I used Hasoon2000's HTC All-In-One Kit to root my phone. That all worked.
The issue came when i flashed a new kernel. I placed the boot.img from King Kang's new ROM (http://forum.xda-developers.com/showthread.php?t=1959099)
Anyway, When i boot I get the HTC, quietly brilliant logo, and this in red letters "This build is for development purposes only. Do not distrubute... "
i can boot into recovery (pwr+ vol down)
And i get the ***TAMPERED*** AND ***unlocked*** tags at the top
I don't know where to go from here...
Thanks for the help.
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
ccamwilkins said:
Also, whenever i boot into recovery or factory reset, neither succeed.
This was probably known info, just wanted to add it.
Click to expand...
Click to collapse
You mentioned in your original post that you could boot into recovery, so is that not working now? Factory reset might've fubared the recovery piece, so you could do one of two things:
1) download the original RUU version for your phone, relock your phone, and flash the RUU and start over.
2) try reinstalling TWRP.
This whole thing sounds like trying to install a kernel or fastboot flash a boot.img without SuperSU correctly installed. This is what happened to me when I first unlocked my phone and tried to fastboot flash the CM10 boot.img after failing the flash from recovery twice. Without that super-user permission, bad things tend to happen. If you decide to continue on with reinstalling TWRP, make sure SuperSU.zip is flashed successfully from
TWRP, then try your rom/kernel combination again (or even a different combination if you're apprehensive).
BEWARE: sometimes partially flashing these things can corrupt your sd card. I had to reflash the original RUU to fix my phone BEFORE I rerooted and flashed a rom/kernel.
Have you fastbooted a SU to your phone after you rooted and unlocked? I'd imagine you did if you followed the toolkit.. So your on 2.20... Just download cleanrom 5.1 on your computer. Mount sdcard via recovery and drag cleanrom onto phone. Flash entire rom in recovery. I bet it works
Once your on a stable rom, download king kang from your phone. Download flashgui. Open flashgui app, navigate to king kang and let it find the boot img and flash it for you.. Once successful, immediately boot into recovery and flash entire rom through twrp.
Success
Sent from my One X using Tapatalk 2
Related
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
ackerchez said:
Hey All,
I just got my One XL and I was so excited by the root on 2.20 that I decided to try and flash the custom rom of AOKP on onto it.
After rooting the phone, I did the following:
Flashed TWRP 2.3.1.0 - success
Then I went and saw the thread about the AOKP rom and followed instructions. On that thread, it states that you must flash the boot.img before doing this through fastboot if you are coming forom 2.20 firmware, so I did that. Then I saw that it said on the thread "do not complain about bootlooping if you flashed a custom KERNEL or did not manually flash the stock KERNEL via fastboot" As this was the first custom rom I had attemped with this phone I assumed that I had the stock KERNEL already installed, so I did not flash any kind of kernel.
As soon as I flashed the boot.img from AOKP, I saw that there was red writing on the bootloader about this being for development use only and I noticed that the phone would get past the bootloader to a black screen and then would reboot (boot loop).
I thought that the issue here was that I did not flash the kernel so I went and downloaded the rohan.kernel and flashed that. HOWEVER, I did not realize that I was meant to use recovery to do that and I pushed the boot.img from within the kernel via fastboot instead of using recovery to flash the new kernel (not sure if that matters all that much, but I think that from now on all rom work will be done in the day time after sleeping a little more).
After doing that I see no change in the performance of the phone (it is still boot looping). I am unsure of what to do now. I managed to push the KERNEL zip file and the ROM zip file to the phone via adb but when I try and install them via TWRP I am getting an error because the phone reports that it is unable to mount /sdcard/.
Can one of the far more knowlegable gurus here point me in the right direction? I have wiped the cache and davlik cache numerous times but that has not helped. Should I use TWRP to wipe the system? How can I get the phone back to a place where I can install the new rom?
Thanks!!
Click to expand...
Click to collapse
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
thejosh86 said:
First of all I think if you're on 2.2 fw I don't think you can flash kernels through TWRP - I think it has to be through fastboot, I don't know first hand as I'm still on an earlier fw version.
Secondly if you can get into recovery you can flash another rom.
Go to Mount > Mount USB Storage with your phone connected via USB, it should mount as a drive otherwise windows asks you to format format the drive if this happens chances are may have wiped it in bootloader with factory reset or clear storage in either case just format the drive.
You can then drag and drop another rom onto the phone and flash that - remember to extract the boot.img from the rom and flash via fastboot so it will boot.
Goodluck
Click to expand...
Click to collapse
Hey!
Thanks a ton for your reply! I managed to get the phone to install a new ROM (AOKP V5) and it seems to boot up. Now when I get into that rom, I see all kinds of things crashing on me. The "Settings" app crashes, the keyboard crashes..any idea?
Did you wipe system, factory reset, davlik and cache from within TWRP before flashing?
Try that otherwise if you're still running into issues post in the thread.
You flashed the 11/10 JB gapps?
Sent from my Nexus 7 using xda premium
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
ackerchez said:
ok, i got the phone back up now and have been able to flash stuff properly.
I am working on an issue where after flashing a new rom (AOKP v4) and then a new kernel right after (rohan.kernel V2) the rom seems to hang on the loading splash screen. Has anyone else had this happen? Know how to solve it?
Click to expand...
Click to collapse
Did u wipe everything? (davlik, cache)
Sent from my HTC One XL using xda premium
Unlocked and rooted ATT HTC One X and flashed pa_evita-2.54-09NOV2012-210217 ROM.
Boot up as far as an Android character with the lettering Paranoid Android 2.+ and then freezes there.
Any suggestions?? If nothing else, how do I get back to stock ROM?
Noob rldieb
rldieb said:
Unlocked and rooted ATT HTC One X and flashed pa_evita-2.54-09NOV2012-210217 ROM.
Boot up as far as an Android character with the lettering Paranoid Android 2.+ and then freezes there.
Any suggestions?? If nothing else, how do I get back to stock ROM?
Noob rldieb
Click to expand...
Click to collapse
1. What recovery are you using?
2. Did you wipe cache/dalvik-cache, factory reset?
In order to get back to a stock ROM, you will need to boot into recovery, then mount your usb storage. Put the rom on your sd card and then unmount. To be safe, wipe the cache and dalvic cache, then flash the stock rom.
What hboot are you on?
You may have flash boot.img first if you are on hboot 1.14
I think he just didn't full wipe
That's just wrong!
Sent from my Nexus 7 using Tapatalk 2
I'm having the same issue. I'm trying to flash this same rom on a device rooted on 2.20. I think my issue has something to do with flashing the boot.img. I have tried to flash using hasoon's toolkit, which doesnt seem to work, i have extracted the zip and placed the boot.img in the kernel folder, and when the command prompt tries to flash it, it says error. I have also tried flashing the kernel from the phone directly using the flash flash image gui app, and it says flash is successful, but when it prompts to boot into recovery, the command doesnt work from my phone so i have to boot into recovery manually.
can anyone give a solid link or tutorial on how to successfully flash the boot img onto my device, every link I have read uses windows cmd prompt, which when i try to replicate, it never works.. So, for now I flashed back to viper rom, since it has its own installer. It would be so nice if all these other roms were able to install like that.
thanks in advance for the help
threetwentyfizzle said:
I'm having the same issue. I'm trying to flash this same rom on a device rooted on 2.20. I think my issue has something to do with flashing the boot.img. I have tried to flash using hasoon's toolkit, which doesnt seem to work, i have extracted the zip and placed the boot.img in the kernel folder, and when the command prompt tries to flash it, it says error. I have also tried flashing the kernel from the phone directly using the flash flash image gui app, and it says flash is successful, but when it prompts to boot into recovery, the command doesnt work from my phone so i have to boot into recovery manually.
can anyone give a solid link or tutorial on how to successfully flash the boot img onto my device, every link I have read uses windows cmd prompt, which when i try to replicate, it never works.. So, for now I flashed back to viper rom, since it has its own installer. It would be so nice if all these other roms were able to install like that.
thanks in advance for the help
Click to expand...
Click to collapse
I do have a solution! Download Flash Image GUI from the market (it's $1.99) and it will do the process for you, no commands needed! The app is also available via XDA for free, do a search and download it.
Hey guys, thanks for all the previous help i've gotten from here.
Here's the deal, I have a 2.2, rooted and unlocked ATT HOXL. I flashed the SU binary and have root and everything. I'm on the stock 2.2 ROM.
Do you need to install a different ROM before flashing the kernel? If so, then I will wait until this download finished for CleanROM. If not, then continue below..
I flashed the boot.img for ElementalX-3.1 in Fastboot (Fastboot 1.14), rebooted phone like normal, phone came up, kernel is showing in the information page on the phone, it is running at 1.7ghz. That's fine, but then I realized I had never gotten any installer or anything. So, I went into recovery to flash the whole ZIP file. Go to reboot the phone and it hangs on boot after the first HTC logo.
I tried flashing the boot.img, then rebooting to recovery, and flashing the ZIP, then clearing the cache, and then rebooting. Still hangs. I am able to go into recovery and restore a backup if I need to, so at least my phone isn't dead, but I want to do this.
I also tried installing the ZIP, then rebooting into Fastboot and flashing the img, and then booting the phone up normal.
So as it sits now, I have the Kernel installed from ONLY the boot.img, I did not run the ZIP.
Do I need to flash a stock kernel in Fastboot, and then try just flashing the whole thing in TWRP? From what I have read, the steps for flashing the kernel on 1.14 is:
1. Flash boot.img
2. Reboot to recovery
3. Flash ZIP
4. Clear cache
5. Reboot phone as normal
Are those the correct steps? Do I need to flash a stock kernel before trying this again, or can I just start from square one, as if I were using a stock kernel?
Thanks
You can't flash kernels from recovery on the higher hboot. You have to fastboot them or use the flash image GUI app.
Some ROMs/kernels use a script that works around that, but not all do.
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
theoden144 said:
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
Click to expand...
Click to collapse
To solve this, you could get phone into Fastboot and flash Dottat's RUU for the M8 - he made several versions.
For sure, add HTC_Fastboot.exe to your ADB folder and use it, NOT regular fastboot.
It will overwrite your previous recovery with stock and fix your phone. Then later, you could flash TWRP 2.8.7 thru Fastboot.
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
cntryby429 said:
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
Click to expand...
Click to collapse
I would flash firmware or ruu, if indeed he flashed recovery to wrong partition, that partition needs the correct one which firmware wlil do, and ruu will 100% do.
Personally I'd run ruu, go to stock recovery and run a factory reset.
theoden144 said:
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
Click to expand...
Click to collapse
Gotta use ADB and HTC_Fastboot.exe
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
theoden144 said:
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
Click to expand...
Click to collapse
Twrp manager is not a safe way to flash recovery because they aren't flashing by block name yet. They are still hard-coded to block number. The partitions have changed during ota already...so the app does hose things up a bit.
Sent from my Nexus 6 using Tapatalk