When I attempt to go to Cofface's Baidu page to download his 5.1 TWRP version, I get a message saying the content is no longer available. Specifically, Google Translate shows "Lol, you visit the page does not exist." Does anyone happen to have a copy they're willing to share? Or is there some issue with the 5.1 version that would suggest that I shouldn't use it? If I shouldn't ask for some reason, I apologize. Otherwise, thanks in advance.
https://yadi.sk/d/5YI63uiAhz5UD/Recovery/TWRP
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
wpennhokie said:
Thanks very much for the link! I think I must have some deeper problems, as every time I flash this recovery (and another version I found in my old downloads), I just get stuck in a boot loop. I was able to use TWRP when I was on B015, but for some reason, I can't get it to work on B106. I'm using:
fastboot flash recovery c:\android\twrp_cn.img
However, like I said I just get stuck in a boot loop. When I flash the stock recovery, everything starts working again.
Click to expand...
Click to collapse
Did you unlock your bootloader?
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
wpennhokie said:
Yes, it is. I was able to run TWRP when I was on B015. The phone is rooted, so I've just been using Titanium Backup to back everything up before I wipe the phone, but it would be nice to take a Nandroid backup instead of having to reinstall from TB.
Click to expand...
Click to collapse
Thats the same problem I have. I used the other twrp recovery https://mega.nz/#!l5kmUByA!41uExNuasZRgLBML9TTSp8myX-_F6UgQZuE2F2BRZUE
This one worked with out boot loops for me. you can give it a shot.
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
I had that exact same problem twice on Kangvip B015. When I would restart it would all of a sudden automatically boot into TWRP every time and never boot into the OS. When that happens, in TWRP make a backup, then Fastboot flash the stock ROM (system, boot, cust, recovery, user data etc) then when it boots do a factory data reset, then reroot, flash TWRP and restore from the backup you made. The OS will boot from your backup. I dunno why this happens, maybe it has something to do with with Kernel.
I've tried it a couple of times now, and I'm still not getting it to boot past TWRP once I flash the recovery. It was able to take a backup with TWRP, but when I restored it, I still had to restore the stock recovery before I could boot into the system. At worst, at this point, I can always flash TWRP, take a backup, flash the stock recovery, and then have my system back. It's a few extra steps, but I think I'll do this until I find a custom ROM that I like. I greatly appreciate the help so far.
wpennhokie said:
Thanks for the link! I can now get into TWRP. However (sadly), after I leave TWRP, it reboots directly back to TWRP. I've tried rebooting from TWRP into the system and shutting down, but each time, it just goes straight back to TWRP. I was able to boot into fastboot, so I reflashed the boot.img file, but it still goes straight to TWRP. I actually have had this issue before, and I wasn't ever able to figure it out. Any help would be greatly appreciated, as usual.
Click to expand...
Click to collapse
Reflash the stock b106 recovery and wipe user data and cache, Then reflash twrp recovery and restore your backup. It should boot then.
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
wpennhokie said:
To follow up, I tried using the updated version of TWRP that you (mtyler7807) posted in the development thread and following the instructions above. I can flash the recovery, boot into it, and take a backup. After that, as long as I boot into the system, I'm fine. However, once I boot into recovery for the first time after that initial backup, it just reboots into TWRP every time. So, right now, I took a backup a day or so ago, and I've just avoided going back in to TWRP again. I have another X2 on the way (a 32GB version), so I'm hoping that I'll have better luck with that one.
Click to expand...
Click to collapse
By any chance, did you delete anything from the Cust Folder at any point?
ajsmsg78 said:
By any chance, did you delete anything from the Cust Folder at any point?
Click to expand...
Click to collapse
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
wpennhokie said:
As far as I know, I have not. I did do a complete wipe of everything (except the SD card) at one point using TWRP, but I've always restored the system using the stock system.img file. Right now, the Cust folder is showing five folders, with several more folders/files underneath. Is there a particular file I should be checking for?
Click to expand...
Click to collapse
I don't think so. It's weird how some of us have different problems than others. I've had zero issues with TWRP but lately my screen has been going crazy. My touches don't work, things jump it's like my digitizer is messed up but when I restart everything is fine again. So I reloaded everything and the problem went away. I guess I debloated too much last time.
Related
First off, let me start out by saying that the Infinity is running on what is possibly the worst software ever designed. Props, Asus. You've made my life hell until the last second.
So, here's my problem. The tablet was working fine 24 hours ago. I turned it off last night, turned it on this morning, working great on CROMi-Xeno (which is awesome, it actually makes the tablet bearable.) and played on it for a while before turning off again. While playing it, I noticed it lag a little more than usual, so I decided to cold boot it. Booted bootloader, hit cold boot, and.... bootlooping. Awesome. No biggie, I'll just restore a backup. I waited for it to restore, and when it was finished, wiped cache and Dalvik, and.... bootlooping again. I tried wiping system and data. Still bootlooping. I downloaded Asus 's official firmware from their website, and flashed. Bootlooping. Someone help me fix this and get it back to stock firmware, so I can sell it and be done with it once and for all. I will never buy another Asus product again.
greydelta38 said:
First off, let me start out by saying that the Infinity is running on what is possibly the worst software ever designed. Props, Asus. You've made my life hell until the last second.
So, here's my problem. The tablet was working fine 24 hours ago. I turned it off last night, turned it on this morning, working great on CROMi-Xeno (which is awesome, it actually makes the tablet bearable.) and played on it for a while before turning off again. While playing it, I noticed it lag a little more than usual, so I decided to cold boot it. Booted bootloader, hit cold boot, and.... bootlooping. Awesome. No biggie, I'll just restore a backup. I waited for it to restore, and when it was finished, wiped cache and Dalvik, and.... bootlooping again. I tried wiping system and data. Still bootlooping. I downloaded Asus 's official firmware from their website, and flashed. Bootlooping. Someone help me fix this and get it back to stock firmware, so I can sell it and be done with it once and for all. I will never buy another Asus product again.
Click to expand...
Click to collapse
I'm wondering if my version of TWRP is too old or something. Can anyone explain in detail how to update to a newer version of TWRP or install CWM in order for flashing to fully work?
greydelta38 said:
I'm wondering if my version of TWRP is too old or something. Can anyone explain in detail how to update to a newer version of TWRP or install CWM in order for flashing to fully work?
Click to expand...
Click to collapse
what version do you currently have, just download the .blob from twrp's site boot into fastboot and run "fastboot flash recovery *name of blob*.blob"
JoinTheRealms said:
what version do you currently have, just download the .blob from twrp's site boot into fastboot and run "fastboot flash recovery *name of blob*.blob"
Click to expand...
Click to collapse
Yeah - I'm also wondering what bootloader you are running with it.
If you are not current on either flash the bootloader/TWRP package from CROMi-X OP, boot back into system, let it bootloop if it does, boot back into TWRP and reflash the rom.
That seems like it would be the only explanation, but now it won't even boot into recovery. I can get it into fastboot, but as soon as I select recovery image it shows the firmware upgrade symbol and then immediately shows the Android Error symbol, and sticks there until I hard power down. When I'm in fastboot, here's what I'm gonna do:
1. connect fastbooted Infinity to pc with all necessary drivers installed
2. download filename.blob from TWRP's website for the Infinity
3. on command console enter -fastboot flash recovery filename.blob- and it will push the recovery through fastboot hopefully
Is that correct? I'm under the impression that as long as I can get to the fastboot menu, ANYTHING is repairable.
greydelta38 said:
That seems like it would be the only explanation, but now it won't even boot into recovery. I can get it into fastboot, but as soon as I select recovery image it shows the firmware upgrade symbol and then immediately shows the Android Error symbol, and sticks there until I hard power down. When I'm in fastboot, here's what I'm gonna do:
1. connect fastbooted Infinity to pc with all necessary drivers installed
2. download filename.blob from TWRP's website for the Infinity
3. on command console enter -fastboot flash recovery filename.blob- and it will push the recovery through fastboot hopefully
Is that correct? I'm under the impression that as long as I can get to the fastboot menu, ANYTHING is repairable.
Click to expand...
Click to collapse
The command is
fastboot -i 0x0B05 flash recovery filename.blob
Since you can boot into the bootloader, check the version# and make sure you flash a compatible recovery.
Most of the time, as long as you can get into the BL, it's fixable. But to make it unbrickable you need nvFlash. And that's just become possible for or tablet on JB. May be a project for once you got this problem fixed: http://forum.xda-developers.com/showthread.php?t=2455925
I suspect you need to format data to fix the issues (you'll lose everything on the internal sd card) but before you do follow bernd's recommendation and get TWRP on there (you wiped it out when you flashed ASUS stock) and then use the file explorer in TWRP to copy anything important to an external SD and make sure the cromi-x rom is on sd too. Then format data from the wipe menu and reinstall. You'll be back to normal in no time. :good:
BTW You may have got some corruption from turning f-sync off.
berndblb said:
The command is
fastboot -i 0x0B05 flash recovery filename.blob
Since you can boot into the bootloader, check the version# and make sure you flash a compatible recovery.
Most of the time, as long as you can get into the BL, it's fixable. But to make it unbrickable you need nvFlash. And that's just become possible for or tablet on JB. May be a project for once you got this problem fixed: http://forum.xda-developers.com/showthread.php?t=2455925
Click to expand...
Click to collapse
sbdags said:
I suspect you need to format data to fix the issues (you'll lose everything on the internal sd card) but before you do follow bernd's recommendation and get TWRP on there (you wiped it out when you flashed ASUS stock) and then use the file explorer in TWRP to copy anything important to an external SD and make sure the cromi-x rom is on sd too. Then format data from the wipe menu and reinstall. You'll be back to normal in no time. :good:
BTW You may have got some corruption from turning f-sync off.
Click to expand...
Click to collapse
I tried wiping internal before recovery was lost and it didn't work. I suspected that some problems arose from turning fsync off too. I'm pushing TWRP 2.6 to the Infinity now, will try flashing your excellent rom again and see if it takes without bootlooping.
greydelta38 said:
I tried wiping internal before recovery was lost and it didn't work. I suspected that some problems arose from turning fsync off too. I'm pushing TWRP 2.6 to the Infinity now, will try flashing your excellent rom again and see if it takes without bootlooping.
Click to expand...
Click to collapse
You need to specifically format data in twrp not just wipe data. Only formatting will restore the device now once data corruption has occurred.
Hey guys,
I screwed something up flashing the latest twrp and now my internal partition only shows as 993 mb and I can't get past twrp. I tried moving a new twrp onto the sd card and flashing it using the 0P6BIMG.zip method and it flashed fine but same issue. If I try to restore my backup it gets like 1% in and fails.
Is there a way to just RUU everything back to normal? Sorry this is the first time I've done this to my M8.
Thanks!
teddykgb715 said:
Hey guys,
I screwed something up flashing the latest twrp and now my internal partition only shows as 993 mb and I can't get past twrp. I tried moving a new twrp onto the sd card and flashing it using the 0P6BIMG.zip method and it flashed fine but same issue. If I try to restore my backup it gets like 1% in and fails.
Is there a way to just RUU everything back to normal? Sorry this is the first time I've done this to my M8.
Thanks!
Click to expand...
Click to collapse
Hold POWER + VOLUME UP AND!! DOWN (should take around 10 seconds.. and in TWRP you will see the screen turn off so as soon as that happens follow what I say next)
hold until the screen turns off, as soon as that happens let go of everything BUT VOLUME DOWN -- see if this gets you into Fastboot...
teddykgb715 said:
Hey guys,
I screwed something up flashing the latest twrp and now my internal partition only shows as 993 mb and I can't get past twrp. I tried moving a new twrp onto the sd card and flashing it using the 0P6BIMG.zip method and it flashed fine but same issue. If I try to restore my backup it gets like 1% in and fails.
Is there a way to just RUU everything back to normal? Sorry this is the first time I've done this to my M8.
Thanks!
Click to expand...
Click to collapse
What happen is you flashed twrp to your system partition. What u need to do is boot to bootloader an enter the real recovery thru boot loader. Then you should be able to restore or flash a ROM. Make sure you go to bootloader then recovery so you r in the correct one. Try that an let me know.
Tigerstown said:
What happen is you flashed twrp to your system partition. What u need to do is boot to bootloader an enter the real recovery thru boot loader. Then you should be able to restore or flash a ROM. Make sure you go to bootloader then recovery so you r in the correct one. Try that an let me know.
Click to expand...
Click to collapse
Not there yet. Restore said successful but it still booted to twrp. Flashed a different rom and it booted up but then froze and now I'm doing that over again. The restores complete successfully but won't boot. My backup may be bad though so I'll flash again and report back.
teddykgb715 said:
Not there yet. Restore said successful but it still booted to twrp. Flashed a different rom and it booted up but then froze and now I'm doing that over again. The restores complete successfully but won't boot. My backup may be bad though so I'll flash again and report back.
Click to expand...
Click to collapse
And I'm back! Thank you!
teddykgb715 said:
And I'm back! Thank you!
Click to expand...
Click to collapse
No problem. Glad to help.
Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
No, but could you try the previous version of SuperSU? Just to rule out the new version that I haven't tested please?
I updated to 5.0.1 earlier
Flashed all the img files exact userdata and then booted in to Android.
I then flashed TWRP 2.8.1.0 and used that to flash SuperSU 2.37
All that worked fine.. I then did a play update and SuperSU updated to 2.40
All working fine as far as I can tell. Apps needing root are working!
iowabeakster said:
Hi all,
So I'm far from a noob at at all of this (doing the custom android thing for years). But I'm not exactly constantly fiddling with my phone all the time anymore either. Basically I get a set-up that works for me, and I stick with it.
I've patiently been waiting to update to Lollipop. And today I did it. I did it by flashing the required factory images with fastboot.
AND IT WORKS. No problem. It boots. I go through the initial set-up. I can let it restore all my apps and passwords from the google servers, etc. So far so good.
My problem is that I cannot root. After I try, it bootloops (stuck at the Google splash, with my unlocked icon).
I tried to root before my first boot. I tried after the initial boot (before set-up and signing in). I tried rooting after setting it all up, and singing in, and letting google restore all of my apps. No matter which sequence I try, it will reboot a couple times at the first Google splash, and then fall back to Recovery.
(So, I'm on back on my rooted 4.4.4 nandroid, I think it's Mahdi Rom-- I forget)
Vital Stats:
Trying to install factory images of 5.0.1, all stock (system, boot (kernel), radio, bootloader)
Factory reset
(the above works fine)
TWRP 2.8.1.0
SuperSU-v2.40 (flashed via recovery)
Any ideas? Thanks for any help.
Click to expand...
Click to collapse
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
BirchBarlow said:
Try not doing that? When you go through the initial configuration, choose "Set up as a new device". Maybe the restore is somehow corrupting SuperSU?
Click to expand...
Click to collapse
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
iowabeakster said:
It happens even if I try to root before setting anything up at all.
albert_htc,
Are you saying: I should also flash the stock recovery first. Then boot for the first time. Then re-flash TWRP. Then flash SuperSU.
I never flashed the stock recovery. TWRP was on already on it.
Thanks guys. I'll give it another rip (doing stock recovery, then flashing back to TWRP) sometime soon.
Click to expand...
Click to collapse
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
BirchBarlow said:
Yes, flash the factory image using the batch file so every partition gets re-flashed. Now I'm thinking maybe your recovery is corrupt.
Run flash-all.bat and when your device reboots, go through all of the initial configuration and download all of the Gapps updates. Once that's all completed, go ahead and route using TWRP. If you find yourself still having the same problem, try live booting TWRP to flash SuperSU.
Click to expand...
Click to collapse
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
iowabeakster said:
I'm not going to flash over my user data, nandroids, app back-ups, etc. I'll stay with kit kat forever on my nexus 5 before I do that. Version numbers aren't that important. Hours wasted getting things set-up again are.
My recovery works fine. Both on kit kat and lollipop. My only problem is a boot loop when I flash SuperSU (via TWRP), on lollipop. I will try flashing stock recovery, though and then reflashing TWRP.
Click to expand...
Click to collapse
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
snappycg1996 said:
It's a tedious process, but it really isn't all that hard to back everything up to a computer, and you can do it easily with fastboot and a single command line.
Or what I'd recommend doing is just booting up, backing up all folders to a PC and then resetting and restoring later, backup apps with Titanium Backup (what I always do). A lot of us flashed factory images when Lollipop came out, so it isn't that bad once you start on the road.
Click to expand...
Click to collapse
I just backed the /sdcard, to my PC. I just re-ran titanium.
I can deal with "/sdcard issues" from updating to lollipop easy enough. That's a 30 second fix. I can deal with setting up my email accounts to my email client app. I can deal with launcher settings, and all the other apps, widgets, etc. Those are things that I can slowly get back to where I want. They aren't critical. But yeah, very tedious.
I think "starting over" may be much more tedious for me than most people though. I run ssh servers and clients on all PCs, servers, and phones (disabling passwords and using rsa encryption keys for security). It's very nice, once I get it all set up in that I can access everything (from anything) very easily. I do need root for that though also.
But if I can't just hit a "restore" to get it all my ssh addresses, keys, fingerprits, etc back to where it was and then I have to: reverify new fingerprints, generate new keys, re-enable passwords to transmit new keys for everything, then disable passwords (for all machines) ... well... I just get very very grumpy.
anactoraaron said:
Have you tried rooting from the bootloader via Chainfire's cf-auto root? I know I've read that sometimes rooting from recovery doesn't work properly, and that only certain zips will work. I've used the auto root each time (from stock fastboot flashing 5.0 & 5.0.1) with lollipop and it works fine. Link
Unzip and run batch file in bootloader. It will wipe everything if you haven't already unlocked bootloader (fastboot oem unlock). If you are already unlocked it won't wipe anything.
Click to expand...
Click to collapse
I'll check that out. Thanks.
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Click to expand...
Click to collapse
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
twrp not boot after successfully flash in this rom
Sanarise said:
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
Click to expand...
Click to collapse
flash latest twrp download from github, install twrpbuilder img twrp ,it boot fine and you will copy your data to pc and then install any other twrp img which u want , dont wipe anything from phone before phone boot.flash only original twrp builder 3.2.3.1 official,it boot only on latest updates.
Why nobody use orangefox?
is your issue solve or not tell,
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
first click on extract a fastboot rom and copy boot system and vender file with flash.all bat file and make a new folder then click on flash.bat save user data file to flash these images
or you can do this manually
fastboot flash system system.img
fastboot flash vender vender.img
fastboot flash boot boot.img
then reboot device to fastboot again
now flash latest official twrp builder 3.2.3.1 img twrp and take all your data backup,
in fastboot flash latest miui do not downgrade direct otherwise you lost your data,
after this if you sucess then you can flash your old rom which is running before issue of boot loop of redmi logo
it will deincrypt your data safely and then root device and boot normally, if you lost anything then contact me with mail or whatsapp i will help you,7009197673 india
and this twrp work on all version from chines to global beta stable and indian stable
joke19 said:
Why nobody use orangefox?
Click to expand...
Click to collapse
In the end, I did try orangefox, and it might have been part of why it worked.
However, the crDroid installation instructions specifically mentions using Peter's TWRP, so I initially used that one.
anmoltinder said:
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
Click to expand...
Click to collapse
Thank you for the effort you put into typing up a guide to help me, but I ended up fixing my own problem.
I was able to use fastboot to flash on a better TWRP release, and then get the rom to install properly by installing fcrypt-disabler just after it.
Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Click to expand...
Click to collapse
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Fcsubxrhi said:
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Click to expand...
Click to collapse
If you can access fastboot, then flash TWRP.... Enter recovery, wipe your system partitions and then flash the Stock MIUI ROM or use the MiFlash tool. Make sure you aren't flashing an older version of the ROM than the onle already installed.
CongestedHangman said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
I have the same problem that stated after installing the update for derpfest and I can boot into twrp. Any solution for me?
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.