Database Info

[Q] I need help with Odin

My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?

crazyshin said:
My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?
Click to expand...
Click to collapse
different usb cord

I got through the factory.rfs but now I'm stuck on the boot logo

crazyshin said:
I got through the factory.rfs but now I'm stuck on the boot logo
Click to expand...
Click to collapse
3 fingers into recovery; factory reset, reboot?

@crazyshin -
What ROM were you running before attempting your first ODIN flash?
What ODIN package are you attempting to install (provide link if possible)?

[Completed] Odin There is no PIT partition (Galaxy s4 SGH-1337M)

I am using odin 3.09 to flash stock firmware on my rooted cyangenmod Galaxy s4 (SGH-1337m).
but when I press start this is what odin gives me :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks in advanced !

Hi, thank you for using XDA Assist. Try a more recent firmware. In general you can't go back to older firmware on Samsung devices. You're issue is not a missing pit file. For further help ask here, http://forum.xda-developers.com/showthread.php?t=2320430

[help] n8020 restarted alone & freez at logo & ODIN failed!!

oh my god!
what is happened?
it was at my side on the bed, not under usage. it did a restart .. alone .. and could not enter the system. it freez at logo!
i tried:
- to wipe, but could not help.
- get the last backup with cmw, but could not help.
- flash tle stock recovery with odin, but gone fail.
- flash a fresh stock room with odin, but gone fail.
- flash pit file with odin, but gone fail.
it can enter download and recovery modes.
what was happened?
i am not beginner and could help many people with much of problems, but .. this thing is totally new for me.
who can help please? i can not still without my note. i use it all the time, specially now where i am in a new country and city
so .... heeeeeeeeeeeeeeeeeelllllllllp
-------------- 1st update
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------- 2nd update
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work

What is the ODIN fail message ??

JJEgan said:
What is the ODIN fail message ??
Click to expand...
Click to collapse
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

is there maybe any methode mith ADB or any tool?

I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work

Can't open the serial(COM) port
Google suggests USB cable problem or KIES? USB drivers .
http://forum.xda-developers.com/showthread.php?t=1622790
https://www.google.co.uk/search?q=a...source=hp&gfe_rd=cr&ei=zkMFVp7fCaux0wW8nKLoCw

but i work with other devices, also with this device before this problem

i deinstalled Kies and the driver, reinstaller the driver and tried again, but it is the same

no help
where to sell it as bricked of defect?

dercncplaner said:
no help
where to sell it as bricked of defect?
Click to expand...
Click to collapse
EBay and describe the problem .

Samsung Tab GT-N8010 Rom doesn't Install, PIT issue, Flashing Screen, do not turn ON
I have Samsung Tab GT-N8010
When I try to turn on, its screen flashing White for half second and then Black and Continuosly till the Battery End.
I try to Install ROM 4.4.2 with ODIN 3.10.7 and get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different PIT files including 3 different N8010.pit and 8013.pit and 8020.pit
but the issue remaining same
I read all the google search including Russian websites at-least but I couldn't find the issue
I have original cable

Solution
I know now the problem and the solution.
The problem: The flash memory on the mainboard is defect. This was the answer of Samsung Support Office.
The solution: The mainboard have to be replaced.
I am now in Turkey and here there is no N8020, but just a bad version (N8005) !!!
So, Samsung could not repair it for me. But I found everything I need for the repair on ifixit, also the board, B´but I could not collect the money for that, so maybe I wait or sell it. Here in turkey no one want to buy it because the phones here have to be registered and this costs much of money. hmm

Looking for help with my bricked Note 5 Sprint

https://forum.xda-developers.com/not...3#post65243282
This is a post I made previously about a year ago. Yesterday I picked the phone back up and tried to figure things out again. A year ago I never really got anywhere. I have never flashed anything or used Odin.
This is how far I got yesterday and I am looking for some advice. I tried flashing a stock ROM via Odin because the guy who commented said I should try that. So yesterday I did.
This is the site I followed.
https://devs-lab.com/how-to-unbrick-...xy-note-5.html
I downloaded Odin3 v3.10.0. I then downloaded Samsung Keys to install the usb driver but it wouldn't even detect the phone. That didn't work so I went here to get the drivers installed.http://www.samsung.com/us/support/ow...y-note5-sprint
I then downloaded the stock Rom the website had on it that matched the Product name SM-n920P that comes up when the phone is in download mode.
http://stockroms.net/file/GalaxyNote...T2BPC3_SPR.zip
After that finally downloaded I extracted the Rom to the desktop. I opened Odid clicked on AP like the website said and clicked Start. I then received a Nand Write Start error and nothing happens.
Here is a picture of what Odin looks like when I tried to do it.
http://i.imgur.com/31hTrq3.jpg
Thank you for your help and if I sound like a moron I am sorry I am not very experience when it comes to this.

- When you add the tar.md5 file don't remove the .md5, it will verify the file integrity and may take a few minutes to do so.
- You must be in download mode to use Odin. When you attach the phone, one of the squares should light up telling you which com port is attached.
- You might be blocked from flashing older firmware, PC3 is rather old. Try a newer firmware. All firmwares are available in my repository:
https://www.mediafire.com/folder/byye3kocz6nn4/Stock_Roms_Note_5
Files are zipped. Unzip and place the tar.md5 in AP.

tdunham said:
- When you add the tar.md5 file don't remove the .md5, it will verify the file integrity and may take a few minutes to do so.
- You must be in download mode to use Odin. When you attach the phone, one of the squares should light up telling you which com port is attached.
- You might be blocked from flashing older firmware, PC3 is rather old. Try a newer firmware. All firmwares are available in my repository:
https://www.mediafire.com/folder/byye3kocz6nn4/Stock_Roms_Note_5
Files are zipped. Unzip and place the tar.md5 in AP.
Click to expand...
Click to collapse
I forgot to mention I did have the phone in download mode when I previously attempted to download that file on Odin.
I think I just added the file I didn't know the .md5 got removed. Should I add it a different way to make sure it isn't removed.
Which firmware in the repository should I use? They all look like the same thing to me. Except for the one at the end that says full wipe.
Should I just download one of the newer firmwares on that list and put the phone into download mode and give it another go? If so which file and how?
Again thank you for your help and I apologize if you have already told me something and I just didn't understand.

Don't mess with file extension.
They aren't listed chronologically but alphabetically, pd is newer than pc3 and so on. Try pd2 first maybe.

Alright thanks bro I appreciate all your help and understanding. I will try the 2nd one like you said. It says it will take 2 hours to download so I can use it on Odin and give it a try. I will post an update later crossing my fingers this works.

tdunham said:
Don't mess with file extension.
They aren't listed chronologically but alphabetically, pd is newer than pc3 and so on. Try pd2 first maybe.
Click to expand...
Click to collapse
Here was was Odin said when I tried.
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
Ok I try the pd2 and flashed it on Odin the device was in download mode but I didn't have any success . What should I try next?

Pk1 or pl1

tdunham said:
Pk1 or pl1
Click to expand...
Click to collapse
Alright so I tried Pl1 on Odin and I tried Pk1 but neither seemed to work here are the Odin scripts I got from them. I'm not sure what to try next, what do you think I should try?
PL1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
PK1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..

try a different cable, try the cable in a different usb port or try it on another computer too if that doesn't work.
You could also try taking it to the sprint store and having them flash it for you. I think they might charge a fee for that, so ask first.

tdunham said:
try a different cable, try the cable in a different usb port or try it on another computer too if that doesn't work.
You could also try taking it to the sprint store and having them flash it for you. I think they might charge a fee for that, so ask first.
Click to expand...
Click to collapse
Alright I tried them all again with a new cord and a different port. When my cousin gave me the phone I don't think the contract was left in a good standing. Would providing them with the phone show up under his name and possibly make them not want to do it? Also any idea on how much they may charge if you had to guess? I'm really strapped for cash right now and am trying to fix this phone for my dad because his phone is messing up and we can't afford another phone. Do you think I should try to flash some different ones off the list you provided and give it a shot? I was hoping to fix it at home because I'm not sure what Sprint will say when I go up there. Here are the retries. Thanks again for all the help, sorry it keeps being such a hassle.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPK1_N920PSPT3BPK1_N920PVPS3BPK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPK1_N920PSPT3BPK1_N920PVPS3BPK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Please wait..
<OSM> N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPJ2_N920PSPT3BPJ2_N920PVPS3BPJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Bingo308 said:
Alright I tried them all again with a new cord and a different port. When my cousin gave me the phone I don't think the contract was left in a good standing. Would providing them with the phone show up under his name and possibly make them not want to do it? Also any idea on how much they may charge if you had to guess? I'm really strapped for cash right now and am trying to fix this phone for my dad because his phone is messing up and we can't afford another phone. Do you think I should try to flash some different ones off the list you provided and give it a shot? I was hoping to fix it at home because I'm not sure what Sprint will say when I go up there. Here are the retries. Thanks again for all the help, sorry it keeps being such a hassle.
Click to expand...
Click to collapse
I don't know what Sprint charges, it used to be $35. They may not look at it if there is no active account for it anyway.
Maybe check with some local cell third party phone shops and ask what they would charge to flash the factory image back to the phone.

I suggest you to change usb cable, reinstall drivers on pc, use a different usb port, if still same try on a different computer. It looks like phone isn't in download mode in logs from odin

matthew2man said:
I suggest you to change usb cable, reinstall drivers on pc, use a different usb port, if still same try on a different computer. It looks like phone isn't in download mode in logs from odin
Click to expand...
Click to collapse
I think it's been in download mode it says downloading and do not turn off target. Do you think maybe I have a bad version of Odin or installed the wrong drivers. Do these drivers look correct for this phone?
I downloaded the drivers here because the phone wouldn't pick up on Keis or smartswitch to do it.
http://www.samsung.com/us/support/owners/product/galaxy-note5-sprint

Bingo308 said:
I think it's been in download mode it says downloading and do not turn off target. Do you think maybe I have a bad version of Odin or installed the wrong drivers. Do these drivers look correct for this phone?
I downloaded the drivers here because the phone wouldn't pick up on Keis or smartswitch to do it.
http://www.samsung.com/us/support/owners/product/galaxy-note5-sprint
Click to expand...
Click to collapse
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.

Don't forget to change usb port from pc that you are using now with another one and see if any changes

tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
I went to the control panel and uninstalled kies and switch but the samsung drivers wont uninstall when i try. it says they uninstalled but they are still there. I tried restarting the computer and trying a few more times but it just wont uninstall.

tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
Ok I finally got it guys. I tried it ob my other computer and everything worked like a charm! The note is working great and lets me into it. Thank you so much for all you're help. I couldn't of done it alone. I just have one more question now. My dad is on AT&T is there a way I can unlock the phone to use the Sprint Note 5 on AT&T for my dad? I have the old sim card that my cousin left in it. It is a AT&T card for some reason not sure why. I thought about calling Sprint and asking them to do it but I don't have an account with them. Any more suggestions on what should do now to get the phone to work for my Dad on AT&T?:fingers-crossed:
Here is the script of the phone from Odin on my laptop.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!

tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
Dang I just tried to open the phone and it still has a Finger Print Lock. How can I get rid of this and gain access to the phone?

Bingo308 said:
Dang I just tried to open the phone and it still has a Finger Print Lock. How can I get rid of this and gain access to the phone?
Click to expand...
Click to collapse
There's a tool for that but it is difficult to use.
You should verify the phone has a clean esn, you can google that.
You wont be able to activate the phone on any U.S. carrier if the meid has been blacklisted anyway.

tdunham said:
There's a tool for that but it is difficult to use.
You should verify the phone has a clean esn, you can google that.
You wont be able to activate the phone on any U.S. carrier if the meid has been blacklisted anyway.
Click to expand...
Click to collapse
I got into the phone last night the FRP was already off. I guess when my cousin had it a year ago it had been turned off. So I hard reset the phone and it worked. Right now all you can do is use it on wifi. I'm gonna get the ESN checked and make sure it is clean then hopefully I can take it to Sprint and they will unlock it so I can use it at attached.

S6 Stuck at Logo Screen, flashed new ROM twice with no change

Hello,
A bit of back story first - yesterday, my mother's Galaxy S6 (SM-G920F) suddenly rebooted to the device's logo screen ( the "Samsung Galaxy S6....powered by android" one) and it's been stuck there since. There had been no "tinkering" so to say with the device; debugging was disabled, the bootloader had not been tampered with at all, and all the updates were done through the official android route. The last major update was around a month ago, to Nougat from MM, after which I cleared the cache. The latest update was about 10 days ago, a minor Nougat one, but the cache had not been wiped.
Now down to business. The phone does not turn off at all. Holding the power button and the volume down just reboots it to the same screen. That being such, I cannot access recovery mode. I can however access Download Mode which makes be believe that all hope is not lost.
Using Odin, I attempted to flash a stock ROM, which for this model was Android v5.1.1, and now I understand why that wouldn't work. At this point instead of the logo screen, it showed a blue screen saying something along the lines of "An error has occurred while updating your phone, please use Smart Switch emergency recovery". I had tried to connect to smart switch before but it wouldn't recognize the device. I was saving initialization as a last resort.
I then flashed the most recent MM ROM for this model (which I found on sammmobile) using Odin, having read it was possible to still downgrade, and believing that perhaps Nougat was causing this problem. And it was successful, except the phone now returned to the logo screen. Again, with the same problems as before. And I still couldn't wipe the data and cache because I still couldn't access recovery mode.
Finally I connected the phone to Smart Switch and chose to initialize it. After going through all the steps, and downloading the files, it said it was successful but the phone is still stuck at the damn logo screen. I can still access download mode for what it's worth but I haven't a clue now as to what I should do next.
Any help or suggestions would be greatly appreciated. Thanks.

Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: PHN
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
If this method doesn't fix you issue, you have to replace the motherboard then.

no luck
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
...
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin.
If this method doesn't fix you issue, you have to replace the motherboard then.
Click to expand...
Click to collapse
thank you so much for your answer but it does not seem to have worked. I did everything as instructed but I'm not quite sure as to why this is happening exactly. This is the log from Odin, maybe it'll help:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
(when it said "please wait about two minutes" it actually proceeded to the next step very quickly)
It appears to have loaded successfully but it is still stuck at the logo screen. Could you please explain why this not working would mean I would have to replace the motherboard? Thank you once again
(also I'm running Odin with only "Auto Reboot" and "F.Reset Time" ticked, don't know if that will help)

rayofmoonshine said:
thank you so much for your answer but it does not seem to have worked. I did everything as instructed but I'm not quite sure as to why this is happening exactly. This is the log from Odin, maybe it'll help:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
(when it said "please wait about two minutes" it actually proceeded to the next step very quickly)
It appears to have loaded successfully but it is still stuck at the logo screen. Could you please explain why this not working would mean I would have to replace the motherboard? Thank you once again
Click to expand...
Click to collapse
Odin log says that there's no problem.
The produce I've wrote above is the last think you can do on new Samsung devices.

forumber2 said:
Odin log says that there's no problem.
The produce I've wrote above is the last think you can do on new Samsung devices.
Click to expand...
Click to collapse
Do you have any idea what could have caused this issue? Would changing the motherboard be guaranteed to fix this and if so, how?

rayofmoonshine said:
Do you have any idea what could have caused this issue? Would changing the motherboard be guaranteed to fix this and if so, how?
Click to expand...
Click to collapse
Replacing motherboard will not help You unless You have a way to program EFS and IMEI information to it.