If so, would you mind sharing the procedure? I've tried flashing the 4.4.4 firmware in 3 different computers, with Odin 3.4, 3.7 and 3.9, using several cables and several USB ports, but it always results in a <ID:0/003> FAIL! (Auth) or stuck on aboot. I've done factory reset, wiped cache, turned on debugging. Lollipop sucks the battery harder than a truck stop hooker, and would love to go back to KitKat. Thanks for any help thrown my way.
Not everybody at once, people! That's what I get for buying a phone only 3 other people own. It's OK, I still love you, Edge.
I was able to downgrade as were a few others with Edges. A little searching and you'll find all the answers you're looking for.
Geners said:
I was able to downgrade as were a few others with Edges. A little searching and you'll find all the answers you're looking for.
Click to expand...
Click to collapse
Is your Edge from Verizon? I found information for other carriers (which I assumed would be the same procedure, obviously with the right firmware), but since my downgrade failed miserably, I want to know if anyone else with a Verizon Note Edge has been able to downgrade.
Mexico said:
Not everybody at once, people! That's what I get for buying a phone only 3 other people own. It's OK, I still love you, Edge.
Click to expand...
Click to collapse
Mexico said:
Is your Edge from Verizon? I found information for other carriers (which I assumed would be the same procedure, obviously with the right firmware), but since my downgrade failed miserably, I want to know if anyone else with a Verizon Note Edge has been able to downgrade.
Click to expand...
Click to collapse
Check your PM's
Please share this info
Please share on how to roll back to kit kat on the Verizon note edge. I upgraded to lollypop and do not like the battery life and a few other things that have come about because of this upgrade. I have tried using Odin to revert back to 4.4.4 but keep getting a failed message. I would be forever great full if you could please send me or post this information.
Thanks in advance for the help!
If I am ever able, I will. Still stuck with 5.0.1.
Hi gang. FYI... In trying to help MEXICO downgrade his Edge, I sent him a PM with information I thought could be useful for downgrading his Verizon version. Apparently this was something he had already seen and was of no help to him. I have been searching for the tar files for Verizon edge kitkat to no avail. I will continue to research, but at this point I cannot offer any help as I am on AT&T. If I come across something that may be useful, I'll let you know. I encourage you all to also keep searching and share any information you might find. I'm sorry that I'm pretty much useless at this point.
Bootloader TAR File
I have managed to find a sample of the TAR file for the 915F version of the Galaxy Note Edge. I have also been able to find this thread that details what info needs to be made into the TAR file from the downloaded 4.4.4 Verizon Firmware file but I have been unable to create the TAR bootloader file correctly. I keep getting individual files in a TAR and not an MD5 in a TAR. It is a start and hopefully someone with greater knowledge of creating said TAR file can take this info and run with it.
Sample TAR file Thread:
http://forum.xda-developers.com/not...15f-kitkat4-4-4bootloader-tar-unlock-t3063928
What needs to be in the TAR file:
http://forum.xda-developers.com/note-edge/help/help-downgrading-to-kitkat-lollipop-t3149380
Here is the place to download the stock firmware:
http://hamrofirmware.blogspot.com/
Hope this is the beginning of something that can work. Please let me know if I can be of further help.
Related
P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.
27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!
There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems
Haha, how true! No news is good news right?
problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.
This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.
Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk
Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:
P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.
I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.
if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?
resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.
tried to down grade from 5.0 to 4.4 in order to gain root. boot screen come for a few minutes then it goes to boot loader. factory reset did nothing. I cant find firmware OG1 anywhere. tried to flash OE8 with odin but no help. if I could find the OG1 firmware I think I could get back to normal..... I hope
@Misterxtc
i was looking around to help this user out, and saw your thread here, but it doesnt contain the file he asks for.
maybe you have the file? or could lend some guidance.
thanks
bweN diorD said:
@Misterxtc
i was looking around to help this user out, and saw your thread here, but it doesnt contain the file he asks for.
maybe you have the file? or could lend some guidance.
thanks
Click to expand...
Click to collapse
Sorry but I don't have any other files other than what is posted. I stopped all dev work a few months ago and no longer have the tools on my computer to extract and repack the files.
I have a SM-G530T. What I need is the PIT file for this model of Galaxy Grand Prime.
Its in a bootloop at the logo screen. When trying to fix in odin using the stock rom 5.1.1
I get the error message "Fail" in Odin at the system.img.ext4 stage.
Ive been looking for days for the download file. Google lists sites that have it but cant find it on their sites.
Could someone help or maybe suggest another way to fix my phone.
I truly appreciate your time.
joe
dikhuntn said:
I have a SM-G530T. What I need is the PIT file for this model of Galaxy Grand Prime.
Its in a bootloop at the logo screen. When trying to fix in odin using the stock rom 5.1.1
I get the error message "Fail" in Odin at the system.img.ext4 stage.
Ive been looking for days for the download file. Google lists sites that have it but cant find it on their sites.
Could someone help or maybe suggest another way to fix my phone.
I truly appreciate your time.
joe
Click to expand...
Click to collapse
although this is not your model, these guys seem helpful in finding some pits.
also, this guy seems to know how to pull it. if you could find someone currently posting with your model, maybe you could sweet talk them into pulling it for you
thank you
bweN diorD said:
although this is not your model, these guys seem helpful in finding some pits.
also, this guy seems to know how to pull it. if you could find someone currently posting with your model, maybe you could sweet talk them into pulling it for you
Click to expand...
Click to collapse
thank you so much for replying. ive tried sammobile....but no pits for my model. i read the message from that guy about his phone the other day..ill try him.
thanks again.
Hi, after a weekend of messing with my phone I managed to delete all my files
Plus all my backup files I have no recovery backup that's gone too, all root access has
Been Lost odin won't work supersu is asking for Binery files and won't work, I do have the latest Twerp Installed however I've got nothing to install with it and no recovery backup to install, odin won't open it says unexpected partition layout. I have a Samsung galaxy s3 GT-I9300, OH I can no longer connect to my Internet at home. Here's some more info don't know if it will help anyone who can help me.
WI-FIMAC ADDRESS 88:32:9B:63:5F:A8
SERIAL NUMBER 4df7298605262179
BASEBAND VERSION 19300XXUGMK6
KERNAL VERSION 3.0.31-2168382
BUILD NUMBER JSSISJ. 19300XXUGMK6
Any help, any ideas will be greatly appreciated
Thanks. Matt...... Newbe
delete dup post
mwelf74 said:
Hi, after a weekend of messing with my phone I managed to delete all my files
Plus all my backup files I have no recovery backup that's gone too, all root access has
Been Lost odin won't work supersu is asking for Binery files and won't work, I do have the latest Twerp Installed however I've got nothing to install with it and no recovery backup to install, odin won't open it says unexpected partition layout. I have a Samsung galaxy s3 GT-I9300, OH I can no longer connect to my Internet at home. Here's some more info don't know if it will help anyone who can help me.
WI-FIMAC ADDRESS 88:32:9B:63:5F:A8
SERIAL NUMBER 4df7298605262179
BASEBAND VERSION 19300XXUGMK6
KERNAL VERSION 3.0.31-2168382
BUILD NUMBER JSSISJ. 19300XXUGMK6
Any help, any ideas will be greatly appreciated
Thanks. Matt...... Newbe
Click to expand...
Click to collapse
try using a pit file with odin. im thinking it wouldnt have an error if you had the pit file.
to answer your question "what have i done?" it would seem, you changed things you didnt understand and didnt realize the consequences, resulting in a big @SS mess
dont do that
Like I said odin won't work because of unexpected partition layout.
I'm fully aware of the consequences however I will be the recipient
Of a Samsung galaxy note 4 next week so I was just experimenting
And I will definitely not be rooting that
mwelf74 said:
Like I said odin won't work because of unexpected partition layout.
I'm fully aware of the consequences however I will be the recipient
Of a Samsung galaxy note 4 next week so I was just experimenting
And I will definitely not be rooting that
Click to expand...
Click to collapse
ill just assume you dont know what a pit file is, and ill move on. good luck!
No need to assume, I'll be honest I've no idea what a pit file is or how to use one
Etc etc, however I'd be interested to learn if you can give me the basics, everybody has to start somewhere and the only way to progress is if people share the knowledge,
So what do you know that can help me??
mwelf74 said:
No need to assume, I'll be honest I've no idea what a pit file is or how to use one
Etc etc, however I'd be interested to learn if you can give me the basics, everybody has to start somewhere and the only way to progress is if people share the knowledge,
So what do you know that can help me??
Click to expand...
Click to collapse
go to your devices forum where the return to stock post is, and see if there is a pit file for whatever version you have. if not, try a search for pit over your general and q&a forums. im sure you will find some, just need to match them to the stock files.
on odin, there is a pit box, check it and link your pit file.
I'd just like to let you know I have managed to sort my phone out
I got a clockwork mod ,and now I'm using something called CyanogenMod
I'm not quite sure how I have managed to achieve this but I have my WiFi connected
to my phone again, Odin is installed and working with no unexpected partition layout
Problems, however my SD card won't mount and I can't seem to get Google playstore
But for now its a small price to pay considering where I was this afternoon. I think I've done well
I'm sorry, this is going to sound really stupid,
But when it comes to the Galaxy s7 edge phones,
Could someone please tell me what it is people talk about
when they mention odin'ing a factory PD8 file,
I've scoured google for an answer and can not seem to find anywhere with a simple definition,
What are these files,
are they touchwiz versions?
Please help.
I am also looking for this. I rooted the Samsung Galaxy S7 and noticed lag spikes. I read an article that says this is because the boot.img used to root the phone is running PD6, and that the next step is to acquire the PD8 file and apply via Odin utility. Are there steps anywhere for this process? I'll even settle for the file link only, and I figure out the rest.
Thank you in advance!