I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
theoden144 said:
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
Click to expand...
Click to collapse
To solve this, you could get phone into Fastboot and flash Dottat's RUU for the M8 - he made several versions.
For sure, add HTC_Fastboot.exe to your ADB folder and use it, NOT regular fastboot.
It will overwrite your previous recovery with stock and fix your phone. Then later, you could flash TWRP 2.8.7 thru Fastboot.
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
cntryby429 said:
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
Click to expand...
Click to collapse
I would flash firmware or ruu, if indeed he flashed recovery to wrong partition, that partition needs the correct one which firmware wlil do, and ruu will 100% do.
Personally I'd run ruu, go to stock recovery and run a factory reset.
theoden144 said:
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
Click to expand...
Click to collapse
Gotta use ADB and HTC_Fastboot.exe
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
theoden144 said:
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
Click to expand...
Click to collapse
Twrp manager is not a safe way to flash recovery because they aren't flashing by block name yet. They are still hard-coded to block number. The partitions have changed during ota already...so the app does hose things up a bit.
Sent from my Nexus 6 using Tapatalk
Related
not sure if this is what everyone is already doing, but I was trying to figure out how it might work
stock ota 2.3.1 os
fastboot oem unlock
flashed clockworkmod recovery
boot into recovery nandroid backup stock non-rooted os (just in case )
flash su-2.3.6.1....zip
nandroid backup again
take the boot.img from this nandroid backup and fastboot flash boot
onicrom said:
not sure if this is what everyone is already doing, but I was trying to figure out how it might work
stock ota 2.3.1 os
fastboot oem unlock
flashed clockworkmod recovery
boot into recovery nandroid backup stock non-rooted os (just in case )
flash su-2.3.6.1....zip
nandroid backup again
take the boot.img from this nandroid backup and fastboot flash boot
Click to expand...
Click to collapse
No.
10chars
fastboot oem unlock
flash cwm recovery
nandroid backup
mount /system
flash the su-2361 zip
boot up
rename/delete /etc/recovery.sh (or whatever the exact file is)
download rom manager, flash latest cwm (as of right now it's 3.0.0.5)
reboot to recovery to make sure cwm loads properly and updated.
done.
nxt said:
download rom manager, flash latest cwm (as of right now it's 3.0.0.5)
Click to expand...
Click to collapse
Caution with the 3.0.0.5 latest CWM. I can't get into CWM recovery with that one; I had to downgrade back to 3.0.0.0. The phone just stalls at the Google screen on boot up with it.
Another person's reported the issue in another thread here. I emailed koush, but no response yet.
@nxt, you've tested 3.0.0.5 and it works as expected?
distortedloop said:
Caution with the 3.0.0.5 latest CWM. I can't get into CWM recovery with that one; I had to downgrade back to 3.0.0.0. The phone just stalls at the Google screen on boot up with it.
Another person's reported the issue in another thread here. I emailed koush, but no response yet.
@nxt, you've tested 3.0.0.5 and it works as expected?
Click to expand...
Click to collapse
Not nxt, but I haven't had any issues with 3.0.0.5. Flashing, restoring, or anything at all.
unremarked said:
Not nxt, but I haven't had any issues with 3.0.0.5. Flashing, restoring, or anything at all.
Click to expand...
Click to collapse
Interesting. I wonder what the quirk is on mine and the other guy's. I haven't tried flashing it from fastboot, but selecting reboot to recovery from within ROM Mgr will not load recovery, it just hangs. No issues with 3.0.0.0.
distortedloop said:
Interesting. I wonder what the quirk is on mine and the other guy's. I haven't tried flashing it from fastboot, but selecting reboot to recovery from within ROM Mgr will not load recovery, it just hangs. No issues with 3.0.0.0.
Click to expand...
Click to collapse
Works fine for me normally. I personally don't use rom Manager to do anything though. I manually reboot into recovery and do recovery stuff. I have not tried selecting reboot to recovery via ROM Manager. That might be the issue.
I used Hasoon2000's HTC All-In-One Kit to root my phone. That all worked.
The issue came when i flashed a new kernel. I placed the boot.img from King Kang's new ROM (http://forum.xda-developers.com/showthread.php?t=1959099)
Anyway, When i boot I get the HTC, quietly brilliant logo, and this in red letters "This build is for development purposes only. Do not distrubute... "
i can boot into recovery (pwr+ vol down)
And i get the ***TAMPERED*** AND ***unlocked*** tags at the top
I don't know where to go from here...
Thanks for the help.
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
ccamwilkins said:
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
Click to expand...
Click to collapse
You mentioned in your original post that you could boot into recovery, so is that not working now? Factory reset might've fubared the recovery piece, so you could do one of two things:
1) download the original RUU version for your phone, relock your phone, and flash the RUU and start over.
2) try reinstalling TWRP.
This whole thing sounds like trying to install a kernel or fastboot flash a boot.img without SuperSU correctly installed. This is what happened to me when I first unlocked my phone and tried to fastboot flash the CM10 boot.img after failing the flash from recovery twice. Without that super-user permission, bad things tend to happen. If you decide to continue on with reinstalling TWRP, make sure SuperSU.zip is flashed successfully from
TWRP, then try your rom/kernel combination again (or even a different combination if you're apprehensive).
BEWARE: sometimes partially flashing these things can corrupt your sd card. I had to reflash the original RUU to fix my phone BEFORE I rerooted and flashed a rom/kernel.
Have you fastbooted a SU to your phone after you rooted and unlocked? I'd imagine you did if you followed the toolkit.. So your on 2.20... Just download cleanrom 5.1 on your computer. Mount sdcard via recovery and drag cleanrom onto phone. Flash entire rom in recovery. I bet it works
Once your on a stable rom, download king kang from your phone. Download flashgui. Open flashgui app, navigate to king kang and let it find the boot img and flash it for you.. Once successful, immediately boot into recovery and flash entire rom through twrp.
Success
Sent from my One X using Tapatalk 2
Hi guys, I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed.. Thanks in advance!
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
beekay201 said:
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
Click to expand...
Click to collapse
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
carlese said:
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
Click to expand...
Click to collapse
do you finde fix
slavisa037 said:
do you finde fix
Click to expand...
Click to collapse
Downloaded twrp again and used flashify..
carlese said:
Downloaded twrp again and used flashify..
Click to expand...
Click to collapse
This is not really a fix, since to use Flashify one needs to be rooted already.
What I did to work around this was reflash LMY48M. After reflashing that, fastboot correctly boots/flashes twrp.
I've read that the issue arises when trying to boot and/or flash twrp with MRA56K installed, AND the device is connected to USB.
Ok, i got some of problems here, i tryied to root my Nexus 5 with other Android 6 version, it was the first one launched after development version. Now i have MRA58K version.
Problem 1 : I have no stock recovery, i first rooted original version of Marshmallow with CWM and i soft bricked, so no backup, no factory images. Installed MRA58K and there is no stock recovery, thanks god i can use bootloader. I can install TWRP, but i want to install the old recovery, Tell me how to do it.
Problem 2: Actual version of Marshmallow ask me to install a patch, but when installing i got stuck in TWRP, it cant install it (yes, android was rooted, but i installed twrp before root, and the update were before it.)
Thanks.
You can flash a stock ROM using the flash-all file in a command prompt. This will install stock ROM with stock recovery. Make sure the phone has an unlocked bootloader and you should be fine.
Official OTA updates cannot be installed with a custom recovery.
I tryied 3 times to install OS with flash-all. All the problems start after i installed CWM and try to root the phone, but after that, i used a stock rom image that was different build than actually one.
I`m not sure yet who`s fault is.
Any ideas?
I don't recommend using CWM, only TWRP.
After you flash TWRP always boot into it, and since you're flashing a custom recovery I'm going to assume you don't care about OTA's, swipe to allow system to be mounted. TWRP will automatically patch the system to survive android trying to overwrite it. Reboot into TWRP a second time to be safe. TWRP should stick from now on until you flash over it or restore stock system partition.
Yes, now i have TWRP as recovery, but i want to replace it with stock recovery.
Problem is, when i upload stock recovery and try to boot in recovery mode, i got the green dead android with red triangle.
But after TWRP uploading and booting in recovery mode, TWRP is there..
I really don`t know what`s wrong.
Flash stock recovery, select recovery from the fastboot menu, hold the power button and press volume up button.
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
I would also suggest starting over with the RUU for your model. Once you get TWRP back however you may want to take a look at this thread http://forum.xda-developers.com/one-a9/development/rom-a9-base-roms-recovery-flashable-t3282335 for some pre-rooted stock ROMS. I'm running the Sprint one with Xposed/GravityBox right now and it's great.
CSnowRules said:
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
Click to expand...
Click to collapse
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Did you try re-installing drivers and flashing new recovery with fastboot?
PHYN1X said:
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Click to expand...
Click to collapse
I believe SuperSU 2.46 was your problem and that a RUU is not required to fix this. The older SuperSU broke the dm-verity for your system partition, which is enforced by your kernel. Flash SuperSU 2.76 (the latest stable release). This will automatically patch your boot partition. You will not be able to take an OTA until flashing the stock system image, though.
You just need to fastboot flash TWRP back to your device, first (fastboot flash recovery twrp.img) just like the first time from download mode--not the bootloader. Unlike ADB, your phone doesn't need to trust your computer.
If fastboot doesn't work, check what creusset said.
creusset said:
Did you try re-installing drivers and flashing new recovery with fastboot?
Click to expand...
Click to collapse
Hello everyone.
I had a problem flashing TWRP on my Google Nexus 5, or better the problem comes when I try to enter the recovery.
I followed this pattern from stock android 6.0.1 with august security patch:
1) unlock bootloader
2) downloaded lastest TWRP (3.0.2 hammerhead) recovery from the official website
3) flash it with "fastboot flash recovery recovery.img"
Until this point everything's alright but then when I unplug my phone from the laptop and click on enter recovery something strange happens.
I can see the TWRP boot image but as soon as I go in I see tons of errors related to "cannot mount ..." and some partitions name like /data, /cache, and then starts the bootloop without let me any chance to do something. Sorry but I can't see every error beacuse this happen too fast.
Any idea on what is going on?
I've tried the TWRP 3.0.1 but is the same shuold I go down or maybe I have to change it beacuse of compatibily issues with the monthly patches?
Thank you for your help, I hope I explained my problem clearly.
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
audit13 said:
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
Click to expand...
Click to collapse
No I've just unlocked and then tryied to flash the recovery without wipe.
But data is already wiped by unlocking the bootloader isn't it?
Anyway thanks for your reply as soon as I can I'll try what you have written.
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
audit13 said:
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
Click to expand...
Click to collapse
Thank you so much for telling me to flash the 2.8.7, i've choosen the 2.8.7.1 without success (it did't flash i don't know why) but then after another wipe all I've flashed the 2.8.7.0 and it seems to work.
The only thing I would like to ask now is: I'm going to flash superSU and elementalX over stock AOSP (I don't want custom ROM for now) and can this recovery cause problem because of it is not the last update?
Thank you again for the answer!
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
TWRP Restore problem
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
I have rebooted...deleted all my music... (I think that the issue may come from insufficient disk space) and relaunched...
Will see...
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
hunter-dz said:
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
Click to expand...
Click to collapse
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
kevtuning said:
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
Click to expand...
Click to collapse
Download thé nrt and i Will teach how to root ur n5
And type in Google nrt n5 xda
audit13 said:
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
Click to expand...
Click to collapse
Now I can confirm that I was able to flash the lastest SuperSU and ElementalX with TWRP 2.8.7.0 without any problem, so thank you again for your help.
kevtuning said:
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
Click to expand...
Click to collapse
Hi, I've have successfully installed the last OTA update but not with zip file, instead I downloaded the factory image and flashed with fastboot boot.img and system.img (also vendor.img if you have one) then rebooted into TWRP and installed the lastest ElementalX and SuperSU.
I'm not sure but I think that factory image zip file are not installable via recovery but only with the flash-all that comes with them. This script use fastboot to flash everything you need of the factory image
You can find this procedure on the ElementalX website, here is the link hope it can help out: http://elementalx.org/how-to-install-android-monthly-security-updates/
Finally... I installed CM13 and ElementalX... in some minutes ...
I suppose the the problem was in my zip file...