[Q] I need help with Odin - Samsung Infuse 4G

My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?

crazyshin said:
My phone is in the download mode however everytime I try to use Odin, it won't get past factoryfs.rfs.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UCKD5.tar.md5 is valid.
<OSM> PHONE_UCKD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.rfs
This morning I tried it on my friend's laptop and it only went through half of factoryfs.rfs and it would just be stuck. My carrier is Rogers and I've been using GTG_ultimate_unbrick. I've also tried using heindell as well. On Heindell it says that Kernels can not be uploaded. Can anyone help me with this problem?
Click to expand...
Click to collapse
different usb cord

I got through the factory.rfs but now I'm stuck on the boot logo

crazyshin said:
I got through the factory.rfs but now I'm stuck on the boot logo
Click to expand...
Click to collapse
3 fingers into recovery; factory reset, reboot?

@crazyshin -
What ROM were you running before attempting your first ODIN flash?
What ODIN package are you attempting to install (provide link if possible)?

Related

problem with odin

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_KD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1813)
<OSM> All threads completed. (succeed 0 / failed 1)
it wont let me go to kd1 from kg6 am not sure why i tried taking out battery and restarting doesnt work any help is appreciated plz and ty
also i have tried odin back to kc1 still same thing 1813 problem
ok nm i got it to work just had to take out battery like 50 times... thanks going back to kc1 now then kd then to kg6 ty

[Q] HELP ! I am a noob and I am stuck in download mode !

Please Help!
I am stuck in download mode with Odin 3! My Samsung Captivate i896 is plugged into the computer and Odin is running but it looks like Odin may have frozen. I am trying to flash Gingerbread 2.3.3 Rogers Stock Rom as my phone is soft bricked.
Here are the steps so far:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I896UXKH2-HOMEBINARY.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Please help me!
how long have you wait for??

bricked phone! please help!

hey guys, my phone seemed to have mysteriously bricked yesterday...i hadn't made any changes, and it had been working fine for weeks...anyway:
tried the method used here: http://forum.xda-developers.com/showthread.php?t=1840030&highlight=brick
and after flashing the first file in odin, it's just stuck... it's been going about 15 minutes and the green line is stuck with "ABOOT" in the box above it
in the message box is:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootchain.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
what do i do? can i unplug the phone?? do i just wait?? thanks in advice, it's so very much appreciated.

Problem with Odin

Hi
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
I use windows 10, I have the kies drivers and am using the phone's original cable
any ideas ?
Try running odin as an administrator. Right click on odin and run as administrator
By any chance are you getting error 43 device descriptor errors? I had that happening to me yesterday after trying to flash using odin, the problem persisted even on another laptop running win8.1 but suddenly fixed itself
Ok look my friend now un connected ur phone from pc then un install samsung kies & drivers then reboot ur pc & now re install samsung kies with drivers now connect ur phone to pc & open odin then try it ok
iammrred said:
Hi
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9200ZHU1AOD3_G9200ZZH1AOD3_G9200ZHU1AOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
I use windows 10, I have the kies drivers and am using the phone's original cable
any ideas ?
Click to expand...
Click to collapse
Well I have had those problems too and they have always fixed themselves somehow.
Try different USB ports or even another PC. Make sure you use the newest version of Odin and make sure you run it as administrator. Try to reinstall your phones drivers otherwise.
@roydok
I already tried that, same problem. thank u man
@godutch
I didn't get that error
@thereassaad
I will try reinstalling the drivers, hope it works. thanx
@ Faspaiso
I tried another port, but i only have one laptop so i can't try another
but i will reinstall the drivers and see
thank u
i will be back
Also try a different USB cable. This was the culprit 1st time I flashed.
i tried everything suggested but same problem
but i found a website gives drivers for each phone in name, i downloaded the galaxy s6 drivers and it worked fine
i wanted everything to be erased but the update didn't delete anything!
is there a way to make erase everything by using odin ?
iammrred said:
i tried everything suggested but same problem
but i found a website gives drivers for each phone in name, i downloaded the galaxy s6 drivers and it worked fine
i wanted everything to be erased but the update didn't delete anything!
is there a way to make erase everything by using odin ?
Click to expand...
Click to collapse
I would use recovery for wiping partitions on my phone, not ODIN.
Otherwise, could you post a link to the website with the drivers that worked for you?
vordhosbnbg said:
I would use recovery for wiping partitions on my phone, not ODIN.
Otherwise, could you post a link to the website with the drivers that worked for you?
Click to expand...
Click to collapse
Here is the link :
http://androidxda.com/download-samsung-usb-drivers

After flashing Bootloader, Galaxy s7 edge fails to boot

I tryede to install Nougat on SM-G935F, after i flashed the bootloader my phone keep rebooting when im trying to flash in odin can anyone tell my what do do?? is the phone destroide?
in ODIN
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G935FXXS1APG3_CL8252943_QB10235864_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
Then the phone reboots an samsung galaxy start screen shows, the phone is not able to boot in recovery mode, only download mode

Categories

Resources