Hi, I came here because I've tried to fix my phone but no hope. My situation si that I'm on a Loop in the booting process where the phone starts the booting process but crashes maybe on the bootloader. My system can see the Port COM 4 and I tried the Mobile upgrade program but after it detects the phone and I click "Update" button the phone goes into the loop maybe trying to get into Fastboot. Lastly, the download fails.
I have never hacked or made any modifications on an Android phone before so I'm a complete noob to this ADB tools and don't have a clue on how to use any tool to recover this phone.
I'm able to boot into "Download mode" and nothing else, maybe there's a combination for getting into the bootloader but I don't see anything about that in the many searches.
Any help is much appreciated.
you device is bricked and you try root install a custom rom or a bad upgrade
ravendepth said:
Hi, I came here because I've tried to fix my phone but no hope. My situation si that I'm on a Loop in the booting process where the phone starts the booting process but crashes maybe on the bootloader. My system can see the Port COM 4 and I tried the Mobile upgrade program but after it detects the phone and I click "Update" button the phone goes into the loop maybe trying to get into Fastboot. Lastly, the download fails.
I have never hacked or made any modifications on an Android phone before so I'm a complete noob to this ADB tools and don't have a clue on how to use any tool to recover this phone.
I'm able to boot into "Download mode" and nothing else, maybe there's a combination for getting into the bootloader but I don't see anything about that in the many searches.
Any help is much appreciated.
Click to expand...
Click to collapse
First boot into recovery and wipe cache and data.
If that fails try again. It fails again use the below method to restore your phone.
Go into download mode and using the ABD install your stock rom., Meaning your phones original version.
Your phones not bricked.
Stuck at Bootscreen (BootLoop)
Custo481 said:
First boot into recovery and wipe cache and data.
If that fails try again. It fails again use the below method to restore your phone.
Go into download mode and using the ABD install your stock rom., Meaning your phones original version.
Your phones not bricked.
Click to expand...
Click to collapse
Hi,
I tried to install RR on my Alcatel Idol 3 4.7 with using Shara & Firehorse according to this thread https://forum.xda-developers.com/idol-3/general/guide-unlock-flash-root-updated-alcatel-t3751845
everything went accordingly but TWRP never installed. I to boot into recovery and it booted android recovery instead of TWRP. So i tried again using Firehorse but my phone did not boot to download mode, so i cleared cache using the Android system recovery but then i received an error can't mount cache/recovery , so i tried to reset to factory data and received yet again other errors. Force-Restarting my phone ended up in a bootloop that i am not sure how to remove. Please help
Model: Alcatel One Touch Idol 3 6039 K
its-ian said:
Hi,
I tried to install RR on my Alcatel Idol 3 4.7 with using Shara & Firehorse according to this thread https://forum.xda-developers.com/idol-3/general/guide-unlock-flash-root-updated-alcatel-t3751845
everything went accordingly but TWRP never installed. I to boot into recovery and it booted android recovery instead of TWRP. So i tried again using Firehorse but my phone did not boot to download mode, so i cleared cache using the Android system recovery but then i received an error can't mount cache/recovery , so i tried to reset to factory data and received yet again other errors. Force-Restarting my phone ended up in a bootloop that i am not sure how to remove. Please help
Model: Alcatel One Touch Idol 3 6039 K
Click to expand...
Click to collapse
Hi, you may want to try a different TWRP recovery. Had the same problem. solved with TWRP 3.0.0 f2fs from Decker's MM TWRP backup. TWRP 3.1 also works with Sahara&Firehose.
Hope this helps.
Related
Hey guys,
I've been using this website as reference for years but never had an issue I hadn't already seen asked.
I've been looking for weeks for a solution to this and haven't found anything.
I tried to flash cm10.1 over my stock 4.1.2 and corrupted the system.
It was booting directly to AP Fastboot and showing an error about not calling the ROM properly.
I tried reflashing using RSD Light 5.7 but every time it tried to flash the system it said the phone returned failed.
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
ShiningRaven said:
Hey guys,
I've been using this website as reference for years but never had an issue I hadn't already seen asked.
I've been looking for weeks for a solution to this and haven't found anything.
I tried to flash cm10.1 over my stock 4.1.2 and corrupted the system.
It was booting directly to AP Fastboot and showing an error about not calling the ROM properly.
I tried reflashing using RSD Light 5.7 but every time it tried to flash the system it said the phone returned failed.
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
Click to expand...
Click to collapse
Format system via any of the custom recoveries before flashing your new ROM - this will wipe out any leftover problems completely & should let you start 100% fresh with a new ROM.
tzlot said:
Format system via any of the custom recoveries before flashing your new ROM - this will wipe out any leftover problems completely & should let you start 100% fresh with a new ROM.
Click to expand...
Click to collapse
I lost my root when I originally got stuck in fastboot. And I can't boot up the phone until I can get it fixed.
ShiningRaven said:
I lost my root when I originally got stuck in fastboot. And I can't boot up the phone until I can get it fixed.
Click to expand...
Click to collapse
Can you get back into fastboot now? If so
Use fastboot to flash a custom recovery (CWM, TWRP or OUDHS)
use the recovery to factory reset, wipe cache/dalvic, AND format system (sometimes in the advanced menu)
then flash rom of your choice.
If you can't get fastboot working you'll need smarter help than I can give you... but the format system step clears out all kinds of gremlins.
I can get into fast boot but I don't have an unlocked boot loader to flash anything custom.
ShiningRaven said:
I can get into fast boot but I don't have an unlocked boot loader to flash anything custom.[/QUOTE
If you can get into fastboot then you should be able to unlock b/l with this toolkit I used it and it worked for me you can also flash rom with it its in the orginial development thread
http://forum.xda-developers.com/showthread.php?t=2154995
Click to expand...
Click to collapse
ShiningRaven said:
So I upgraded RSD to v6.1 and tried again. This time the phone says it flashed properly but it freezes during the droid boot logo.
I've tried using the utility and it gives me the same results.
I can get into factory recovery and I've performed several hard resets. But the phone still freezes whenever it tries to load the system.
I'm using a Motorola Factory Cable on a high speed USB port.
Any ideas why I'm stuck in a soft brick that I can't flash out of?
Click to expand...
Click to collapse
Had the same problem after a fastboot via the utility. Try powering your phone down completely and leaving it off for about 5-10 min. This can be tricky with the hardware buttons so if you have access to TWRP that will help as it has a power off option. You might also try flashing again via the utility. I believe that's what I had to do, but the power down method is what a friend suggested based of his experience with the same exact problem you documented.
FIXED!!!
OK first I want to thank everybody who responded. I got tied up with work and kind of forgot about this project for a few days.
Repeated uses of the Utility and RSD both left me stuck with the phone freezing every time it tried to load the system into memory.
I had checked out the toolbox before but I didn't think I could do much from a locked bootloader.
After your suggestion jmcdonald I tried it again. It says my device isn't available to be unlocked so I tried downgrading back to ICS.
The toolbox says that it failed but it must have fixed something because the phone booted back up to android 4.1.2 stock!
So far I have bricked a lot of phones and learned a lot about ADB in the process of fixing them but I've never had one I was so certain was bricked permanently. But now it seems to be working fine, I'm scared to try rebooting in now.
Definatly going to unlock the bootloader pronto.
Thanks again jmcdonald!
Help Please!!! I need help reloading my Moto G 2013. I had android 5.0.1 running on it but I was not able to perform a device wipe. I read somewhere that encrypting and decrypting could be a workaround, so I decided to do that. Encrypting took less than 10 mins and the hone got stuck in a restart loop. So I tried flashing it with ADB and now I get the android man laying fat with the red triangle. I am guessing no more operating system.
I have tried making use of adb to load the rom but I keep getting the error no device found. I have tried every single process online. It is the google play edition xt1032 I have.
Thank you.
Can u reach recovery mode? Or bootloader
tdjeans said:
Help Please!!! I need help reloading my Moto G 2013. I had android 5.0.1 running on it but I was not able to perform a device wipe. I read somewhere that encrypting and decrypting could be a workaround, so I decided to do that. Encrypting took less than 10 mins and the hone got stuck in a restart loop. So I tried flashing it with ADB and now I get the android man laying fat with the red triangle. I am guessing no more operating system.
I have tried making use of adb to load the rom but I keep getting the error no device found. I have tried every single process online. It is the google play edition xt1032 I have.
Thank you.
Click to expand...
Click to collapse
That red triangle android robot is stock recovery. There should be a hardware key combination to wipe cache try searching on google. If all else fails then reboot to bootloader by using hardware key combination and perform a factory reset using fastboot.
Thank you for the help. I was able to get it fixed by flashing TWRP and the sideloading 4.4.4 on the phone. But I noticed the screen flickers for the first few minutes the phone is on. I also tried to update to 5.0.1 via OTA but after download, the phone restarted and instead of installing the 5.0.1, it booted to TWRP recovery. I want to know if I follow the instructions on http://forum.xda-developers.com/showthread.php?t=2542219, will I be able to remove the TWRP and have my stock recovery back and then be able to update via OTA. Also, I noticed I still cannot do a factory reset, the phone just restarts and everything remains the same.
skyguy126 said:
That red triangle android robot is stock recovery. There should be a hardware key combination to wipe cache try searching on google. If all else fails then reboot to bootloader by using hardware key combination and perform a factory reset using fastboot.
Click to expand...
Click to collapse
tdjeans said:
Thank you for the help. I was able to get it fixed by flashing TWRP and the sideloading 4.4.4 on the phone. But I noticed the screen flickers for the first few minutes the phone is on. I also tried to update to 5.0.1 via OTA but after download, the phone restarted and instead of installing the 5.0.1, it booted to TWRP recovery. I want to know if I follow the instructions on http://forum.xda-developers.com/showthread.php?t=2542219, will I be able to remove the TWRP and have my stock recovery back and then be able to update via OTA. Also, I noticed I still cannot do a factory reset, the phone just restarts and everything remains the same.
Click to expand...
Click to collapse
In order to do any factory resets or ota you must have stock recovery installed or else android cannot communicate properly with recovery for commands and such.
Ok. Thank you. I have reloaded to stock firmware and done an OTA update to 5.0.1.
skyguy126 said:
In order to do any factory resets or ota you must have stock recovery installed or else android cannot communicate properly with recovery for commands and such.
Click to expand...
Click to collapse
I finally was able to with TWRP.
instinctblade said:
Can u reach recovery mode? Or bootloader
Click to expand...
Click to collapse
Hello,
I just flashed the latest ROM for the S8+ (AQL5) and that went well.
Afterwards I tried to flash TWRP, but now the phone is stuck on the Samsung screen.
I then followed the guide I found here to use the BL file of AQF7 in Odin and spam the Start button so I managed to get into TWRP.
Question is, what do I do next? I restart the system it's the same problem all over again.
No one explains anywhere what to do in TWRP to save the phone.
Can I remove TWRP or somehow save the phone (without wiping my data)
Please help
Can you get to download mode? Then go to ODIN and redo your flashing of the OS and then TWRP. After the flash of TWRP, immediately boot into TWRP, and do Verity if you want that, and your root, if not already done. Clear Dalvik/cache and reboot to system.
It is not uncommon for folks, following TWRP flash, to get stuck in boot loop, unfortunately. Can take a little time, but you will get through it and finally to System.
But I thought all new firmware versions are incompatible with TWRP and cause this error.
I might try to install TWRP again if I flash the latest compatible version (I think it's the F7 one).
Does "Verify" in TWRP make that annoying "Your phone is not verified" message go away? The only option is to Reset phone when that thing comes up and I don't want to do that.
I managed to get out of that by reflashing the AQL5 version and just not installing TWPR.
Kind of scared to retry because everything goes wrong when I try to follow the guides on here or youtube
nkomp18 said:
But I thought all new firmware versions are incompatible with TWRP and cause this error.
I might try to install TWRP again if I flash the latest compatible version (I think it's the F7 one).
Does "Verify" in TWRP make that annoying "Your phone is not verified" message go away? The only option is to Reset phone when that thing comes up and I don't want to do that.
I managed to get out of that by reflashing the AQL5 version and just not installing TWPR.
Kind of scared to retry because everything goes wrong when I try to follow the guides on here or youtube
Click to expand...
Click to collapse
Would you please provide the info from my first post? and Exynos of Snapdragon?
JeffDC said:
Would you please provide the info from my first post? and Exynos of Snapdragon?
Click to expand...
Click to collapse
I have Exynos - model SM-G955F
Yes I can go to download mode but I won't do the things you ask because they're guaranteed to soft-brick the phone again and I have it working now
i have the same problem, followed this guide https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009 managed to get to TWRP no problems, once i reset the device though im stuck at the samung galaxy s8+ boot screen and can't get it off
any suggestions ? i did try to search but this old thread was the only relevant one i could find
stuck on boot screen after flashing twrp for magisk manager
i flashed magisk manager in twrp youtube.com/watch?v=r3R9kiBIx34 by this and now not booting to android . before i had this i reflashed miui 11 using official software and coulnt be sucess this time also please help me any one . my mobile is redmi 6 pro.:crying::crying::crying::crying:
So I was trying to root my oneplus 7 which had Android 10 but due to complexities I decided to downgrade it to 9.5 and flash twrp and root. Everything went well. But then I decided to upgrade again to Android 10 keeping the root. I flashed rom using twrp and then flashed twrp again using twrp. Then when I went in again to flash magisk after reboot, twrp showed me the partition error and it was showing me 0mb for internal storage. I searched up solution for it and found that changing partition to ext 4 and again to ext 2 might work...but it again showed me some partition error while doing so..(I think I erased system while doing this process by mistake) then all it was showing was "no os installed* then I slides to reboot and bang I m stuck on bootloader screen since then. No matter whatever I press (reboot, recovery,fastboot) I keep going back to bootloader screen. I m using Ubuntu and it's not not detecting my phone for adb push. I don't know what to do now. I m not able to access recovery and twrp. Please help
Go to the thread that uses msmtool
@Arun210222..... I don't know what to do now. I m not able to access recovery and twrp. Please help[/QUOTE]
__ (read carefully): https://www.reddit.com/r/oneplus/comments/c26pgp/oneplus_7_pro_suddenly_completely_dead/
https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
Congratulations... You have successfully soft bricked your OnePlus 7 like I did..
Don't worry...
Try the Msm tool to unbrick and it worked for me
Hi .
If you after flash twrp installer click on reboot to system , your phone be soft break., Because you must click on reboot to recovery and after it flash magisk.
How can in get out of this boot loop, any advice, answers, help appreciated?
As background my Lenovo Tab 4 10 plus (stock 7.1 rom) had a failed SD card so I replaced the card and factory reset and thought I would try TWRP, Linageos 17.1 with magisk and relevent gapps - this all worked fine other than a Skype issue. I then found an 18.1 rom and tried that and this is where it seems to have gone wrong I set it up in the same ways as the 17.1 rom but with Andriod 11 gapps to suit, did a factory reset and 30 seocnds in I got the boot loop.
To fix it I tried going back to the 17.1 rom set-up that had worked but this then boot looped even with a full recovery reset. I have gone back to the stock rom backup in TWRP again with a recovery reset same boot loop. I have even used the Lenovo recovery tool to EDL mode flash a newly downloaded stock rom and it's still boot looping. I can only think that the 18.1 andriod 11 rom changed something fundimental but I can't find what?
Further I have another problem, the EDL flash worked but it locked the bootloader, however as I can't get in to Andriod with the boot loops, I can't switch ADB mode on so I can't unlock the bootloader to get TWRP up again.
So is there a way to start ADB without access to develeoper settings maybe through fastboot or recovery which I can get in to? Unlock the bootloader without ADB? Does anyone know why after the 18.1 Andriod 11 based rom, I have this continous boot loop?
I have a tb-x704f wich was totally caught in a boot loop, but I manisched to get back to working stock.
I was running firmware s000056 when I flashed twrp without backing up anything. I thought I never would have to go back to nougat, but standby time on lineage os was just not good for me, as I only use my tablet maybe half an hour a day, and I had to charge several times a week nevertheless.
So I tried to get back to stock and awesome standby time.
It was not easy bootloop after bootloop.
Tried Lenovo rescue and smart assistant multiple times, factory reset before and after flash, without SD card inserted etc, but bootloop.
Tried flashing the rom downloaded from the rescue tool with qfil but same result.
I then tried flashing the files with miflash 2016.08.30.0 still the same rom as I thought it had to be s000056. Miflash stopped halfway with some kind of error.
I then downloaded a stock rom from lenovo-forums.ru http://lenovo-forums.ru/topic/24135-lenovo-tab4-a10-plus-proshivka-tb-x704f_s000037_170703_row_qfil/
from the link in the discussion in the bottom of the site.
I had twrp still so from there I got into terminal and wrote "reboot edl" to get into emergency download mode and then flashed away. I presume that I could just as well had gotten in to edl mode by pressing vol+ and vol- simultaneously and then connected to PC holding those to buttons pressed. When the tablet was finished it was off, so I started going to recovery and wipeed cache and did a factory reset. Then booted and instead of bootloop it showed the Lenovo screen with a progress bar underneath. I successfully booted and took a update and then i am back to stock s000056.
The rom I got from lenovo-forums.ru stated it was only for EU and wi-fi model only. I am in Denmark and my tablet is WiFi only.
I think chances for success is greater using miflash than other tools when recovering from bootloop, but then again I don't know. Maybe I could just have flashed the s000037 rom with qfil or maybe I was just lucky, who knows.
But this what worked for me.
I hope this can help someone as I could not with the help of god find any useful help regarding this problem.
pallep said:
I hope this can help someone as I could not with the help of god find any useful help regarding this problem.
Click to expand...
Click to collapse
Thanks kind man You helped finish my struggle!
The only thing I want to add is that the ROM from the original link is no longer available, so I found the correct ROM using Google from the original filename here https://firmware247.com/lenovo-tab4-a10-plus-tb-x704f-firmware/