Related
So, I'm in a bad spot with my Nexus S 4g. I had CWR installed on it and flashed a new rom yesterday to try it out, I had been running Deck's rom. I don't remember what the name of the rom was I flashed yesterday, but I didn't care for it so I was going to flash MIUI this morning. When i went to boot into recovery it brought me to the fastboot screen and said no boot or recovery img. From there I rebooted back to the rom I have loaded and tried to search around on the interwebs a little. I went into ROM Manager and tried to reflash the recovery, but that didn't work as upon reboot it did the same thing in returning to fastboot everytime. I did some more searching and I found info on an app called flash image that's in the app store that will flash kernels and recovery's. So I dl'd it and tried to reflash clockwork recovery from there. It gave me an error about not enough free space on the device. I went back to ROM Manager and set it to erase the current recovery before it flashed the new one in hopes that it would resolve the issue. So I reflashed the recovery again and went to boot to recovery. Now I can't get past the bootloader/fastboot screen at all. It won't boot to android, it won't boot to recovery. My pc won't recognize the phone to allow me to install the drivers for adb...I'm at a loss.
Any help would be greatly appreciated as I have no idea what to do next.
Thanks in advance...
Did you try to flash recovery through the computer from the cmd window, Because ROM manager doesn't flash recovery properly sometimes.
Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.
angrygamer1023 said:
Backstory: I tried to load Cyanogenmod on my phone; but first I had to load TWRP recovery in order to get to load it. This is where the issue came; I decided to go the easy route and attempted to install it through Flashify (an app on the Google Play store); upon restarting my phone; it was bricked. I went into EVERYTHING, when I tried to go into recovery it would just send me through the bootloop and then send me to AP Fastboot.
Confused, I called Motorola; and was notified and Flashify had removed my prevoius recovery and failed to but TWRP resulting in this.
Issue: So what I did is I got the CWM recovery specific for my phone (XT926) and went into ADB fastboot and typed "fastboot flash cwm.img", from my ADB folder of course. Then when I booted into recovery, nothing happened; it would just send me through the bootloop again. Please help.
Click to expand...
Click to collapse
Try another recovery / another version. Did the trick for me and you have nothing to lose
I have 2 XT925s. I bricked one to the point that I could boot to fastboot but could not even get into stock recovery. I was running stock 4.4.2.
I did the following.
I got the DROID_RAZR_HD_Utility_1.41. I used the TWRP 2.7.1.0 in that utility specifically for XT925.
I used fastboot to manually flash TWRP into the recovery partition.
DO NOT reboot past boot menu. Right after flashing, boot into recovery. That should give you TWRP.
I used TWRP to Install CM11 snapshot. I had to manually flash into the modem partition, the modem file also obtained from the above utility. You will need to flash in gapps for 4.4.2.
That recovered the bricked phone.
Of note, I was able to flash TWRP in the other phone. Backed it up. Transfered the backed up OEM ROM into the phone running CM. And get it to run stock ROM.
I now have one running CM11, and one running stock 4.4.2. I'm just comparing battery life. I've noticed CM11 has a smaller memory footprint than stock 4.4.2.
Cheers
did not work for me anywhere to be found stock 4.4.2 recovery img for 926?
When I attempt to go to Cofface's Baidu page to download his 5.1 TWRP version, I get a message saying the content is no longer available. Specifically, Google Translate shows "Lol, you visit the page does not exist." Does anyone happen to have a copy they're willing to share? Or is there some issue with the 5.1 version that would suggest that I shouldn't use it? If I shouldn't ask for some reason, I apologize. Otherwise, thanks in advance.
https://yadi.sk/d/5YI63uiAhz5UD/Recovery/TWRP
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
wpennhokie said:
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
Click to expand...
Click to collapse
Did you unlock your bootloader?
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
wpennhokie said:
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
Click to expand...
Click to collapse
Thats the same problem I have. I used the other twrp recovery https://mega.nz/#!l5kmUByA!41uExNuasZRgLBML9TTSp8myX-_F6UgQZuE2F2BRZUE
This one worked with out boot loops for me. you can give it a shot.
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
I had that exact same problem twice on Kangvip B015. When I would restart it would all of a sudden automatically boot into TWRP every time and never boot into the OS. When that happens, in TWRP make a backup, then Fastboot flash the stock ROM (system, boot, cust, recovery, user data etc) then when it boots do a factory data reset, then reroot, flash TWRP and restore from the backup you made. The OS will boot from your backup. I dunno why this happens, maybe it has something to do with with Kernel.
I've tried it a couple of times now, and I'm still not getting it to boot past TWRP once I flash the recovery. It was able to take a backup with TWRP, but when I restored it, I still had to restore the stock recovery before I could boot into the system. At worst, at this point, I can always flash TWRP, take a backup, flash the stock recovery, and then have my system back. It's a few extra steps, but I think I'll do this until I find a custom ROM that I like. I greatly appreciate the help so far.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
Reflash the stock b106 recovery and wipe user data and cache, Then reflash twrp recovery and restore your backup. It should boot then.
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
wpennhokie said:
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
Click to expand...
Click to collapse
By any chance, did you delete anything from the Cust Folder at any point?
ajsmsg78 said:
By any chance, did you delete anything from the Cust Folder at any point?
Click to expand...
Click to collapse
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
wpennhokie said:
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
Click to expand...
Click to collapse
I don't think so. It's weird how some of us have different problems than others. I've had zero issues with TWRP but lately my screen has been going crazy. My touches don't work, things jump it's like my digitizer is messed up but when I restart everything is fine again. So I reloaded everything and the problem went away. I guess I debloated too much last time.
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
theoden144 said:
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
Click to expand...
Click to collapse
To solve this, you could get phone into Fastboot and flash Dottat's RUU for the M8 - he made several versions.
For sure, add HTC_Fastboot.exe to your ADB folder and use it, NOT regular fastboot.
It will overwrite your previous recovery with stock and fix your phone. Then later, you could flash TWRP 2.8.7 thru Fastboot.
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
cntryby429 said:
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
Click to expand...
Click to collapse
I would flash firmware or ruu, if indeed he flashed recovery to wrong partition, that partition needs the correct one which firmware wlil do, and ruu will 100% do.
Personally I'd run ruu, go to stock recovery and run a factory reset.
theoden144 said:
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
Click to expand...
Click to collapse
Gotta use ADB and HTC_Fastboot.exe
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
theoden144 said:
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
Click to expand...
Click to collapse
Twrp manager is not a safe way to flash recovery because they aren't flashing by block name yet. They are still hard-coded to block number. The partitions have changed during ota already...so the app does hose things up a bit.
Sent from my Nexus 6 using Tapatalk
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Click to expand...
Click to collapse
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
twrp not boot after successfully flash in this rom
Sanarise said:
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
Click to expand...
Click to collapse
flash latest twrp download from github, install twrpbuilder img twrp ,it boot fine and you will copy your data to pc and then install any other twrp img which u want , dont wipe anything from phone before phone boot.flash only original twrp builder 3.2.3.1 official,it boot only on latest updates.
Why nobody use orangefox?
is your issue solve or not tell,
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
first click on extract a fastboot rom and copy boot system and vender file with flash.all bat file and make a new folder then click on flash.bat save user data file to flash these images
or you can do this manually
fastboot flash system system.img
fastboot flash vender vender.img
fastboot flash boot boot.img
then reboot device to fastboot again
now flash latest official twrp builder 3.2.3.1 img twrp and take all your data backup,
in fastboot flash latest miui do not downgrade direct otherwise you lost your data,
after this if you sucess then you can flash your old rom which is running before issue of boot loop of redmi logo
it will deincrypt your data safely and then root device and boot normally, if you lost anything then contact me with mail or whatsapp i will help you,7009197673 india
and this twrp work on all version from chines to global beta stable and indian stable
joke19 said:
Why nobody use orangefox?
Click to expand...
Click to collapse
In the end, I did try orangefox, and it might have been part of why it worked.
However, the crDroid installation instructions specifically mentions using Peter's TWRP, so I initially used that one.
anmoltinder said:
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
Click to expand...
Click to collapse
Thank you for the effort you put into typing up a guide to help me, but I ended up fixing my own problem.
I was able to use fastboot to flash on a better TWRP release, and then get the rom to install properly by installing fcrypt-disabler just after it.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Click to expand...
Click to collapse
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Fcsubxrhi said:
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Click to expand...
Click to collapse
If you can access fastboot, then flash TWRP.... Enter recovery, wipe your system partitions and then flash the Stock MIUI ROM or use the MiFlash tool. Make sure you aren't flashing an older version of the ROM than the onle already installed.
CongestedHangman said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
I have the same problem that stated after installing the update for derpfest and I can boot into twrp. Any solution for me?