https://forum.xda-developers.com/not...3#post65243282
This is a post I made previously about a year ago. Yesterday I picked the phone back up and tried to figure things out again. A year ago I never really got anywhere. I have never flashed anything or used Odin.
This is how far I got yesterday and I am looking for some advice. I tried flashing a stock ROM via Odin because the guy who commented said I should try that. So yesterday I did.
This is the site I followed.
https://devs-lab.com/how-to-unbrick-...xy-note-5.html
I downloaded Odin3 v3.10.0. I then downloaded Samsung Keys to install the usb driver but it wouldn't even detect the phone. That didn't work so I went here to get the drivers installed.http://www.samsung.com/us/support/ow...y-note5-sprint
I then downloaded the stock Rom the website had on it that matched the Product name SM-n920P that comes up when the phone is in download mode.
http://stockroms.net/file/GalaxyNote...T2BPC3_SPR.zip
After that finally downloaded I extracted the Rom to the desktop. I opened Odid clicked on AP like the website said and clicked Start. I then received a Nand Write Start error and nothing happens.
Here is a picture of what Odin looks like when I tried to do it.
http://i.imgur.com/31hTrq3.jpg
Thank you for your help and if I sound like a moron I am sorry I am not very experience when it comes to this.
- When you add the tar.md5 file don't remove the .md5, it will verify the file integrity and may take a few minutes to do so.
- You must be in download mode to use Odin. When you attach the phone, one of the squares should light up telling you which com port is attached.
- You might be blocked from flashing older firmware, PC3 is rather old. Try a newer firmware. All firmwares are available in my repository:
https://www.mediafire.com/folder/byye3kocz6nn4/Stock_Roms_Note_5
Files are zipped. Unzip and place the tar.md5 in AP.
tdunham said:
- When you add the tar.md5 file don't remove the .md5, it will verify the file integrity and may take a few minutes to do so.
- You must be in download mode to use Odin. When you attach the phone, one of the squares should light up telling you which com port is attached.
- You might be blocked from flashing older firmware, PC3 is rather old. Try a newer firmware. All firmwares are available in my repository:
https://www.mediafire.com/folder/byye3kocz6nn4/Stock_Roms_Note_5
Files are zipped. Unzip and place the tar.md5 in AP.
Click to expand...
Click to collapse
I forgot to mention I did have the phone in download mode when I previously attempted to download that file on Odin.
I think I just added the file I didn't know the .md5 got removed. Should I add it a different way to make sure it isn't removed.
Which firmware in the repository should I use? They all look like the same thing to me. Except for the one at the end that says full wipe.
Should I just download one of the newer firmwares on that list and put the phone into download mode and give it another go? If so which file and how?
Again thank you for your help and I apologize if you have already told me something and I just didn't understand.
Don't mess with file extension.
They aren't listed chronologically but alphabetically, pd is newer than pc3 and so on. Try pd2 first maybe.
Alright thanks bro I appreciate all your help and understanding. I will try the 2nd one like you said. It says it will take 2 hours to download so I can use it on Odin and give it a try. I will post an update later crossing my fingers this works.
tdunham said:
Don't mess with file extension.
They aren't listed chronologically but alphabetically, pd is newer than pc3 and so on. Try pd2 first maybe.
Click to expand...
Click to collapse
Here was was Odin said when I tried.
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
Ok I try the pd2 and flashed it on Odin the device was in download mode but I didn't have any success . What should I try next?
Pk1 or pl1
tdunham said:
Pk1 or pl1
Click to expand...
Click to collapse
Alright so I tried Pl1 on Odin and I tried Pk1 but neither seemed to work here are the Odin scripts I got from them. I'm not sure what to try next, what do you think I should try?
PL1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
PK1
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
try a different cable, try the cable in a different usb port or try it on another computer too if that doesn't work.
You could also try taking it to the sprint store and having them flash it for you. I think they might charge a fee for that, so ask first.
tdunham said:
try a different cable, try the cable in a different usb port or try it on another computer too if that doesn't work.
You could also try taking it to the sprint store and having them flash it for you. I think they might charge a fee for that, so ask first.
Click to expand...
Click to collapse
Alright I tried them all again with a new cord and a different port. When my cousin gave me the phone I don't think the contract was left in a good standing. Would providing them with the phone show up under his name and possibly make them not want to do it? Also any idea on how much they may charge if you had to guess? I'm really strapped for cash right now and am trying to fix this phone for my dad because his phone is messing up and we can't afford another phone. Do you think I should try to flash some different ones off the list you provided and give it a shot? I was hoping to fix it at home because I'm not sure what Sprint will say when I go up there. Here are the retries. Thanks again for all the help, sorry it keeps being such a hassle.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPK1_N920PSPT3BPK1_N920PVPS3BPK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPK1_N920PSPT3BPK1_N920PVPS3BPK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPL1_N920PSPT3BPL1_N920PVPS3BPL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Please wait..
<OSM> N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPS3BPJ2_N920PSPT3BPJ2_N920PVPS3BPJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bingo308 said:
Alright I tried them all again with a new cord and a different port. When my cousin gave me the phone I don't think the contract was left in a good standing. Would providing them with the phone show up under his name and possibly make them not want to do it? Also any idea on how much they may charge if you had to guess? I'm really strapped for cash right now and am trying to fix this phone for my dad because his phone is messing up and we can't afford another phone. Do you think I should try to flash some different ones off the list you provided and give it a shot? I was hoping to fix it at home because I'm not sure what Sprint will say when I go up there. Here are the retries. Thanks again for all the help, sorry it keeps being such a hassle.
Click to expand...
Click to collapse
I don't know what Sprint charges, it used to be $35. They may not look at it if there is no active account for it anyway.
Maybe check with some local cell third party phone shops and ask what they would charge to flash the factory image back to the phone.
I suggest you to change usb cable, reinstall drivers on pc, use a different usb port, if still same try on a different computer. It looks like phone isn't in download mode in logs from odin
matthew2man said:
I suggest you to change usb cable, reinstall drivers on pc, use a different usb port, if still same try on a different computer. It looks like phone isn't in download mode in logs from odin
Click to expand...
Click to collapse
I think it's been in download mode it says downloading and do not turn off target. Do you think maybe I have a bad version of Odin or installed the wrong drivers. Do these drivers look correct for this phone?
I downloaded the drivers here because the phone wouldn't pick up on Keis or smartswitch to do it.
http://www.samsung.com/us/support/owners/product/galaxy-note5-sprint
Bingo308 said:
I think it's been in download mode it says downloading and do not turn off target. Do you think maybe I have a bad version of Odin or installed the wrong drivers. Do these drivers look correct for this phone?
I downloaded the drivers here because the phone wouldn't pick up on Keis or smartswitch to do it.
http://www.samsung.com/us/support/owners/product/galaxy-note5-sprint
Click to expand...
Click to collapse
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Don't forget to change usb port from pc that you are using now with another one and see if any changes
tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
I went to the control panel and uninstalled kies and switch but the samsung drivers wont uninstall when i try. it says they uninstalled but they are still there. I tried restarting the computer and trying a few more times but it just wont uninstall.
tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
Ok I finally got it guys. I tried it ob my other computer and everything worked like a charm! The note is working great and lets me into it. Thank you so much for all you're help. I couldn't of done it alone. I just have one more question now. My dad is on AT&T is there a way I can unlock the phone to use the Sprint Note 5 on AT&T for my dad? I have the old sim card that my cousin left in it. It is a AT&T card for some reason not sure why. I thought about calling Sprint and asking them to do it but I don't have an account with them. Any more suggestions on what should do now to get the phone to work for my Dad on AT&T?:fingers-crossed:
Here is the script of the phone from Odin on my laptop.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920PVPU2BPD2_N920PSPT2BPD2_N920PVPU2BPD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
tdunham said:
Yes version ver. 1.5.45.00 looks fine.
Uninstall kies & smartswitch if they are installed and also the Samsung driver suite. Reboot and just install the drivers alone. They may be conflicting.
Click to expand...
Click to collapse
Dang I just tried to open the phone and it still has a Finger Print Lock. How can I get rid of this and gain access to the phone?
Bingo308 said:
Dang I just tried to open the phone and it still has a Finger Print Lock. How can I get rid of this and gain access to the phone?
Click to expand...
Click to collapse
There's a tool for that but it is difficult to use.
You should verify the phone has a clean esn, you can google that.
You wont be able to activate the phone on any U.S. carrier if the meid has been blacklisted anyway.
tdunham said:
There's a tool for that but it is difficult to use.
You should verify the phone has a clean esn, you can google that.
You wont be able to activate the phone on any U.S. carrier if the meid has been blacklisted anyway.
Click to expand...
Click to collapse
I got into the phone last night the FRP was already off. I guess when my cousin had it a year ago it had been turned off. So I hard reset the phone and it worked. Right now all you can do is use it on wifi. I'm gonna get the ESN checked and make sure it is clean then hopefully I can take it to Sprint and they will unlock it so I can use it at attached.
Related
I lost my 4g randomly. Blown sim maybe? But i'm trying to return to a touchwiz stock rom so that I can attempt a sim reprovision, but odin won't flash the device.
Here's the odin log
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I535VRALG1_I535VZWALG1_743127_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone seen something like this before? Or solutions to the no 4g problem as thats the root cause of all of this mess.
note: My IMEI is still in tact.
Back in the day I lost data and imei from flashing 4.2.2 roms
I would have to go back to stock to fix.
I would have this problem and I was clueless
For whatever reason I tired on my moms computer and it worked fine.
It was not a bad download either. I still use the same files to date.
Hope this works for you.
God bless the American people
howlatnight said:
I lost my 4g randomly. Blown sim maybe? But i'm trying to return to a touchwiz stock rom so that I can attempt a sim reprovision, but odin won't flash the device.
Here's the odin log
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I535VRALG1_I535VZWALG1_743127_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone seen something like this before? Or solutions to the no 4g problem as thats the root cause of all of this mess.
note: My IMEI is still in tact.
Click to expand...
Click to collapse
Try this link, http://forum.xda-developers.com/showthread.php?t=1762709
Welp, just trying it from my desktop worked. odd. Brought it back to VZW got a new sim. The world is good again.
Q&A for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?
SG2Tiger said:
Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?
Click to expand...
Click to collapse
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?
joel.maxuel said:
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?
Click to expand...
Click to collapse
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).
SG2Tiger said:
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).
Click to expand...
Click to collapse
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523
joel.maxuel said:
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523
Click to expand...
Click to collapse
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
SG2Tiger said:
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"
joel.maxuel said:
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"
Click to expand...
Click to collapse
For some reason option D is taking an unreasonable amount of time to download (it's been over an hour now), so I had initially skipped it and tried options A and C, with the same results. I'll report back once I am actually able to get option D downloaded.
Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
SG2Tiger said:
Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Last thing I can think of, you are using the Odin that comes with the package right?
joel.maxuel said:
Last thing I can think of, you are using the Odin that comes with the package right?
Click to expand...
Click to collapse
Yes, it should be Odin3 v1.7.
The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.
Umaroth said:
The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.
Click to expand...
Click to collapse
Sorry, no option A here, but I do have option C (with CWM, deodex, etc) on mirror. See the following link:
http://forum.xda-developers.com/showpost.php?p=58392432
Hope this helps.
Link Are Broken
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found
ZExNos said:
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found
Click to expand...
Click to collapse
Good evening,
Try my mirror:
http://forum.xda-developers.com/showpost.php?p=58392432
Options are limited, only "Option C" but it should be enough to get the job done.
Cheers.
Hi
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
I use windows 10, I have the kies drivers and am using the phone's original cable
any ideas ?
Try running odin as an administrator. Right click on odin and run as administrator
By any chance are you getting error 43 device descriptor errors? I had that happening to me yesterday after trying to flash using odin, the problem persisted even on another laptop running win8.1 but suddenly fixed itself
Ok look my friend now un connected ur phone from pc then un install samsung kies & drivers then reboot ur pc & now re install samsung kies with drivers now connect ur phone to pc & open odin then try it ok
iammrred said:
Hi
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
I use windows 10, I have the kies drivers and am using the phone's original cable
any ideas ?
Click to expand...
Click to collapse
Well I have had those problems too and they have always fixed themselves somehow.
Try different USB ports or even another PC. Make sure you use the newest version of Odin and make sure you run it as administrator. Try to reinstall your phones drivers otherwise.
@roydok
I already tried that, same problem. thank u man
@godutch
I didn't get that error
@thereassaad
I will try reinstalling the drivers, hope it works. thanx
@ Faspaiso
I tried another port, but i only have one laptop so i can't try another
but i will reinstall the drivers and see
thank u
i will be back
Also try a different USB cable. This was the culprit 1st time I flashed.
i tried everything suggested but same problem
but i found a website gives drivers for each phone in name, i downloaded the galaxy s6 drivers and it worked fine
i wanted everything to be erased but the update didn't delete anything!
is there a way to make erase everything by using odin ?
iammrred said:
i tried everything suggested but same problem
but i found a website gives drivers for each phone in name, i downloaded the galaxy s6 drivers and it worked fine
i wanted everything to be erased but the update didn't delete anything!
is there a way to make erase everything by using odin ?
Click to expand...
Click to collapse
I would use recovery for wiping partitions on my phone, not ODIN.
Otherwise, could you post a link to the website with the drivers that worked for you?
vordhosbnbg said:
I would use recovery for wiping partitions on my phone, not ODIN.
Otherwise, could you post a link to the website with the drivers that worked for you?
Click to expand...
Click to collapse
Here is the link :
http://androidxda.com/download-samsung-usb-drivers
Hi all,
Been out of the rooting game for some time. Got my Sprint S8 the other day and decided I wanted to take the plunge. Things did not go so well using SamFail Cyborg pre-rooted ROM.
I am trying to flash back to stock firmware via Odin (G950USQU1AQJH from updato.com), but I receive the below Odin fail:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is AQJH a flashable stock firmware, or is it an OTA? Can anyone confirm what I should be flashing to recover my device, and a download link if possible? I read in a separate thread that true stock firmware ends in AQC9 - but I cannot find that fimrware version anywhere. TIA!
UPDATE: I'm a dope, I was not running Odin as admin, which is why I could not flash anything and everything. RUN ODIN AS ADMIN, FELLOW DOPES!!!!!
Let me know. Cross your fingers!
Sent from my SM-G955U1 using Tapatalk
Goddly said:
Let me know. Cross your fingers!
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Samfail failed as everything else has, fairly quickly. Log:
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> NON-HLOS.bin
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Onto the firmware suggested in the other thread. Looking pretty grim...
So if the SamPWND 4 firmware files do not work you do the following:
flash G955USQU2BQK5 (from Sammobile/updato/etc)
After if you wish you can try Oreo from firmware science but you need BQK5 in this case to Oreo (zip update)
TopShelf10 said:
Samfail failed as everything else has, fairly quickly. Log:
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> NON-HLOS.bin
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Onto the firmware suggested in the other thread. Looking pretty grim...
Click to expand...
Click to collapse
It's failing at Boot...
I'm pretty sure flashing the AQK2 will flash. You'll have a working ROM. At least.
Sent from my SM-G955U1 using Tapatalk
He needs Sprint version.....
Goddly said:
He needs Sprint version.....
Click to expand...
Click to collapse
I thought the non carrier ones handle all, anyway the spirit version would be even a better bet indeed
rudimenta said:
I thought the non carrier ones handle all, anyway the spirit version would be even a better bet indeed
Click to expand...
Click to collapse
With the issues he's having.... Lol I'd try Sprints version...
Sent from my SM-G955U1 using Tapatalk
Goddly said:
With the issues he's having.... Lol I'd try Sprints version...
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Ok, all downloaded. And I should use regular Odin for this, right?
TopShelf10 said:
Ok, all downloaded. And I should use regular Odin for this, right?
Click to expand...
Click to collapse
Also, which settings should I check off in odin?
Ok so I flashed AQK2 via regular Odin (it did not come with a userdata file). I checked auto-reboot, freset time, nanderase, and bootloader update. It failed very quickly, citing error "FAIL! Model dismatch fail". Log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
TopShelf10 said:
Also, which settings should I check off in odin?
Click to expand...
Click to collapse
Regular settings, regular odin should work
rudimenta said:
Regular settings, regular odin should work
Click to expand...
Click to collapse
No-go, failed very quickly "model dismatch fail", see my above comment for log.
what phone you have, seems like you are flashing the wrong firmware. You have a galaxy s8plus right?
TopShelf10 said:
No-go, failed very quickly "model dismatch fail", see my above comment for log.
Click to expand...
Click to collapse
Ok.
Sent from my SM-G955U1 using Tapatalk
rudimenta said:
what phone you have, seems like you are flashing the wrong firmware. You have a galaxy s8plus right?
Click to expand...
Click to collapse
Sprint US S8 G950U (snap)
TopShelf10 said:
No-go, failed very quickly "model dismatch fail", see my above comment for log.
Click to expand...
Click to collapse
Use the modded Odin
I assume your right clicking, and running Odin as admin right?
After you extract the image (if you have to) remove the .md5 from the end.
Sent from my SM-G955U1 using Tapatalk
TopShelf10 said:
Sprint US S8 G950U (snap)
Click to expand...
Click to collapse
Make sure your firmware starts with G950 and not G955 in that case!
If thats correct try the modded odin like above post, if that doesn't work try this firmware G950USQU2BQK5 (unknown version) from sammobile firmware section and use the regular odin, just unpack and don't change any thing just load.
Goddly said:
Use the modded Odin
I assume your right clicking, and running Odin as admin right?
After you extract the image (if you have to) remove the .md5 from the end.
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
WOOOOOOOOO!!!!! IT......IS.............ALIIIIIIIIIVE! Was not running as admin, and not removing .MD5 (like I said, been out of the rooting game for a while running Blackberry)
Not in the clear yet though...it will boot to the welcome/start screen and then immediately power down on its own to display the battery charging display with no percentage or animation. This is great progress though!! I can reboot into recovery, and did perform a factory reset, however that did not help.
TopShelf10 said:
WOOOOOOOOO!!!!! IT......IS.............ALIIIIIIIIIVE! Was not running as admin, and not removing .MD5 (like I said, been out of the rooting game for a while running Blackberry)
Not in the clear yet though...it will boot to the welcome/start screen and then immediately power down on its own to display the battery charging display with no percentage or animation. This is great progress though!! I can reboot into recovery, and did perform a factory reset, however that did not help.
Click to expand...
Click to collapse
Lol. Well... You just screwed yourself into a new boot loader... [emoji23]
ALWAYS ALWAYS RUN AS ADMIN!
I'll bet you anything you could have flashed the Rom had you ran Odin in admin.... smh...
Sent from my SM-G955U1 using Tapatalk
---------- Post added at 10:49 PM ---------- Previous post was at 10:45 PM ----------
TopShelf10 said:
WOOOOOOOOO!!!!! IT......IS.............ALIIIIIIIIIVE! Was not running as admin, and not removing .MD5 (like I said, been out of the rooting game for a while running Blackberry)
Not in the clear yet though...it will boot to the welcome/start screen and then immediately power down on its own to display the battery charging display with no percentage or animation. This is great progress though!! I can reboot into recovery, and did perform a factory reset, however that did not help.
Click to expand...
Click to collapse
Try reflashing using regular Odin...
RUN AS ADMIN!
Man, I wish we would have waited to flash a U2 BL.
That should have been the ABSOLUTE LAST RESORT.
I would have pointed out Admin rights at some point. Lol
Sent from my SM-G955U1 using Tapatalk
Hey all,
Tried flashing back to stock firmware using my Galaxy S4 GT-I9505 using Odin but im getting this error relating to a pit file. I have googled it and downloaded a few pit files for the specific phone but its still not working.
I have flashed previous devices with this flash tool before with no issues usually just have to click AP and browse to the selected firmware click start and shes golden and it works no dramas. However with this device im having soo much bad luck. I have tried to pull my pit file using Miracle box however that doesnt work either, Ive also tried to pull it using ADB but I need ROOT and I dont have it on this device either. I have also tried to root with odin too and I get the same error. is there another program that I can use to pull my own pit file?
I have copied the Odin Log for a reference so hopefully someone can shed some light on this annoying issue cheers.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105TDVUEMK2_N7105TXSAEMK3_N7105TDVUEMK3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)