?
fantom004 said:
Are you installing over TWRP?
Click to expand...
Click to collapse
yes, usually i use twrp. but i also flashed with flashtool..
i also installed it coming from the 250917-version.
but i could not reproduce the bugs on my phone. really weird..
perhaps something country related or microg related..
can you upload your logcat? are you familiar with that?
drei.liter.milch said:
yes, usually i use twrp. but i also flashed with flashtool..
i also installed it coming from the 250917-version.
but i could not reproduce the bugs on my phone. really weird..
perhaps something country related or microg related..
can you upload your logcat? are you familiar with that?
Click to expand...
Click to collapse
Somehow, mysteriously, I tried to reinstall the entire TWRP and it works !!! But Ikariam always stopped.
But I still solve the low volume of calls. Even though I have a full volume. How do you solve this problem?
I am glad that it works for you now
fantom004 said:
But I still solve the low volume of calls. Even though I have a full volume. How do you solve this problem?
Click to expand...
Click to collapse
I dont really have this Problem.. Sound is not the best, but way good enough to understand the caller..
I just noticed a little HD icon while I am in a call on the left side of the screen. Do you see it, too?
drei.liter.milch said:
I am glad that it works for you now
I dont really have this Problem.. Sound is not the best, but way good enough to understand the caller..
I just noticed a little HD icon while I am in a call on the left side of the screen. Do you see it, too?
Click to expand...
Click to collapse
Yes I seed it..
fantom004 said:
Yes I seed it..
Click to expand...
Click to collapse
hmm ok, then i don't know..
but there is a magisk module which fixes (or tries to fix) the low incall volume.
in the download section of magisk manager search for "Android Mic Fix".
it is actually targeting qualcomm hardware, but it might work for mtk too, so give it a try..
regarding your ikariam problem: enable google cloud messaging (gcm) in microg settings, then clear data of ikariam and restart the app.. should work now..
drei.liter.milch said:
hmm ok, then i don't know..
but there is a magisk module which fixes (or tries to fix) the low incall volume.
in the download section of magisk manager search for "Android Mic Fix".
it is actually targeting qualcomm hardware, but it might work for mtk too, so give it a try..
regarding your ikariam problem: enable google cloud messaging (gcm) in microg settings, then clear data of ikariam and restart the app.. should work now..
Click to expand...
Click to collapse
Error..
fantom004 said:
Error..
Click to expand...
Click to collapse
:laugh:
You have to install magisk again from magisk manager to use modules
Magisk consists of two parts:
1. Patched boot image
2. Some files in data Partition
Unfortunately I am not able to create a proper userdata image at the moment (I'm working on it)
Therefore the magisk files in data Partition are missing, when you flash the ROM.
Follow these steps:
1. Open magisk manager
2. Go to magisk settings
3. Choose update channel "beta"
4. Go back to magisk main screen
5. Click "install" -> "install" -> "direct install (recommended)"
6. Let installation finish
7. Reboot
Now you are able to use magisk modules.
You have to repeat these steps after every data wipe or factory reset to use modules.
BTW: have you activated Besloudness in sound settings?
And have you tried ikariam again? Is it working now?
Cheers
How is battery life? I get horrible battery life on my stock rom
whise1 said:
How is battery life? I get horrible battery life on my stock rom
Click to expand...
Click to collapse
It is way better than on stock rom. There are a few build.prop tweaks which aim at battery life.
But the main factor is the microg replacement. I would guess, it saves at least 1/3 of battery life..
just give it a try!
btw: today I will post an update with some small, but important changes. so look out!
What does this do?
This flashable ZIP file attempts to speed up Android OS by implementing tweaks and removing programs that the average Android user may not utilize. It also adds build.prop tweaks, init.d tweaks and a hosts file all aimed at one goal, to reach Android's maximum performance.
Before doing anything, be sure to backup with recovery since things might go wrong.
How to install/update:
First things first, YOU HAVE TO DOWNLOAD A 3RD PARTY LAUNCHER AS THIS MOD REMOVES THE DEFAULT LAUNCHER. I recommend Nova Launcher
1. Download ZIP and transfer it onto your phone's downloads folder (much easier if you download it through phone)
2. Boot into recovery mode and make a BACKUP first before flashing!
3. Flash the downloaded ZIP file.
4. After the process, wipe dalvik-cache and cache partitions (you do not need to format data)
5. Done! Now boot into the system and wait for the boot process to take you to lock screen (should take longer than usual, maybe about 1-10min. Don't be scared if your phone is taking longer than usual)
6. Open Settings > Apps > ::: (3 dots on the top right corner) > Reset app preferences (If you do not have this step, you can skip)
7. Done! After flashing, I recommend calibrating battery (you do not need to do this every update!)
NOTE: For a while, it may seem that Android's performance is worse and the battery is slower. Give it some time to adapt to the new changes
For updates, just download the updated ZIP and follow the installation steps again! Easy peasy.
Common Issues:
Boot Loops
Black Screen on Startup
Phone won't boot
Settings do not respond when opened
Certain apps lost functionality
Spam messages saying: "Unfortunately android.app has stopped working"
Notifications not working
Any issue that comes up, restore it from backup. Usually, uninstalled system apps are what cause these issues. To prevent them, you will need to remove some lines in the updater-script in my ZIP and reflash it. Be sure to report any bugs you find so they can be fixed right away!
Compatibility:
This ZIP file should be compatible with all ROMs (stock-based, AOSP-based and even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge (G935W8) running stock-based ROM (Superman ROM v3.0.1).
Tested on:
- LineageOS 16.0 ROM Android P
- Superman ROM v3.0.1
- The Galaxy Project
Changelog:
1.5.2
- Added more programs to debloat list
- More ads blocked in the hosts file
- Added more build.prop tweaks
1.5.1
- Tested and working
- Programs in updater-script are now sorted in alphabetical order for easier finding
1.5beta3 *UNTESTED*
- Added a LOT more BuildProp tweaks (115+ lines!)
- Added mxt224_ts_input.idc (makes touch screen better and responsive)
- System apps are now included in Doze
- Added sysctl.conf (extra protection)
- Added a LOT more init.d tweaks
- Added local.prop (values for performance)
- For older versions, visit - https://forum.xda-developers.com/s7-edge/themes/roms-android-acceleration-strip-t3841643
1.5beta2 *UNTESTED*
- Fixed the HOSTS file
. - Remove invalid rows
. - Added 13,000 new lines (now containing over 61,000 lines!)
. - Removed useless lines
. - Sorted alphabetically
. - Removed empty lines
1.5beta *UNTESTED*
- Added a LOT more Init.d tweaks (increases performance by managing cpu and ram better and many more)
- Added a LOT more BuildProp tweaks (increase performance)
- Added a hosts file (contains over 48,000 lines!) that blocks malware and ads, thus increasing speed
1.4.1
- Tested and fixed some issues. Includes all changes below.
- Ignore the error, "failed to mount /cache". It will function regardless
1.4beta3 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Included v1.3.3 changes
1.4beta2 *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added buildprop tweaks
- Does not include v1.3.3 changes
1.4beta *UNTESTED*
- This version has not yet been tested so it might not work and will probably give an error 7 in TWRP (if it does not give an error, please let me know)
- Added init.d tweaks
- Does not include v1.3.3 changes
1.3.3
- Added ADAPT SOUND and PRINTERS to debloat list
1.3.2
- Added a build prop tweak to utilize hyperthreading
1.3.1
- Added more apps to debloat list. Expect more apps to be added in the future
1.3
- Added more to debloat list
- Added buildprop tweaks
- This should fix error 7 in TWRP
- COMING SOON: Init.d tweaks
1.2.1
- I'll add build.prop and init.d tweaks when I can
- More apps to added to debloat. BACKUP
- After flashing be sure to wipe cache and dalvik
1.2 - DO NOT DOWNLOAD. ERROR IN UPDATER-SCRIPT. FIXING IN v1.3
- Added init.d tweaks
- Added BuildProp tweaks
- Added more to debloat list
1.1
-Added more to debloat list, be sure to backup just in case anything goes wrong!
1.0
- Init
Permissions:
- Feel free to take anything from the zip file, however, you must credit me as creator.
- If you are reuploading this on another website, add a link to this xda thread.
123keelos said:
1. Download ZIP (much easier if you download it through phone)
Click to expand...
Click to collapse
It is better if a mirror link also available...
Thanks
HemanthJabalpuri said:
It is better if a mirror link also available...
Thanks
Click to expand...
Click to collapse
I'll try to get a mirror up. Also, how does a mirror link being available make it better?
123keelos said:
I'll try to get a mirror up. Also, how does a mirror link being available make it better?
Click to expand...
Click to collapse
Since I cant able to download the attachment.. it shows error..
Thanks
HemanthJabalpuri said:
Since I cant able to download the attachment.. it shows error..
Thanks
Click to expand...
Click to collapse
I see. Check the description, I uploaded a mirror link
Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.
narco14 said:
Hi it's really efficient for battery and performance or not? I've a custom kernel and custom stock rom. I use ex Kernel manager for tweaking my kernel with naptime and servicely too, thx in advance. In deepsleep my phone loose only 4% in 8 hours.
Click to expand...
Click to collapse
- Battery Life: Will be a bit better since it removes aps that would run in the background. It also adds performance settings that would drain the battery a little bit, but overall, it would be better
- Performance: It will improve since not as many apps are running in the background as opposed to stock
I, too, use a custom ROM and kernel.
Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?
Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!
dhampire said:
Can I flash by Magisk Manager? or TWRP only?
My device arch is x86. can I use?
Click to expand...
Click to collapse
I dont know about flashing with Magisk so I think it's best that TWRP is used.
No devices (are known) are incompatible with this zip file so you can flash it on any Android
evilarthas said:
Hi! I have a problem, I can't access system or any data from TWRP, so I can't flash your zip even through sideload.
Can you make a Magisk version? It would be great!
Click to expand...
Click to collapse
I dont have any experience with making a Magisk version.
Go to TWRP, click on Mount and check System then press BACK (dont click mount system). This probably would fix your issue.
Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0
evilarthas said:
Hi, first of all thank you for your effort.
I can't get your mod working on my phone. I removed some essential lines from update script, then I even formatted data in order to have access to my system and data and then flashed. It says that it can't get access to /cache. However, as I can observe, the patch is applied. I boot up my phone and have another welcome application, I proceed and then it is stuck on "Android is starting". Very disappointed, wanted this mod to work and to get the bloat out of my phone.
My phone is sm-935s. TWRP is installed, as well as Magisk.
Stock oreo 8.0.0
Click to expand...
Click to collapse
For me, it says that cache cant be accessed after I flash it. It still works for me even though. This error can be ignored
As for the Android starting stuck, it means that the updater-script is removing some applications that are necessary for a functioning phone. You will have to do some experimenting and remove lines until you find the issue.
Hi, 1.5.1 working without issues and without deleted some lines in updater script ?
It works on S7 Edge ?
dawidk750i said:
It works on S7 Edge ?
Click to expand...
Click to collapse
man, did you read OP???
Compatibility:
This ZIP file should be compatible with all ROMs (even stock), mods, devices and Android versions, but it was specifically tested and built around an S7 Edge running stock-based ROM (Superman ROM v3.0.1).
Click to expand...
Click to collapse
I tried v1.5.1 on my Moto X4 (Android 9) and have error 7 in TWRP..
My phone just become worse
In the first message, there are so many errors written that unfortunately the human is hesitant to install.
For this reason, many people may think again when they want to install it.
Error in flashing on GT-N7000
Failed to mount '/cache (No such file or directory)'