[Completed] Odin There is no PIT partition (Galaxy s4 SGH-1337M) - XDA Assist

I am using odin 3.09 to flash stock firmware on my rooted cyangenmod Galaxy s4 (SGH-1337m).
but when I press start this is what odin gives me :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
thanks in advanced !

Hi, thank you for using XDA Assist. Try a more recent firmware. In general you can't go back to older firmware on Samsung devices. You're issue is not a missing pit file. For further help ask here, http://forum.xda-developers.com/showthread.php?t=2320430

Related

[help] n8020 restarted alone & freez at logo & ODIN failed!!

oh my god!
what is happened?
it was at my side on the bed, not under usage. it did a restart .. alone .. and could not enter the system. it freez at logo!
i tried:
- to wipe, but could not help.
- get the last backup with cmw, but could not help.
- flash tle stock recovery with odin, but gone fail.
- flash a fresh stock room with odin, but gone fail.
- flash pit file with odin, but gone fail.
it can enter download and recovery modes.
what was happened?
i am not beginner and could help many people with much of problems, but .. this thing is totally new for me.
who can help please? i can not still without my note. i use it all the time, specially now where i am in a new country and city
so .... heeeeeeeeeeeeeeeeeelllllllllp
-------------- 1st update
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------- 2nd update
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
What is the ODIN fail message ??
JJEgan said:
What is the ODIN fail message ??
Click to expand...
Click to collapse
wenn i try to flash stock recovery:
Code:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020-Stock-Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> FAIL!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and wenn i try to flash stock rom 4.4.2:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8020XXUDNE4_N8020VFGDNE1_N8020BUDNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
is there maybe any methode mith ADB or any tool?
I tried everything, but nothing could work.
At the end I tried to restore with the advance setting, because when I resore my CWM-backup, it stop at mount /system and can not do that. So, I did:
- restore boot --> work
- restore cach -- > don't work
- restore data -- > don't work, rebooted alone
- restore system -- > don't work
Can't open the serial(COM) port
Google suggests USB cable problem or KIES? USB drivers .
http://forum.xda-developers.com/showthread.php?t=1622790
https://www.google.co.uk/search?q=a...source=hp&gfe_rd=cr&ei=zkMFVp7fCaux0wW8nKLoCw
but i work with other devices, also with this device before this problem
i deinstalled Kies and the driver, reinstaller the driver and tried again, but it is the same
no help
where to sell it as bricked of defect?
dercncplaner said:
no help
where to sell it as bricked of defect?
Click to expand...
Click to collapse
EBay and describe the problem .
Samsung Tab GT-N8010 Rom doesn't Install, PIT issue, Flashing Screen, do not turn ON
I have Samsung Tab GT-N8010
When I try to turn on, its screen flashing White for half second and then Black and Continuosly till the Battery End.
I try to Install ROM 4.4.2 with ODIN 3.10.7 and get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried different PIT files including 3 different N8010.pit and 8013.pit and 8020.pit
but the issue remaining same
I read all the google search including Russian websites at-least but I couldn't find the issue
I have original cable
Solution
I know now the problem and the solution.
The problem: The flash memory on the mainboard is defect. This was the answer of Samsung Support Office.
The solution: The mainboard have to be replaced.
I am now in Turkey and here there is no N8020, but just a bad version (N8005) !!!
So, Samsung could not repair it for me. But I found everything I need for the repair on ifixit, also the board, B´but I could not collect the money for that, so maybe I wait or sell it. Here in turkey no one want to buy it because the phones here have to be registered and this costs much of money. hmm

[Completed] Phone is soft bricked!

Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
[IMG="ERROR"]
URGENTLY NEED HELP!
Thanks guys
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Verizon Galaxy S 5 Q&A, Help & Troubleshooting
Good luck!

Samsung w8 cant install bootloader/modem for SuperHero Rom

Hi
Is it possible to install a new bootloader (ex: the G930F) on my G930W8 (S7)? Because I want the SuperHero Rom on my device and Odin is showing me an error
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Note: I want to install the G930F modem too
Also, can't post in DevDB, I don't know why
No you can't flash a bootloader (or modem afaik) for a different model S7
If you had managed, you would be the proud owner of a brick atm

Trying to unbrick G930T and return to stock.

Hey, I'm trying to return to stock firmware but all I can do is enter recovery or download mode. I tried to download odin 3.11 and previous user used and flash latest stock firmware from sammobile but all I get in odin is fails.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I'm flashing all 4 files CP,BL,AP,CSC
Sometimes I also get error FUSE 1 Binary or PIT
Any clues?
EDIT: WORKS!!! 3.11v of ODIN + SAMMOBILE latest Firmware. + restart of PC

galaxy a13 unable to flash stock firmware

half the time it errors the other half it gets stuck on setup connection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6882 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6882 M
<ID:0/009> SetupConnection..
Which Galaxy a13?
Why Odin 3.14 and not 3.13.1?
What file are you flashing?
How did you set up Odin?
ze7zez said:
Which Galaxy a13?
Why Odin 3.14 and not 3.13.1?
What file are you flashing?
How did you set up Odin?
Click to expand...
Click to collapse
whats the difference?
stock rom
default settings
]
edit: tried again with 3.13
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6958 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> up_param.bin
<ID:0/005> ldfw.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources