Okay... So i'm using my dad's old Canvas Knight which is a mtk 6592 device. It had many viruses and I tried factory resetting it but didn't do any good. So here's what i did next. There were no good custom ROM's for my device(or any at all) so I looked for porting some other ROM. I found this website mtkroms dot com and saw many users were using this guys guide to install other custom ROMs. I made a port for myself for this rom :-Lollifox V6 for mt6592 . At first I was unable to install it because of a status 6 error but I got around it googling stuff. Now when the ROM Successfully flashed and after rebooting my phone its stuck at the bootlogo. If I press the power button it just reboots and gets stuck at the logo again. Next I opened CWM again and tried to usb mount my device so I could install the stockrom but again it gave an error(something like unable to load ums file or something). same happened when i tried to mount sd card. I also made a mtk Droid tools backup for it. I tried to install it using sp flash tools, it started successfully but the whole process just took about a 5 seconds. rebooted my phone again, only now the old boot logo was back and the phone was stuck again at the boot screen. PLZ help....
PS:- I Backed up almost everything before the whole process also I can access my internal sd card if choose the install from internal sd card option in CWM.
Hi, thank you for using XDA Assist. It's very common when trying to port a rom to get into a bootloop if the port has some errors in it. What you most likely need to do is either restore your nandroid in your custom recovery, if you have one, or return your device to stock and start over. There isn't a forum for your device on XDA but I did find this where others with your device may baa able to help you, http://forum.xda-developers.com/showthread.php?t=2623192
jd1639 said:
Hi, thank you for using XDA Assist. It's very common when trying to port a rom to get into a bootloop if the port has some errors in it. What you most likely need to do is either restore your nandroid in your custom recovery, if you have one, or return your device to stock and start over. There isn't a forum for your device on XDA but I did find this where others with your device may baa able to help you, http://forum.xda-developers.com/showthread.php?t=2623192
Click to expand...
Click to collapse
Hey!!
Thanks for replying. So I tried to restore my nandroid in CWM but it gives an error saying "E: Can't mount /sdcard". As I mentioned it earlier I tried to restore my StockRom using SP flash tools but the whole process took 5 seconds to complete. To no surprise It was stuck again at the bootscreen. The only diffrence was that this time the old bootlogo was back(the stock one).
amr03 said:
Hey!!
Thanks for replying. So I tried to restore my nandroid in CWM but it gives an error saying "E: Can't mount /sdcard". As I mentioned it earlier I tried to restore my StockRom using SP flash tools but the whole process took 5 seconds to complete. To no surprise It was stuck again at the bootscreen. The only diffrence was that this time the old bootlogo was back(the stock one).
Click to expand...
Click to collapse
Try asking in the link i posted. They are the experts on your device.
shivajiv said:
...
Click to expand...
Click to collapse
Please read the Stickies: http://forum.xda-developers.com/showthread.php?t=2783031
Related
Yesterday, trying to flash the new rom "OptimusRs Rom v1" and following the author instructions I bricked my phone cause the I have formated system and sd partitions.
Now, The phone shows the LG logo when i put in the batery.
I still have access to CWM recovery but restore function can't access to my external card where I have my backups.
So, I'm stucked in the LG logo.
As I never flashed before using the tools here, I ask for some help about the best tool(s) and guide(s) to install stcock GB Rom.
Thank you all and a happy and prosperous New Year
DC
flash another compatible rom Using cwm.
and read the descriptions carefully.
Sent from my LG-P920 using xda app-developers app
dcoelho said:
Yesterday, trying to flash the new rom "OptimusRs Rom v1" and following the author instructions I bricked my phone cause the I have formated system and sd partitions.
Now, The phone shows the LG logo when i put in the batery.
I still have access to CWM recovery but restore function can't access to my external card where I have my backups.
So, I'm stucked in the LG logo.
As I never flashed before using the tools here, I ask for some help about the best tool(s) and guide(s) to install stcock GB Rom.
Thank you all and a happy and prosperous New Year
DC
Click to expand...
Click to collapse
in recovery go to :-
"mount' and then select "mount usb...." connect with your PC and copy a custom ROM to your phone .
Then flash it through recovery .
OS_Hacking said:
in recovery go to :-
"mount' and then select "mount usb...." connect with your PC and copy a custom ROM to your phone .
Then flash it through recovery .
Click to expand...
Click to collapse
Thanks Man.
I was mounting "sdcard". when the right way was "mount usb"
Is solved.
Thanks again
Hello, I know I am an idiot for this.
But I tried to create my own rom, following a guide carefully.
It was a miui rom and I skipped only one thing, because I couldn't find it. I don't think it was anything important that could have caused my dilemma.
To get to the point.
I have the Nexus S 4G
Using TWRP Recovery
I made a backup of my stock rom
I flashed the Rom(I created) and it failed to flash.
So I tried to restore my Stock rom. Once it said it completed.
I tried to reboot and it just brought me back to bootloader screen.
I'm panicking now.
So I use my root toolkit to flash CWM recovery and tried to install a
new rom on my phone, but it's not working
when I try to boot up into a new rom, all I get is a black screen.
HELP PLEASE. ((
edit: when I went back into TWRP to check the log, it said "can't mount SD"
and I went to MOUNT and Sdcard was mounted..
I tried flashing my Xperia SL with cm 12. Unfortunately after installing cwm recovery, i forgot to back up the stock rom and factory reseted the whole device cleaning everything on the sd card. Now my phone is left without a rom and when i connect it to the pc, It is not being detected. When i switch on the phone it goes to cwm recovery and that's it. Every file i click on it says not found, and i tried mounting the usb as well. Same story. File cannot be found. What should i do now? I can't access anything on my phone. Is it possible to revert back to the stock rom i.e, Android 4.1.2? Please help.
Hi, thank you for using XDA Assist. See if this helps, http://forum.xda-developers.com/showthread.php?t=2038445
Thread closed.
Hi, I came here because I've tried to fix my phone but no hope. My situation si that I'm on a Loop in the booting process where the phone starts the booting process but crashes maybe on the bootloader. My system can see the Port COM 4 and I tried the Mobile upgrade program but after it detects the phone and I click "Update" button the phone goes into the loop maybe trying to get into Fastboot. Lastly, the download fails.
I have never hacked or made any modifications on an Android phone before so I'm a complete noob to this ADB tools and don't have a clue on how to use any tool to recover this phone.
I'm able to boot into "Download mode" and nothing else, maybe there's a combination for getting into the bootloader but I don't see anything about that in the many searches.
Any help is much appreciated.
you device is bricked and you try root install a custom rom or a bad upgrade
ravendepth said:
Hi, I came here because I've tried to fix my phone but no hope. My situation si that I'm on a Loop in the booting process where the phone starts the booting process but crashes maybe on the bootloader. My system can see the Port COM 4 and I tried the Mobile upgrade program but after it detects the phone and I click "Update" button the phone goes into the loop maybe trying to get into Fastboot. Lastly, the download fails.
I have never hacked or made any modifications on an Android phone before so I'm a complete noob to this ADB tools and don't have a clue on how to use any tool to recover this phone.
I'm able to boot into "Download mode" and nothing else, maybe there's a combination for getting into the bootloader but I don't see anything about that in the many searches.
Any help is much appreciated.
Click to expand...
Click to collapse
First boot into recovery and wipe cache and data.
If that fails try again. It fails again use the below method to restore your phone.
Go into download mode and using the ABD install your stock rom., Meaning your phones original version.
Your phones not bricked.
Stuck at Bootscreen (BootLoop)
Custo481 said:
First boot into recovery and wipe cache and data.
If that fails try again. It fails again use the below method to restore your phone.
Go into download mode and using the ABD install your stock rom., Meaning your phones original version.
Your phones not bricked.
Click to expand...
Click to collapse
Hi,
I tried to install RR on my Alcatel Idol 3 4.7 with using Shara & Firehorse according to this thread https://forum.xda-developers.com/idol-3/general/guide-unlock-flash-root-updated-alcatel-t3751845
everything went accordingly but TWRP never installed. I to boot into recovery and it booted android recovery instead of TWRP. So i tried again using Firehorse but my phone did not boot to download mode, so i cleared cache using the Android system recovery but then i received an error can't mount cache/recovery , so i tried to reset to factory data and received yet again other errors. Force-Restarting my phone ended up in a bootloop that i am not sure how to remove. Please help
Model: Alcatel One Touch Idol 3 6039 K
its-ian said:
Hi,
I tried to install RR on my Alcatel Idol 3 4.7 with using Shara & Firehorse according to this thread https://forum.xda-developers.com/idol-3/general/guide-unlock-flash-root-updated-alcatel-t3751845
everything went accordingly but TWRP never installed. I to boot into recovery and it booted android recovery instead of TWRP. So i tried again using Firehorse but my phone did not boot to download mode, so i cleared cache using the Android system recovery but then i received an error can't mount cache/recovery , so i tried to reset to factory data and received yet again other errors. Force-Restarting my phone ended up in a bootloop that i am not sure how to remove. Please help
Model: Alcatel One Touch Idol 3 6039 K
Click to expand...
Click to collapse
Hi, you may want to try a different TWRP recovery. Had the same problem. solved with TWRP 3.0.0 f2fs from Decker's MM TWRP backup. TWRP 3.1 also works with Sahara&Firehose.
Hope this helps.
Hi.
A friend gave me his Moto G1 2013 to install Linage OS but I'm really having troubles with it, first of all it doesn't allow me to install TWRP, when I type fastboot flash recovery recovery.img it says that it installs but it doesn't, when I try to boot on it it just doesn't boot, the way I had access to TWRP was typing fastboot boot recovery.img...
When I got in I did the first step when you install a new Custom ROM that is wipe system, cache and dalvik cache, then I tried to install the ROM zip file but it gave me "error 7" I looked for solutions and I found one that is modifying updater-script file, I did it but it gave me another error about mount system, I looked for solutions too and I found one that is modifying file system format to anotherone and then bringing it back to the original format but still having the same error.
After that I decided to go back to stock ROM, I have flashed many times the stock ROM with fastboot commands but it just doesn't boot into the OS, when I try to boot the phone it boots into bootloader again... Any solution to this? Is it a hardware problem? Please help me I'm so embarrased with my friend.
Same thing happened to me!
Basidialfiddle said:
Hi.
A friend gave me his Moto G1 2013 to install Linage OS but I'm really having troubles with it, first of all it doesn't allow me to install TWRP, when I type fastboot flash recovery recovery.img it says that it installs but it doesn't, when I try to boot on it it just doesn't boot, the way I had access to TWRP was typing fastboot boot recovery.img...
When I got in I did the first step when you install a new Custom ROM that is wipe system, cache and dalvik cache, then I tried to install the ROM zip file but it gave me "error 7" I looked for solutions and I found one that is modifying updater-script file, I did it but it gave me another error about mount system, I looked for solutions too and I found one that is modifying file system format to anotherone and then bringing it back to the original format but still having the same error.
After that I decided to go back to stock ROM, I have flashed many times the stock ROM with fastboot commands but it just doesn't boot into the OS, when I try to boot the phone it boots into bootloader again... Any solution to this? Is it a hardware problem? Please help me I'm so embarrased with my friend.
Click to expand...
Click to collapse
Hi! I tried something similar with a similar result. I first unlocked my Moto G's bootloader. Then installed TWRP using fastboot. After that I tried flashing Resurrection Remix rom which failed. I've been stuck in a kind of bootloop since then. My handset powers up, finds something wrong, tries to go into recovery, fails and does this over and over again.
Since I am able to boot into bootloader mode, I tried to flash the stock rom by following instructions from this thread https://forum.xda-developers.com/showthread.php?p=47820707#post47820707
I have tried different variations from many different forums (fora?) all with the same result. Still stuck in the bootloop-thingie.
Btw, I also tried the unbricking guide from this thread
https://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788 without any success. My phone shows up as a Motorola ADB device and also as XT1033 in Device Manager when its plugged in.
Anyone know anything to help me out?
gaurav.kar said:
Hi! I tried something similar with a similar result. I first unlocked my Moto G's bootloader. Then installed TWRP using fastboot. After that I tried flashing Resurrection Remix rom which failed. I've been stuck in a kind of bootloop since then. My handset powers up, finds something wrong, tries to go into recovery, fails and does this over and over again.
Since I am able to boot into bootloader mode, I tried to flash the stock rom by following instructions from this thread https://forum.xda-developers.com/showthread.php?p=47820707#post47820707
I have tried different variations from many different forums (fora?) all with the same result. Still stuck in the bootloop-thingie.
Btw, I also tried the unbricking guide from this thread
https://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788 without any success. My phone shows up as a Motorola ADB device and also as XT1033 in Device Manager when its plugged in.
Anyone know anything to help me out?
Click to expand...
Click to collapse
Hi, I found the solution time ago, sorry for answering to late, hope I can still be helpful.
Well, what I did is, I booted into TWRP, then I did a total format to the storage, after that I did something kind of crazy, I switched my storage format to anotherone and then I turned it back to how it was before (example: I was on fat32, I switched to exFAT and then I switched again to fat32) after doing that I tried to flash LinageOS and it allowed me, it booted and now my friend has Android Oreo on his Moto G1
Hope it works for you mate, those situations are very frustrating, good luck